| /* |
| * net/dccp/ccids/ccid3.c |
| * |
| * Copyright (c) 2007 The University of Aberdeen, Scotland, UK |
| * Copyright (c) 2005-7 The University of Waikato, Hamilton, New Zealand. |
| * Copyright (c) 2005-7 Ian McDonald <ian.mcdonald@jandi.co.nz> |
| * |
| * An implementation of the DCCP protocol |
| * |
| * This code has been developed by the University of Waikato WAND |
| * research group. For further information please see http://www.wand.net.nz/ |
| * |
| * This code also uses code from Lulea University, rereleased as GPL by its |
| * authors: |
| * Copyright (c) 2003 Nils-Erik Mattsson, Joacim Haggmark, Magnus Erixzon |
| * |
| * Changes to meet Linux coding standards, to make it meet latest ccid3 draft |
| * and to make it work as a loadable module in the DCCP stack written by |
| * Arnaldo Carvalho de Melo <acme@conectiva.com.br>. |
| * |
| * Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| #include "../dccp.h" |
| #include "ccid3.h" |
| |
| #include <asm/unaligned.h> |
| |
| #ifdef CONFIG_IP_DCCP_CCID3_DEBUG |
| static int ccid3_debug; |
| #define ccid3_pr_debug(format, a...) DCCP_PR_DEBUG(ccid3_debug, format, ##a) |
| #else |
| #define ccid3_pr_debug(format, a...) |
| #endif |
| |
| /* |
| * Transmitter Half-Connection Routines |
| */ |
| /* Oscillation Prevention/Reduction: recommended by rfc3448bis, on by default */ |
| static int do_osc_prev = true; |
| |
| /* |
| * Compute the initial sending rate X_init in the manner of RFC 3390: |
| * |
| * X_init = min(4 * MPS, max(2 * MPS, 4380 bytes)) / RTT |
| * |
| * For consistency with other parts of the code, X_init is scaled by 2^6. |
| */ |
| static inline u64 rfc3390_initial_rate(struct sock *sk) |
| { |
| const u32 mps = dccp_sk(sk)->dccps_mss_cache, |
| w_init = clamp(4380U, 2 * mps, 4 * mps); |
| |
| return scaled_div(w_init << 6, ccid3_hc_tx_sk(sk)->rtt); |
| } |
| |
| /** |
| * ccid3_update_send_interval - Calculate new t_ipi = s / X |
| * This respects the granularity of X (64 * bytes/second) and enforces the |
| * scaled minimum of s * 64 / t_mbi = `s' bytes/second as per RFC 3448/4342. |
| */ |
| static void ccid3_update_send_interval(struct ccid3_hc_tx_sock *hctx) |
| { |
| if (unlikely(hctx->x <= hctx->s)) |
| hctx->x = hctx->s; |
| hctx->t_ipi = scaled_div32(((u64)hctx->s) << 6, hctx->x); |
| } |
| |
| static u32 ccid3_hc_tx_idle_rtt(struct ccid3_hc_tx_sock *hctx, ktime_t now) |
| { |
| u32 delta = ktime_us_delta(now, hctx->t_last_win_count); |
| |
| return delta / hctx->rtt; |
| } |
| |
| /** |
| * ccid3_hc_tx_update_x - Update allowed sending rate X |
| * @stamp: most recent time if available - can be left NULL. |
| * This function tracks draft rfc3448bis, check there for latest details. |
| * |
| * Note: X and X_recv are both stored in units of 64 * bytes/second, to support |
| * fine-grained resolution of sending rates. This requires scaling by 2^6 |
| * throughout the code. Only X_calc is unscaled (in bytes/second). |
| * |
| */ |
| static void ccid3_hc_tx_update_x(struct sock *sk, ktime_t *stamp) |
| { |
| struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); |
| u64 min_rate = 2 * hctx->x_recv; |
| const u64 old_x = hctx->x; |
