blob: 839c0521f1e5303c612a209c785aff87d3ec8414 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: RK809 Power Management Integrated Circuit
maintainers:
- Chris Zhong <zyw@rock-chips.com>
- Zhang Qing <zhangqing@rock-chips.com>
description: |
Rockchip RK809 series PMIC. This device consists of an i2c controlled MFD
that includes regulators, an RTC, and power button.
properties:
compatible:
enum:
- rockchip,rk809
reg:
maxItems: 1
interrupts:
maxItems: 1
'#clock-cells':
description: |
See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
minimum: 0
maximum: 1
clock-output-names:
description:
From common clock binding to override the default output clock name.
rockchip,system-power-controller:
type: boolean
deprecated: true
description:
Telling whether or not this PMIC is controlling the system power.
system-power-controller: true
wakeup-source:
type: boolean
description:
Device can be used as a wakeup source.
vcc1-supply:
description:
The input supply for DCDC_REG1.
vcc2-supply:
description:
The input supply for DCDC_REG2.
vcc3-supply:
description:
The input supply for DCDC_REG3.
vcc4-supply:
description:
The input supply for DCDC_REG4.
vcc5-supply:
description:
The input supply for LDO_REG1, LDO_REG2, and LDO_REG3.
vcc6-supply:
description:
The input supply for LDO_REG4, LDO_REG5, and LDO_REG6.
vcc7-supply:
description:
The input supply for LDO_REG7, LDO_REG8, and LDO_REG9.
vcc8-supply:
description:
The input supply for SWITCH_REG1.
vcc9-supply:
description:
The input supply for DCDC_REG5 and SWITCH_REG2.
regulators:
type: object
patternProperties:
"^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$":
type: object
$ref: /schemas/regulator/regulator.yaml#
unevaluatedProperties: false
unevaluatedProperties: false
allOf:
- if:
properties:
'#clock-cells':
const: 0
then:
properties:
clock-output-names:
maxItems: 1
else:
properties:
clock-output-names:
maxItems: 2
required:
- compatible
- reg
- interrupts
- "#clock-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
rk808: pmic@1b {
compatible = "rockchip,rk808";
reg = <0x1b>;
#clock-cells = <1>;
clock-output-names = "xin32k", "rk808-clkout2";
interrupt-parent = <&gpio3>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int_l_pin>;
rockchip,system-power-controller;
wakeup-source;
vcc1-supply = <&vcc_sysin>;
vcc2-supply = <&vcc_sysin>;
vcc3-supply = <&vcc_sysin>;
vcc4-supply = <&vcc_sysin>;
vcc6-supply = <&vcc_sysin>;
vcc7-supply = <&vcc_sysin>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc_sysin>;
vcc10-supply = <&vcc_sysin>;
vcc11-supply = <&vcc_sysin>;
vcc12-supply = <&vcc3v3_sys>;
regulators {
vdd_center: DCDC_REG1 {
regulator-name = "vdd_center";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_l: DCDC_REG2 {
regulator-name = "vdd_cpu_l";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
regulator-name = "vcc_ddr";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_1v8: vcc_wl: DCDC_REG4 {
regulator-name = "vcc_1v8";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc1v8_pmupll: LDO_REG3 {
regulator-name = "vcc1v8_pmupll";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcc_sdio: LDO_REG4 {
regulator-name = "vcc_sdio";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcca3v0_codec: LDO_REG5 {
regulator-name = "vcca3v0_codec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v5: LDO_REG6 {
regulator-name = "vcc_1v5";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1500000>;
};
};
vcca1v8_codec: LDO_REG7 {
regulator-name = "vcca1v8_codec";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v0: LDO_REG8 {
regulator-name = "vcc_3v0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3000000>;
};
};
vcc3v3_s3: SWITCH_REG1 {
regulator-name = "vcc3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc3v3_s0: SWITCH_REG2 {
regulator-name = "vcc3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};