| # SPDX-License-Identifier: GPL-2.0 |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Binding for TI/National Semiconductor LP8727 Charger |
| |
| maintainers: |
| - Sebastian Reichel <sre@kernel.org> |
| |
| allOf: |
| - $ref: power-supply.yaml# |
| |
| properties: |
| compatible: |
| const: ti,lp8727 |
| |
| reg: |
| const: 0x27 |
| |
| interrupts: |
| maxItems: 1 |
| |
| debounce-ms: |
| description: interrupt debounce time in ms |
| |
| patternProperties: |
| '^(ac|usb)$': |
| type: object |
| description: USB/AC charging parameters |
| properties: |
| charger-type: |
| enum: |
| - ac |
| - usb |
| |
| eoc-level: |
| $ref: /schemas/types.yaml#/definitions/uint8 |
| minimum: 0 |
| maximum: 6 |
| description: | |
| End of Charge Percentage with the following mapping: |
| 0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50% |
| |
| charging-current: |
| $ref: /schemas/types.yaml#/definitions/uint8 |
| minimum: 0 |
| maximum: 9 |
| description: | |
| Charging current with the following mapping: |
| 0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA, |
| 6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA |
| |
| required: |
| - compatible |
| - reg |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/irq.h> |
| i2c0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| lp8727: charger@27 { |
| compatible = "ti,lp8727"; |
| reg = <0x27>; |
| interrupt-parent = <&gpio5>; |
| interrupts = <6 IRQ_TYPE_EDGE_FALLING>; |
| debounce-ms = <300>; |
| |
| /* AC charger: 5% EOC and 500mA charging current */ |
| ac { |
| charger-type = "ac"; |
| eoc-level = /bits/ 8 <0>; |
| charging-current = /bits/ 8 <4>; |
| }; |
| |
| /* USB charger: 10% EOC and 400mA charging current */ |
| usb { |
| charger-type = "usb"; |
| eoc-level = /bits/ 8 <1>; |
| charging-current = /bits/ 8 <2>; |
| }; |
| }; |
| }; |
| |