| /* |
| * linux/drivers/video/s3fb.c -- Frame buffer device driver for S3 Trio/Virge |
| * |
| * Copyright (c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org> |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| * |
| * Code is based on David Boucher's viafb (http://davesdomain.org.uk/viafb/) |
| * which is based on the code of neofb. |
| */ |
| |
| #include <linux/version.h> |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/tty.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/fb.h> |
| #include <linux/svga.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/console.h> /* Why should fb driver call console functions? because acquire_console_sem() */ |
| #include <video/vga.h> |
| |
| #ifdef CONFIG_MTRR |
| #include <asm/mtrr.h> |
| #endif |
| |
| struct s3fb_info { |
| int chip, rev, mclk_freq; |
| int mtrr_reg; |
| struct vgastate state; |
| struct mutex open_lock; |
| unsigned int ref_count; |
| u32 pseudo_palette[16]; |
| }; |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| static const struct svga_fb_format s3fb_formats[] = { |
| { 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0, |
| FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16}, |
| { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0, |
| FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16}, |
| { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 1, |
| FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16}, |
| { 8, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0, |
| FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8}, |
| {16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0, |
| FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4}, |
| {16, {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0}, 0, |
| FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4}, |
| {24, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0, |
| FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2}, |
| {32, {16, 8, 0}, {8, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0, |
| FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 1, 2}, |
| SVGA_FORMAT_END |
| }; |
| |
| |
| static const struct svga_pll s3_pll = {3, 129, 3, 33, 0, 3, |
| 35000, 240000, 14318}; |
| |
| static const int s3_memsizes[] = {4096, 0, 3072, 8192, 2048, 6144, 1024, 512}; |
| |
| static const char * const s3_names[] = {"S3 Unknown", "S3 Trio32", "S3 Trio64", "S3 Trio64V+", |
| "S3 Trio64UV+", "S3 Trio64V2/DX", "S3 Trio64V2/GX", |
| "S3 Plato/PX", "S3 Aurora64VP", "S3 Virge", |
| "S3 Virge/VX", "S3 Virge/DX", "S3 Virge/GX", |
| "S3 Virge/GX2", "S3 Virge/GX2P", "S3 Virge/GX2P"}; |
| |
| #define CHIP_UNKNOWN 0x00 |
| #define CHIP_732_TRIO32 0x01 |
| #define CHIP_764_TRIO64 0x02 |
| #define CHIP_765_TRIO64VP 0x03 |
| #define CHIP_767_TRIO64UVP 0x04 |
| #define CHIP_775_TRIO64V2_DX 0x05 |
| #define CHIP_785_TRIO64V2_GX 0x06 |
| #define CHIP_551_PLATO_PX 0x07 |
| #define CHIP_M65_AURORA64VP 0x08 |
| #define CHIP_325_VIRGE 0x09 |
| #define CHIP_988_VIRGE_VX 0x0A |
| #define CHIP_375_VIRGE_DX 0x0B |
| #define CHIP_385_VIRGE_GX 0x0C |
| #define CHIP_356_VIRGE_GX2 0x0D |
| #define CHIP_357_VIRGE_GX2P 0x0E |
| #define CHIP_359_VIRGE_GX2P 0x0F |
| |
| #define CHIP_XXX_TRIO 0x80 |
| #define CHIP_XXX_TRIO64V2_DXGX 0x81 |
| #define CHIP_XXX_VIRGE_DXGX 0x82 |
| |
| #define CHIP_UNDECIDED_FLAG 0x80 |
| #define CHIP_MASK 0xFF |
| |
| /* CRT timing register sets */ |
| |
| static const struct vga_regset s3_h_total_regs[] = {{0x00, 0, 7}, {0x5D, 0, 0}, VGA_REGSET_END}; |
| static const struct vga_regset s3_h_display_regs[] = {{0x01, 0, 7}, {0x5D, 1, 1}, VGA_REGSET_END}; |
| static const struct vga_regset s3_h_blank_start_regs[] = {{0x02, 0, 7}, {0x5D, 2, 2}, VGA_REGSET_END}; |
| static const struct vga_regset s3_h_blank_end_regs[] = {{0x03, 0, 4}, {0x05, 7, 7}, VGA_REGSET_END}; |
| static const struct vga_regset s3_h_sync_start_regs[] = {{0x04, 0, 7}, {0x5D, 4, 4}, VGA_REGSET_END}; |
| static const struct vga_regset s3_h_sync_end_regs[] = {{0x05, 0, 4}, VGA_REGSET_END}; |
| |
| static const struct vga_regset s3_v_total_regs[] = {{0x06, 0, 7}, {0x07, 0, 0}, {0x07, 5, 5}, {0x5E, 0, 0}, VGA_REGSET_END}; |
| static const struct vga_regset s3_v_display_regs[] = {{0x12, 0, 7}, {0x07, 1, 1}, {0x07, 6, 6}, {0x5E, 1, 1}, VGA_REGSET_END}; |
| static const struct vga_regset s3_v_blank_start_regs[] = {{0x15, 0, 7}, {0x07, 3, 3}, {0x09, 5, 5}, {0x5E, 2, 2}, VGA_REGSET_END}; |
