| // SPDX-License-Identifier: GPL-2.0-only |
| #include <linux/virtio.h> |
| #include <linux/spinlock.h> |
| #include <linux/virtio_config.h> |
| #include <linux/module.h> |
| #include <linux/idr.h> |
| #include <linux/of.h> |
| #include <uapi/linux/virtio_ids.h> |
| |
| /* Unique numbering for virtio devices. */ |
| static DEFINE_IDA(virtio_index_ida); |
| |
| static ssize_t device_show(struct device *_d, |
| struct device_attribute *attr, char *buf) |
| { |
| struct virtio_device *dev = dev_to_virtio(_d); |
| return sprintf(buf, "0x%04x\n", dev->id.device); |
| } |
| static DEVICE_ATTR_RO(device); |
| |
| static ssize_t vendor_show(struct device *_d, |
| struct device_attribute *attr, char *buf) |
| { |
| struct virtio_device *dev = dev_to_virtio(_d); |
| return sprintf(buf, "0x%04x\n", dev->id.vendor); |
| } |
| static DEVICE_ATTR_RO(vendor); |
| |
| static ssize_t status_show(struct device *_d, |
| struct device_attribute *attr, char *buf) |
| { |
| struct virtio_device *dev = dev_to_virtio(_d); |
| return sprintf(buf, "0x%08x\n", dev->config->get_status(dev)); |
| } |
| static DEVICE_ATTR_RO(status); |
| |
| static ssize_t modalias_show(struct device *_d, |
| struct device_attribute *attr, char *buf) |
| { |
| struct virtio_device *dev = dev_to_virtio(_d); |
| return sprintf(buf, "virtio:d%08Xv%08X\n", |
| dev->id.device, dev->id.vendor); |
| } |
| static DEVICE_ATTR_RO(modalias); |
| |
| static ssize_t features_show(struct device *_d, |
| struct device_attribute *attr, char *buf) |
| { |
| struct virtio_device *dev = dev_to_virtio(_d); |
| unsigned int i; |
| ssize_t len = 0; |
| |
| /* We actually represent this as a bitstring, as it could be |
| * arbitrary length in future. */ |
| for (i = 0; i < sizeof(dev->features)*8; i++) |
| len += sprintf(buf+len, "%c", |
| __virtio_test_bit(dev, i) ? '1' : '0'); |
| len += sprintf(buf+len, "\n"); |
| return len; |
| } |
| static DEVICE_ATTR_RO(features); |
| |
| static struct attribute *virtio_dev_attrs[] = { |
| &dev_attr_device.attr, |
| &dev_attr_vendor.attr, |
| &dev_attr_status.attr, |
| &dev_attr_modalias.attr, |
| &dev_attr_features.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(virtio_dev); |
| |
| static inline int virtio_id_match(const struct virtio_device *dev, |
| const struct virtio_device_id *id) |
| { |
| if (id->device != dev->id.device && id->device != VIRTIO_DEV_ANY_ID) |
| return 0; |
| |
| return id->vendor == VIRTIO_DEV_ANY_ID || id->vendor == dev->id.vendor; |
| } |
| |
| /* This looks through all the IDs a driver claims to support. If any of them |
| * match, we return 1 and the kernel will call virtio_dev_probe(). */ |
| static int virtio_dev_match(struct device *_dv, struct device_driver *_dr) |
| { |
| unsigned int i; |
| struct virtio_device *dev = dev_to_virtio(_dv); |
| const struct virtio_device_id *ids; |
| |
| ids = drv_to_virtio(_dr)->id_table; |
| for (i = 0; ids[i].device; i++) |
| if (virtio_id_match(dev, &ids[i])) |
| return 1; |
| return 0; |
| } |
| |
| static int virtio_uevent(struct device *_dv, struct kobj_uevent_env *env) |
| { |
| struct virtio_device *dev = dev_to_virtio(_dv); |
| |
| return add_uevent_var(env, "MODALIAS=virtio:d%08Xv%08X", |
| dev->id.device, dev->id.vendor); |
| } |
| |
| void virtio_check_driver_offered_feature(const struct virtio_device *vdev, |
| unsigned int fbit) |
| { |
| unsigned int i; |
| struct virtio_driver *drv = drv_to_virtio(vdev->dev.driver); |
| |
| for (i = 0; i < drv->feature_table_size; i++) |
| if (drv->feature_table[i] == fbit) |
| return; |
| |
| if (drv->feature_table_legacy) { |
| for (i = 0; i < drv->feature_table_size_legacy; i++) |
| if (drv->feature_table_legacy[i] == fbit) |
| return; |
| } |
| |
| BUG(); |
| } |
| EXPORT_SYMBOL_GPL(virtio_check_driver_offered_feature); |
