| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Intel Platform Monitory Technology Telemetry driver |
| * |
| * Copyright (c) 2020, Intel Corporation. |
| * All Rights Reserved. |
| * |
| * Author: "Alexander Duyck" <alexander.h.duyck@linux.intel.com> |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mm.h> |
| #include <linux/pci.h> |
| |
| #include "class.h" |
| |
| #define PMT_XA_START 0 |
| #define PMT_XA_MAX INT_MAX |
| #define PMT_XA_LIMIT XA_LIMIT(PMT_XA_START, PMT_XA_MAX) |
| |
| /* |
| * Early implementations of PMT on client platforms have some |
| * differences from the server platforms (which use the Out Of Band |
| * Management Services Module OOBMSM). This list tracks those |
| * platforms as needed to handle those differences. Newer client |
| * platforms are expected to be fully compatible with server. |
| */ |
| static const struct pci_device_id pmt_telem_early_client_pci_ids[] = { |
| { PCI_VDEVICE(INTEL, 0x467d) }, /* ADL */ |
| { PCI_VDEVICE(INTEL, 0x490e) }, /* DG1 */ |
| { PCI_VDEVICE(INTEL, 0x9a0d) }, /* TGL */ |
| { } |
| }; |
| |
| bool intel_pmt_is_early_client_hw(struct device *dev) |
| { |
| struct pci_dev *parent = to_pci_dev(dev->parent); |
| |
| return !!pci_match_id(pmt_telem_early_client_pci_ids, parent); |
| } |
| EXPORT_SYMBOL_GPL(intel_pmt_is_early_client_hw); |
| |
| /* |
| * sysfs |
| */ |
| static ssize_t |
| intel_pmt_read(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, char *buf, loff_t off, |
| size_t count) |
| { |
| struct intel_pmt_entry *entry = container_of(attr, |
| struct intel_pmt_entry, |
| pmt_bin_attr); |
| |
| if (off < 0) |
| return -EINVAL; |
| |
| if (off >= entry->size) |
| return 0; |
| |
| if (count > entry->size - off) |
| count = entry->size - off; |
| |
| memcpy_fromio(buf, entry->base + off, count); |
| |
| return count; |
| } |
| |
| static int |
| intel_pmt_mmap(struct file *filp, struct kobject *kobj, |
| struct bin_attribute *attr, struct vm_area_struct *vma) |
| { |
| struct intel_pmt_entry *entry = container_of(attr, |
| struct intel_pmt_entry, |
| pmt_bin_attr); |
| unsigned long vsize = vma->vm_end - vma->vm_start; |
| struct device *dev = kobj_to_dev(kobj); |
| unsigned long phys = entry->base_addr; |
| unsigned long pfn = PFN_DOWN(phys); |
| unsigned long psize; |
| |
| if (vma->vm_flags & (VM_WRITE | VM_MAYWRITE)) |
| return -EROFS; |
| |
| psize = (PFN_UP(entry->base_addr + entry->size) - pfn) * PAGE_SIZE; |
| if (vsize > psize) { |
| dev_err(dev, "Requested mmap size is too large\n"); |
| return -EINVAL; |
| } |
| |
| vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); |
| if (io_remap_pfn_range(vma, vma->vm_start, pfn, |
| vsize, vma->vm_page_prot)) |
| return -EAGAIN; |
| |
| return 0; |
| } |
| |
| static ssize_t |
| guid_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct intel_pmt_entry *entry = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "0x%x\n", entry->guid); |
| } |
| static DEVICE_ATTR_RO(guid); |
| |
| static ssize_t size_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct intel_pmt_entry *entry = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%zu\n", entry->size); |
| } |
| static DEVICE_ATTR_RO(size); |
| |
| static ssize_t |
| offset_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct intel_pmt_entry *entry = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%lu\n", offset_in_page(entry->base_addr)); |
| } |
| static DEVICE_ATTR_RO(offset); |
| |
| static struct attribute *intel_pmt_attrs[] = { |
| &dev_attr_guid.attr, |
| &dev_attr_size.attr, |
| &dev_attr_offset.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(intel_pmt); |
| |
| static struct class intel_pmt_class = { |
| .name = "intel_pmt", |
| .owner = THIS_MODULE, |
| .dev_groups = intel_pmt_groups, |
| }; |
| |
| static int intel_pmt_populate_entry(struct intel_pmt_entry *entry, |
| struct intel_pmt_header *header, |
| struct device *dev, |
| struct resource *disc_res) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev->parent); |
| u8 bir; |
| |
| /* |
| * The base offset should always be 8 byte aligned. |
| * |
| * For non-local access types the lower 3 bits of base offset |
| * contains the index of the base address register where the |
| * telemetry can be found. |
| */ |
| bir = GET_BIR(header->base_offset); |
| |
| /* Local access and BARID only for now */ |
| switch (header->access_type) { |
| case ACCESS_LOCAL: |
| if (bir) { |
| dev_err(dev, |
| "Unsupported BAR index %d for access type %d\n", |
| bir, header->access_type); |
| return -EINVAL; |
| } |
| /* |
| * For access_type LOCAL, the base address is as follows: |
| * base address = end of discovery region + base offset |
| */ |
| entry->base_addr = disc_res->end + 1 + header->base_offset; |