| static const struct vga_regset s3_v_blank_end_regs[] = {{0x16, 0, 7}, VGA_REGSET_END}; |
| static const struct vga_regset s3_v_sync_start_regs[] = {{0x10, 0, 7}, {0x07, 2, 2}, {0x07, 7, 7}, {0x5E, 4, 4}, VGA_REGSET_END}; |
| static const struct vga_regset s3_v_sync_end_regs[] = {{0x11, 0, 3}, VGA_REGSET_END}; |
| |
| static const struct vga_regset s3_line_compare_regs[] = {{0x18, 0, 7}, {0x07, 4, 4}, {0x09, 6, 6}, {0x5E, 6, 6}, VGA_REGSET_END}; |
| static const struct vga_regset s3_start_address_regs[] = {{0x0d, 0, 7}, {0x0c, 0, 7}, {0x31, 4, 5}, {0x51, 0, 1}, VGA_REGSET_END}; |
| static const struct vga_regset s3_offset_regs[] = {{0x13, 0, 7}, {0x51, 4, 5}, VGA_REGSET_END}; /* set 0x43 bit 2 to 0 */ |
| |
| static const struct svga_timing_regs s3_timing_regs = { |
| s3_h_total_regs, s3_h_display_regs, s3_h_blank_start_regs, |
| s3_h_blank_end_regs, s3_h_sync_start_regs, s3_h_sync_end_regs, |
| s3_v_total_regs, s3_v_display_regs, s3_v_blank_start_regs, |
| s3_v_blank_end_regs, s3_v_sync_start_regs, s3_v_sync_end_regs, |
| }; |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Module parameters */ |
| |
| |
| static char *mode = "640x480-8@60"; |
| |
| #ifdef CONFIG_MTRR |
| static int mtrr = 1; |
| #endif |
| |
| static int fasttext = 1; |
| |
| |
| MODULE_AUTHOR("(c) 2006-2007 Ondrej Zajicek <santiago@crfreenet.org>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("fbdev driver for S3 Trio/Virge"); |
| |
| module_param(mode, charp, 0444); |
| MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc)"); |
| |
| #ifdef CONFIG_MTRR |
| module_param(mtrr, int, 0444); |
| MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)"); |
| #endif |
| |
| module_param(fasttext, int, 0644); |
| MODULE_PARM_DESC(fasttext, "Enable S3 fast text mode (1=enable, 0=disable, default=1)"); |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Set font in S3 fast text mode */ |
| |
| static void s3fb_settile_fast(struct fb_info *info, struct fb_tilemap *map) |
| { |
| const u8 *font = map->data; |
| u8 __iomem *fb = (u8 __iomem *) info->screen_base; |
| int i, c; |
| |
| if ((map->width != 8) || (map->height != 16) || |
| (map->depth != 1) || (map->length != 256)) { |
| printk(KERN_ERR "fb%d: unsupported font parameters: width %d, height %d, depth %d, length %d\n", |
| info->node, map->width, map->height, map->depth, map->length); |
| return; |
| } |
| |
| fb += 2; |
| for (i = 0; i < map->height; i++) { |
| for (c = 0; c < map->length; c++) { |
| fb_writeb(font[c * map->height + i], fb + c * 4); |
| } |
| fb += 1024; |
| } |
| } |
| |
| static int s3fb_get_tilemax(struct fb_info *info) |
| { |
| return 256; |
| } |
| |
| static struct fb_tile_ops s3fb_tile_ops = { |
| .fb_settile = svga_settile, |
| .fb_tilecopy = svga_tilecopy, |
| .fb_tilefill = svga_tilefill, |
| .fb_tileblit = svga_tileblit, |
| .fb_tilecursor = svga_tilecursor, |
| .fb_get_tilemax = s3fb_get_tilemax, |
| }; |
| |
| static struct fb_tile_ops s3fb_fast_tile_ops = { |
| .fb_settile = s3fb_settile_fast, |
| .fb_tilecopy = svga_tilecopy, |
| .fb_tilefill = svga_tilefill, |
| .fb_tileblit = svga_tileblit, |
| .fb_tilecursor = svga_tilecursor, |
| .fb_get_tilemax = s3fb_get_tilemax, |
| }; |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* image data is MSB-first, fb structure is MSB-first too */ |
| static inline u32 expand_color(u32 c) |
| { |
| return ((c & 1) | ((c & 2) << 7) | ((c & 4) << 14) | ((c & 8) << 21)) * 0xFF; |
| } |
| |
| /* s3fb_iplan_imageblit silently assumes that almost everything is 8-pixel aligned */ |
| static void s3fb_iplan_imageblit(struct fb_info *info, const struct fb_image *image) |
| { |
| u32 fg = expand_color(image->fg_color); |
| u32 bg = expand_color(image->bg_color); |
| const u8 *src1, *src; |
| u8 __iomem *dst1; |
| u32 __iomem *dst; |
| u32 val; |
| int x, y; |
| |
| src1 = image->data; |
| dst1 = info->screen_base + (image->dy * info->fix.line_length) |
| + ((image->dx / 8) * 4); |
| |
| for (y = 0; y < image->height; y++) { |
| src = src1; |
| dst = (u32 __iomem *) dst1; |
| for (x = 0; x < image->width; x += 8) { |
| val = *(src++) * 0x01010101; |
| val = (val & fg) | (~val & bg); |
| fb_writel(val, dst++); |
| } |
| src1 += image->width / 8; |
| dst1 += info->fix.line_length; |
| } |
| |
| } |
| |
| /* s3fb_iplan_fillrect silently assumes that almost everything is 8-pixel aligned */ |
| static void s3fb_iplan_fillrect(struct fb_info *info, const struct fb_fillrect *rect) |
| { |
| u32 fg = expand_color(rect->color); |
