| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Device driver for monitoring ambient light intensity in (lux) and proximity |
| * detection (prox) within the TAOS TSL2571, TSL2671, TMD2671, TSL2771, TMD2771, |
| * TSL2572, TSL2672, TMD2672, TSL2772, and TMD2772 devices. |
| * |
| * Copyright (c) 2012, TAOS Corporation. |
| * Copyright (c) 2017-2018 Brian Masney <masneyb@onstation.org> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/slab.h> |
| #include <linux/iio/events.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/platform_data/tsl2772.h> |
| #include <linux/regulator/consumer.h> |
| |
| /* Cal defs */ |
| #define PROX_STAT_CAL 0 |
| #define PROX_STAT_SAMP 1 |
| #define MAX_SAMPLES_CAL 200 |
| |
| /* TSL2772 Device ID */ |
| #define TRITON_ID 0x00 |
| #define SWORDFISH_ID 0x30 |
| #define HALIBUT_ID 0x20 |
| |
| /* Lux calculation constants */ |
| #define TSL2772_LUX_CALC_OVER_FLOW 65535 |
| |
| /* |
| * TAOS Register definitions - Note: depending on device, some of these register |
| * are not used and the register address is benign. |
| */ |
| |
| /* Register offsets */ |
| #define TSL2772_MAX_CONFIG_REG 16 |
| |
| /* Device Registers and Masks */ |
| #define TSL2772_CNTRL 0x00 |
| #define TSL2772_ALS_TIME 0X01 |
| #define TSL2772_PRX_TIME 0x02 |
| #define TSL2772_WAIT_TIME 0x03 |
| #define TSL2772_ALS_MINTHRESHLO 0X04 |
| #define TSL2772_ALS_MINTHRESHHI 0X05 |
| #define TSL2772_ALS_MAXTHRESHLO 0X06 |
| #define TSL2772_ALS_MAXTHRESHHI 0X07 |
| #define TSL2772_PRX_MINTHRESHLO 0X08 |
| #define TSL2772_PRX_MINTHRESHHI 0X09 |
| #define TSL2772_PRX_MAXTHRESHLO 0X0A |
| #define TSL2772_PRX_MAXTHRESHHI 0X0B |
| #define TSL2772_PERSISTENCE 0x0C |
| #define TSL2772_ALS_PRX_CONFIG 0x0D |
| #define TSL2772_PRX_COUNT 0x0E |
| #define TSL2772_GAIN 0x0F |
| #define TSL2772_NOTUSED 0x10 |
| #define TSL2772_REVID 0x11 |
| #define TSL2772_CHIPID 0x12 |
| #define TSL2772_STATUS 0x13 |
| #define TSL2772_ALS_CHAN0LO 0x14 |
| #define TSL2772_ALS_CHAN0HI 0x15 |
| #define TSL2772_ALS_CHAN1LO 0x16 |
| #define TSL2772_ALS_CHAN1HI 0x17 |
| #define TSL2772_PRX_LO 0x18 |
| #define TSL2772_PRX_HI 0x19 |
| |
| /* tsl2772 cmd reg masks */ |
| #define TSL2772_CMD_REG 0x80 |
| #define TSL2772_CMD_SPL_FN 0x60 |
| #define TSL2772_CMD_REPEAT_PROTO 0x00 |
| #define TSL2772_CMD_AUTOINC_PROTO 0x20 |
| |
| #define TSL2772_CMD_PROX_INT_CLR 0X05 |
| #define TSL2772_CMD_ALS_INT_CLR 0x06 |
| #define TSL2772_CMD_PROXALS_INT_CLR 0X07 |
| |
| /* tsl2772 cntrl reg masks */ |
| #define TSL2772_CNTL_ADC_ENBL 0x02 |
| #define TSL2772_CNTL_PWR_ON 0x01 |
| |
| /* tsl2772 status reg masks */ |
| #define TSL2772_STA_ADC_VALID 0x01 |
| #define TSL2772_STA_PRX_VALID 0x02 |
| #define TSL2772_STA_ADC_PRX_VALID (TSL2772_STA_ADC_VALID | \ |
| TSL2772_STA_PRX_VALID) |
| #define TSL2772_STA_ALS_INTR 0x10 |
| #define TSL2772_STA_PRX_INTR 0x20 |
| |
| /* tsl2772 cntrl reg masks */ |
| #define TSL2772_CNTL_REG_CLEAR 0x00 |
| #define TSL2772_CNTL_PROX_INT_ENBL 0X20 |
| #define TSL2772_CNTL_ALS_INT_ENBL 0X10 |
| #define TSL2772_CNTL_WAIT_TMR_ENBL 0X08 |
| #define TSL2772_CNTL_PROX_DET_ENBL 0X04 |
| #define TSL2772_CNTL_PWRON 0x01 |
| #define TSL2772_CNTL_ALSPON_ENBL 0x03 |
| #define TSL2772_CNTL_INTALSPON_ENBL 0x13 |
| #define TSL2772_CNTL_PROXPON_ENBL 0x0F |
| #define TSL2772_CNTL_INTPROXPON_ENBL 0x2F |
| |
| #define TSL2772_ALS_GAIN_TRIM_MIN 250 |
| #define TSL2772_ALS_GAIN_TRIM_MAX 4000 |
| |
| #define TSL2772_MAX_PROX_LEDS 2 |
| |
| #define TSL2772_BOOT_MIN_SLEEP_TIME 10000 |
| #define TSL2772_BOOT_MAX_SLEEP_TIME 28000 |
| |
| /* Device family members */ |
| enum { |
| tsl2571, |
| tsl2671, |
| tmd2671, |
| tsl2771, |
| tmd2771, |
| tsl2572, |
| tsl2672, |
| tmd2672, |
| tsl2772, |
| tmd2772, |
| apds9930, |
| }; |
| |
| enum { |
| TSL2772_CHIP_UNKNOWN = 0, |
| TSL2772_CHIP_WORKING = 1, |
| TSL2772_CHIP_SUSPENDED = 2 |
| }; |
| |
| enum { |
| TSL2772_SUPPLY_VDD = 0, |
| TSL2772_SUPPLY_VDDIO = 1, |
| TSL2772_NUM_SUPPLIES = 2 |
| }; |
| |
| /* Per-device data */ |
| struct tsl2772_als_info { |
| u16 als_ch0; |
| u16 als_ch1; |
| u16 lux; |
| }; |
| |
| struct tsl2772_chip_info { |
| int chan_table_elements; |
| struct iio_chan_spec channel_with_events[4]; |
| struct iio_chan_spec channel_without_events[4]; |
| const struct iio_info *info; |
| }; |
| |
| static const int tsl2772_led_currents[][2] = { |
| { 100000, TSL2772_100_mA }, |
| { 50000, TSL2772_50_mA }, |
| { 25000, TSL2772_25_mA }, |
| { 13000, TSL2772_13_mA }, |
| { 0, 0 } |
| }; |
| |
| struct tsl2772_chip { |
| kernel_ulong_t id; |
| struct mutex prox_mutex; |
| struct mutex als_mutex; |
| struct i2c_client *client; |
| struct regulator_bulk_data supplies[TSL2772_NUM_SUPPLIES]; |
| u16 prox_data; |
| struct tsl2772_als_info als_cur_info; |
| struct tsl2772_settings settings; |
| struct tsl2772_platform_data *pdata; |
| int als_gain_time_scale; |
| int als_saturation; |
| int tsl2772_chip_status; |
| u8 tsl2772_config[TSL2772_MAX_CONFIG_REG]; |
| const struct tsl2772_chip_info *chip_info; |
| const struct iio_info *info; |
| s64 event_timestamp; |
| /* |
| * This structure is intentionally large to accommodate |
| * updates via sysfs. |
| * Sized to 9 = max 8 segments + 1 termination segment |
| */ |
| struct tsl2772_lux tsl2772_device_lux[TSL2772_MAX_LUX_TABLE_SIZE]; |
| }; |
| |
| /* |
| * Different devices require different coefficents, and these numbers were |
| * derived from the 'Lux Equation' section of the various device datasheets. |
| * All of these coefficients assume a Glass Attenuation (GA) factor of 1. |
| * The coefficients are multiplied by 1000 to avoid floating point operations. |
| * The two rows in each table correspond to the Lux1 and Lux2 equations from |
| * the datasheets. |
| */ |
| static const struct tsl2772_lux tsl2x71_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = { |
| { 53000, 106000 }, |
| { 31800, 53000 }, |
| { 0, 0 }, |
| }; |
| |
| static const struct tsl2772_lux tmd2x71_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = { |
| { 24000, 48000 }, |
| { 14400, 24000 }, |
| { 0, 0 }, |
| }; |
| |
| static const struct tsl2772_lux tsl2x72_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = { |
