| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // mp5416.c - regulator driver for mps mp5416 |
| // |
| // Copyright 2020 Monolithic Power Systems, Inc |
| // |
| // Author: Saravanan Sekar <sravanhome@gmail.com> |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| |
| #define MP5416_REG_CTL0 0x00 |
| #define MP5416_REG_CTL1 0x01 |
| #define MP5416_REG_CTL2 0x02 |
| #define MP5416_REG_ILIM 0x03 |
| #define MP5416_REG_BUCK1 0x04 |
| #define MP5416_REG_BUCK2 0x05 |
| #define MP5416_REG_BUCK3 0x06 |
| #define MP5416_REG_BUCK4 0x07 |
| #define MP5416_REG_LDO1 0x08 |
| #define MP5416_REG_LDO2 0x09 |
| #define MP5416_REG_LDO3 0x0a |
| #define MP5416_REG_LDO4 0x0b |
| |
| #define MP5416_REGULATOR_EN BIT(7) |
| #define MP5416_MASK_VSET 0x7f |
| #define MP5416_MASK_BUCK1_ILIM 0xc0 |
| #define MP5416_MASK_BUCK2_ILIM 0x0c |
| #define MP5416_MASK_BUCK3_ILIM 0x30 |
| #define MP5416_MASK_BUCK4_ILIM 0x03 |
| #define MP5416_MASK_DVS_SLEWRATE 0xc0 |
| |
| /* values in uV */ |
| #define MP5416_VOLT1_MIN 600000 |
| #define MP5416_VOLT1_MAX 2187500 |
| #define MP5416_VOLT1_STEP 12500 |
| #define MP5416_VOLT2_MIN 800000 |
| #define MP5416_VOLT2_MAX 3975000 |
| #define MP5416_VOLT2_STEP 25000 |
| |
| #define MP5416_VOLT1_RANGE \ |
| ((MP5416_VOLT1_MAX - MP5416_VOLT1_MIN)/MP5416_VOLT1_STEP + 1) |
| #define MP5416_VOLT2_RANGE \ |
| ((MP5416_VOLT2_MAX - MP5416_VOLT2_MIN)/MP5416_VOLT2_STEP + 1) |
| |
| #define MP5416BUCK(_name, _id, _ilim, _dreg, _dval, _vsel) \ |
| [MP5416_BUCK ## _id] = { \ |
| .id = MP5416_BUCK ## _id, \ |
| .name = _name, \ |
| .of_match = _name, \ |
| .regulators_node = "regulators", \ |
| .ops = &mp5416_buck_ops, \ |
| .min_uV = MP5416_VOLT ##_vsel## _MIN, \ |
| .uV_step = MP5416_VOLT ##_vsel## _STEP, \ |
| .n_voltages = MP5416_VOLT ##_vsel## _RANGE, \ |
| .curr_table = _ilim, \ |
| .n_current_limits = ARRAY_SIZE(_ilim), \ |
| .csel_reg = MP5416_REG_ILIM, \ |
| .csel_mask = MP5416_MASK_BUCK ## _id ##_ILIM, \ |
| .vsel_reg = MP5416_REG_BUCK ## _id, \ |
| .vsel_mask = MP5416_MASK_VSET, \ |
| .enable_reg = MP5416_REG_BUCK ## _id, \ |
| .enable_mask = MP5416_REGULATOR_EN, \ |
| .ramp_reg = MP5416_REG_CTL2, \ |
| .ramp_mask = MP5416_MASK_DVS_SLEWRATE, \ |
| .ramp_delay_table = mp5416_buck_ramp_table, \ |
| .n_ramp_values = ARRAY_SIZE(mp5416_buck_ramp_table), \ |
| .active_discharge_on = _dval, \ |
| .active_discharge_reg = _dreg, \ |
| .active_discharge_mask = _dval, \ |
| .owner = THIS_MODULE, \ |
| } |
| |
| #define MP5416LDO(_name, _id, _dval) \ |
| [MP5416_LDO ## _id] = { \ |
| .id = MP5416_LDO ## _id, \ |
| .name = _name, \ |
| .of_match = _name, \ |
| .regulators_node = "regulators", \ |
| .ops = &mp5416_ldo_ops, \ |
| .min_uV = MP5416_VOLT2_MIN, \ |
| .uV_step = MP5416_VOLT2_STEP, \ |
| .n_voltages = MP5416_VOLT2_RANGE, \ |
| .vsel_reg = MP5416_REG_LDO ##_id, \ |
| .vsel_mask = MP5416_MASK_VSET, \ |
| .enable_reg = MP5416_REG_LDO ##_id, \ |
| .enable_mask = MP5416_REGULATOR_EN, \ |
| .active_discharge_on = _dval, \ |
| .active_discharge_reg = MP5416_REG_CTL2, \ |
| .active_discharge_mask = _dval, \ |
| .owner = THIS_MODULE, \ |
| } |
| |
| enum mp5416_regulators { |
| MP5416_BUCK1, |
| MP5416_BUCK2, |
| MP5416_BUCK3, |
| MP5416_BUCK4, |
| MP5416_LDO1, |
| MP5416_LDO2, |
| MP5416_LDO3, |
| MP5416_LDO4, |
| MP5416_MAX_REGULATORS, |
| }; |
| |
| static const struct regmap_config mp5416_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0x0d, |
| }; |
| |
| /* Current limits array (in uA) |
| * ILIM1 & ILIM3 |
| */ |
| static const unsigned int mp5416_I_limits1[] = { |
| 3800000, 4600000, 5600000, 6800000 |
| }; |
| |
| /* ILIM2 & ILIM4 */ |
