blob: 63cd743a30e002ab2f7cf4ce7030b0a71609a739 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/nvidia,tegra20-pinmux.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NVIDIA Tegra20 Pinmux Controller
maintainers:
- Thierry Reding <thierry.reding@gmail.com>
- Jon Hunter <jonathanh@nvidia.com>
properties:
compatible:
const: nvidia,tegra20-pinmux
reg:
items:
- description: tri-state registers
- description: mux register
- description: pull-up/down registers
- description: pad control registers
patternProperties:
"^pinmux(-[a-z0-9-_]+)?$":
type: object
# pin groups
additionalProperties:
$ref: nvidia,tegra-pinmux-common.yaml
additionalProperties: false
properties:
nvidia,pins:
items:
enum: [ ata, atb, atc, atd, ate, cdev1, cdev2, crtp, csus, dap1,
dap2, dap3, dap4, ddc, dta, dtb, dtc, dtd, dte, dtf, gma,
gmb, gmc, gmd, gme, gpu, gpu7, gpv, hdint, i2cp, irrx,
irtx, kbca, kbcb, kbcc, kbcd, kbce, kbcf, lcsn, ld0, ld1,
ld2, ld3, ld4, ld5, ld6, ld7, ld8, ld9, ld10, ld11, ld12,
ld13, ld14, ld15, ld16, ld17, ldc, ldi, lhp0, lhp1, lhp2,
lhs, lm0, lm1, lpp, lpw0, lpw1, lpw2, lsc0, lsc1, lsck,
lsda, lsdi, lspi, lvp0, lvp1, lvs, owc, pmc, pta, rm, sdb,
sdc, sdd, sdio1, slxa, slxc, slxd, slxk, spdi, spdo, spia,
spib, spic, spid, spie, spif, spig, spih, uaa, uab, uac,
uad, uca, ucb, uda,
# tristate groups
ck32, ddrc, pmca, pmcb, pmcc, pmcd, pmce, xm2c, xm2d, ls,
lc, ld17_0, ld19_18, ld21_20, ld23_22,
# drive groups
drive_ao1, drive_ao2, drive_at1, drive_at2, drive_cdev1,
drive_cdev2, drive_csus, drive_dap1, drive_dap2,
drive_dap3, drive_dap4, drive_dbg, drive_lcd1, drive_lcd2,
drive_sdmmc2, drive_sdmmc3, drive_spi, drive_uaa,
drive_uab, drive_uart2, drive_uart3, drive_vi1, drive_vi2,
drive_xm2a, drive_xm2c, drive_xm2d, drive_xm2clk,
drive_sdio1, drive_crt, drive_ddc, drive_gma, drive_gmb,
drive_gmc, drive_gmd, drive_gme, drive_owr, drive_uda ]
nvidia,function:
enum: [ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4,
dap5, displaya, displayb, emc_test0_dll, emc_test1_dll, gmi,
gmi_int, hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio,
mipi_hs, nand, osc, owr, pcie, plla_out, pllc_out1,
pllm_out1, pllp_out2, pllp_out3, pllp_out4, pwm, pwr_intr,
pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck, sdio1, sdio2,
sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt, spi3,
spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
vi, vi_sensor_clk, xio ]
nvidia,pull: true
nvidia,tristate: true
nvidia,schmitt: true
nvidia,pull-down-strength: true
nvidia,pull-up-strength: true
nvidia,high-speed-mode: true
nvidia,low-power-mode: true
nvidia,slew-rate-rising: true
nvidia,slew-rate-falling: true
required:
- nvidia,pins
additionalProperties: false
required:
- compatible
- reg
examples:
- |
#include <dt-bindings/clock/tegra20-car.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
pinctrl@70000000 {
compatible = "nvidia,tegra20-pinmux";
reg = <0x70000014 0x10>, /* Tri-state registers */
<0x70000080 0x20>, /* Mux registers */
<0x700000a0 0x14>, /* Pull-up/down registers */
<0x70000868 0xa8>; /* Pad control registers */
pinmux {
atb {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
};
};
...