| { 60000, 112200 }, |
| { 37800, 60000 }, |
| { 0, 0 }, |
| }; |
| |
| static const struct tsl2772_lux tmd2x72_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = { |
| { 20000, 35000 }, |
| { 12600, 20000 }, |
| { 0, 0 }, |
| }; |
| |
| static const struct tsl2772_lux apds9930_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = { |
| { 52000, 96824 }, |
| { 38792, 67132 }, |
| { 0, 0 }, |
| }; |
| |
| static const struct tsl2772_lux *tsl2772_default_lux_table_group[] = { |
| [tsl2571] = tsl2x71_lux_table, |
| [tsl2671] = tsl2x71_lux_table, |
| [tmd2671] = tmd2x71_lux_table, |
| [tsl2771] = tsl2x71_lux_table, |
| [tmd2771] = tmd2x71_lux_table, |
| [tsl2572] = tsl2x72_lux_table, |
| [tsl2672] = tsl2x72_lux_table, |
| [tmd2672] = tmd2x72_lux_table, |
| [tsl2772] = tsl2x72_lux_table, |
| [tmd2772] = tmd2x72_lux_table, |
| [apds9930] = apds9930_lux_table, |
| }; |
| |
| static const struct tsl2772_settings tsl2772_default_settings = { |
| .als_time = 255, /* 2.72 / 2.73 ms */ |
| .als_gain = 0, |
| .prox_time = 255, /* 2.72 / 2.73 ms */ |
| .prox_gain = 0, |
| .wait_time = 255, |
| .als_prox_config = 0, |
| .als_gain_trim = 1000, |
| .als_cal_target = 150, |
| .als_persistence = 1, |
| .als_interrupt_en = false, |
| .als_thresh_low = 200, |
| .als_thresh_high = 256, |
| .prox_persistence = 1, |
| .prox_interrupt_en = false, |
| .prox_thres_low = 0, |
| .prox_thres_high = 512, |
| .prox_max_samples_cal = 30, |
| .prox_pulse_count = 8, |
| .prox_diode = TSL2772_DIODE1, |
| .prox_power = TSL2772_100_mA |
| }; |
| |
| static const s16 tsl2772_als_gain[] = { |
| 1, |
| 8, |
| 16, |
| 120 |
| }; |
| |
| static const s16 tsl2772_prox_gain[] = { |
| 1, |
| 2, |
| 4, |
| 8 |
| }; |
| |
| static const int tsl2772_int_time_avail[][6] = { |
| [tsl2571] = { 0, 2720, 0, 2720, 0, 696000 }, |
| [tsl2671] = { 0, 2720, 0, 2720, 0, 696000 }, |
| [tmd2671] = { 0, 2720, 0, 2720, 0, 696000 }, |
| [tsl2771] = { 0, 2720, 0, 2720, 0, 696000 }, |
| [tmd2771] = { 0, 2720, 0, 2720, 0, 696000 }, |
| [tsl2572] = { 0, 2730, 0, 2730, 0, 699000 }, |
| [tsl2672] = { 0, 2730, 0, 2730, 0, 699000 }, |
| [tmd2672] = { 0, 2730, 0, 2730, 0, 699000 }, |
| [tsl2772] = { 0, 2730, 0, 2730, 0, 699000 }, |
| [tmd2772] = { 0, 2730, 0, 2730, 0, 699000 }, |
| [apds9930] = { 0, 2730, 0, 2730, 0, 699000 }, |
| }; |
| |
| static int tsl2772_int_calibscale_avail[] = { 1, 8, 16, 120 }; |
| |
| static int tsl2772_prox_calibscale_avail[] = { 1, 2, 4, 8 }; |
| |
| /* Channel variations */ |
| enum { |
| ALS, |
| PRX, |
| ALSPRX, |
| PRX2, |
| ALSPRX2, |
| }; |
| |
| static const u8 device_channel_config[] = { |
| [tsl2571] = ALS, |
| [tsl2671] = PRX, |
| [tmd2671] = PRX, |
| [tsl2771] = ALSPRX, |
| [tmd2771] = ALSPRX, |
| [tsl2572] = ALS, |
| [tsl2672] = PRX2, |
| [tmd2672] = PRX2, |
| [tsl2772] = ALSPRX2, |
| [tmd2772] = ALSPRX2, |
| [apds9930] = ALSPRX2, |
| }; |
| |
| static int tsl2772_read_status(struct tsl2772_chip *chip) |
| { |
| int ret; |
| |
| ret = i2c_smbus_read_byte_data(chip->client, |
| TSL2772_CMD_REG | TSL2772_STATUS); |
| if (ret < 0) |
| dev_err(&chip->client->dev, |
| "%s: failed to read STATUS register: %d\n", __func__, |
| ret); |
| |
| return ret; |
| } |
| |
| static int tsl2772_write_control_reg(struct tsl2772_chip *chip, u8 data) |
| { |
| int ret; |
| |
| ret = i2c_smbus_write_byte_data(chip->client, |
| TSL2772_CMD_REG | TSL2772_CNTRL, data); |
| if (ret < 0) { |
| dev_err(&chip->client->dev, |
| "%s: failed to write to control register %x: %d\n", |
| __func__, data, ret); |
| } |
| |
| return ret; |
| } |
| |
| static int tsl2772_read_autoinc_regs(struct tsl2772_chip *chip, int lower_reg, |
| int upper_reg) |
| { |
| u8 buf[2]; |
| int ret; |
| |
| ret = i2c_smbus_write_byte(chip->client, |
| TSL2772_CMD_REG | TSL2772_CMD_AUTOINC_PROTO | |
| lower_reg); |
| if (ret < 0) { |
| dev_err(&chip->client->dev, |
| "%s: failed to enable auto increment protocol: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| ret = i2c_smbus_read_byte_data(chip->client, |
| TSL2772_CMD_REG | lower_reg); |
| if (ret < 0) { |
| dev_err(&chip->client->dev, |
| "%s: failed to read from register %x: %d\n", __func__, |
| lower_reg, ret); |
| return ret; |
| } |
| buf[0] = ret; |
| |
| ret = i2c_smbus_read_byte_data(chip->client, |
| TSL2772_CMD_REG | upper_reg); |
| if (ret < 0) { |
| dev_err(&chip->client->dev, |
| "%s: failed to read from register %x: %d\n", __func__, |
| upper_reg, ret); |
| return ret; |
| } |
| buf[1] = ret; |
| |
| ret = i2c_smbus_write_byte(chip->client, |
| TSL2772_CMD_REG | TSL2772_CMD_REPEAT_PROTO | |
| lower_reg); |
| if (ret < 0) { |
| dev_err(&chip->client->dev, |
| "%s: failed to enable repeated byte protocol: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| return le16_to_cpup((const __le16 *)&buf[0]); |
| } |
| |
| /** |
| * tsl2772_get_lux() - Reads and calculates current lux value. |
| * @indio_dev: pointer to IIO device |
| * |
| * The raw ch0 and ch1 values of the ambient light sensed in the last |
| * integration cycle are read from the device. The raw values are multiplied |
| * by a device-specific scale factor, and divided by the integration time and |
| * device gain. The code supports multiple lux equations through the lux table |
| * coefficients. A lux gain trim is applied to each lux equation, and then the |
| * maximum lux within the interval 0..65535 is selected. |
| */ |
| static int tsl2772_get_lux(struct iio_dev *indio_dev) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| struct tsl2772_lux *p; |
| int max_lux, ret; |
| bool overflow; |
| |
| mutex_lock(&chip->als_mutex); |
| |
| if (chip->tsl2772_chip_status != TSL2772_CHIP_WORKING) { |
| dev_err(&chip->client->dev, "%s: device is not enabled\n", |
| __func__); |
| ret = -EBUSY; |
| goto out_unlock; |
| } |
| |
| ret = tsl2772_read_status(chip); |
| if (ret < 0) |
| goto out_unlock; |
| |
| if (!(ret & TSL2772_STA_ADC_VALID)) { |
| dev_err(&chip->client->dev, |
| "%s: data not valid yet\n", __func__); |
| ret = chip->als_cur_info.lux; /* return LAST VALUE */ |
| goto out_unlock; |
| } |
| |
| ret = tsl2772_read_autoinc_regs(chip, TSL2772_ALS_CHAN0LO, |
