blob: f3c3f64fd012b19aa852cb0734ab85e8a24dfd07 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/maxim,max8998.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Maxim MAX8998, National/TI LP3974 Power Management IC
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
description:
The Maxim MAX8998 is a Power Management IC which includes voltage/current
regulators, real time clock, battery charging controller and several other
sub-blocks. It is interfaced using an I2C interface. Each sub-block is
addressed by the host system using different i2c slave address.
properties:
compatible:
enum:
- maxim,max8998
- national,lp3974
- ti,lp3974
reg:
maxItems: 1
interrupts:
minItems: 1
items:
- description: Main interrupt
- description: Power-on/-off interrupt
max8998,pmic-buck1-dvs-gpios:
maxItems: 2
description:
Two host gpios used for buck1 DVS.
max8998,pmic-buck2-dvs-gpio:
maxItems: 1
description:
Host gpio used for buck2 DVS.
max8998,pmic-buck1-default-dvs-idx:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2, 3]
default: 0
description:
Default voltage setting selected from the possible 4 options selectable
by the DVS gpios.
max8998,pmic-buck2-default-dvs-idx:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1]
default: 0
description:
Default voltage setting selected from the possible 2 options selectable
by the DVS GPIOs.
max8998,pmic-buck-voltage-lock:
type: boolean
description:
If present, disallows changing of preprogrammed buck DVS voltages.
max8998,pmic-buck1-dvs-voltage:
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 4
description:
Four voltage values in microvolts for buck1 regulator that can be
selected using DVS GPIO.
max8998,pmic-buck2-dvs-voltage:
$ref: /schemas/types.yaml#/definitions/uint32-array
maxItems: 2
description:
Two voltage values in microvolts for buck2 regulator that can be
selected using DVS GPIO.
regulators:
type: object
additionalProperties: false
properties:
CHARGER:
type: object
$ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
description:
CHARGER is main battery charger current control, wrongly represented
as regulator.
properties:
regulator-min-microamp:
minimum: 90000
maximum: 800000
regulator-max-microamp:
minimum: 90000
maximum: 800000
regulator-min-microvolt: false
regulator-max-microvolt: false
required:
- regulator-name
patternProperties:
"^(LDO([2-9]|1[0-7])|BUCK[1-4])$":
type: object
$ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
required:
- regulator-name
"^(EN32KHz-AP|EN32KHz-CP|ENVICHG|ESAFEOUT[12])$":
type: object
$ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
description: |
EN32KHz-AP and EN32KHz-CP are 32768 Hz clocks, wrongly represented as
regulators.
ENVICHG is a Battery Charging Current Monitor Output.
properties:
regulator-min-microvolt: false
regulator-max-microvolt: false
required:
- regulator-name
dependencies:
max8998,pmic-buck1-dvs-gpios: [ "max8998,pmic-buck1-dvs-voltage" ]
max8998,pmic-buck2-dvs-gpio: [ "max8998,pmic-buck2-dvs-voltage" ]
required:
- compatible
- reg
- regulators
additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic@66 {
compatible = "national,lp3974";
reg = <0x66>;
interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
<&gpx2 7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&lp3974_irq>;
max8998,pmic-buck1-default-dvs-idx = <0>;
max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
<&gpx0 6 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
<1100000>, <1000000>;
max8998,pmic-buck2-default-dvs-idx = <0>;
max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
regulators {
LDO2 {
regulator-name = "VALIVE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
LDO3 {
regulator-name = "VUSB+MIPI_1.1V";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
LDO4 {
regulator-name = "VADC_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
LDO5 {
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
LDO6 {
regulator-name = "LDO6";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
};
LDO7 {
regulator-name = "VLCD+VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
LDO8 {
regulator-name = "VUSB+VDAC_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
LDO9 {
regulator-name = "VCC_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
LDO10 {
regulator-name = "VPLL_1.1V";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
LDO11 {
regulator-name = "CAM_AF_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
LDO12 {
regulator-name = "PS_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
LDO13 {
regulator-name = "VHIC_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
LDO14 {
regulator-name = "CAM_I_HOST_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
LDO15 {
regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
LDO16 {
regulator-name = "CAM_S_ANA_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
LDO17 {
regulator-name = "VCC_3.0V_LCD";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
BUCK1 {
regulator-name = "VINT_1.1V";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
BUCK2 {
regulator-name = "VG3D_1.1V";
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
};
BUCK3 {
regulator-name = "VCC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
BUCK4 {
regulator-name = "VMEM_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
EN32KHz-AP {
regulator-name = "32KHz AP";
regulator-always-on;
};
EN32KHz-CP {
regulator-name = "32KHz CP";
};
ENVICHG {
regulator-name = "VICHG";
};
ESAFEOUT1 {
regulator-name = "SAFEOUT1";
};
ESAFEOUT2 {
regulator-name = "SAFEOUT2";
regulator-boot-on;
};
};
};
};