| u8 __iomem *dst1; |
| u32 __iomem *dst; |
| int x, y; |
| |
| dst1 = info->screen_base + (rect->dy * info->fix.line_length) |
| + ((rect->dx / 8) * 4); |
| |
| for (y = 0; y < rect->height; y++) { |
| dst = (u32 __iomem *) dst1; |
| for (x = 0; x < rect->width; x += 8) { |
| fb_writel(fg, dst++); |
| } |
| dst1 += info->fix.line_length; |
| } |
| } |
| |
| |
| /* image data is MSB-first, fb structure is high-nibble-in-low-byte-first */ |
| static inline u32 expand_pixel(u32 c) |
| { |
| return (((c & 1) << 24) | ((c & 2) << 27) | ((c & 4) << 14) | ((c & 8) << 17) | |
| ((c & 16) << 4) | ((c & 32) << 7) | ((c & 64) >> 6) | ((c & 128) >> 3)) * 0xF; |
| } |
| |
| /* s3fb_cfb4_imageblit silently assumes that almost everything is 8-pixel aligned */ |
| static void s3fb_cfb4_imageblit(struct fb_info *info, const struct fb_image *image) |
| { |
| u32 fg = image->fg_color * 0x11111111; |
| u32 bg = image->bg_color * 0x11111111; |
| const u8 *src1, *src; |
| u8 __iomem *dst1; |
| u32 __iomem *dst; |
| u32 val; |
| int x, y; |
| |
| src1 = image->data; |
| dst1 = info->screen_base + (image->dy * info->fix.line_length) |
| + ((image->dx / 8) * 4); |
| |
| for (y = 0; y < image->height; y++) { |
| src = src1; |
| dst = (u32 __iomem *) dst1; |
| for (x = 0; x < image->width; x += 8) { |
| val = expand_pixel(*(src++)); |
| val = (val & fg) | (~val & bg); |
| fb_writel(val, dst++); |
| } |
| src1 += image->width / 8; |
| dst1 += info->fix.line_length; |
| } |
| } |
| |
| static void s3fb_imageblit(struct fb_info *info, const struct fb_image *image) |
| { |
| if ((info->var.bits_per_pixel == 4) && (image->depth == 1) |
| && ((image->width % 8) == 0) && ((image->dx % 8) == 0)) { |
| if (info->fix.type == FB_TYPE_INTERLEAVED_PLANES) |
| s3fb_iplan_imageblit(info, image); |
| else |
| s3fb_cfb4_imageblit(info, image); |
| } else |
| cfb_imageblit(info, image); |
| } |
| |
| static void s3fb_fillrect(struct fb_info *info, const struct fb_fillrect *rect) |
| { |
| if ((info->var.bits_per_pixel == 4) |
| && ((rect->width % 8) == 0) && ((rect->dx % 8) == 0) |
| && (info->fix.type == FB_TYPE_INTERLEAVED_PLANES)) |
| s3fb_iplan_fillrect(info, rect); |
| else |
| cfb_fillrect(info, rect); |
| } |
| |
| |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| |
| static void s3_set_pixclock(struct fb_info *info, u32 pixclock) |
| { |
| u16 m, n, r; |
| u8 regval; |
| int rv; |
| |
| rv = svga_compute_pll(&s3_pll, 1000000000 / pixclock, &m, &n, &r, info->node); |
| if (rv < 0) { |
| printk(KERN_ERR "fb%d: cannot set requested pixclock, keeping old value\n", info->node); |
| return; |
| } |
| |
| /* Set VGA misc register */ |
| regval = vga_r(NULL, VGA_MIS_R); |
| vga_w(NULL, VGA_MIS_W, regval | VGA_MIS_ENB_PLL_LOAD); |
| |
| /* Set S3 clock registers */ |
| vga_wseq(NULL, 0x12, ((n - 2) | (r << 5))); |
| vga_wseq(NULL, 0x13, m - 2); |
| |
| udelay(1000); |
| |
| /* Activate clock - write 0, 1, 0 to seq/15 bit 5 */ |
| regval = vga_rseq (NULL, 0x15); /* | 0x80; */ |
| vga_wseq(NULL, 0x15, regval & ~(1<<5)); |
| vga_wseq(NULL, 0x15, regval | (1<<5)); |
| vga_wseq(NULL, 0x15, regval & ~(1<<5)); |
| } |
| |
| |
| /* Open framebuffer */ |
| |
| static int s3fb_open(struct fb_info *info, int user) |
| { |
| struct s3fb_info *par = info->par; |
| |
| mutex_lock(&(par->open_lock)); |
| if (par->ref_count == 0) { |
| memset(&(par->state), 0, sizeof(struct vgastate)); |
| par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS | VGA_SAVE_CMAP; |
| par->state.num_crtc = 0x70; |
| par->state.num_seq = 0x20; |
| save_vga(&(par->state)); |
| } |
| |
| par->ref_count++; |
| mutex_unlock(&(par->open_lock)); |
| |
| return 0; |
| } |
| |
| /* Close framebuffer */ |
| |
| static int s3fb_release(struct fb_info *info, int user) |
| { |
| struct s3fb_info *par = info->par; |
| |
| mutex_lock(&(par->open_lock)); |
| if (par->ref_count == 0) { |
| mutex_unlock(&(par->open_lock)); |
| return -EINVAL; |
| } |
| |
| if (par->ref_count == 1) |
| restore_vga(&(par->state)); |
| |
| par->ref_count--; |
| mutex_unlock(&(par->open_lock)); |
| |
| return 0; |
| } |
| |
| /* Validate passed in var */ |
| |
| static int s3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) |
| { |
| struct s3fb_info *par = info->par; |
| int rv, mem, step; |
| |
| /* Find appropriate format */ |
| rv = svga_match_format (s3fb_formats, var, NULL); |
| if ((rv < 0) || ((par->chip == CHIP_988_VIRGE_VX) ? (rv == 7) : (rv == 6))) |
