| /* |
| * Generic Power Management Routine |
| * |
| * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License. |
| */ |
| #include <linux/suspend.h> |
| #include <linux/delay.h> |
| #include <linux/gfp.h> |
| #include <asm/freq.h> |
| #include <asm/io.h> |
| #include <asm/watchdog.h> |
| #include <asm/pm.h> |
| |
| #define INTR_OFFSET 0x600 |
| |
| #define STBCR 0xffffff82 |
| #define STBCR2 0xffffff88 |
| |
| #define STBCR_STBY 0x80 |
| #define STBCR_MSTP2 0x04 |
| |
| #define MCR 0xffffff68 |
| #define RTCNT 0xffffff70 |
| |
| #define MCR_RMODE 2 |
| #define MCR_RFSH 4 |
| |
| void pm_enter(void) |
| { |
| u8 stbcr, csr; |
| u16 frqcr, mcr; |
| u32 vbr_new, vbr_old; |
| |
| set_bl_bit(); |
| |
| /* set wdt */ |
| csr = sh_wdt_read_csr(); |
| csr &= ~WTCSR_TME; |
| csr |= WTCSR_CKS_4096; |
| sh_wdt_write_csr(csr); |
| csr = sh_wdt_read_csr(); |
| sh_wdt_write_cnt(0); |
| |
| /* disable PLL1 */ |
| frqcr = ctrl_inw(FRQCR); |
| frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY); |
| ctrl_outw(frqcr, FRQCR); |
| |
| /* enable standby */ |
| stbcr = ctrl_inb(STBCR); |
| ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR); |
| |
| /* set self-refresh */ |
| mcr = ctrl_inw(MCR); |
| ctrl_outw(mcr & ~MCR_RFSH, MCR); |
| |
| /* set interrupt handler */ |
| asm volatile("stc vbr, %0" : "=r" (vbr_old)); |
| vbr_new = get_zeroed_page(GFP_ATOMIC); |
| udelay(50); |
| memcpy((void*)(vbr_new + INTR_OFFSET), |
| &wakeup_start, &wakeup_end - &wakeup_start); |
| asm volatile("ldc %0, vbr" : : "r" (vbr_new)); |
| |
| ctrl_outw(0, RTCNT); |
| ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR); |
| |
| cpu_sleep(); |
| |
| asm volatile("ldc %0, vbr" : : "r" (vbr_old)); |
| |
| free_page(vbr_new); |
| |
| /* enable PLL1 */ |
| frqcr = ctrl_inw(FRQCR); |
| frqcr |= FRQCR_PSTBY; |
| ctrl_outw(frqcr, FRQCR); |
| udelay(50); |
| frqcr |= FRQCR_PLLEN; |
| ctrl_outw(frqcr, FRQCR); |
| |
| ctrl_outb(stbcr, STBCR); |
| |
| clear_bl_bit(); |
| } |