| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * NCI based driver for Samsung S3FWRN5 NFC chip |
| * |
| * Copyright (C) 2015 Samsung Electrnoics |
| * Robert Baldyga <r.baldyga@samsung.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <net/nfc/nci_core.h> |
| |
| #include "s3fwrn5.h" |
| #include "firmware.h" |
| #include "nci.h" |
| |
| #define S3FWRN5_NFC_PROTOCOLS (NFC_PROTO_JEWEL_MASK | \ |
| NFC_PROTO_MIFARE_MASK | \ |
| NFC_PROTO_FELICA_MASK | \ |
| NFC_PROTO_ISO14443_MASK | \ |
| NFC_PROTO_ISO14443_B_MASK | \ |
| NFC_PROTO_ISO15693_MASK) |
| |
| static int s3fwrn5_firmware_init(struct s3fwrn5_info *info) |
| { |
| struct s3fwrn5_fw_info *fw_info = &info->fw_info; |
| int ret; |
| |
| s3fwrn5_fw_init(fw_info, "sec_s3fwrn5_firmware.bin"); |
| |
| /* Get firmware data */ |
| ret = s3fwrn5_fw_request_firmware(fw_info); |
| if (ret < 0) |
| dev_err(&fw_info->ndev->nfc_dev->dev, |
| "Failed to get fw file, ret=%02x\n", ret); |
| return ret; |
| } |
| |
| static int s3fwrn5_firmware_update(struct s3fwrn5_info *info) |
| { |
| bool need_update; |
| int ret; |
| |
| /* Update firmware */ |
| |
| s3fwrn5_set_wake(info, false); |
| s3fwrn5_set_mode(info, S3FWRN5_MODE_FW); |
| |
| ret = s3fwrn5_fw_setup(&info->fw_info); |
| if (ret < 0) |
| return ret; |
| |
| need_update = s3fwrn5_fw_check_version(&info->fw_info, |
| info->ndev->manufact_specific_info); |
| if (!need_update) |
| goto out; |
| |
| dev_info(&info->ndev->nfc_dev->dev, "Detected new firmware version\n"); |
| |
| ret = s3fwrn5_fw_download(&info->fw_info); |
| if (ret < 0) |
| goto out; |
| |
| /* Update RF configuration */ |
| |
| s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI); |
| |
| s3fwrn5_set_wake(info, true); |
| ret = s3fwrn5_nci_rf_configure(info, "sec_s3fwrn5_rfreg.bin"); |
| s3fwrn5_set_wake(info, false); |
| |
| out: |
| s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); |
| s3fwrn5_fw_cleanup(&info->fw_info); |
| return ret; |
| } |
| |
| static int s3fwrn5_nci_open(struct nci_dev *ndev) |
| { |
| struct s3fwrn5_info *info = nci_get_drvdata(ndev); |
| |
| if (s3fwrn5_get_mode(info) != S3FWRN5_MODE_COLD) |
| return -EBUSY; |
| |
| s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI); |
| s3fwrn5_set_wake(info, true); |
| |
| return 0; |
| } |
| |
| static int s3fwrn5_nci_close(struct nci_dev *ndev) |
| { |
| struct s3fwrn5_info *info = nci_get_drvdata(ndev); |
| |
| s3fwrn5_set_wake(info, false); |
| s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); |
| |
| return 0; |
| } |
| |
| static int s3fwrn5_nci_send(struct nci_dev *ndev, struct sk_buff *skb) |
| { |
| struct s3fwrn5_info *info = nci_get_drvdata(ndev); |
| int ret; |
| |
| mutex_lock(&info->mutex); |
| |
| if (s3fwrn5_get_mode(info) != S3FWRN5_MODE_NCI) { |
| kfree_skb(skb); |
| mutex_unlock(&info->mutex); |
| return -EINVAL; |
| } |
| |
| ret = s3fwrn5_write(info, skb); |
| if (ret < 0) { |
| kfree_skb(skb); |
| mutex_unlock(&info->mutex); |
| return ret; |
| } |
| |
| consume_skb(skb); |
| mutex_unlock(&info->mutex); |
| return 0; |
| } |
| |
| static int s3fwrn5_nci_post_setup(struct nci_dev *ndev) |
| { |
| struct s3fwrn5_info *info = nci_get_drvdata(ndev); |
| int ret; |
| |
| if (s3fwrn5_firmware_init(info)) { |
| //skip bootloader mode |
| return 0; |
| } |
| |
| ret = s3fwrn5_firmware_update(info); |
| if (ret < 0) |
| return ret; |
| |
| /* NCI core reset */ |
| |
| s3fwrn5_set_mode(info, S3FWRN5_MODE_NCI); |
| s3fwrn5_set_wake(info, true); |
| |
| ret = nci_core_reset(info->ndev); |
| if (ret < 0) |
| return ret; |
| |
| return nci_core_init(info->ndev); |
| } |
| |
| static const struct nci_ops s3fwrn5_nci_ops = { |
| .open = s3fwrn5_nci_open, |
| .close = s3fwrn5_nci_close, |
| .send = s3fwrn5_nci_send, |
| .post_setup = s3fwrn5_nci_post_setup, |
| .prop_ops = s3fwrn5_nci_prop_ops, |
| .n_prop_ops = ARRAY_SIZE(s3fwrn5_nci_prop_ops), |
| }; |
| |
| int s3fwrn5_probe(struct nci_dev **ndev, void *phy_id, struct device *pdev, |
| const struct s3fwrn5_phy_ops *phy_ops) |
| { |
| struct s3fwrn5_info *info; |
| int ret; |
| |
| info = devm_kzalloc(pdev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| info->phy_id = phy_id; |
| info->pdev = pdev; |
| info->phy_ops = phy_ops; |
| mutex_init(&info->mutex); |
| |
| s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); |
| |
| info->ndev = nci_allocate_device(&s3fwrn5_nci_ops, |
| S3FWRN5_NFC_PROTOCOLS, 0, 0); |
| if (!info->ndev) |
| return -ENOMEM; |
| |
| nci_set_parent_dev(info->ndev, pdev); |
| nci_set_drvdata(info->ndev, info); |
| |
| ret = nci_register_device(info->ndev); |
| if (ret < 0) { |
| nci_free_device(info->ndev); |
| return ret; |
| } |
| |
| info->fw_info.ndev = info->ndev; |
| |
| *ndev = info->ndev; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(s3fwrn5_probe); |
| |
| void s3fwrn5_remove(struct nci_dev *ndev) |
| { |
| struct s3fwrn5_info *info = nci_get_drvdata(ndev); |
| |
| s3fwrn5_set_mode(info, S3FWRN5_MODE_COLD); |
| |
| nci_unregister_device(ndev); |
| nci_free_device(ndev); |
| } |
| EXPORT_SYMBOL(s3fwrn5_remove); |
| |
| int s3fwrn5_recv_frame(struct nci_dev *ndev, struct sk_buff *skb, |
| enum s3fwrn5_mode mode) |
| { |
| switch (mode) { |
| case S3FWRN5_MODE_NCI: |
| return nci_recv_frame(ndev, skb); |
| case S3FWRN5_MODE_FW: |
| return s3fwrn5_fw_recv_frame(ndev, skb); |
| default: |
| kfree_skb(skb); |
| return -ENODEV; |
| } |
| } |
| EXPORT_SYMBOL(s3fwrn5_recv_frame); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Samsung S3FWRN5 NFC driver"); |
| MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>"); |