| |
| static void __virtio_config_changed(struct virtio_device *dev) |
| { |
| struct virtio_driver *drv = drv_to_virtio(dev->dev.driver); |
| |
| if (!dev->config_enabled) |
| dev->config_change_pending = true; |
| else if (drv && drv->config_changed) |
| drv->config_changed(dev); |
| } |
| |
| void virtio_config_changed(struct virtio_device *dev) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&dev->config_lock, flags); |
| __virtio_config_changed(dev); |
| spin_unlock_irqrestore(&dev->config_lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(virtio_config_changed); |
| |
| static void virtio_config_disable(struct virtio_device *dev) |
| { |
| spin_lock_irq(&dev->config_lock); |
| dev->config_enabled = false; |
| spin_unlock_irq(&dev->config_lock); |
| } |
| |
| static void virtio_config_enable(struct virtio_device *dev) |
| { |
| spin_lock_irq(&dev->config_lock); |
| dev->config_enabled = true; |
| if (dev->config_change_pending) |
| __virtio_config_changed(dev); |
| dev->config_change_pending = false; |
| spin_unlock_irq(&dev->config_lock); |
| } |
| |
| void virtio_add_status(struct virtio_device *dev, unsigned int status) |
| { |
| might_sleep(); |
| dev->config->set_status(dev, dev->config->get_status(dev) | status); |
| } |
| EXPORT_SYMBOL_GPL(virtio_add_status); |
| |
| int virtio_finalize_features(struct virtio_device *dev) |
| { |
| int ret = dev->config->finalize_features(dev); |
| unsigned status; |
| |
| might_sleep(); |
| if (ret) |
| return ret; |
| |
| ret = arch_has_restricted_virtio_memory_access(); |
| if (ret) { |
| if (!virtio_has_feature(dev, VIRTIO_F_VERSION_1)) { |
| dev_warn(&dev->dev, |
| "device must provide VIRTIO_F_VERSION_1\n"); |
| return -ENODEV; |
| } |
| |
| if (!virtio_has_feature(dev, VIRTIO_F_ACCESS_PLATFORM)) { |
| dev_warn(&dev->dev, |
| "device must provide VIRTIO_F_ACCESS_PLATFORM\n"); |
| return -ENODEV; |
| } |
| } |
| |
| if (!virtio_has_feature(dev, VIRTIO_F_VERSION_1)) |
| return 0; |
| |
| virtio_add_status(dev, VIRTIO_CONFIG_S_FEATURES_OK); |
| status = dev->config->get_status(dev); |
| if (!(status & VIRTIO_CONFIG_S_FEATURES_OK)) { |
| dev_err(&dev->dev, "virtio: device refuses features: %x\n", |
| status); |
| return -ENODEV; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(virtio_finalize_features); |
| |
| void virtio_reset_device(struct virtio_device *dev) |
| { |
| dev->config->reset(dev); |
| } |
| EXPORT_SYMBOL_GPL(virtio_reset_device); |
| |
| static int virtio_dev_probe(struct device *_d) |
| { |
| int err, i; |
| struct virtio_device *dev = dev_to_virtio(_d); |
| struct virtio_driver *drv = drv_to_virtio(dev->dev.driver); |
| u64 device_features; |
| u64 driver_features; |
| u64 driver_features_legacy; |
| |
| /* We have a driver! */ |
| virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER); |
| |
| /* Figure out what features the device supports. */ |
| device_features = dev->config->get_features(dev); |
| |
| /* Figure out what features the driver supports. */ |
| driver_features = 0; |
| for (i = 0; i < drv->feature_table_size; i++) { |
| unsigned int f = drv->feature_table[i]; |
| BUG_ON(f >= 64); |
| driver_features |= (1ULL << f); |
| } |
| |
| /* Some drivers have a separate feature table for virtio v1.0 */ |
| if (drv->feature_table_legacy) { |
| driver_features_legacy = 0; |
| for (i = 0; i < drv->feature_table_size_legacy; i++) { |
| unsigned int f = drv->feature_table_legacy[i]; |
| BUG_ON(f >= 64); |
| driver_features_legacy |= (1ULL << f); |
| } |
| } else { |
| driver_features_legacy = driver_features; |
| } |
| |
| /* |
| * Some devices detect legacy solely via F_VERSION_1. Write |
| * F_VERSION_1 to force LE config space accesses before FEATURES_OK for |
| * these when needed. |
| */ |