| { /* 24bpp on VIRGE VX, 32bpp on others */ |
| printk(KERN_ERR "fb%d: unsupported mode requested\n", info->node); |
| return rv; |
| } |
| |
| /* Do not allow to have real resoulution larger than virtual */ |
| if (var->xres > var->xres_virtual) |
| var->xres_virtual = var->xres; |
| |
| if (var->yres > var->yres_virtual) |
| var->yres_virtual = var->yres; |
| |
| /* Round up xres_virtual to have proper alignment of lines */ |
| step = s3fb_formats[rv].xresstep - 1; |
| var->xres_virtual = (var->xres_virtual+step) & ~step; |
| |
| /* Check whether have enough memory */ |
| mem = ((var->bits_per_pixel * var->xres_virtual) >> 3) * var->yres_virtual; |
| if (mem > info->screen_size) |
| { |
| printk(KERN_ERR "fb%d: not enough framebuffer memory (%d kB requested , %d kB available)\n", |
| info->node, mem >> 10, (unsigned int) (info->screen_size >> 10)); |
| return -EINVAL; |
| } |
| |
| rv = svga_check_timings (&s3_timing_regs, var, info->node); |
| if (rv < 0) |
| { |
| printk(KERN_ERR "fb%d: invalid timings requested\n", info->node); |
| return rv; |
| } |
| |
| return 0; |
| } |
| |
| /* Set video mode from par */ |
| |
| static int s3fb_set_par(struct fb_info *info) |
| { |
| struct s3fb_info *par = info->par; |
| u32 value, mode, hmul, offset_value, screen_size, multiplex; |
| u32 bpp = info->var.bits_per_pixel; |
| |
| if (bpp != 0) { |
| info->fix.ypanstep = 1; |
| info->fix.line_length = (info->var.xres_virtual * bpp) / 8; |
| |
| info->flags &= ~FBINFO_MISC_TILEBLITTING; |
| info->tileops = NULL; |
| |
| /* supports blit rectangles of any dimension */ |
| info->pixmap.blit_x = ~(u32)0; |
| info->pixmap.blit_y = ~(u32)0; |
| offset_value = (info->var.xres_virtual * bpp) / 64; |
| screen_size = info->var.yres_virtual * info->fix.line_length; |
| } else { |
| info->fix.ypanstep = 16; |
| info->fix.line_length = 0; |
| |
| info->flags |= FBINFO_MISC_TILEBLITTING; |
| info->tileops = fasttext ? &s3fb_fast_tile_ops : &s3fb_tile_ops; |
| /* supports 8x16 tiles only */ |
| info->pixmap.blit_x = 1 << (8 - 1); |
| info->pixmap.blit_y = 1 << (16 - 1); |
| |
| offset_value = info->var.xres_virtual / 16; |
| screen_size = (info->var.xres_virtual * info->var.yres_virtual) / 64; |
| } |
| |
| info->var.xoffset = 0; |
| info->var.yoffset = 0; |
| info->var.activate = FB_ACTIVATE_NOW; |
| |
| /* Unlock registers */ |
| vga_wcrt(NULL, 0x38, 0x48); |
| vga_wcrt(NULL, 0x39, 0xA5); |
| vga_wseq(NULL, 0x08, 0x06); |
| svga_wcrt_mask(0x11, 0x00, 0x80); |
| |
| /* Blank screen and turn off sync */ |
| svga_wseq_mask(0x01, 0x20, 0x20); |
| svga_wcrt_mask(0x17, 0x00, 0x80); |
| |
| /* Set default values */ |
| svga_set_default_gfx_regs(); |
| svga_set_default_atc_regs(); |
| svga_set_default_seq_regs(); |
| svga_set_default_crt_regs(); |
| svga_wcrt_multi(s3_line_compare_regs, 0xFFFFFFFF); |
| svga_wcrt_multi(s3_start_address_regs, 0); |
| |
| /* S3 specific initialization */ |
| svga_wcrt_mask(0x58, 0x10, 0x10); /* enable linear framebuffer */ |
| svga_wcrt_mask(0x31, 0x08, 0x08); /* enable sequencer access to framebuffer above 256 kB */ |
| |
| /* svga_wcrt_mask(0x33, 0x08, 0x08); */ /* DDR ? */ |
| /* svga_wcrt_mask(0x43, 0x01, 0x01); */ /* DDR ? */ |
| svga_wcrt_mask(0x33, 0x00, 0x08); /* no DDR ? */ |
| svga_wcrt_mask(0x43, 0x00, 0x01); /* no DDR ? */ |
| |
| svga_wcrt_mask(0x5D, 0x00, 0x28); // Clear strange HSlen bits |
| |
| /* svga_wcrt_mask(0x58, 0x03, 0x03); */ |
| |
| /* svga_wcrt_mask(0x53, 0x12, 0x13); */ /* enable MMIO */ |
| /* svga_wcrt_mask(0x40, 0x08, 0x08); */ /* enable write buffer */ |
| |
| |
| /* Set the offset register */ |
| pr_debug("fb%d: offset register : %d\n", info->node, offset_value); |
| svga_wcrt_multi(s3_offset_regs, offset_value); |
| |
| vga_wcrt(NULL, 0x54, 0x18); /* M parameter */ |
| vga_wcrt(NULL, 0x60, 0xff); /* N parameter */ |
| vga_wcrt(NULL, 0x61, 0xff); /* L parameter */ |
| vga_wcrt(NULL, 0x62, 0xff); /* L parameter */ |
| |
| vga_wcrt(NULL, 0x3A, 0x35); |
| svga_wattr(0x33, 0x00); |
| |
| if (info->var.vmode & FB_VMODE_DOUBLE) |
| svga_wcrt_mask(0x09, 0x80, 0x80); |
| else |
| svga_wcrt_mask(0x09, 0x00, 0x80); |
| |
| if (info->var.vmode & FB_VMODE_INTERLACED) |
| svga_wcrt_mask(0x42, 0x20, 0x20); |
| else |
| svga_wcrt_mask(0x42, 0x00, 0x20); |
| |
| /* Disable hardware graphics cursor */ |
| svga_wcrt_mask(0x45, 0x00, 0x01); |
| /* Disable Streams engine */ |
| svga_wcrt_mask(0x67, 0x00, 0x0C); |
| |
| mode = svga_match_format(s3fb_formats, &(info->var), &(info->fix)); |