| |
| /* |
| * Some hardware use a different calculation for the base address |
| * when access_type == ACCESS_LOCAL. On the these systems |
| * ACCCESS_LOCAL refers to an address in the same BAR as the |
| * header but at a fixed offset. But as the header address was |
| * supplied to the driver, we don't know which BAR it was in. |
| * So search for the bar whose range includes the header address. |
| */ |
| if (intel_pmt_is_early_client_hw(dev)) { |
| int i; |
| |
| entry->base_addr = 0; |
| for (i = 0; i < 6; i++) |
| if (disc_res->start >= pci_resource_start(pci_dev, i) && |
| (disc_res->start <= pci_resource_end(pci_dev, i))) { |
| entry->base_addr = pci_resource_start(pci_dev, i) + |
| header->base_offset; |
| break; |
| } |
| if (!entry->base_addr) |
| return -EINVAL; |
| } |
| |
| break; |
| case ACCESS_BARID: |
| /* |
| * If another BAR was specified then the base offset |
| * represents the offset within that BAR. SO retrieve the |
| * address from the parent PCI device and add offset. |
| */ |
| entry->base_addr = pci_resource_start(pci_dev, bir) + |
| GET_ADDRESS(header->base_offset); |
| break; |
| default: |
| dev_err(dev, "Unsupported access type %d\n", |
| header->access_type); |
| return -EINVAL; |
| } |
| |
| entry->guid = header->guid; |
| entry->size = header->size; |
| |
| return 0; |
| } |
| |
| static int intel_pmt_dev_register(struct intel_pmt_entry *entry, |
| struct intel_pmt_namespace *ns, |
| struct device *parent) |
| { |
| struct resource res = {0}; |
| struct device *dev; |
| int ret; |
| |
| ret = xa_alloc(ns->xa, &entry->devid, entry, PMT_XA_LIMIT, GFP_KERNEL); |
| if (ret) |
| return ret; |
| |
| dev = device_create(&intel_pmt_class, parent, MKDEV(0, 0), entry, |
| "%s%d", ns->name, entry->devid); |
| |
| if (IS_ERR(dev)) { |
| dev_err(parent, "Could not create %s%d device node\n", |
| ns->name, entry->devid); |
| ret = PTR_ERR(dev); |
| goto fail_dev_create; |
| } |
| |
| entry->kobj = &dev->kobj; |
| |
| if (ns->attr_grp) { |
| ret = sysfs_create_group(entry->kobj, ns->attr_grp); |
| if (ret) |
| goto fail_sysfs; |
| } |
| |
| /* if size is 0 assume no data buffer, so no file needed */ |
| if (!entry->size) |
| return 0; |
| |
| res.start = entry->base_addr; |
| res.end = res.start + entry->size - 1; |
| res.flags = IORESOURCE_MEM; |
| |
| entry->base = devm_ioremap_resource(dev, &res); |
| if (IS_ERR(entry->base)) { |
| ret = PTR_ERR(entry->base); |
| goto fail_ioremap; |
| } |
| |
| sysfs_bin_attr_init(&entry->pmt_bin_attr); |
| entry->pmt_bin_attr.attr.name = ns->name; |
| entry->pmt_bin_attr.attr.mode = 0440; |
| entry->pmt_bin_attr.mmap = intel_pmt_mmap; |
| entry->pmt_bin_attr.read = intel_pmt_read; |
| entry->pmt_bin_attr.size = entry->size; |
| |
| ret = sysfs_create_bin_file(&dev->kobj, &entry->pmt_bin_attr); |
| if (!ret) |
| return 0; |
| |
| fail_ioremap: |
| if (ns->attr_grp) |
| sysfs_remove_group(entry->kobj, ns->attr_grp); |
| fail_sysfs: |
| device_unregister(dev); |
| fail_dev_create: |
| xa_erase(ns->xa, entry->devid); |
| |
| return ret; |
| } |
| |
| int intel_pmt_dev_create(struct intel_pmt_entry *entry, |
| struct intel_pmt_namespace *ns, |
| struct platform_device *pdev, int idx) |
| { |
| struct intel_pmt_header header; |
| struct resource *disc_res; |
| int ret = -ENODEV; |
| |
| disc_res = platform_get_resource(pdev, IORESOURCE_MEM, idx); |
| if (!disc_res) |
| return ret; |
| |
| entry->disc_table = devm_platform_ioremap_resource(pdev, idx); |
| if (IS_ERR(entry->disc_table)) |
| return PTR_ERR(entry->disc_table); |
| |
| ret = ns->pmt_header_decode(entry, &header, &pdev->dev); |
| if (ret) |
| return ret; |
| |
| ret = intel_pmt_populate_entry(entry, &header, &pdev->dev, disc_res); |
| if (ret) |
| return ret; |
| |
| return intel_pmt_dev_register(entry, ns, &pdev->dev); |
| |
| } |
| EXPORT_SYMBOL_GPL(intel_pmt_dev_create); |
| |
| void intel_pmt_dev_destroy(struct intel_pmt_entry *entry, |
| struct intel_pmt_namespace *ns) |
| { |
| struct device *dev = kobj_to_dev(entry->kobj); |
| |
| if (entry->size) |
| sysfs_remove_bin_file(entry->kobj, &entry->pmt_bin_attr); |
| |
| if (ns->attr_grp) |
| sysfs_remove_group(entry->kobj, ns->attr_grp); |
| |
| device_unregister(dev); |
| xa_erase(ns->xa, entry->devid); |
| } |
| EXPORT_SYMBOL_GPL(intel_pmt_dev_destroy); |
| |
| static int __init pmt_class_init(void) |
| { |
| return class_register(&intel_pmt_class); |
| } |
| |
| static void __exit pmt_class_exit(void) |
| { |
| class_unregister(&intel_pmt_class); |
| } |
| |
| module_init(pmt_class_init); |
| module_exit(pmt_class_exit); |
| |
| MODULE_AUTHOR("Alexander Duyck <alexander.h.duyck@linux.intel.com>"); |
| MODULE_DESCRIPTION("Intel PMT Class driver"); |
| MODULE_LICENSE("GPL v2"); |