blob: 2a5d3daed0e1c02c18f34c402b83574b8144b619 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/qcom,sm8450-dpu.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm SM8450 Display DPU
maintainers:
- Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
$ref: /schemas/display/msm/dpu-common.yaml#
properties:
compatible:
const: qcom,sm8450-dpu
reg:
items:
- description: Address offset and size for mdp register set
- description: Address offset and size for vbif register set
reg-names:
items:
- const: mdp
- const: vbif
clocks:
items:
- description: Display hf axi
- description: Display sf axi
- description: Display ahb
- description: Display lut
- description: Display core
- description: Display vsync
clock-names:
items:
- const: bus
- const: nrt_bus
- const: iface
- const: lut
- const: core
- const: vsync
required:
- compatible
- reg
- reg-names
- clocks
- clock-names
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,sm8450-dispcc.h>
#include <dt-bindings/clock/qcom,gcc-sm8450.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interconnect/qcom,sm8450.h>
#include <dt-bindings/power/qcom,rpmhpd.h>
display-controller@ae01000 {
compatible = "qcom,sm8450-dpu";
reg = <0x0ae01000 0x8f000>,
<0x0aeb0000 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
<&gcc GCC_DISP_SF_AXI_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "bus",
"nrt_bus",
"iface",
"lut",
"core",
"vsync";
assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
assigned-clock-rates = <19200000>;
operating-points-v2 = <&mdp_opp_table>;
power-domains = <&rpmhpd RPMHPD_MMCX>;
interrupt-parent = <&mdss>;
interrupts = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
port@1 {
reg = <1>;
dpu_intf2_out: endpoint {
remote-endpoint = <&dsi1_in>;
};
};
};
mdp_opp_table: opp-table {
compatible = "operating-points-v2";
opp-172000000{
opp-hz = /bits/ 64 <172000000>;
required-opps = <&rpmhpd_opp_low_svs_d1>;
};
opp-200000000 {
opp-hz = /bits/ 64 <200000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-325000000 {
opp-hz = /bits/ 64 <325000000>;
required-opps = <&rpmhpd_opp_svs>;
};
opp-375000000 {
opp-hz = /bits/ 64 <375000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
};
opp-500000000 {
opp-hz = /bits/ 64 <500000000>;
required-opps = <&rpmhpd_opp_nom>;
};
};
};
...