| ktime_t now = stamp ? *stamp : ktime_get_real(); |
| |
| /* |
| * Handle IDLE periods: do not reduce below RFC3390 initial sending rate |
| * when idling [RFC 4342, 5.1]. Definition of idling is from rfc3448bis: |
| * a sender is idle if it has not sent anything over a 2-RTT-period. |
| * For consistency with X and X_recv, min_rate is also scaled by 2^6. |
| */ |
| if (ccid3_hc_tx_idle_rtt(hctx, now) >= 2) { |
| min_rate = rfc3390_initial_rate(sk); |
| min_rate = max(min_rate, 2 * hctx->x_recv); |
| } |
| |
| if (hctx->p > 0) { |
| |
| hctx->x = min(((u64)hctx->x_calc) << 6, min_rate); |
| |
| } else if (ktime_us_delta(now, hctx->t_ld) - (s64)hctx->rtt >= 0) { |
| |
| hctx->x = min(2 * hctx->x, min_rate); |
| hctx->x = max(hctx->x, |
| scaled_div(((u64)hctx->s) << 6, hctx->rtt)); |
| hctx->t_ld = now; |
| } |
| |
| if (hctx->x != old_x) { |
| ccid3_pr_debug("X_prev=%u, X_now=%u, X_calc=%u, " |
| "X_recv=%u\n", (unsigned)(old_x >> 6), |
| (unsigned)(hctx->x >> 6), hctx->x_calc, |
| (unsigned)(hctx->x_recv >> 6)); |
| |
| ccid3_update_send_interval(hctx); |
| } |
| } |
| |
| /* |
| * ccid3_hc_tx_measure_packet_size - Measuring the packet size `s' (sec 4.1) |
| * @new_len: DCCP payload size in bytes (not used by all methods) |
| */ |
| static u32 ccid3_hc_tx_measure_packet_size(struct sock *sk, const u16 new_len) |
| { |
| #if defined(CONFIG_IP_DCCP_CCID3_MEASURE_S_AS_AVG) |
| return tfrc_ewma(ccid3_hc_tx_sk(sk)->s, new_len, 9); |
| #elif defined(CONFIG_IP_DCCP_CCID3_MEASURE_S_AS_MAX) |
| return max(ccid3_hc_tx_sk(sk)->s, new_len); |
| #else /* CONFIG_IP_DCCP_CCID3_MEASURE_S_AS_MPS */ |
| return dccp_sk(sk)->dccps_mss_cache; |
| #endif |
| } |
| |
| /* |
| * Update Window Counter using the algorithm from [RFC 4342, 8.1]. |
| * As elsewhere, RTT > 0 is assumed by using dccp_sample_rtt(). |
| */ |
| static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx, |
| ktime_t now) |
| { |
| u32 delta = ktime_us_delta(now, hctx->t_last_win_count), |
| quarter_rtts = (4 * delta) / hctx->rtt; |
| |
| if (quarter_rtts > 0) { |
| hctx->t_last_win_count = now; |
| hctx->last_win_count += min(quarter_rtts, 5U); |
| hctx->last_win_count &= 0xF; /* mod 16 */ |
| } |
| } |
| |
| static void ccid3_hc_tx_no_feedback_timer(unsigned long data) |
| { |
| struct sock *sk = (struct sock *)data; |
| struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); |
| unsigned long t_nfb = USEC_PER_SEC / 5; |
| |
| bh_lock_sock(sk); |
| if (sock_owned_by_user(sk)) { |
| /* Try again later. */ |
| /* XXX: set some sensible MIB */ |
| goto restart_timer; |
| } |
| |
| ccid3_pr_debug("%s(%p) entry with%s feedback\n", dccp_role(sk), sk, |
| hctx->feedback ? "" : "out"); |
| |
| /* Ignore and do not restart after leaving the established state */ |
| if ((1 << sk->sk_state) & ~(DCCPF_OPEN | DCCPF_PARTOPEN)) |
| goto out; |
| |
| /* Reset feedback state to "no feedback received" */ |
| hctx->feedback = false; |
| |
| /* |
| * Determine new allowed sending rate X as per draft rfc3448bis-00, 4.4 |
| * RTO is 0 if and only if no feedback has been received yet. |
| */ |
| if (hctx->t_rto == 0 || hctx->p == 0) { |
| |
| /* halve send rate directly */ |
| hctx->x /= 2; |
| ccid3_update_send_interval(hctx); |
| |