| TSL2772_ALS_CHAN0HI); |
| if (ret < 0) |
| goto out_unlock; |
| chip->als_cur_info.als_ch0 = ret; |
| |
| ret = tsl2772_read_autoinc_regs(chip, TSL2772_ALS_CHAN1LO, |
| TSL2772_ALS_CHAN1HI); |
| if (ret < 0) |
| goto out_unlock; |
| chip->als_cur_info.als_ch1 = ret; |
| |
| if (chip->als_cur_info.als_ch0 >= chip->als_saturation) { |
| max_lux = TSL2772_LUX_CALC_OVER_FLOW; |
| goto update_struct_with_max_lux; |
| } |
| |
| if (!chip->als_cur_info.als_ch0) { |
| /* have no data, so return LAST VALUE */ |
| ret = chip->als_cur_info.lux; |
| goto out_unlock; |
| } |
| |
| max_lux = 0; |
| overflow = false; |
| for (p = (struct tsl2772_lux *)chip->tsl2772_device_lux; p->ch0 != 0; |
| p++) { |
| int lux; |
| |
| lux = ((chip->als_cur_info.als_ch0 * p->ch0) - |
| (chip->als_cur_info.als_ch1 * p->ch1)) / |
| chip->als_gain_time_scale; |
| |
| /* |
| * The als_gain_trim can have a value within the range 250..4000 |
| * and is a multiplier for the lux. A trim of 1000 makes no |
| * changes to the lux, less than 1000 scales it down, and |
| * greater than 1000 scales it up. |
| */ |
| lux = (lux * chip->settings.als_gain_trim) / 1000; |
| |
| if (lux > TSL2772_LUX_CALC_OVER_FLOW) { |
| overflow = true; |
| continue; |
| } |
| |
| max_lux = max(max_lux, lux); |
| } |
| |
| if (overflow && max_lux == 0) |
| max_lux = TSL2772_LUX_CALC_OVER_FLOW; |
| |
| update_struct_with_max_lux: |
| chip->als_cur_info.lux = max_lux; |
| ret = max_lux; |
| |
| out_unlock: |
| mutex_unlock(&chip->als_mutex); |
| |
| return ret; |
| } |
| |
| /** |
| * tsl2772_get_prox() - Reads proximity data registers and updates |
| * chip->prox_data. |
| * |
| * @indio_dev: pointer to IIO device |
| */ |
| static int tsl2772_get_prox(struct iio_dev *indio_dev) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| int ret; |
| |
| mutex_lock(&chip->prox_mutex); |
| |
| ret = tsl2772_read_status(chip); |
| if (ret < 0) |
| goto prox_poll_err; |
| |
| switch (chip->id) { |
| case tsl2571: |
| case tsl2671: |
| case tmd2671: |
| case tsl2771: |
| case tmd2771: |
| if (!(ret & TSL2772_STA_ADC_VALID)) { |
| ret = -EINVAL; |
| goto prox_poll_err; |
| } |
| break; |
| case tsl2572: |
| case tsl2672: |
| case tmd2672: |
| case tsl2772: |
| case tmd2772: |
| case apds9930: |
| if (!(ret & TSL2772_STA_PRX_VALID)) { |
| ret = -EINVAL; |
| goto prox_poll_err; |
| } |
| break; |
| } |
| |
| ret = tsl2772_read_autoinc_regs(chip, TSL2772_PRX_LO, TSL2772_PRX_HI); |
| if (ret < 0) |
| goto prox_poll_err; |
| chip->prox_data = ret; |
| |
| prox_poll_err: |
| mutex_unlock(&chip->prox_mutex); |
| |
| return ret; |
| } |
| |
| static int tsl2772_read_prox_led_current(struct tsl2772_chip *chip) |
| { |
| struct device_node *of_node = chip->client->dev.of_node; |
| int ret, tmp, i; |
| |
| ret = of_property_read_u32(of_node, "led-max-microamp", &tmp); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; tsl2772_led_currents[i][0] != 0; i++) { |
| if (tmp == tsl2772_led_currents[i][0]) { |
| chip->settings.prox_power = tsl2772_led_currents[i][1]; |
| return 0; |
| } |
| } |
| |
| dev_err(&chip->client->dev, "Invalid value %d for led-max-microamp\n", |
| tmp); |
| |
| return -EINVAL; |
| |
| } |
| |
| static int tsl2772_read_prox_diodes(struct tsl2772_chip *chip) |
| { |
| struct device_node *of_node = chip->client->dev.of_node; |
| int i, ret, num_leds, prox_diode_mask; |
| u32 leds[TSL2772_MAX_PROX_LEDS]; |
| |
| ret = of_property_count_u32_elems(of_node, "amstaos,proximity-diodes"); |
| if (ret < 0) |
| return ret; |
| |
| num_leds = ret; |
| if (num_leds > TSL2772_MAX_PROX_LEDS) |
| num_leds = TSL2772_MAX_PROX_LEDS; |
| |
| ret = of_property_read_u32_array(of_node, "amstaos,proximity-diodes", |
| leds, num_leds); |
| if (ret < 0) { |
| dev_err(&chip->client->dev, |
| "Invalid value for amstaos,proximity-diodes: %d.\n", |
| ret); |
| return ret; |
| } |
| |
| prox_diode_mask = 0; |
| for (i = 0; i < num_leds; i++) { |
| if (leds[i] == 0) |
| prox_diode_mask |= TSL2772_DIODE0; |
| else if (leds[i] == 1) |
| prox_diode_mask |= TSL2772_DIODE1; |
| else { |
| dev_err(&chip->client->dev, |
| "Invalid value %d in amstaos,proximity-diodes.\n", |
| leds[i]); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void tsl2772_parse_dt(struct tsl2772_chip *chip) |
| { |
| tsl2772_read_prox_led_current(chip); |
| tsl2772_read_prox_diodes(chip); |
| } |
| |
| /** |
| * tsl2772_defaults() - Populates the device nominal operating parameters |
| * with those provided by a 'platform' data struct or |
| * with prefined defaults. |
| * |
| * @chip: pointer to device structure. |
| */ |
| static void tsl2772_defaults(struct tsl2772_chip *chip) |
| { |
| /* If Operational settings defined elsewhere.. */ |
| if (chip->pdata && chip->pdata->platform_default_settings) |
| memcpy(&chip->settings, chip->pdata->platform_default_settings, |
| sizeof(tsl2772_default_settings)); |
| else |
| memcpy(&chip->settings, &tsl2772_default_settings, |
| sizeof(tsl2772_default_settings)); |
| |
| /* Load up the proper lux table. */ |
| if (chip->pdata && chip->pdata->platform_lux_table[0].ch0 != 0) |
| memcpy(chip->tsl2772_device_lux, |
| chip->pdata->platform_lux_table, |
| sizeof(chip->pdata->platform_lux_table)); |
| else |
| memcpy(chip->tsl2772_device_lux, |
| tsl2772_default_lux_table_group[chip->id], |
| TSL2772_DEFAULT_TABLE_BYTES); |
| |
| tsl2772_parse_dt(chip); |
| } |
| |
| /** |
| * tsl2772_als_calibrate() - Obtain single reading and calculate |
| * the als_gain_trim. |
| * |
| * @indio_dev: pointer to IIO device |
| */ |
| static int tsl2772_als_calibrate(struct iio_dev *indio_dev) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| int ret, lux_val; |
| |
| ret = i2c_smbus_read_byte_data(chip->client, |
| TSL2772_CMD_REG | TSL2772_CNTRL); |
| if (ret < 0) { |
| dev_err(&chip->client->dev, |
| "%s: failed to read from the CNTRL register\n", |
| __func__); |
| return ret; |
| } |
| |
| if ((ret & (TSL2772_CNTL_ADC_ENBL | TSL2772_CNTL_PWR_ON)) |
| != (TSL2772_CNTL_ADC_ENBL | TSL2772_CNTL_PWR_ON)) { |
| dev_err(&chip->client->dev, |
| "%s: Device is not powered on and/or ADC is not enabled\n", |