| if (drv->validate && !virtio_legacy_is_little_endian() |
| && device_features & BIT_ULL(VIRTIO_F_VERSION_1)) { |
| dev->features = BIT_ULL(VIRTIO_F_VERSION_1); |
| dev->config->finalize_features(dev); |
| } |
| |
| if (device_features & (1ULL << VIRTIO_F_VERSION_1)) |
| dev->features = driver_features & device_features; |
| else |
| dev->features = driver_features_legacy & device_features; |
| |
| /* Transport features always preserved to pass to finalize_features. */ |
| for (i = VIRTIO_TRANSPORT_F_START; i < VIRTIO_TRANSPORT_F_END; i++) |
| if (device_features & (1ULL << i)) |
| __virtio_set_bit(dev, i); |
| |
| if (drv->validate) { |
| err = drv->validate(dev); |
| if (err) |
| goto err; |
| } |
| |
| err = virtio_finalize_features(dev); |
| if (err) |
| goto err; |
| |
| err = drv->probe(dev); |
| if (err) |
| goto err; |
| |
| /* If probe didn't do it, mark device DRIVER_OK ourselves. */ |
| if (!(dev->config->get_status(dev) & VIRTIO_CONFIG_S_DRIVER_OK)) |
| virtio_device_ready(dev); |
| |
| if (drv->scan) |
| drv->scan(dev); |
| |
| virtio_config_enable(dev); |
| |
| return 0; |
| err: |
| virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED); |
| return err; |
| |
| } |
| |
| static void virtio_dev_remove(struct device *_d) |
| { |
| struct virtio_device *dev = dev_to_virtio(_d); |
| struct virtio_driver *drv = drv_to_virtio(dev->dev.driver); |
| |
| virtio_config_disable(dev); |
| |
| drv->remove(dev); |
| |
| /* Driver should have reset device. */ |
| WARN_ON_ONCE(dev->config->get_status(dev)); |
| |
| /* Acknowledge the device's existence again. */ |
| virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE); |
| |
| of_node_put(dev->dev.of_node); |
| } |
| |
| static struct bus_type virtio_bus = { |
| .name = "virtio", |
| .match = virtio_dev_match, |
| .dev_groups = virtio_dev_groups, |
| .uevent = virtio_uevent, |
| .probe = virtio_dev_probe, |
| .remove = virtio_dev_remove, |
| }; |
| |
| int register_virtio_driver(struct virtio_driver *driver) |
| { |
| /* Catch this early. */ |
| BUG_ON(driver->feature_table_size && !driver->feature_table); |
| driver->driver.bus = &virtio_bus; |
| return driver_register(&driver->driver); |
| } |
| EXPORT_SYMBOL_GPL(register_virtio_driver); |
| |
| void unregister_virtio_driver(struct virtio_driver *driver) |
| { |
| driver_unregister(&driver->driver); |
| } |
| EXPORT_SYMBOL_GPL(unregister_virtio_driver); |
| |
| static int virtio_device_of_init(struct virtio_device *dev) |
| { |
| struct device_node *np, *pnode = dev_of_node(dev->dev.parent); |
| char compat[] = "virtio,deviceXXXXXXXX"; |
| int ret, count; |
| |
| if (!pnode) |
| return 0; |
| |
| count = of_get_available_child_count(pnode); |
| if (!count) |
| return 0; |
| |
| /* There can be only 1 child node */ |
| if (WARN_ON(count > 1)) |
| return -EINVAL; |
| |
| np = of_get_next_available_child(pnode, NULL); |
| if (WARN_ON(!np)) |
| return -ENODEV; |
| |
| ret = snprintf(compat, sizeof(compat), "virtio,device%x", dev->id.device); |
| BUG_ON(ret >= sizeof(compat)); |
| |
| /* |
| * On powerpc/pseries virtio devices are PCI devices so PCI |
| * vendor/device ids play the role of the "compatible" property. |
| * Simply don't init of_node in this case. |
| */ |
| if (!of_device_is_compatible(np, compat)) { |
| ret = 0; |
| goto out; |
| } |
| |
| dev->dev.of_node = np; |
| return 0; |
| |
| out: |
| of_node_put(np); |
| return ret; |
| } |
| |
| /** |
| * register_virtio_device - register virtio device |
| * @dev : virtio device to be registered |
| * |
| * On error, the caller must call put_device on &@dev->dev (and not kfree), |
| * as another code path may have obtained a reference to @dev. |
| * |
| * Returns: 0 on suceess, -error on failure |
| */ |
| int register_virtio_device(struct virtio_device *dev) |