| } else { |
| /* |
| * Modify the cached value of X_recv |
| * |
| * If (X_calc > 2 * X_recv) |
| * X_recv = max(X_recv / 2, s / (2 * t_mbi)); |
| * Else |
| * X_recv = X_calc / 4; |
| * |
| * Note that X_recv is scaled by 2^6 while X_calc is not |
| */ |
| BUG_ON(hctx->p && !hctx->x_calc); |
| |
| if (hctx->x_calc > (hctx->x_recv >> 5)) |
| hctx->x_recv /= 2; |
| else { |
| hctx->x_recv = hctx->x_calc; |
| hctx->x_recv <<= 4; |
| } |
| ccid3_hc_tx_update_x(sk, NULL); |
| } |
| ccid3_pr_debug("Reduced X to %llu/64 bytes/sec\n", |
| (unsigned long long)hctx->x); |
| |
| /* |
| * Set new timeout for the nofeedback timer. |
| * See comments in packet_recv() regarding the value of t_RTO. |
| */ |
| if (unlikely(hctx->t_rto == 0)) /* no feedback received yet */ |
| t_nfb = TFRC_INITIAL_TIMEOUT; |
| else |
| t_nfb = max(hctx->t_rto, 2 * hctx->t_ipi); |
| |
| restart_timer: |
| sk_reset_timer(sk, &hctx->no_feedback_timer, |
| jiffies + usecs_to_jiffies(t_nfb)); |
| out: |
| bh_unlock_sock(sk); |
| sock_put(sk); |
| } |
| |
| /** |
| * ccid3_hc_tx_send_packet - Delay-based dequeueing of TX packets |
| * @skb: next packet candidate to send on @sk |
| * This function uses the convention of ccid_packet_dequeue_eval() and |
| * returns a millisecond-delay value between 0 and t_mbi = 64000 msec. |
| */ |
| static int ccid3_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb) |
| { |
| struct dccp_sock *dp = dccp_sk(sk); |
| struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); |
| ktime_t now = ktime_get_real(); |
| s64 delay; |
| |
| /* |
| * This function is called only for Data and DataAck packets. Sending |
| * zero-sized Data(Ack)s is theoretically possible, but for congestion |
| * control this case is pathological - ignore it. |
| */ |
| if (unlikely(skb->len == 0)) |
| return -EBADMSG; |
| |
| if (hctx->s == 0) { |
| sk_reset_timer(sk, &hctx->no_feedback_timer, (jiffies + |
| usecs_to_jiffies(TFRC_INITIAL_TIMEOUT))); |
| hctx->last_win_count = 0; |
| hctx->t_last_win_count = now; |
| |
| /* Set t_0 for initial packet */ |
| hctx->t_nom = now; |
| |
| /* |
| * Use initial RTT sample when available: recommended by erratum |
| * to RFC 4342. This implements the initialisation procedure of |
| * draft rfc3448bis, section 4.2. Remember, X is scaled by 2^6. |
| */ |
| if (dp->dccps_syn_rtt) { |
| ccid3_pr_debug("SYN RTT = %uus\n", dp->dccps_syn_rtt); |
| hctx->rtt = dp->dccps_syn_rtt; |
| hctx->x = rfc3390_initial_rate(sk); |
| hctx->t_ld = now; |
| } else { |
| /* |
| * Sender does not have RTT sample: |
| * - set fallback RTT (RFC 4340, 3.4) since a RTT value |
| * is needed in several parts (e.g. window counter); |
| * - set sending rate X_pps = 1pps as per RFC 3448, 4.2. |
| */ |
| hctx->rtt = DCCP_FALLBACK_RTT; |
| hctx->x = dp->dccps_mss_cache; |
| hctx->x <<= 6; |
| } |
| |
| /* Compute t_ipi = s / X */ |
| hctx->s = ccid3_hc_tx_measure_packet_size(sk, skb->len); |
| ccid3_update_send_interval(hctx); |
| |
| /* Seed value for Oscillation Prevention (sec. 4.5) */ |
| hctx->r_sqmean = tfrc_scaled_sqrt(hctx->rtt); |
| |
| } else { |
| delay = ktime_us_delta(hctx->t_nom, now); |
| ccid3_pr_debug("delay=%ld\n", (long)delay); |
| /* |
