blob: 3ce59d4d065f5d657404f9709df40beee3ae78a3 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/adc/adi,ad7768-1.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Analog Devices AD7768-1 ADC device driver
maintainers:
- Michael Hennerich <michael.hennerich@analog.com>
description: |
Datasheet at:
https://www.analog.com/media/en/technical-documentation/data-sheets/ad7768-1.pdf
properties:
compatible:
const: adi,ad7768-1
reg:
maxItems: 1
clocks:
maxItems: 1
clock-names:
const: mclk
interrupts:
maxItems: 1
'#address-cells':
const: 1
'#size-cells':
const: 0
vref-supply:
description:
ADC reference voltage supply
adi,sync-in-gpios:
maxItems: 1
description:
Enables synchronization of multiple devices that require simultaneous
sampling. A pulse is always required if the configuration is changed
in any way, for example if the filter decimation rate changes.
As the line is active low, it should be marked GPIO_ACTIVE_LOW.
reset-gpios:
maxItems: 1
spi-cpol: true
spi-cpha: true
"#io-channel-cells":
const: 1
required:
- compatible
- reg
- clocks
- clock-names
- vref-supply
- spi-cpol
- spi-cpha
- adi,sync-in-gpios
patternProperties:
"^channel@([0-9]|1[0-5])$":
type: object
description: |
Represents the external channels which are connected to the device.
properties:
reg:
maxItems: 1
description: |
The channel number.
label:
description: |
Unique name to identify which channel this is.
required:
- reg
additionalProperties: false
allOf:
- $ref: /schemas/spi/spi-peripheral-props.yaml#
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
spi {
#address-cells = <1>;
#size-cells = <0>;
adc@0 {
compatible = "adi,ad7768-1";
reg = <0>;
spi-max-frequency = <2000000>;
spi-cpol;
spi-cpha;
vref-supply = <&adc_vref>;
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
interrupt-parent = <&gpio>;
adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
clocks = <&ad7768_mclk>;
clock-names = "mclk";
#address-cells = <1>;
#size-cells = <0>;
channel@0 {
reg = <0>;
label = "channel_0";
};
};
};
...