| |
| /* S3 virge DX hack */ |
| if (par->chip == CHIP_375_VIRGE_DX) { |
| vga_wcrt(NULL, 0x86, 0x80); |
| vga_wcrt(NULL, 0x90, 0x00); |
| } |
| |
| /* S3 virge VX hack */ |
| if (par->chip == CHIP_988_VIRGE_VX) { |
| vga_wcrt(NULL, 0x50, 0x00); |
| vga_wcrt(NULL, 0x67, 0x50); |
| |
| vga_wcrt(NULL, 0x63, (mode <= 2) ? 0x90 : 0x09); |
| vga_wcrt(NULL, 0x66, 0x90); |
| } |
| |
| svga_wcrt_mask(0x31, 0x00, 0x40); |
| multiplex = 0; |
| hmul = 1; |
| |
| /* Set mode-specific register values */ |
| switch (mode) { |
| case 0: |
| pr_debug("fb%d: text mode\n", info->node); |
| svga_set_textmode_vga_regs(); |
| |
| /* Set additional registers like in 8-bit mode */ |
| svga_wcrt_mask(0x50, 0x00, 0x30); |
| svga_wcrt_mask(0x67, 0x00, 0xF0); |
| |
| /* Disable enhanced mode */ |
| svga_wcrt_mask(0x3A, 0x00, 0x30); |
| |
| if (fasttext) { |
| pr_debug("fb%d: high speed text mode set\n", info->node); |
| svga_wcrt_mask(0x31, 0x40, 0x40); |
| } |
| break; |
| case 1: |
| pr_debug("fb%d: 4 bit pseudocolor\n", info->node); |
| vga_wgfx(NULL, VGA_GFX_MODE, 0x40); |
| |
| /* Set additional registers like in 8-bit mode */ |
| svga_wcrt_mask(0x50, 0x00, 0x30); |
| svga_wcrt_mask(0x67, 0x00, 0xF0); |
| |
| /* disable enhanced mode */ |
| svga_wcrt_mask(0x3A, 0x00, 0x30); |
| break; |
| case 2: |
| pr_debug("fb%d: 4 bit pseudocolor, planar\n", info->node); |
| |
| /* Set additional registers like in 8-bit mode */ |
| svga_wcrt_mask(0x50, 0x00, 0x30); |
| svga_wcrt_mask(0x67, 0x00, 0xF0); |
| |
| /* disable enhanced mode */ |
| svga_wcrt_mask(0x3A, 0x00, 0x30); |
| break; |
| case 3: |
| pr_debug("fb%d: 8 bit pseudocolor\n", info->node); |
| if (info->var.pixclock > 20000) { |
| svga_wcrt_mask(0x50, 0x00, 0x30); |
| svga_wcrt_mask(0x67, 0x00, 0xF0); |
| } else { |
| svga_wcrt_mask(0x50, 0x00, 0x30); |
| svga_wcrt_mask(0x67, 0x10, 0xF0); |
| multiplex = 1; |
| } |
| break; |
| case 4: |
| pr_debug("fb%d: 5/5/5 truecolor\n", info->node); |
| if (par->chip == CHIP_988_VIRGE_VX) { |
| if (info->var.pixclock > 20000) |
| svga_wcrt_mask(0x67, 0x20, 0xF0); |
| else |
| svga_wcrt_mask(0x67, 0x30, 0xF0); |
| } else { |
| svga_wcrt_mask(0x50, 0x10, 0x30); |
| svga_wcrt_mask(0x67, 0x30, 0xF0); |
| hmul = 2; |
| } |
| break; |
| case 5: |
| pr_debug("fb%d: 5/6/5 truecolor\n", info->node); |
| if (par->chip == CHIP_988_VIRGE_VX) { |
| if (info->var.pixclock > 20000) |
| svga_wcrt_mask(0x67, 0x40, 0xF0); |
| else |
| svga_wcrt_mask(0x67, 0x50, 0xF0); |
| } else { |
| svga_wcrt_mask(0x50, 0x10, 0x30); |
| svga_wcrt_mask(0x67, 0x50, 0xF0); |
| hmul = 2; |
| } |
| break; |
| case 6: |
| /* VIRGE VX case */ |
| pr_debug("fb%d: 8/8/8 truecolor\n", info->node); |
| svga_wcrt_mask(0x67, 0xD0, 0xF0); |
| break; |
| case 7: |
| pr_debug("fb%d: 8/8/8/8 truecolor\n", info->node); |
| svga_wcrt_mask(0x50, 0x30, 0x30); |
| svga_wcrt_mask(0x67, 0xD0, 0xF0); |
| break; |
| default: |
| printk(KERN_ERR "fb%d: unsupported mode - bug\n", info->node); |
| return -EINVAL; |
| } |
| |
| if (par->chip != CHIP_988_VIRGE_VX) { |
| svga_wseq_mask(0x15, multiplex ? 0x10 : 0x00, 0x10); |
| svga_wseq_mask(0x18, multiplex ? 0x80 : 0x00, 0x80); |
| } |
| |
| s3_set_pixclock(info, info->var.pixclock); |
| svga_set_timings(&s3_timing_regs, &(info->var), hmul, 1, |
| (info->var.vmode & FB_VMODE_DOUBLE) ? 2 : 1, |
| (info->var.vmode & FB_VMODE_INTERLACED) ? 2 : 1, |
| hmul, info->node); |
| |
| /* Set interlaced mode start/end register */ |
| value = info->var.xres + info->var.left_margin + info->var.right_margin + info->var.hsync_len; |
| value = ((value * hmul) / 8) - 5; |
| vga_wcrt(NULL, 0x3C, (value + 1) / 2); |
| |
| memset_io(info->screen_base, 0x00, screen_size); |
| /* Device and screen back on */ |
| svga_wcrt_mask(0x17, 0x80, 0x80); |
| svga_wseq_mask(0x01, 0x00, 0x20); |
| |
| return 0; |
| } |
| |
| /* Set a colour register */ |
| |
| static int s3fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, |
| u_int transp, struct fb_info *fb) |
| { |
| switch (fb->var.bits_per_pixel) { |
| case 0: |
| case 4: |
| if (regno >= 16) |
| return -EINVAL; |
| |
| if ((fb->var.bits_per_pixel == 4) && |
| (fb->var.nonstd == 0)) { |
| outb(0xF0, VGA_PEL_MSK); |
| outb(regno*16, VGA_PEL_IW); |
| } else { |
| outb(0x0F, VGA_PEL_MSK); |
| outb(regno, VGA_PEL_IW); |
| } |
| outb(red >> 10, VGA_PEL_D); |
| outb(green >> 10, VGA_PEL_D); |
| outb(blue >> 10, VGA_PEL_D); |
| break; |
| case 8: |
| if (regno >= 256) |
| return -EINVAL; |
| |
