blob: b749c82edebd1a0b7ea70c429c29fadda9571448 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas RZ/G2L combined Pin and GPIO controller
maintainers:
- Geert Uytterhoeven <geert+renesas@glider.be>
- Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
description:
The Renesas SoCs of the RZ/G2L series feature a combined Pin and GPIO
controller.
Pin multiplexing and GPIO configuration is performed on a per-pin basis.
Each port features up to 8 pins, each of them configurable for GPIO function
(port mode) or in alternate function mode.
Up to 8 different alternate function modes exist for each single pin.
properties:
compatible:
enum:
- renesas,r9a07g044-pinctrl # RZ/G2{L,LC}
reg:
maxItems: 1
gpio-controller: true
'#gpio-cells':
const: 2
description:
The first cell contains the global GPIO port index, constructed using the
RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the
second cell represents consumer flag as mentioned in ../gpio/gpio.txt
E.g. "RZG2L_GPIO(39, 1)" for P39_1.
gpio-ranges:
maxItems: 1
clocks:
maxItems: 1
power-domains:
maxItems: 1
resets:
items:
- description: GPIO_RSTN signal
- description: GPIO_PORT_RESETN signal
- description: GPIO_SPARE_RESETN signal
additionalProperties:
anyOf:
- type: object
allOf:
- $ref: pincfg-node.yaml#
- $ref: pinmux-node.yaml#
description:
Pin controller client devices use pin configuration subnodes (children
and grandchildren) for desired pin configuration.
Client device subnodes use below standard properties.
properties:
phandle: true
pinmux:
description:
Values are constructed from GPIO port number, pin number, and
alternate function configuration number using the RZG2L_PORT_PINMUX()
helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>.
pins: true
drive-strength:
enum: [ 2, 4, 8, 12 ]
output-impedance-ohms:
enum: [ 33, 50, 66, 100 ]
power-source:
enum: [ 1800, 2500, 3300 ]
slew-rate: true
gpio-hog: true
gpios: true
input-enable: true
output-high: true
output-low: true
line-name: true
- type: object
properties:
phandle: true
additionalProperties:
$ref: "#/additionalProperties/anyOf/0"
allOf:
- $ref: "pinctrl.yaml#"
required:
- compatible
- reg
- gpio-controller
- '#gpio-cells'
- gpio-ranges
- clocks
- power-domains
- resets
examples:
- |
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
#include <dt-bindings/clock/r9a07g044-cpg.h>
pinctrl: pinctrl@11030000 {
compatible = "renesas,r9a07g044-pinctrl";
reg = <0x11030000 0x10000>;
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl 0 0 392>;
clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>;
resets = <&cpg R9A07G044_GPIO_RSTN>,
<&cpg R9A07G044_GPIO_PORT_RESETN>,
<&cpg R9A07G044_GPIO_SPARE_RESETN>;
power-domains = <&cpg>;
scif0_pins: serial0 {
pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* Tx */
<RZG2L_PORT_PINMUX(38, 1, 1)>; /* Rx */
};
i2c1_pins: i2c1 {
pins = "RIIC1_SDA", "RIIC1_SCL";
input-enable;
};
sd1-pwr-en-hog {
gpio-hog;
gpios = <RZG2L_GPIO(39, 2) 0>;
output-high;
line-name = "sd1_pwr_en";
};
sdhi1_pins: sd1 {
sd1_mux {
pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */
<RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */
power-source = <3300>;
};
sd1_data {
pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3";
power-source = <3300>;
};
sd1_ctrl {
pins = "SD1_CLK", "SD1_CMD";
power-source = <3300>;
};
};
};