| __func__); |
| return -EINVAL; |
| } else if ((ret & TSL2772_STA_ADC_VALID) != TSL2772_STA_ADC_VALID) { |
| dev_err(&chip->client->dev, |
| "%s: The two ADC channels have not completed an integration cycle\n", |
| __func__); |
| return -ENODATA; |
| } |
| |
| lux_val = tsl2772_get_lux(indio_dev); |
| if (lux_val < 0) { |
| dev_err(&chip->client->dev, |
| "%s: failed to get lux\n", __func__); |
| return lux_val; |
| } |
| if (lux_val == 0) |
| return -ERANGE; |
| |
| ret = (chip->settings.als_cal_target * chip->settings.als_gain_trim) / |
| lux_val; |
| if (ret < TSL2772_ALS_GAIN_TRIM_MIN || ret > TSL2772_ALS_GAIN_TRIM_MAX) |
| return -ERANGE; |
| |
| chip->settings.als_gain_trim = ret; |
| |
| return ret; |
| } |
| |
| static void tsl2772_disable_regulators_action(void *_data) |
| { |
| struct tsl2772_chip *chip = _data; |
| |
| regulator_bulk_disable(ARRAY_SIZE(chip->supplies), chip->supplies); |
| } |
| |
| static int tsl2772_chip_on(struct iio_dev *indio_dev) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| int ret, i, als_count, als_time_us; |
| u8 *dev_reg, reg_val; |
| |
| /* Non calculated parameters */ |
| chip->tsl2772_config[TSL2772_ALS_TIME] = chip->settings.als_time; |
| chip->tsl2772_config[TSL2772_PRX_TIME] = chip->settings.prox_time; |
| chip->tsl2772_config[TSL2772_WAIT_TIME] = chip->settings.wait_time; |
| chip->tsl2772_config[TSL2772_ALS_PRX_CONFIG] = |
| chip->settings.als_prox_config; |
| |
| chip->tsl2772_config[TSL2772_ALS_MINTHRESHLO] = |
| (chip->settings.als_thresh_low) & 0xFF; |
| chip->tsl2772_config[TSL2772_ALS_MINTHRESHHI] = |
| (chip->settings.als_thresh_low >> 8) & 0xFF; |
| chip->tsl2772_config[TSL2772_ALS_MAXTHRESHLO] = |
| (chip->settings.als_thresh_high) & 0xFF; |
| chip->tsl2772_config[TSL2772_ALS_MAXTHRESHHI] = |
| (chip->settings.als_thresh_high >> 8) & 0xFF; |
| chip->tsl2772_config[TSL2772_PERSISTENCE] = |
| (chip->settings.prox_persistence & 0xFF) << 4 | |
| (chip->settings.als_persistence & 0xFF); |
| |
| chip->tsl2772_config[TSL2772_PRX_COUNT] = |
| chip->settings.prox_pulse_count; |
| chip->tsl2772_config[TSL2772_PRX_MINTHRESHLO] = |
| (chip->settings.prox_thres_low) & 0xFF; |
| chip->tsl2772_config[TSL2772_PRX_MINTHRESHHI] = |
| (chip->settings.prox_thres_low >> 8) & 0xFF; |
| chip->tsl2772_config[TSL2772_PRX_MAXTHRESHLO] = |
| (chip->settings.prox_thres_high) & 0xFF; |
| chip->tsl2772_config[TSL2772_PRX_MAXTHRESHHI] = |
| (chip->settings.prox_thres_high >> 8) & 0xFF; |
| |
| /* and make sure we're not already on */ |
| if (chip->tsl2772_chip_status == TSL2772_CHIP_WORKING) { |
| /* if forcing a register update - turn off, then on */ |
| dev_info(&chip->client->dev, "device is already enabled\n"); |
| return -EINVAL; |
| } |
| |
| /* Set the gain based on tsl2772_settings struct */ |
| chip->tsl2772_config[TSL2772_GAIN] = |
| (chip->settings.als_gain & 0xFF) | |
| ((chip->settings.prox_gain & 0xFF) << 2) | |
| (chip->settings.prox_diode << 4) | |
| (chip->settings.prox_power << 6); |
| |
| /* set chip time scaling and saturation */ |
| als_count = 256 - chip->settings.als_time; |
| als_time_us = als_count * tsl2772_int_time_avail[chip->id][3]; |
| chip->als_saturation = als_count * 768; /* 75% of full scale */ |
| chip->als_gain_time_scale = als_time_us * |
| tsl2772_als_gain[chip->settings.als_gain]; |
| |
| /* |
| * TSL2772 Specific power-on / adc enable sequence |
| * Power on the device 1st. |
| */ |
| ret = tsl2772_write_control_reg(chip, TSL2772_CNTL_PWR_ON); |
| if (ret < 0) |
| return ret; |
| |
| /* |
| * Use the following shadow copy for our delay before enabling ADC. |
| * Write all the registers. |
| */ |
| for (i = 0, dev_reg = chip->tsl2772_config; |
| i < TSL2772_MAX_CONFIG_REG; i++) { |
| int reg = TSL2772_CMD_REG + i; |
| |
| ret = i2c_smbus_write_byte_data(chip->client, reg, |
| *dev_reg++); |
| if (ret < 0) { |
| dev_err(&chip->client->dev, |
| "%s: failed to write to register %x: %d\n", |
| __func__, reg, ret); |
| return ret; |
| } |
| } |
| |
| /* Power-on settling time */ |
| usleep_range(3000, 3500); |
| |
| reg_val = TSL2772_CNTL_PWR_ON | TSL2772_CNTL_ADC_ENBL | |
| TSL2772_CNTL_PROX_DET_ENBL; |
| if (chip->settings.als_interrupt_en) |
| reg_val |= TSL2772_CNTL_ALS_INT_ENBL; |
| if (chip->settings.prox_interrupt_en) |
| reg_val |= TSL2772_CNTL_PROX_INT_ENBL; |
| |
| ret = tsl2772_write_control_reg(chip, reg_val); |
| if (ret < 0) |
| return ret; |
| |
| ret = i2c_smbus_write_byte(chip->client, |
| TSL2772_CMD_REG | TSL2772_CMD_SPL_FN | |
| TSL2772_CMD_PROXALS_INT_CLR); |
| if (ret < 0) { |
| dev_err(&chip->client->dev, |
| "%s: failed to clear interrupt status: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| chip->tsl2772_chip_status = TSL2772_CHIP_WORKING; |
| |
| return ret; |
| } |
| |
| static int tsl2772_chip_off(struct iio_dev *indio_dev) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| |
| /* turn device off */ |
| chip->tsl2772_chip_status = TSL2772_CHIP_SUSPENDED; |
| return tsl2772_write_control_reg(chip, 0x00); |
| } |
| |
| static void tsl2772_chip_off_action(void *data) |
| { |
| struct iio_dev *indio_dev = data; |
| |
| tsl2772_chip_off(indio_dev); |
| } |
| |
| /** |
| * tsl2772_invoke_change - power cycle the device to implement the user |
| * parameters |
| * @indio_dev: pointer to IIO device |
| * |
| * Obtain and lock both ALS and PROX resources, determine and save device state |
| * (On/Off), cycle device to implement updated parameter, put device back into |
| * proper state, and unlock resource. |
| */ |
| static int tsl2772_invoke_change(struct iio_dev *indio_dev) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| int device_status = chip->tsl2772_chip_status; |
| int ret; |
| |
| mutex_lock(&chip->als_mutex); |
| mutex_lock(&chip->prox_mutex); |
| |
| if (device_status == TSL2772_CHIP_WORKING) { |
| ret = tsl2772_chip_off(indio_dev); |
| if (ret < 0) |
| goto unlock; |
| } |
| |
| ret = tsl2772_chip_on(indio_dev); |
| |
| unlock: |
| mutex_unlock(&chip->prox_mutex); |
| mutex_unlock(&chip->als_mutex); |
| |
| return ret; |
| } |
| |
| static int tsl2772_prox_cal(struct iio_dev *indio_dev) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| int prox_history[MAX_SAMPLES_CAL + 1]; |