| outb(0xFF, VGA_PEL_MSK); |
| outb(regno, VGA_PEL_IW); |
| outb(red >> 10, VGA_PEL_D); |
| outb(green >> 10, VGA_PEL_D); |
| outb(blue >> 10, VGA_PEL_D); |
| break; |
| case 16: |
| if (regno >= 16) |
| return 0; |
| |
| if (fb->var.green.length == 5) |
| ((u32*)fb->pseudo_palette)[regno] = ((red & 0xF800) >> 1) | |
| ((green & 0xF800) >> 6) | ((blue & 0xF800) >> 11); |
| else if (fb->var.green.length == 6) |
| ((u32*)fb->pseudo_palette)[regno] = (red & 0xF800) | |
| ((green & 0xFC00) >> 5) | ((blue & 0xF800) >> 11); |
| else return -EINVAL; |
| break; |
| case 24: |
| case 32: |
| if (regno >= 16) |
| return 0; |
| |
| ((u32*)fb->pseudo_palette)[regno] = ((red & 0xFF00) << 8) | |
| (green & 0xFF00) | ((blue & 0xFF00) >> 8); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| |
| /* Set the display blanking state */ |
| |
| static int s3fb_blank(int blank_mode, struct fb_info *info) |
| { |
| switch (blank_mode) { |
| case FB_BLANK_UNBLANK: |
| pr_debug("fb%d: unblank\n", info->node); |
| svga_wcrt_mask(0x56, 0x00, 0x06); |
| svga_wseq_mask(0x01, 0x00, 0x20); |
| break; |
| case FB_BLANK_NORMAL: |
| pr_debug("fb%d: blank\n", info->node); |
| svga_wcrt_mask(0x56, 0x00, 0x06); |
| svga_wseq_mask(0x01, 0x20, 0x20); |
| break; |
| case FB_BLANK_HSYNC_SUSPEND: |
| pr_debug("fb%d: hsync\n", info->node); |
| svga_wcrt_mask(0x56, 0x02, 0x06); |
| svga_wseq_mask(0x01, 0x20, 0x20); |
| break; |
| case FB_BLANK_VSYNC_SUSPEND: |
| pr_debug("fb%d: vsync\n", info->node); |
| svga_wcrt_mask(0x56, 0x04, 0x06); |
| svga_wseq_mask(0x01, 0x20, 0x20); |
| break; |
| case FB_BLANK_POWERDOWN: |
| pr_debug("fb%d: sync down\n", info->node); |
| svga_wcrt_mask(0x56, 0x06, 0x06); |
| svga_wseq_mask(0x01, 0x20, 0x20); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| |
| /* Pan the display */ |
| |
| static int s3fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) { |
| |
| unsigned int offset; |
| |
| /* Calculate the offset */ |
| if (var->bits_per_pixel == 0) { |
| offset = (var->yoffset / 16) * (var->xres_virtual / 2) + (var->xoffset / 2); |
| offset = offset >> 2; |
| } else { |
| offset = (var->yoffset * info->fix.line_length) + |
| (var->xoffset * var->bits_per_pixel / 8); |
| offset = offset >> 2; |
| } |
| |
| /* Set the offset */ |
| svga_wcrt_multi(s3_start_address_regs, offset); |
| |
| return 0; |
| } |
| |
| /* Get capabilities of accelerator based on the mode */ |
| |
| static void s3fb_get_caps(struct fb_info *info, struct fb_blit_caps *caps, |
| struct fb_var_screeninfo *var) |
| { |
| if (var->bits_per_pixel == 0) { |
| /* can only support 256 8x16 bitmap */ |
| caps->x = 1 << (8 - 1); |
| caps->y = 1 << (16 - 1); |
| caps->len = 256; |
| } else { |
| caps->x = ~(u32)0; |
| caps->y = ~(u32)0; |
| caps->len = ~(u32)0; |
| } |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Frame buffer operations */ |
| |
| static struct fb_ops s3fb_ops = { |
| .owner = THIS_MODULE, |
| .fb_open = s3fb_open, |
| .fb_release = s3fb_release, |
| .fb_check_var = s3fb_check_var, |
| .fb_set_par = s3fb_set_par, |
| .fb_setcolreg = s3fb_setcolreg, |
| .fb_blank = s3fb_blank, |
| .fb_pan_display = s3fb_pan_display, |
| .fb_fillrect = s3fb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = s3fb_imageblit, |
| .fb_get_caps = s3fb_get_caps, |
| }; |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| static int __devinit s3_identification(int chip) |
| { |
| if (chip == CHIP_XXX_TRIO) { |
| u8 cr30 = vga_rcrt(NULL, 0x30); |
| u8 cr2e = vga_rcrt(NULL, 0x2e); |
| u8 cr2f = vga_rcrt(NULL, 0x2f); |
| |
| if ((cr30 == 0xE0) || (cr30 == 0xE1)) { |
| if (cr2e == 0x10) |
| return CHIP_732_TRIO32; |
| if (cr2e == 0x11) { |
| if (! (cr2f & 0x40)) |
| return CHIP_764_TRIO64; |
| else |
| return CHIP_765_TRIO64VP; |
| } |
| } |
| } |
| |
| if (chip == CHIP_XXX_TRIO64V2_DXGX) { |
| u8 cr6f = vga_rcrt(NULL, 0x6f); |
| |
| if (! (cr6f & 0x01)) |
| return CHIP_775_TRIO64V2_DX; |
| else |
| return CHIP_785_TRIO64V2_GX; |
| } |
| |
| if (chip == CHIP_XXX_VIRGE_DXGX) { |
| u8 cr6f = vga_rcrt(NULL, 0x6f); |
| |
| if (! (cr6f & 0x01)) |
| return CHIP_375_VIRGE_DX; |
| else |
| return CHIP_385_VIRGE_GX; |
| } |
| |
| return CHIP_UNKNOWN; |
| } |
| |
| |
| /* PCI probe */ |
| |
| static int __devinit s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) |
| { |
| struct fb_info *info; |
| struct s3fb_info *par; |
| int rc; |
| u8 regval, cr38, cr39; |
| |
| /* Ignore secondary VGA device because there is no VGA arbitration */ |