| * Scheduling of packet transmissions [RFC 3448, 4.6] |
| * |
| * if (t_now > t_nom - delta) |
| * // send the packet now |
| * else |
| * // send the packet in (t_nom - t_now) milliseconds. |
| */ |
| if (delay >= TFRC_T_DELTA) |
| return (u32)delay / USEC_PER_MSEC; |
| |
| ccid3_hc_tx_update_win_count(hctx, now); |
| } |
| |
| /* prepare to send now (add options etc.) */ |
| dp->dccps_hc_tx_insert_options = 1; |
| DCCP_SKB_CB(skb)->dccpd_ccval = hctx->last_win_count; |
| |
| /* set the nominal send time for the next following packet */ |
| hctx->t_nom = ktime_add_us(hctx->t_nom, hctx->t_ipi); |
| return CCID_PACKET_SEND_AT_ONCE; |
| } |
| |
| static void ccid3_hc_tx_packet_sent(struct sock *sk, unsigned int len) |
| { |
| struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); |
| |
| /* Changes to s will become effective the next time X is computed */ |
| hctx->s = ccid3_hc_tx_measure_packet_size(sk, len); |
| |
| if (tfrc_tx_hist_add(&hctx->hist, dccp_sk(sk)->dccps_gss)) |
| DCCP_CRIT("packet history - out of memory!"); |
| } |
| |
| static void ccid3_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) |
| { |
| struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); |
| struct tfrc_tx_hist_entry *acked; |
| ktime_t now; |
| unsigned long t_nfb; |
| u32 r_sample; |
| |
| /* we are only interested in ACKs */ |
| if (!(DCCP_SKB_CB(skb)->dccpd_type == DCCP_PKT_ACK || |
| DCCP_SKB_CB(skb)->dccpd_type == DCCP_PKT_DATAACK)) |
| return; |
| /* |
| * Locate the acknowledged packet in the TX history. |
| * |
| * Returning "entry not found" here can for instance happen when |
| * - the host has not sent out anything (e.g. a passive server), |
| * - the Ack is outdated (packet with higher Ack number was received), |
| * - it is a bogus Ack (for a packet not sent on this connection). |
| */ |
| acked = tfrc_tx_hist_find_entry(hctx->hist, dccp_hdr_ack_seq(skb)); |
| if (acked == NULL) |
| return; |
| /* For the sake of RTT sampling, ignore/remove all older entries */ |
| tfrc_tx_hist_purge(&acked->next); |
| |
| /* Update the moving average for the RTT estimate (RFC 3448, 4.3) */ |
| now = ktime_get_real(); |
| r_sample = dccp_sample_rtt(sk, ktime_us_delta(now, acked->stamp)); |
| hctx->rtt = tfrc_ewma(hctx->rtt, r_sample, 9); |
| |
| /* |
| * Update allowed sending rate X as per draft rfc3448bis-00, 4.2/3 |
| */ |
| if (!hctx->feedback) { |
| hctx->feedback = true; |
| |
| if (hctx->t_rto == 0) { |
| /* |
| * Initial feedback packet: Larger Initial Windows (4.2) |
| */ |
| hctx->x = rfc3390_initial_rate(sk); |
| hctx->t_ld = now; |
| |
| ccid3_update_send_interval(hctx); |
| |
| goto done_computing_x; |
| } else if (hctx->p == 0) { |
| /* |
| * First feedback after nofeedback timer expiry (4.3) |
| */ |
| goto done_computing_x; |
| } |
| } |
| |
| /* Update sending rate (step 4 of [RFC 3448, 4.3]) */ |
| if (hctx->p > 0) |
| hctx->x_calc = tfrc_calc_x(hctx->s, hctx->rtt, hctx->p); |
| ccid3_hc_tx_update_x(sk, &now); |
| |
| done_computing_x: |
| ccid3_pr_debug("%s(%p), RTT=%uus (sample=%uus), s=%u, " |
| "p=%u, X_calc=%u, X_recv=%u, X=%u\n", |
| dccp_role(sk), sk, hctx->rtt, r_sample, |
| hctx->s, hctx->p, hctx->x_calc, |
| (unsigned)(hctx->x_recv >> 6), |