| int i, ret, mean, max, sample_sum; |
| |
| if (chip->settings.prox_max_samples_cal < 1 || |
| chip->settings.prox_max_samples_cal > MAX_SAMPLES_CAL) |
| return -EINVAL; |
| |
| for (i = 0; i < chip->settings.prox_max_samples_cal; i++) { |
| usleep_range(15000, 17500); |
| ret = tsl2772_get_prox(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| prox_history[i] = chip->prox_data; |
| } |
| |
| sample_sum = 0; |
| max = INT_MIN; |
| for (i = 0; i < chip->settings.prox_max_samples_cal; i++) { |
| sample_sum += prox_history[i]; |
| max = max(max, prox_history[i]); |
| } |
| mean = sample_sum / chip->settings.prox_max_samples_cal; |
| |
| chip->settings.prox_thres_high = (max << 1) - mean; |
| |
| return tsl2772_invoke_change(indio_dev); |
| } |
| |
| static int tsl2772_read_avail(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, |
| long mask) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_CALIBSCALE: |
| if (chan->type == IIO_INTENSITY) { |
| *length = ARRAY_SIZE(tsl2772_int_calibscale_avail); |
| *vals = tsl2772_int_calibscale_avail; |
| } else { |
| *length = ARRAY_SIZE(tsl2772_prox_calibscale_avail); |
| *vals = tsl2772_prox_calibscale_avail; |
| } |
| *type = IIO_VAL_INT; |
| return IIO_AVAIL_LIST; |
| case IIO_CHAN_INFO_INT_TIME: |
| *length = ARRAY_SIZE(tsl2772_int_time_avail[chip->id]); |
| *vals = tsl2772_int_time_avail[chip->id]; |
| *type = IIO_VAL_INT_PLUS_MICRO; |
| return IIO_AVAIL_RANGE; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static ssize_t in_illuminance0_target_input_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct tsl2772_chip *chip = iio_priv(dev_to_iio_dev(dev)); |
| |
| return scnprintf(buf, PAGE_SIZE, "%d\n", chip->settings.als_cal_target); |
| } |
| |
| static ssize_t in_illuminance0_target_input_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| u16 value; |
| int ret; |
| |
| if (kstrtou16(buf, 0, &value)) |
| return -EINVAL; |
| |
| chip->settings.als_cal_target = value; |
| ret = tsl2772_invoke_change(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| return len; |
| } |
| |
| static ssize_t in_illuminance0_calibrate_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| bool value; |
| int ret; |
| |
| if (kstrtobool(buf, &value) || !value) |
| return -EINVAL; |
| |
| ret = tsl2772_als_calibrate(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = tsl2772_invoke_change(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| return len; |
| } |
| |
| static ssize_t in_illuminance0_lux_table_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct tsl2772_chip *chip = iio_priv(dev_to_iio_dev(dev)); |
| int i = 0; |
| int offset = 0; |
| |
| while (i < TSL2772_MAX_LUX_TABLE_SIZE) { |
| offset += scnprintf(buf + offset, PAGE_SIZE - offset, "%u,%u,", |
| chip->tsl2772_device_lux[i].ch0, |
| chip->tsl2772_device_lux[i].ch1); |
| if (chip->tsl2772_device_lux[i].ch0 == 0) { |
| /* |
| * We just printed the first "0" entry. |
| * Now get rid of the extra "," and break. |
| */ |
| offset--; |
| break; |
| } |
| i++; |
| } |
| |
| offset += scnprintf(buf + offset, PAGE_SIZE - offset, "\n"); |
| return offset; |
| } |
| |
| static ssize_t in_illuminance0_lux_table_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| int value[ARRAY_SIZE(chip->tsl2772_device_lux) * 2 + 1]; |
| int n, ret; |
| |
| get_options(buf, ARRAY_SIZE(value), value); |
| |
| /* |
| * We now have an array of ints starting at value[1], and |
| * enumerated by value[0]. |
| * We expect each group of two ints to be one table entry, |
| * and the last table entry is all 0. |
| */ |
| n = value[0]; |
| if ((n % 2) || n < 4 || |
| n > ((ARRAY_SIZE(chip->tsl2772_device_lux) - 1) * 2)) |
| return -EINVAL; |
| |
| if ((value[(n - 1)] | value[n]) != 0) |
| return -EINVAL; |
| |
| if (chip->tsl2772_chip_status == TSL2772_CHIP_WORKING) { |
| ret = tsl2772_chip_off(indio_dev); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* Zero out the table */ |
| memset(chip->tsl2772_device_lux, 0, sizeof(chip->tsl2772_device_lux)); |
| memcpy(chip->tsl2772_device_lux, &value[1], (value[0] * 4)); |
| |
| ret = tsl2772_invoke_change(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| return len; |
| } |
| |
| static ssize_t in_proximity0_calibrate_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct iio_dev *indio_dev = dev_to_iio_dev(dev); |
| bool value; |
| int ret; |
| |
| if (kstrtobool(buf, &value) || !value) |
| return -EINVAL; |
| |
| ret = tsl2772_prox_cal(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = tsl2772_invoke_change(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| return len; |
| } |
| |
| static int tsl2772_read_interrupt_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| |
| if (chan->type == IIO_INTENSITY) |
| return chip->settings.als_interrupt_en; |
| else |
| return chip->settings.prox_interrupt_en; |
| } |
| |
| static int tsl2772_write_interrupt_config(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| int val) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| |
| if (chan->type == IIO_INTENSITY) |
| chip->settings.als_interrupt_en = val ? true : false; |
| else |
| chip->settings.prox_interrupt_en = val ? true : false; |
| |
| return tsl2772_invoke_change(indio_dev); |
| } |
| |
| static int tsl2772_write_event_value(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int val, int val2) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| int ret = -EINVAL, count, persistence; |
| u8 time; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| if (chan->type == IIO_INTENSITY) { |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| chip->settings.als_thresh_high = val; |
| ret = 0; |
| break; |
| case IIO_EV_DIR_FALLING: |
| chip->settings.als_thresh_low = val; |
| ret = 0; |
| break; |
| default: |
| break; |
| } |
| } else { |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| chip->settings.prox_thres_high = val; |
| ret = 0; |
| break; |
| case IIO_EV_DIR_FALLING: |
| chip->settings.prox_thres_low = val; |
| ret = 0; |
| break; |
| default: |
| break; |
| } |
| } |
| break; |
| case IIO_EV_INFO_PERIOD: |
