| /* |
| * Driver for the NVIDIA Tegra pinmux |
| * |
| * Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| */ |
| |
| #ifndef __PINMUX_TEGRA_H__ |
| #define __PINMUX_TEGRA_H__ |
| |
| struct tegra_pmx { |
| struct device *dev; |
| struct pinctrl_dev *pctl; |
| |
| const struct tegra_pinctrl_soc_data *soc; |
| const char **group_pins; |
| |
| int nbanks; |
| void __iomem **regs; |
| }; |
| |
| enum tegra_pinconf_param { |
| /* argument: tegra_pinconf_pull */ |
| TEGRA_PINCONF_PARAM_PULL, |
| /* argument: tegra_pinconf_tristate */ |
| TEGRA_PINCONF_PARAM_TRISTATE, |
| /* argument: Boolean */ |
| TEGRA_PINCONF_PARAM_ENABLE_INPUT, |
| /* argument: Boolean */ |
| TEGRA_PINCONF_PARAM_OPEN_DRAIN, |
| /* argument: Boolean */ |
| TEGRA_PINCONF_PARAM_LOCK, |
| /* argument: Boolean */ |
| TEGRA_PINCONF_PARAM_IORESET, |
| /* argument: Boolean */ |
| TEGRA_PINCONF_PARAM_RCV_SEL, |
| /* argument: Boolean */ |
| TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, |
| /* argument: Boolean */ |
| TEGRA_PINCONF_PARAM_SCHMITT, |
| /* argument: Boolean */ |
| TEGRA_PINCONF_PARAM_LOW_POWER_MODE, |
| /* argument: Integer, range is HW-dependant */ |
| TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH, |
| /* argument: Integer, range is HW-dependant */ |
| TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH, |
| /* argument: Integer, range is HW-dependant */ |
| TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, |
| /* argument: Integer, range is HW-dependant */ |
| TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, |
| /* argument: Integer, range is HW-dependant */ |
| TEGRA_PINCONF_PARAM_DRIVE_TYPE, |
| }; |
| |
| enum tegra_pinconf_pull { |
| TEGRA_PINCONFIG_PULL_NONE, |
| TEGRA_PINCONFIG_PULL_DOWN, |
| TEGRA_PINCONFIG_PULL_UP, |
| }; |
| |
| enum tegra_pinconf_tristate { |
| TEGRA_PINCONFIG_DRIVEN, |
| TEGRA_PINCONFIG_TRISTATE, |
| }; |
| |
| #define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_)) |
| #define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16) |
| #define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff) |
| |
| /** |
| * struct tegra_function - Tegra pinctrl mux function |
| * @name: The name of the function, exported to pinctrl core. |
| * @groups: An array of pin groups that may select this function. |
| * @ngroups: The number of entries in @groups. |
| */ |
| struct tegra_function { |
| const char *name; |
| const char **groups; |
| unsigned ngroups; |
| }; |
| |
| /** |
| * struct tegra_pingroup - Tegra pin group |
| * @name The name of the pin group. |
| * @pins An array of pin IDs included in this pin group. |
| * @npins The number of entries in @pins. |
| * @funcs The mux functions which can be muxed onto this group. |
| * @mux_reg: Mux register offset. |
| * This register contains the mux, einput, odrain, lock, |
| * ioreset, rcv_sel parameters. |
| * @mux_bank: Mux register bank. |
| * @mux_bit: Mux register bit. |
| * @pupd_reg: Pull-up/down register offset. |
| * @pupd_bank: Pull-up/down register bank. |
| * @pupd_bit: Pull-up/down register bit. |
| * @tri_reg: Tri-state register offset. |
| * @tri_bank: Tri-state register bank. |
| * @tri_bit: Tri-state register bit. |
| * @parked_bit: Parked register bit. -1 if unsupported. |
| * @einput_bit: Enable-input register bit. |
| * @odrain_bit: Open-drain register bit. |
| * @lock_bit: Lock register bit. |