| static const unsigned int mp5416_I_limits2[] = { |
| 2200000, 3200000, 4200000, 5200000 |
| }; |
| |
| /* |
| * DVS ramp rate BUCK1 to BUCK4 |
| * 00: 32mV/us |
| * 01: 16mV/us |
| * 10: 8mV/us |
| * 11: 4mV/us |
| */ |
| static const unsigned int mp5416_buck_ramp_table[] = { |
| 32000, 16000, 8000, 4000 |
| }; |
| |
| static const struct regulator_ops mp5416_ldo_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .set_active_discharge = regulator_set_active_discharge_regmap, |
| }; |
| |
| static const struct regulator_ops mp5416_buck_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .set_active_discharge = regulator_set_active_discharge_regmap, |
| .get_current_limit = regulator_get_current_limit_regmap, |
| .set_current_limit = regulator_set_current_limit_regmap, |
| .set_ramp_delay = regulator_set_ramp_delay_regmap, |
| }; |
| |
| static struct regulator_desc mp5416_regulators_desc[MP5416_MAX_REGULATORS] = { |
| MP5416BUCK("buck1", 1, mp5416_I_limits1, MP5416_REG_CTL1, BIT(0), 1), |
| MP5416BUCK("buck2", 2, mp5416_I_limits2, MP5416_REG_CTL1, BIT(1), 2), |
| MP5416BUCK("buck3", 3, mp5416_I_limits1, MP5416_REG_CTL1, BIT(2), 1), |
| MP5416BUCK("buck4", 4, mp5416_I_limits2, MP5416_REG_CTL2, BIT(5), 2), |
| MP5416LDO("ldo1", 1, BIT(4)), |
| MP5416LDO("ldo2", 2, BIT(3)), |
| MP5416LDO("ldo3", 3, BIT(2)), |
| MP5416LDO("ldo4", 4, BIT(1)), |
| }; |
| |
| static struct regulator_desc mp5496_regulators_desc[MP5416_MAX_REGULATORS] = { |
| MP5416BUCK("buck1", 1, mp5416_I_limits1, MP5416_REG_CTL1, BIT(0), 1), |
| MP5416BUCK("buck2", 2, mp5416_I_limits2, MP5416_REG_CTL1, BIT(1), 1), |
| MP5416BUCK("buck3", 3, mp5416_I_limits1, MP5416_REG_CTL1, BIT(2), 1), |
| MP5416BUCK("buck4", 4, mp5416_I_limits2, MP5416_REG_CTL2, BIT(5), 1), |
| MP5416LDO("ldo1", 1, BIT(4)), |
| MP5416LDO("ldo2", 2, BIT(3)), |
| MP5416LDO("ldo3", 3, BIT(2)), |
| MP5416LDO("ldo4", 4, BIT(1)), |
| }; |
| |
| static int mp5416_i2c_probe(struct i2c_client *client) |
| { |
| struct device *dev = &client->dev; |
| struct regulator_config config = { NULL, }; |
| static const struct regulator_desc *desc; |
| struct regulator_dev *rdev; |
| struct regmap *regmap; |
| int i; |
| |
| regmap = devm_regmap_init_i2c(client, &mp5416_regmap_config); |
| if (IS_ERR(regmap)) { |
| dev_err(dev, "Failed to allocate regmap!\n"); |
| return PTR_ERR(regmap); |
| } |
| |
| desc = of_device_get_match_data(dev); |
| if (!desc) |
| return -ENODEV; |
| |
| config.dev = dev; |
| config.regmap = regmap; |
| |
| for (i = 0; i < MP5416_MAX_REGULATORS; i++) { |
| rdev = devm_regulator_register(dev, |
| &desc[i], |
| &config); |
| if (IS_ERR(rdev)) { |
| dev_err(dev, "Failed to register regulator!\n"); |
| return PTR_ERR(rdev); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static const struct of_device_id mp5416_of_match[] = { |
| { .compatible = "mps,mp5416", .data = &mp5416_regulators_desc }, |
| { .compatible = "mps,mp5496", .data = &mp5496_regulators_desc }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, mp5416_of_match); |
| |
| static const struct i2c_device_id mp5416_id[] = { |
| { "mp5416", }, |
| { "mp5496", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, mp5416_id); |
| |
| static struct i2c_driver mp5416_regulator_driver = { |
| .driver = { |
| .name = "mp5416", |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| .of_match_table = of_match_ptr(mp5416_of_match), |
| }, |
| .probe = mp5416_i2c_probe, |
| .id_table = mp5416_id, |
| }; |
| module_i2c_driver(mp5416_regulator_driver); |
| |
| MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>"); |
| MODULE_DESCRIPTION("MP5416 PMIC regulator driver"); |
| MODULE_LICENSE("GPL"); |