blob: e571cd64418f279868dc724b2ec41661a6056f15 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5332-tlmm.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm IPQ5332 TLMM pin controller
maintainers:
- Bjorn Andersson <andersson@kernel.org>
- Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
description: |
Top Level Mode Multiplexer pin controller in Qualcomm IPQ5332 SoC.
allOf:
- $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
properties:
compatible:
const: qcom,ipq5332-tlmm
reg:
maxItems: 1
interrupts:
maxItems: 1
gpio-reserved-ranges:
minItems: 1
maxItems: 27
gpio-line-names:
maxItems: 53
patternProperties:
"-state$":
oneOf:
- $ref: "#/$defs/qcom-ipq5332-tlmm-state"
- patternProperties:
"-pins$":
$ref: "#/$defs/qcom-ipq5332-tlmm-state"
additionalProperties: false
$defs:
qcom-ipq5332-tlmm-state:
type: object
description:
Pinctrl node's client devices use subnodes for desired pin configuration.
Client device subnodes use below standard properties.
$ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
unevaluatedProperties: false
properties:
pins:
description:
List of gpio pins affected by the properties specified in this
subnode.
items:
pattern: "^gpio([0-9]|[1-4][0-9]|5[0-2])$"
minItems: 1
maxItems: 36
function:
description:
Specify the alternative function to be configured for the specified
pins.
enum: [ atest_char, atest_char0, atest_char1, atest_char2, atest_char3,
atest_tic, audio_pri, audio_pri0, audio_pri1, audio_sec,
audio_sec0, audio_sec1, blsp0_i2c, blsp0_spi, blsp0_uart0,
blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
blsp2_spi, blsp2_spi0, blsp2_spi1, core_voltage, cri_trng0,
cri_trng1, cri_trng2, cri_trng3, cxc_clk, cxc_data, dbg_out,
gcc_plltest, gcc_tlmm, gpio, lock_det, mac0, mac1, mdc0, mdc1,
mdio0, mdio1, pc, pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake,
pcie2_clk, pcie2_wake, pll_test, prng_rosc0, prng_rosc1,
prng_rosc2, prng_rosc3, pta, pwm0, pwm1, pwm2, pwm3,
qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, qdss_cti_trig_in_b0,
qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_traceclk_b,
qdss_tracectl_a, qdss_tracectl_b, qdss_tracedata_a,
qdss_tracedata_b, qspi_data, qspi_clk, qspi_cs, resout, rx0,
rx1, sdc_data, sdc_clk, sdc_cmd, tsens_max, wci_txd, wci_rxd,
wsi_clk, wsi_clk3, wsi_data, wsi_data3, wsis_reset, xfem ]
required:
- pins
required:
- compatible
- reg
unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
tlmm: pinctrl@1000000 {
compatible = "qcom,ipq5332-tlmm";
reg = <0x01000000 0x300000>;
gpio-controller;
#gpio-cells = <0x2>;
gpio-ranges = <&tlmm 0 0 53>;
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <0x2>;
serial0-state {
pins = "gpio18", "gpio19";
function = "blsp0_uart0";
drive-strength = <8>;
bias-pull-up;
};
};