| if (chan->type == IIO_INTENSITY) |
| time = chip->settings.als_time; |
| else |
| time = chip->settings.prox_time; |
| |
| count = 256 - time; |
| persistence = ((val * 1000000) + val2) / |
| (count * tsl2772_int_time_avail[chip->id][3]); |
| |
| if (chan->type == IIO_INTENSITY) { |
| /* ALS filter values are 1, 2, 3, 5, 10, 15, ..., 60 */ |
| if (persistence > 3) |
| persistence = (persistence / 5) + 3; |
| |
| chip->settings.als_persistence = persistence; |
| } else { |
| chip->settings.prox_persistence = persistence; |
| } |
| |
| ret = 0; |
| break; |
| default: |
| break; |
| } |
| |
| if (ret < 0) |
| return ret; |
| |
| return tsl2772_invoke_change(indio_dev); |
| } |
| |
| static int tsl2772_read_event_value(struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan, |
| enum iio_event_type type, |
| enum iio_event_direction dir, |
| enum iio_event_info info, |
| int *val, int *val2) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| int filter_delay, persistence; |
| u8 time; |
| |
| switch (info) { |
| case IIO_EV_INFO_VALUE: |
| if (chan->type == IIO_INTENSITY) { |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| *val = chip->settings.als_thresh_high; |
| return IIO_VAL_INT; |
| case IIO_EV_DIR_FALLING: |
| *val = chip->settings.als_thresh_low; |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| } else { |
| switch (dir) { |
| case IIO_EV_DIR_RISING: |
| *val = chip->settings.prox_thres_high; |
| return IIO_VAL_INT; |
| case IIO_EV_DIR_FALLING: |
| *val = chip->settings.prox_thres_low; |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| } |
| break; |
| case IIO_EV_INFO_PERIOD: |
| if (chan->type == IIO_INTENSITY) { |
| time = chip->settings.als_time; |
| persistence = chip->settings.als_persistence; |
| |
| /* ALS filter values are 1, 2, 3, 5, 10, 15, ..., 60 */ |
| if (persistence > 3) |
| persistence = (persistence - 3) * 5; |
| } else { |
| time = chip->settings.prox_time; |
| persistence = chip->settings.prox_persistence; |
| } |
| |
| filter_delay = persistence * (256 - time) * |
| tsl2772_int_time_avail[chip->id][3]; |
| |
| *val = filter_delay / 1000000; |
| *val2 = filter_delay % 1000000; |
| return IIO_VAL_INT_PLUS_MICRO; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int tsl2772_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, |
| int *val2, |
| long mask) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_PROCESSED: |
| switch (chan->type) { |
| case IIO_LIGHT: |
| tsl2772_get_lux(indio_dev); |
| *val = chip->als_cur_info.lux; |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| case IIO_CHAN_INFO_RAW: |
| switch (chan->type) { |
| case IIO_INTENSITY: |
| tsl2772_get_lux(indio_dev); |
| if (chan->channel == 0) |
| *val = chip->als_cur_info.als_ch0; |
| else |
| *val = chip->als_cur_info.als_ch1; |
| return IIO_VAL_INT; |
| case IIO_PROXIMITY: |
| tsl2772_get_prox(indio_dev); |
| *val = chip->prox_data; |
| return IIO_VAL_INT; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case IIO_CHAN_INFO_CALIBSCALE: |
| if (chan->type == IIO_LIGHT) |
| *val = tsl2772_als_gain[chip->settings.als_gain]; |
| else |
| *val = tsl2772_prox_gain[chip->settings.prox_gain]; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_CALIBBIAS: |
| *val = chip->settings.als_gain_trim; |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_INT_TIME: |
| *val = 0; |
| *val2 = (256 - chip->settings.als_time) * |
| tsl2772_int_time_avail[chip->id][3]; |
| return IIO_VAL_INT_PLUS_MICRO; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int tsl2772_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, |
| int val2, |
| long mask) |
| { |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_CALIBSCALE: |
| if (chan->type == IIO_INTENSITY) { |
| switch (val) { |
| case 1: |
| chip->settings.als_gain = 0; |
| break; |
| case 8: |
| chip->settings.als_gain = 1; |
| break; |
| case 16: |
| chip->settings.als_gain = 2; |
| break; |
| case 120: |
| chip->settings.als_gain = 3; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } else { |
| switch (val) { |
| case 1: |
| chip->settings.prox_gain = 0; |
| break; |
| case 2: |
| chip->settings.prox_gain = 1; |
| break; |
| case 4: |
| chip->settings.prox_gain = 2; |
| break; |
| case 8: |
| chip->settings.prox_gain = 3; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| break; |
| case IIO_CHAN_INFO_CALIBBIAS: |
| if (val < TSL2772_ALS_GAIN_TRIM_MIN || |
| val > TSL2772_ALS_GAIN_TRIM_MAX) |
| return -EINVAL; |
| |
| chip->settings.als_gain_trim = val; |
| break; |
| case IIO_CHAN_INFO_INT_TIME: |
| if (val != 0 || val2 < tsl2772_int_time_avail[chip->id][1] || |
| val2 > tsl2772_int_time_avail[chip->id][5]) |
| return -EINVAL; |
| |
| chip->settings.als_time = 256 - |
| (val2 / tsl2772_int_time_avail[chip->id][3]); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return tsl2772_invoke_change(indio_dev); |
| } |
| |
| static DEVICE_ATTR_RW(in_illuminance0_target_input); |
| |
| static DEVICE_ATTR_WO(in_illuminance0_calibrate); |
| |
| static DEVICE_ATTR_WO(in_proximity0_calibrate); |
| |
| static DEVICE_ATTR_RW(in_illuminance0_lux_table); |
| |
| /* Use the default register values to identify the Taos device */ |
| static int tsl2772_device_id_verif(int id, int target) |
| { |
| switch (target) { |
| case tsl2571: |
| case tsl2671: |
| case tsl2771: |
| return (id & 0xf0) == TRITON_ID; |
| case tmd2671: |
| case tmd2771: |
| return (id & 0xf0) == HALIBUT_ID; |
| case tsl2572: |
| case tsl2672: |
| case tmd2672: |
| case tsl2772: |
| case tmd2772: |
| case apds9930: |
| return (id & 0xf0) == SWORDFISH_ID; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static irqreturn_t tsl2772_event_handler(int irq, void *private) |
| { |
| struct iio_dev *indio_dev = private; |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| s64 timestamp = iio_get_time_ns(indio_dev); |
| int ret; |
| |
| ret = tsl2772_read_status(chip); |
| if (ret < 0) |
| return IRQ_HANDLED; |
| |
| /* What type of interrupt do we need to process */ |
| if (ret & TSL2772_STA_PRX_INTR) { |
| iio_push_event(indio_dev, |
| IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, |