| { |
| int err; |
| |
| dev->dev.bus = &virtio_bus; |
| device_initialize(&dev->dev); |
| |
| /* Assign a unique device index and hence name. */ |
| err = ida_simple_get(&virtio_index_ida, 0, 0, GFP_KERNEL); |
| if (err < 0) |
| goto out; |
| |
| dev->index = err; |
| dev_set_name(&dev->dev, "virtio%u", dev->index); |
| |
| err = virtio_device_of_init(dev); |
| if (err) |
| goto out_ida_remove; |
| |
| spin_lock_init(&dev->config_lock); |
| dev->config_enabled = false; |
| dev->config_change_pending = false; |
| |
| /* We always start by resetting the device, in case a previous |
| * driver messed it up. This also tests that code path a little. */ |
| dev->config->reset(dev); |
| |
| /* Acknowledge that we've seen the device. */ |
| virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE); |
| |
| INIT_LIST_HEAD(&dev->vqs); |
| spin_lock_init(&dev->vqs_list_lock); |
| |
| /* |
| * device_add() causes the bus infrastructure to look for a matching |
| * driver. |
| */ |
| err = device_add(&dev->dev); |
| if (err) |
| goto out_of_node_put; |
| |
| return 0; |
| |
| out_of_node_put: |
| of_node_put(dev->dev.of_node); |
| out_ida_remove: |
| ida_simple_remove(&virtio_index_ida, dev->index); |
| out: |
| virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED); |
| return err; |
| } |
| EXPORT_SYMBOL_GPL(register_virtio_device); |
| |
| bool is_virtio_device(struct device *dev) |
| { |
| return dev->bus == &virtio_bus; |
| } |
| EXPORT_SYMBOL_GPL(is_virtio_device); |
| |
| void unregister_virtio_device(struct virtio_device *dev) |
| { |
| int index = dev->index; /* save for after device release */ |
| |
| device_unregister(&dev->dev); |
| ida_simple_remove(&virtio_index_ida, index); |
| } |
| EXPORT_SYMBOL_GPL(unregister_virtio_device); |
| |
| #ifdef CONFIG_PM_SLEEP |
| int virtio_device_freeze(struct virtio_device *dev) |
| { |
| struct virtio_driver *drv = drv_to_virtio(dev->dev.driver); |
| |
| virtio_config_disable(dev); |
| |
| dev->failed = dev->config->get_status(dev) & VIRTIO_CONFIG_S_FAILED; |
| |
| if (drv && drv->freeze) |
| return drv->freeze(dev); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(virtio_device_freeze); |
| |
| int virtio_device_restore(struct virtio_device *dev) |
| { |
| struct virtio_driver *drv = drv_to_virtio(dev->dev.driver); |
| int ret; |
| |
| /* We always start by resetting the device, in case a previous |
| * driver messed it up. */ |
| dev->config->reset(dev); |
| |
| /* Acknowledge that we've seen the device. */ |
| virtio_add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE); |
| |
| /* Maybe driver failed before freeze. |
| * Restore the failed status, for debugging. */ |
| if (dev->failed) |
| virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED); |
| |
| if (!drv) |
| return 0; |
| |
| /* We have a driver! */ |
| virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER); |
| |
| ret = virtio_finalize_features(dev); |
| if (ret) |
| goto err; |
| |
| if (drv->restore) { |
| ret = drv->restore(dev); |
| if (ret) |
| goto err; |
| } |
| |
| /* Finally, tell the device we're all set */ |
| virtio_add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); |
| |
| virtio_config_enable(dev); |
| |
| return 0; |
| |
| err: |
| virtio_add_status(dev, VIRTIO_CONFIG_S_FAILED); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(virtio_device_restore); |
| #endif |
| |
| static int virtio_init(void) |
| { |
| if (bus_register(&virtio_bus) != 0) |
| panic("virtio bus registration failed"); |
| return 0; |
| } |
| |
| static void __exit virtio_exit(void) |
| { |
| bus_unregister(&virtio_bus); |
| ida_destroy(&virtio_index_ida); |
| } |
| core_initcall(virtio_init); |
| module_exit(virtio_exit); |
| |
| MODULE_LICENSE("GPL"); |