| * @ioreset_bit: IO reset register bit. |
| * @rcv_sel_bit: Receiver select bit. |
| * @drv_reg: Drive fields register offset. |
| * This register contains hsm, schmitt, lpmd, drvdn, |
| * drvup, slwr, slwf, and drvtype parameters. |
| * @drv_bank: Drive fields register bank. |
| * @hsm_bit: High Speed Mode register bit. |
| * @schmitt_bit: Scmitt register bit. |
| * @lpmd_bit: Low Power Mode register bit. |
| * @drvdn_bit: Drive Down register bit. |
| * @drvdn_width: Drive Down field width. |
| * @drvup_bit: Drive Up register bit. |
| * @drvup_width: Drive Up field width. |
| * @slwr_bit: Slew Rising register bit. |
| * @slwr_width: Slew Rising field width. |
| * @slwf_bit: Slew Falling register bit. |
| * @slwf_width: Slew Falling field width. |
| * @drvtype_bit: Drive type register bit. |
| * |
| * -1 in a *_reg field means that feature is unsupported for this group. |
| * *_bank and *_reg values are irrelevant when *_reg is -1. |
| * When *_reg is valid, *_bit may be -1 to indicate an unsupported feature. |
| * |
| * A representation of a group of pins (possibly just one pin) in the Tegra |
| * pin controller. Each group allows some parameter or parameters to be |
| * configured. The most common is mux function selection. Many others exist |
| * such as pull-up/down, tri-state, etc. Tegra's pin controller is complex; |
| * certain groups may only support configuring certain parameters, hence |
| * each parameter is optional. |
| */ |
| struct tegra_pingroup { |
| const char *name; |
| const unsigned *pins; |
| u8 npins; |
| u8 funcs[4]; |
| s16 mux_reg; |
| s16 pupd_reg; |
| s16 tri_reg; |
| s16 drv_reg; |
| u32 mux_bank:2; |
| u32 pupd_bank:2; |
| u32 tri_bank:2; |
| u32 drv_bank:2; |
| s32 mux_bit:6; |
| s32 pupd_bit:6; |
| s32 tri_bit:6; |
| s32 parked_bit:6; |
| s32 einput_bit:6; |
| s32 odrain_bit:6; |
| s32 lock_bit:6; |
| s32 ioreset_bit:6; |
| s32 rcv_sel_bit:6; |
| s32 hsm_bit:6; |
| s32 schmitt_bit:6; |
| s32 lpmd_bit:6; |
| s32 drvdn_bit:6; |
| s32 drvup_bit:6; |
| s32 slwr_bit:6; |
| s32 slwf_bit:6; |
| s32 drvtype_bit:6; |
| s32 drvdn_width:6; |
| s32 drvup_width:6; |
| s32 slwr_width:6; |
| s32 slwf_width:6; |
| }; |
| |
| /** |
| * struct tegra_pinctrl_soc_data - Tegra pin controller driver configuration |
| * @ngpios: The number of GPIO pins the pin controller HW affects. |
| * @pins: An array describing all pins the pin controller affects. |
| * All pins which are also GPIOs must be listed first within the |
| * array, and be numbered identically to the GPIO controller's |
| * numbering. |
| * @npins: The numbmer of entries in @pins. |
| * @functions: An array describing all mux functions the SoC supports. |
| * @nfunctions: The numbmer of entries in @functions. |
| * @groups: An array describing all pin groups the pin SoC supports. |
| * @ngroups: The numbmer of entries in @groups. |
| */ |
| struct tegra_pinctrl_soc_data { |
| unsigned ngpios; |
| const char *gpio_compatible; |
| const struct pinctrl_pin_desc *pins; |
| unsigned npins; |
| struct tegra_function *functions; |
| unsigned nfunctions; |
| const struct tegra_pingroup *groups; |
| unsigned ngroups; |
| bool hsm_in_mux; |
| bool schmitt_in_mux; |
| bool drvtype_in_mux; |
| }; |
| |
| int tegra_pinctrl_probe(struct platform_device *pdev, |
| const struct tegra_pinctrl_soc_data *soc_data); |
| #endif |