| 0, |
| IIO_EV_TYPE_THRESH, |
| IIO_EV_DIR_EITHER), |
| timestamp); |
| } |
| |
| if (ret & TSL2772_STA_ALS_INTR) { |
| iio_push_event(indio_dev, |
| IIO_UNMOD_EVENT_CODE(IIO_LIGHT, |
| 0, |
| IIO_EV_TYPE_THRESH, |
| IIO_EV_DIR_EITHER), |
| timestamp); |
| } |
| |
| ret = i2c_smbus_write_byte(chip->client, |
| TSL2772_CMD_REG | TSL2772_CMD_SPL_FN | |
| TSL2772_CMD_PROXALS_INT_CLR); |
| if (ret < 0) |
| dev_err(&chip->client->dev, |
| "%s: failed to clear interrupt status: %d\n", |
| __func__, ret); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct attribute *tsl2772_ALS_device_attrs[] = { |
| &dev_attr_in_illuminance0_target_input.attr, |
| &dev_attr_in_illuminance0_calibrate.attr, |
| &dev_attr_in_illuminance0_lux_table.attr, |
| NULL |
| }; |
| |
| static struct attribute *tsl2772_PRX_device_attrs[] = { |
| &dev_attr_in_proximity0_calibrate.attr, |
| NULL |
| }; |
| |
| static struct attribute *tsl2772_ALSPRX_device_attrs[] = { |
| &dev_attr_in_illuminance0_target_input.attr, |
| &dev_attr_in_illuminance0_calibrate.attr, |
| &dev_attr_in_illuminance0_lux_table.attr, |
| NULL |
| }; |
| |
| static struct attribute *tsl2772_PRX2_device_attrs[] = { |
| &dev_attr_in_proximity0_calibrate.attr, |
| NULL |
| }; |
| |
| static struct attribute *tsl2772_ALSPRX2_device_attrs[] = { |
| &dev_attr_in_illuminance0_target_input.attr, |
| &dev_attr_in_illuminance0_calibrate.attr, |
| &dev_attr_in_illuminance0_lux_table.attr, |
| &dev_attr_in_proximity0_calibrate.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group tsl2772_device_attr_group_tbl[] = { |
| [ALS] = { |
| .attrs = tsl2772_ALS_device_attrs, |
| }, |
| [PRX] = { |
| .attrs = tsl2772_PRX_device_attrs, |
| }, |
| [ALSPRX] = { |
| .attrs = tsl2772_ALSPRX_device_attrs, |
| }, |
| [PRX2] = { |
| .attrs = tsl2772_PRX2_device_attrs, |
| }, |
| [ALSPRX2] = { |
| .attrs = tsl2772_ALSPRX2_device_attrs, |
| }, |
| }; |
| |
| #define TSL2772_DEVICE_INFO(type)[type] = \ |
| { \ |
| .attrs = &tsl2772_device_attr_group_tbl[type], \ |
| .read_raw = &tsl2772_read_raw, \ |
| .read_avail = &tsl2772_read_avail, \ |
| .write_raw = &tsl2772_write_raw, \ |
| .read_event_value = &tsl2772_read_event_value, \ |
| .write_event_value = &tsl2772_write_event_value, \ |
| .read_event_config = &tsl2772_read_interrupt_config, \ |
| .write_event_config = &tsl2772_write_interrupt_config, \ |
| } |
| |
| static const struct iio_info tsl2772_device_info[] = { |
| TSL2772_DEVICE_INFO(ALS), |
| TSL2772_DEVICE_INFO(PRX), |
| TSL2772_DEVICE_INFO(ALSPRX), |
| TSL2772_DEVICE_INFO(PRX2), |
| TSL2772_DEVICE_INFO(ALSPRX2), |
| }; |
| |
| static const struct iio_event_spec tsl2772_events[] = { |
| { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_RISING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), |
| }, { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_FALLING, |
| .mask_separate = BIT(IIO_EV_INFO_VALUE), |
| }, { |
| .type = IIO_EV_TYPE_THRESH, |
| .dir = IIO_EV_DIR_EITHER, |
| .mask_separate = BIT(IIO_EV_INFO_PERIOD) | |
| BIT(IIO_EV_INFO_ENABLE), |
| }, |
| }; |
| |
| static const struct tsl2772_chip_info tsl2772_chip_info_tbl[] = { |
| [ALS] = { |
| .channel_with_events = { |
| { |
| .type = IIO_LIGHT, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE) | |
| BIT(IIO_CHAN_INFO_CALIBBIAS), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| .event_spec = tsl2772_events, |
| .num_event_specs = ARRAY_SIZE(tsl2772_events), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 1, |
| }, |
| }, |
| .channel_without_events = { |
| { |
| .type = IIO_LIGHT, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE) | |
| BIT(IIO_CHAN_INFO_CALIBBIAS), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 1, |
| }, |
| }, |
| .chan_table_elements = 3, |
| .info = &tsl2772_device_info[ALS], |
| }, |
| [PRX] = { |
| .channel_with_events = { |
| { |
| .type = IIO_PROXIMITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| .event_spec = tsl2772_events, |
| .num_event_specs = ARRAY_SIZE(tsl2772_events), |
| }, |
| }, |
| .channel_without_events = { |
| { |
| .type = IIO_PROXIMITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| }, |
| }, |
| .chan_table_elements = 1, |
| .info = &tsl2772_device_info[PRX], |
| }, |
| [ALSPRX] = { |
| .channel_with_events = { |
| { |
| .type = IIO_LIGHT, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE) | |
| BIT(IIO_CHAN_INFO_CALIBBIAS), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| .event_spec = tsl2772_events, |
| .num_event_specs = ARRAY_SIZE(tsl2772_events), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 1, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| }, { |
| .type = IIO_PROXIMITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| .event_spec = tsl2772_events, |
| .num_event_specs = ARRAY_SIZE(tsl2772_events), |
| }, |
| }, |
| .channel_without_events = { |
| { |
| .type = IIO_LIGHT, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE) | |
| BIT(IIO_CHAN_INFO_CALIBBIAS), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 1, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| }, { |
| .type = IIO_PROXIMITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| }, |
| }, |
| .chan_table_elements = 4, |
| .info = &tsl2772_device_info[ALSPRX], |
| }, |
| [PRX2] = { |
| .channel_with_events = { |
| { |
| .type = IIO_PROXIMITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| .event_spec = tsl2772_events, |
| .num_event_specs = ARRAY_SIZE(tsl2772_events), |
| }, |
| }, |
| .channel_without_events = { |
| { |
| .type = IIO_PROXIMITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| }, |
| }, |
| .chan_table_elements = 1, |
| .info = &tsl2772_device_info[PRX2], |
| }, |
| [ALSPRX2] = { |
| .channel_with_events = { |
| { |
| .type = IIO_LIGHT, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE) | |
| BIT(IIO_CHAN_INFO_CALIBBIAS), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| .event_spec = tsl2772_events, |
| .num_event_specs = ARRAY_SIZE(tsl2772_events), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 1, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| }, { |