| if (! svga_primary_device(dev)) { |
| dev_info(&(dev->dev), "ignoring secondary device\n"); |
| return -ENODEV; |
| } |
| |
| /* Allocate and fill driver data structure */ |
| info = framebuffer_alloc(sizeof(struct s3fb_info), NULL); |
| if (!info) { |
| dev_err(&(dev->dev), "cannot allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| par = info->par; |
| mutex_init(&par->open_lock); |
| |
| info->flags = FBINFO_PARTIAL_PAN_OK | FBINFO_HWACCEL_YPAN; |
| info->fbops = &s3fb_ops; |
| |
| /* Prepare PCI device */ |
| rc = pci_enable_device(dev); |
| if (rc < 0) { |
| dev_err(&(dev->dev), "cannot enable PCI device\n"); |
| goto err_enable_device; |
| } |
| |
| rc = pci_request_regions(dev, "s3fb"); |
| if (rc < 0) { |
| dev_err(&(dev->dev), "cannot reserve framebuffer region\n"); |
| goto err_request_regions; |
| } |
| |
| |
| info->fix.smem_start = pci_resource_start(dev, 0); |
| info->fix.smem_len = pci_resource_len(dev, 0); |
| |
| /* Map physical IO memory address into kernel space */ |
| info->screen_base = pci_iomap(dev, 0, 0); |
| if (! info->screen_base) { |
| rc = -ENOMEM; |
| dev_err(&(dev->dev), "iomap for framebuffer failed\n"); |
| goto err_iomap; |
| } |
| |
| /* Unlock regs */ |
| cr38 = vga_rcrt(NULL, 0x38); |
| cr39 = vga_rcrt(NULL, 0x39); |
| vga_wseq(NULL, 0x08, 0x06); |
| vga_wcrt(NULL, 0x38, 0x48); |
| vga_wcrt(NULL, 0x39, 0xA5); |
| |
| /* Find how many physical memory there is on card */ |
| /* 0x36 register is accessible even if other registers are locked */ |
| regval = vga_rcrt(NULL, 0x36); |
| info->screen_size = s3_memsizes[regval >> 5] << 10; |
| info->fix.smem_len = info->screen_size; |
| |
| par->chip = id->driver_data & CHIP_MASK; |
| par->rev = vga_rcrt(NULL, 0x2f); |
| if (par->chip & CHIP_UNDECIDED_FLAG) |
| par->chip = s3_identification(par->chip); |
| |
| /* Find MCLK frequency */ |
| regval = vga_rseq(NULL, 0x10); |
| par->mclk_freq = ((vga_rseq(NULL, 0x11) + 2) * 14318) / ((regval & 0x1F) + 2); |
| par->mclk_freq = par->mclk_freq >> (regval >> 5); |
| |
| /* Restore locks */ |
| vga_wcrt(NULL, 0x38, cr38); |
| vga_wcrt(NULL, 0x39, cr39); |
| |
| strcpy(info->fix.id, s3_names [par->chip]); |
| info->fix.mmio_start = 0; |
| info->fix.mmio_len = 0; |
| info->fix.type = FB_TYPE_PACKED_PIXELS; |
| info->fix.visual = FB_VISUAL_PSEUDOCOLOR; |
| info->fix.ypanstep = 0; |
| info->fix.accel = FB_ACCEL_NONE; |
| info->pseudo_palette = (void*) (par->pseudo_palette); |
| |
| /* Prepare startup mode */ |
| rc = fb_find_mode(&(info->var), info, mode, NULL, 0, NULL, 8); |
| if (! ((rc == 1) || (rc == 2))) { |
| rc = -EINVAL; |
| dev_err(&(dev->dev), "mode %s not found\n", mode); |
| goto err_find_mode; |
| } |
| |
| rc = fb_alloc_cmap(&info->cmap, 256, 0); |
| if (rc < 0) { |
| dev_err(&(dev->dev), "cannot allocate colormap\n"); |
| goto err_alloc_cmap; |
| } |
| |
| rc = register_framebuffer(info); |
| if (rc < 0) { |
| dev_err(&(dev->dev), "cannot register framebuffer\n"); |
| goto err_reg_fb; |
| } |
| |
| printk(KERN_INFO "fb%d: %s on %s, %d MB RAM, %d MHz MCLK\n", info->node, info->fix.id, |
| pci_name(dev), info->fix.smem_len >> 20, (par->mclk_freq + 500) / 1000); |
| |
| if (par->chip == CHIP_UNKNOWN) |
| printk(KERN_INFO "fb%d: unknown chip, CR2D=%x, CR2E=%x, CRT2F=%x, CRT30=%x\n", |
| info->node, vga_rcrt(NULL, 0x2d), vga_rcrt(NULL, 0x2e), |
| vga_rcrt(NULL, 0x2f), vga_rcrt(NULL, 0x30)); |
| |
| /* Record a reference to the driver data */ |
| pci_set_drvdata(dev, info); |
| |
| #ifdef CONFIG_MTRR |
| if (mtrr) { |
| par->mtrr_reg = -1; |
| par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1); |
| } |
| #endif |
| |
| return 0; |
| |
| /* Error handling */ |
| err_reg_fb: |
| fb_dealloc_cmap(&info->cmap); |
| err_alloc_cmap: |
| err_find_mode: |
| pci_iounmap(dev, info->screen_base); |
| err_iomap: |
| pci_release_regions(dev); |
| err_request_regions: |
| /* pci_disable_device(dev); */ |
| err_enable_device: |
| framebuffer_release(info); |
| return rc; |
| } |
| |
| |
| /* PCI remove */ |
| |
| static void __devexit s3_pci_remove(struct pci_dev *dev) |
| { |
| struct fb_info *info = pci_get_drvdata(dev); |
| |
| if (info) { |
| |
| #ifdef CONFIG_MTRR |
| struct s3fb_info *par = info->par; |
| |
| if (par->mtrr_reg >= 0) { |
| mtrr_del(par->mtrr_reg, 0, 0); |
| par->mtrr_reg = -1; |
| } |
| #endif |
| |
| unregister_framebuffer(info); |
| fb_dealloc_cmap(&info->cmap); |
| |
| pci_iounmap(dev, info->screen_base); |
| pci_release_regions(dev); |
