| # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/hwmon/lm75.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: LM75 hwmon sensor |
| |
| maintainers: |
| - Jean Delvare <jdelvare@suse.com> |
| - Guenter Roeck <linux@roeck-us.net> |
| |
| properties: |
| compatible: |
| enum: |
| - adi,adt75 |
| - ams,as6200 |
| - atmel,at30ts74 |
| - dallas,ds1775 |
| - dallas,ds75 |
| - dallas,ds7505 |
| - gmt,g751 |
| - national,lm75 |
| - national,lm75a |
| - national,lm75b |
| - maxim,max6625 |
| - maxim,max6626 |
| - maxim,max31725 |
| - maxim,max31726 |
| - maxim,mcp980x |
| - nxp,pct2075 |
| - st,stds75 |
| - st,stlm75 |
| - microchip,tcn75 |
| - ti,tmp1075 |
| - ti,tmp100 |
| - ti,tmp101 |
| - ti,tmp105 |
| - ti,tmp112 |
| - ti,tmp175 |
| - ti,tmp275 |
| - ti,tmp75 |
| - ti,tmp75b |
| - ti,tmp75c |
| |
| reg: |
| maxItems: 1 |
| |
| vs-supply: |
| description: phandle to the regulator that provides the +VS supply |
| |
| interrupts: |
| maxItems: 1 |
| |
| required: |
| - compatible |
| - reg |
| |
| allOf: |
| - $ref: hwmon-common.yaml# |
| - if: |
| not: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - ams,as6200 |
| - ti,tmp100 |
| - ti,tmp101 |
| - ti,tmp112 |
| then: |
| properties: |
| interrupts: false |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| sensor@48 { |
| compatible = "st,stlm75"; |
| reg = <0x48>; |
| vs-supply = <&vs>; |
| }; |
| }; |
| - | |
| #include <dt-bindings/interrupt-controller/irq.h> |
| i2c { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| temperature-sensor@48 { |
| compatible = "ams,as6200"; |
| reg = <0x48>; |
| vs-supply = <&vs>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <17 IRQ_TYPE_EDGE_BOTH>; |
| }; |
| }; |