| .type = IIO_PROXIMITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| .event_spec = tsl2772_events, |
| .num_event_specs = ARRAY_SIZE(tsl2772_events), |
| }, |
| }, |
| .channel_without_events = { |
| { |
| .type = IIO_LIGHT, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE) | |
| BIT(IIO_CHAN_INFO_CALIBBIAS), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_INT_TIME) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| }, { |
| .type = IIO_INTENSITY, |
| .indexed = 1, |
| .channel = 1, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| }, { |
| .type = IIO_PROXIMITY, |
| .indexed = 1, |
| .channel = 0, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| .info_mask_separate_available = |
| BIT(IIO_CHAN_INFO_CALIBSCALE), |
| }, |
| }, |
| .chan_table_elements = 4, |
| .info = &tsl2772_device_info[ALSPRX2], |
| }, |
| }; |
| |
| static int tsl2772_probe(struct i2c_client *clientp, |
| const struct i2c_device_id *id) |
| { |
| struct iio_dev *indio_dev; |
| struct tsl2772_chip *chip; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(&clientp->dev, sizeof(*chip)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| chip = iio_priv(indio_dev); |
| chip->client = clientp; |
| i2c_set_clientdata(clientp, indio_dev); |
| |
| chip->supplies[TSL2772_SUPPLY_VDD].supply = "vdd"; |
| chip->supplies[TSL2772_SUPPLY_VDDIO].supply = "vddio"; |
| |
| ret = devm_regulator_bulk_get(&clientp->dev, |
| ARRAY_SIZE(chip->supplies), |
| chip->supplies); |
| if (ret < 0) |
| return dev_err_probe(&clientp->dev, ret, "Failed to get regulators\n"); |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(chip->supplies), chip->supplies); |
| if (ret < 0) { |
| dev_err(&clientp->dev, "Failed to enable regulators: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = devm_add_action_or_reset(&clientp->dev, |
| tsl2772_disable_regulators_action, |
| chip); |
| if (ret < 0) { |
| dev_err(&clientp->dev, "Failed to setup regulator cleanup action %d\n", |
| ret); |
| return ret; |
| } |
| |
| usleep_range(TSL2772_BOOT_MIN_SLEEP_TIME, TSL2772_BOOT_MAX_SLEEP_TIME); |
| |
| ret = i2c_smbus_read_byte_data(chip->client, |
| TSL2772_CMD_REG | TSL2772_CHIPID); |
| if (ret < 0) |
| return ret; |
| |
| if (tsl2772_device_id_verif(ret, id->driver_data) <= 0) { |
| dev_info(&chip->client->dev, |
| "%s: i2c device found does not match expected id\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| ret = i2c_smbus_write_byte(clientp, TSL2772_CMD_REG | TSL2772_CNTRL); |
| if (ret < 0) { |
| dev_err(&clientp->dev, |
| "%s: Failed to write to CMD register: %d\n", |
| __func__, ret); |
| return ret; |
| } |
| |
| mutex_init(&chip->als_mutex); |
| mutex_init(&chip->prox_mutex); |
| |
| chip->tsl2772_chip_status = TSL2772_CHIP_UNKNOWN; |
| chip->pdata = dev_get_platdata(&clientp->dev); |
| chip->id = id->driver_data; |
| chip->chip_info = |
| &tsl2772_chip_info_tbl[device_channel_config[id->driver_data]]; |
| |
| indio_dev->info = chip->chip_info->info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->name = chip->client->name; |
| indio_dev->num_channels = chip->chip_info->chan_table_elements; |
| |
| if (clientp->irq) { |
| indio_dev->channels = chip->chip_info->channel_with_events; |
| |
| ret = devm_request_threaded_irq(&clientp->dev, clientp->irq, |
| NULL, |
| &tsl2772_event_handler, |
| IRQF_TRIGGER_FALLING | |
| IRQF_ONESHOT, |
| "TSL2772_event", |
| indio_dev); |
| if (ret) { |
| dev_err(&clientp->dev, |
| "%s: irq request failed\n", __func__); |
| return ret; |
| } |
| } else { |
| indio_dev->channels = chip->chip_info->channel_without_events; |
| } |
| |
| tsl2772_defaults(chip); |
| ret = tsl2772_chip_on(indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = devm_add_action_or_reset(&clientp->dev, |
| tsl2772_chip_off_action, |
| indio_dev); |
| if (ret < 0) |
| return ret; |
| |
| return devm_iio_device_register(&clientp->dev, indio_dev); |
| } |
| |
| static int tsl2772_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| int ret; |
| |
| ret = tsl2772_chip_off(indio_dev); |
| regulator_bulk_disable(ARRAY_SIZE(chip->supplies), chip->supplies); |
| |
| return ret; |
| } |
| |
| static int tsl2772_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| struct tsl2772_chip *chip = iio_priv(indio_dev); |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(chip->supplies), chip->supplies); |
| if (ret < 0) |
| return ret; |
| |
| usleep_range(TSL2772_BOOT_MIN_SLEEP_TIME, TSL2772_BOOT_MAX_SLEEP_TIME); |
| |
| return tsl2772_chip_on(indio_dev); |
| } |
| |
| static const struct i2c_device_id tsl2772_idtable[] = { |
| { "tsl2571", tsl2571 }, |
| { "tsl2671", tsl2671 }, |
| { "tmd2671", tmd2671 }, |
| { "tsl2771", tsl2771 }, |
| { "tmd2771", tmd2771 }, |
| { "tsl2572", tsl2572 }, |
| { "tsl2672", tsl2672 }, |
| { "tmd2672", tmd2672 }, |
| { "tsl2772", tsl2772 }, |
| { "tmd2772", tmd2772 }, |
| { "apds9930", apds9930}, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(i2c, tsl2772_idtable); |
| |
| static const struct of_device_id tsl2772_of_match[] = { |
| { .compatible = "amstaos,tsl2571" }, |
| { .compatible = "amstaos,tsl2671" }, |
| { .compatible = "amstaos,tmd2671" }, |
| { .compatible = "amstaos,tsl2771" }, |
| { .compatible = "amstaos,tmd2771" }, |
| { .compatible = "amstaos,tsl2572" }, |
| { .compatible = "amstaos,tsl2672" }, |
| { .compatible = "amstaos,tmd2672" }, |
| { .compatible = "amstaos,tsl2772" }, |
| { .compatible = "amstaos,tmd2772" }, |
| { .compatible = "avago,apds9930" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, tsl2772_of_match); |
| |
| static const struct dev_pm_ops tsl2772_pm_ops = { |
| .suspend = tsl2772_suspend, |
| .resume = tsl2772_resume, |
| }; |
| |
| static struct i2c_driver tsl2772_driver = { |
| .driver = { |
| .name = "tsl2772", |
| .of_match_table = tsl2772_of_match, |
| .pm = &tsl2772_pm_ops, |
| }, |
| .id_table = tsl2772_idtable, |
| .probe = tsl2772_probe, |
| }; |
| |
| module_i2c_driver(tsl2772_driver); |
| |
| MODULE_AUTHOR("J. August Brenner <Jon.Brenner@ams.com>"); |
| MODULE_AUTHOR("Brian Masney <masneyb@onstation.org>"); |
| MODULE_DESCRIPTION("TAOS tsl2772 ambient and proximity light sensor driver"); |
| MODULE_LICENSE("GPL"); |