| /* pci_disable_device(dev); */ |
| |
| pci_set_drvdata(dev, NULL); |
| framebuffer_release(info); |
| } |
| } |
| |
| /* PCI suspend */ |
| |
| static int s3_pci_suspend(struct pci_dev* dev, pm_message_t state) |
| { |
| struct fb_info *info = pci_get_drvdata(dev); |
| struct s3fb_info *par = info->par; |
| |
| dev_info(&(dev->dev), "suspend\n"); |
| |
| acquire_console_sem(); |
| mutex_lock(&(par->open_lock)); |
| |
| if ((state.event == PM_EVENT_FREEZE) || (par->ref_count == 0)) { |
| mutex_unlock(&(par->open_lock)); |
| release_console_sem(); |
| return 0; |
| } |
| |
| fb_set_suspend(info, 1); |
| |
| pci_save_state(dev); |
| pci_disable_device(dev); |
| pci_set_power_state(dev, pci_choose_state(dev, state)); |
| |
| mutex_unlock(&(par->open_lock)); |
| release_console_sem(); |
| |
| return 0; |
| } |
| |
| |
| /* PCI resume */ |
| |
| static int s3_pci_resume(struct pci_dev* dev) |
| { |
| struct fb_info *info = pci_get_drvdata(dev); |
| struct s3fb_info *par = info->par; |
| int err; |
| |
| dev_info(&(dev->dev), "resume\n"); |
| |
| acquire_console_sem(); |
| mutex_lock(&(par->open_lock)); |
| |
| if (par->ref_count == 0) { |
| mutex_unlock(&(par->open_lock)); |
| release_console_sem(); |
| return 0; |
| } |
| |
| pci_set_power_state(dev, PCI_D0); |
| pci_restore_state(dev); |
| err = pci_enable_device(dev); |
| if (err) { |
| mutex_unlock(&(par->open_lock)); |
| release_console_sem(); |
| dev_err(&(dev->dev), "error %d enabling device for resume\n", err); |
| return err; |
| } |
| pci_set_master(dev); |
| |
| s3fb_set_par(info); |
| fb_set_suspend(info, 0); |
| |
| mutex_unlock(&(par->open_lock)); |
| release_console_sem(); |
| |
| return 0; |
| } |
| |
| |
| /* List of boards that we are trying to support */ |
| |
| static struct pci_device_id s3_devices[] __devinitdata = { |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8810), .driver_data = CHIP_XXX_TRIO}, |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8811), .driver_data = CHIP_XXX_TRIO}, |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8812), .driver_data = CHIP_M65_AURORA64VP}, |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8814), .driver_data = CHIP_767_TRIO64UVP}, |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8901), .driver_data = CHIP_XXX_TRIO64V2_DXGX}, |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8902), .driver_data = CHIP_551_PLATO_PX}, |
| |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x5631), .driver_data = CHIP_325_VIRGE}, |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x883D), .driver_data = CHIP_988_VIRGE_VX}, |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A01), .driver_data = CHIP_XXX_VIRGE_DXGX}, |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A10), .driver_data = CHIP_356_VIRGE_GX2}, |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A11), .driver_data = CHIP_357_VIRGE_GX2P}, |
| {PCI_DEVICE(PCI_VENDOR_ID_S3, 0x8A12), .driver_data = CHIP_359_VIRGE_GX2P}, |
| |
| {0, 0, 0, 0, 0, 0, 0} |
| }; |
| |
| |
| MODULE_DEVICE_TABLE(pci, s3_devices); |
| |
| static struct pci_driver s3fb_pci_driver = { |
| .name = "s3fb", |
| .id_table = s3_devices, |
| .probe = s3_pci_probe, |
| .remove = __devexit_p(s3_pci_remove), |
| .suspend = s3_pci_suspend, |
| .resume = s3_pci_resume, |
| }; |
| |
| /* Parse user speficied options */ |
| |
| #ifndef MODULE |
| static int __init s3fb_setup(char *options) |
| { |
| char *opt; |
| |
| if (!options || !*options) |
| return 0; |
| |
| while ((opt = strsep(&options, ",")) != NULL) { |
| |
| if (!*opt) |
| continue; |
| #ifdef CONFIG_MTRR |
| else if (!strncmp(opt, "mtrr:", 5)) |
| mtrr = simple_strtoul(opt + 5, NULL, 0); |
| #endif |
| else if (!strncmp(opt, "fasttext:", 9)) |
| fasttext = simple_strtoul(opt + 9, NULL, 0); |
| else |
| mode = opt; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| /* Cleanup */ |
| |
| static void __exit s3fb_cleanup(void) |
| { |
| pr_debug("s3fb: cleaning up\n"); |
| pci_unregister_driver(&s3fb_pci_driver); |
| } |
| |
| /* Driver Initialisation */ |
| |
| static int __init s3fb_init(void) |
| { |
| |
| #ifndef MODULE |
| char *option = NULL; |
| |
| if (fb_get_options("s3fb", &option)) |
| return -ENODEV; |
| s3fb_setup(option); |
| #endif |
| |
| pr_debug("s3fb: initializing\n"); |
| return pci_register_driver(&s3fb_pci_driver); |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Modularization */ |
| |
| module_init(s3fb_init); |
| module_exit(s3fb_cleanup); |