| # SPDX-License-Identifier: GPL-2.0-only |
| # Copyright (C) 2020 Renesas Electronics Corp. |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/thermal/rcar-gen3-thermal.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Renesas R-Car Gen3 Thermal Sensor |
| |
| description: |
| On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal |
| sensors (THS) which are the analog circuits for measuring temperature (Tj) |
| inside the LSI. |
| |
| maintainers: |
| - Niklas Söderlund <niklas.soderlund@ragnatech.se> |
| |
| properties: |
| compatible: |
| enum: |
| - renesas,r8a774a1-thermal # RZ/G2M |
| - renesas,r8a774b1-thermal # RZ/G2N |
| - renesas,r8a774e1-thermal # RZ/G2H |
| - renesas,r8a7795-thermal # R-Car H3 |
| - renesas,r8a7796-thermal # R-Car M3-W |
| - renesas,r8a77961-thermal # R-Car M3-W+ |
| - renesas,r8a77965-thermal # R-Car M3-N |
| - renesas,r8a77980-thermal # R-Car V3H |
| - renesas,r8a779a0-thermal # R-Car V3U |
| |
| reg: true |
| |
| interrupts: |
| items: |
| - description: TEMP1 interrupt |
| - description: TEMP2 interrupt |
| - description: TEMP3 interrupt |
| |
| clocks: |
| maxItems: 1 |
| |
| power-domains: |
| maxItems: 1 |
| |
| resets: |
| maxItems: 1 |
| |
| "#thermal-sensor-cells": |
| const: 1 |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - power-domains |
| - resets |
| - "#thermal-sensor-cells" |
| |
| if: |
| not: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - renesas,r8a779a0-thermal |
| then: |
| properties: |
| reg: |
| minItems: 2 |
| maxItems: 3 |
| items: |
| - description: TSC1 registers |
| - description: TSC2 registers |
| - description: TSC3 registers |
| required: |
| - interrupts |
| else: |
| properties: |
| reg: |
| items: |
| - description: TSC0 registers |
| - description: TSC1 registers |
| - description: TSC2 registers |
| - description: TSC3 registers |
| - description: TSC4 registers |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/clock/r8a7795-cpg-mssr.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/r8a7795-sysc.h> |
| |
| tsc: thermal@e6198000 { |
| compatible = "renesas,r8a7795-thermal"; |
| reg = <0xe6198000 0x100>, |
| <0xe61a0000 0x100>, |
| <0xe61a8000 0x100>; |
| interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 522>; |
| power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; |
| resets = <&cpg 522>; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| thermal-zones { |
| sensor_thermal: sensor-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| thermal-sensors = <&tsc 0>; |
| |
| trips { |
| sensor1_crit: sensor1-crit { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| }; |
| - | |
| #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/power/r8a779a0-sysc.h> |
| |
| tsc_r8a779a0: thermal@e6190000 { |
| compatible = "renesas,r8a779a0-thermal"; |
| reg = <0xe6190000 0x200>, |
| <0xe6198000 0x200>, |
| <0xe61a0000 0x200>, |
| <0xe61a8000 0x200>, |
| <0xe61b0000 0x200>; |
| clocks = <&cpg CPG_MOD 919>; |
| power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; |
| resets = <&cpg 919>; |
| #thermal-sensor-cells = <1>; |
| }; |