| # |
| # PCCARD (PCMCIA/CardBus) bus subsystem configuration |
| # |
| |
| menuconfig PCCARD |
| tristate "PCCard (PCMCIA/CardBus) support" |
| depends on HOTPLUG |
| ---help--- |
| Say Y here if you want to attach PCMCIA- or PC-cards to your Linux |
| computer. These are credit-card size devices such as network cards, |
| modems or hard drives often used with laptops computers. There are |
| actually two varieties of these cards: 16 bit PCMCIA and 32 bit |
| CardBus cards. |
| |
| To compile this driver as modules, choose M here: the |
| module will be called pcmcia_core. |
| |
| if PCCARD |
| |
| config PCMCIA_DEBUG |
| bool "Enable PCCARD debugging" |
| help |
| Say Y here to enable PCMCIA subsystem debugging. You |
| will need to choose the debugging level either via the |
| kernel command line, or module options depending whether |
| you build the PCMCIA as modules. |
| |
| The kernel command line options are: |
| pcmcia_core.pc_debug=N |
| pcmcia.pc_debug=N |
| sa11xx_core.pc_debug=N |
| |
| The module option is called pc_debug=N |
| |
| In all the above examples, N is the debugging verbosity |
| level. |
| |
| config PCMCIA |
| tristate "16-bit PCMCIA support" |
| select CRC32 |
| default y |
| ---help--- |
| This option enables support for 16-bit PCMCIA cards. Most older |
| PC-cards are such 16-bit PCMCIA cards, so unless you know you're |
| only using 32-bit CardBus cards, say Y or M here. |
| |
| To use 16-bit PCMCIA cards, you will need supporting software in |
| most cases. (see the file <file:Documentation/Changes> for |
| location and details). |
| |
| To compile this driver as modules, choose M here: the |
| module will be called pcmcia. |
| |
| If unsure, say Y. |
| |
| config PCMCIA_LOAD_CIS |
| bool "Load CIS updates from userspace (EXPERIMENTAL)" |
| depends on PCMCIA && EXPERIMENTAL |
| select FW_LOADER |
| default y |
| help |
| Some PCMCIA cards require an updated Card Information Structure (CIS) |
| to be loaded from userspace to work correctly. If you say Y here, |
| and your userspace is arranged correctly, this will be loaded |
| automatically using the in-kernel firmware loader and the hotplug |
| subsystem, instead of relying on cardmgr from pcmcia-cs to do so. |
| |
| If unsure, say Y. |
| |
| config PCMCIA_IOCTL |
| bool "PCMCIA control ioctl (obsolete)" |
| depends on PCMCIA |
| default y |
| help |
| If you say Y here, the deprecated ioctl interface to the PCMCIA |
| subsystem will be built. It is needed by cardmgr and cardctl |
| (pcmcia-cs) to function properly. |
| |
| You should use the new pcmciautils package instead (see |
| <file:Documentation/Changes> for location and details). |
| |
| If unsure, say Y. |
| |
| config CARDBUS |
| bool "32-bit CardBus support" |
| depends on PCI |
| default y |
| ---help--- |
| CardBus is a bus mastering architecture for PC-cards, which allows |
| for 32 bit PC-cards (the original PCMCIA standard specifies only |
| a 16 bit wide bus). Many newer PC-cards are actually CardBus cards. |
| |
| To use 32 bit PC-cards, you also need a CardBus compatible host |
| bridge. Virtually all modern PCMCIA bridges do this, and most of |
| them are "yenta-compatible", so say Y or M there, too. |
| |
| If unsure, say Y. |
| |
| comment "PC-card bridges" |
| |
| config YENTA |
| tristate "CardBus yenta-compatible bridge support" |
| depends on PCI |
| select CARDBUS if !EMBEDDED |
| select PCCARD_NONSTATIC |
| ---help--- |
| This option enables support for CardBus host bridges. Virtually |
| all modern PCMCIA bridges are CardBus compatible. A "bridge" is |
| the hardware inside your computer that PCMCIA cards are plugged |
| into. |
| |
| To compile this driver as modules, choose M here: the |
| module will be called yenta_socket. |
| |
| If unsure, say Y. |
| |
| config YENTA_O2 |
| default y |
| bool "Special initialization for O2Micro bridges" if EMBEDDED |
| depends on YENTA |
| |
| config YENTA_RICOH |
| default y |
| bool "Special initialization for Ricoh bridges" if EMBEDDED |
| depends on YENTA |
| |
| config YENTA_TI |
| default y |
| bool "Special initialization for TI and EnE bridges" if EMBEDDED |
| depends on YENTA |
| |
| config YENTA_ENE_TUNE |
| default y |
| bool "Auto-tune EnE bridges for CB cards" if EMBEDDED |
| depends on YENTA_TI && CARDBUS |
| |
| config YENTA_TOSHIBA |
| default y |
| bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED |
| depends on YENTA |
| |
| config PD6729 |
| tristate "Cirrus PD6729 compatible bridge support" |
| depends on PCMCIA && PCI |
| select PCCARD_NONSTATIC |
| help |
| This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge |
| device, found in some older laptops and PCMCIA card readers. |
| |
| config I82092 |
| tristate "i82092 compatible bridge support" |
| depends on PCMCIA && PCI |
| select PCCARD_NONSTATIC |
| help |
| This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device, |
| found in some older laptops and more commonly in evaluation boards for the |
| chip. |
| |
| config I82365 |
| tristate "i82365 compatible bridge support" |
| depends on PCMCIA && ISA |
| select PCCARD_NONSTATIC |
| help |
| Say Y here to include support for ISA-bus PCMCIA host bridges that |
| are register compatible with the Intel i82365. These are found on |
| older laptops and ISA-bus card readers for desktop systems. A |
| "bridge" is the hardware inside your computer that PCMCIA cards are |
| plugged into. If unsure, say N. |
| |
| config TCIC |
| tristate "Databook TCIC host bridge support" |
| depends on PCMCIA && ISA |
| select PCCARD_NONSTATIC |
| help |
| Say Y here to include support for the Databook TCIC family of PCMCIA |
| host bridges. These are only found on a handful of old systems. |
| "Bridge" is the name used for the hardware inside your computer that |
| PCMCIA cards are plugged into. If unsure, say N. |
| |
| config PCMCIA_M8XX |
| tristate "MPC8xx PCMCIA support" |
| depends on PCMCIA && PPC && 8xx |
| select PCCARD_IODYN |
| select PCCARD_NONSTATIC |
| help |
| Say Y here to include support for PowerPC 8xx series PCMCIA |
| controller. |
| |
| This driver is also available as a module called m8xx_pcmcia. |
| |
| config HD64465_PCMCIA |
| tristate "HD64465 host bridge support" |
| depends on HD64465 && PCMCIA |
| |
| config PCMCIA_AU1X00 |
| tristate "Au1x00 pcmcia support" |
| depends on SOC_AU1X00 && PCMCIA |
| |
| config PCMCIA_SA1100 |
| tristate "SA1100 support" |
| depends on ARM && ARCH_SA1100 && PCMCIA |
| help |
| Say Y here to include support for SA11x0-based PCMCIA or CF |
| sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/ |
| Xscale(R) embedded machines. |
| |
| This driver is also available as a module called sa1100_cs. |
| |
| config PCMCIA_SA1111 |
| tristate "SA1111 support" |
| depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA |
| help |
| Say Y here to include support for SA1111-based PCMCIA or CF |
| sockets, found on the Jornada 720, Graphicsmaster and other |
| StrongARM(R)/Xscale(R) embedded machines. |
| |
| This driver is also available as a module called sa1111_cs. |
| |
| config PCMCIA_PXA2XX |
| tristate "PXA2xx support" |
| depends on ARM && ARCH_PXA && PCMCIA |
| help |
| Say Y here to include support for the PXA2xx PCMCIA controller |
| |
| config PCMCIA_PROBE |
| bool |
| default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC |
| |
| config M32R_PCC |
| bool "M32R PCMCIA I/F" |
| depends on M32R && CHIP_M32700 && PCMCIA |
| select PCCARD_NONSTATIC |
| help |
| Say Y here to use the M32R PCMCIA controller. |
| |
| config M32R_CFC |
| bool "M32R CF I/F Controller" |
| depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT) |
| select PCCARD_NONSTATIC |
| help |
| Say Y here to use the M32R CompactFlash controller. |
| |
| config M32R_CFC_NUM |
| int "M32R CF I/F number" |
| depends on M32R_CFC |
| default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT |
| help |
| Set the number of M32R CF slots. |
| |
| config PCMCIA_VRC4171 |
| tristate "NEC VRC4171 Card Controllers support" |
| depends on CPU_VR41XX && ISA && PCMCIA |
| |
| config PCMCIA_VRC4173 |
| tristate "NEC VRC4173 CARDU support" |
| depends on CPU_VR41XX && PCI && PCMCIA |
| |
| config OMAP_CF |
| tristate "OMAP CompactFlash Controller" |
| depends on PCMCIA && ARCH_OMAP16XX |
| help |
| Say Y here to support the CompactFlash controller on OMAP. |
| Note that this doesn't support "True IDE" mode. |
| |
| config AT91_CF |
| tristate "AT91 CompactFlash Controller" |
| depends on PCMCIA && ARCH_AT91RM9200 |
| help |
| Say Y here to support the CompactFlash controller on AT91 chips. |
| Or choose M to compile the driver as a module named "at91_cf". |
| |
| config PCCARD_NONSTATIC |
| tristate |
| |
| config PCCARD_IODYN |
| bool |
| |
| endif # PCCARD |