| (unsigned)(hctx->x >> 6)); |
| /* |
| * Oscillation Reduction (RFC 3448, 4.5) - modifying t_ipi according to |
| * RTT changes, multiplying by X/X_inst = sqrt(R_sample)/R_sqmean. This |
| * can be useful if few connections share a link, avoiding that buffer |
| * fill levels (RTT) oscillate as a result of frequent adjustments to X. |
| * A useful presentation with background information is in |
| * Joerg Widmer, "Equation-Based Congestion Control", |
| * MSc Thesis, University of Mannheim, Germany, 2000 |
| * (sec. 3.6.4), who calls this ISM ("Inter-packet Space Modulation"). |
| */ |
| if (do_osc_prev) { |
| r_sample = tfrc_scaled_sqrt(r_sample); |
| /* |
| * The modulation can work in both ways: increase/decrease t_ipi |
| * according to long-term increases/decreases of the RTT. The |
| * former is a useful measure, since it works against queue |
| * build-up. The latter temporarily increases the sending rate, |
| * so that buffers fill up more quickly. This in turn causes |
| * the RTT to increase, so that either later reduction becomes |
| * necessary or the RTT stays at a very high level. Decreasing |
| * t_ipi is therefore not supported. |
| * Furthermore, during the initial slow-start phase the RTT |
| * naturally increases, where using the algorithm would cause |
| * delays. Hence it is disabled during the initial slow-start. |
| */ |
| if (r_sample > hctx->r_sqmean && hctx->p > 0) |
| hctx->t_ipi = div_u64((u64)hctx->t_ipi * (u64)r_sample, |
| hctx->r_sqmean); |
| hctx->t_ipi = min_t(u32, hctx->t_ipi, TFRC_T_MBI); |
| /* update R_sqmean _after_ computing the modulation factor */ |
| hctx->r_sqmean = tfrc_ewma(hctx->r_sqmean, r_sample, 9); |
| } |
| |
| /* unschedule no feedback timer */ |
| sk_stop_timer(sk, &hctx->no_feedback_timer); |
| |
| /* |
| * As we have calculated new ipi, delta, t_nom it is possible |
| * that we now can send a packet, so wake up dccp_wait_for_ccid |
| */ |
| sk->sk_write_space(sk); |
| |
| /* |
| * Update timeout interval for the nofeedback timer. |
| * We use a configuration option to increase the lower bound. |
| * This can help avoid triggering the nofeedback timer too |
| * often ('spinning') on LANs with small RTTs. |
| */ |
| hctx->t_rto = max_t(u32, 4 * hctx->rtt, (CONFIG_IP_DCCP_CCID3_RTO * |
| (USEC_PER_SEC / 1000))); |
| /* |
| * Schedule no feedback timer to expire in |
| * max(t_RTO, 2 * s/X) = max(t_RTO, 2 * t_ipi) |
| */ |
| t_nfb = max(hctx->t_rto, 2 * hctx->t_ipi); |
| |
| ccid3_pr_debug("%s(%p), Scheduled no feedback timer to " |
| "expire in %lu jiffies (%luus)\n", |
| dccp_role(sk), sk, usecs_to_jiffies(t_nfb), t_nfb); |
| |
| sk_reset_timer(sk, &hctx->no_feedback_timer, |
| jiffies + usecs_to_jiffies(t_nfb)); |
| } |
| |
| static int ccid3_hc_tx_parse_options(struct sock *sk, u8 packet_type, |
| u8 option, u8 *optval, u8 optlen) |
| { |
| struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); |
| __be32 opt_val; |
| |
| switch (option) { |
| case TFRC_OPT_RECEIVE_RATE: |
| case TFRC_OPT_LOSS_EVENT_RATE: |
| /* Must be ignored on Data packets, cf. RFC 4342 8.3 and 8.5 */ |
| if (packet_type == DCCP_PKT_DATA) |
| break; |
| if (unlikely(optlen != 4)) { |
| DCCP_WARN("%s(%p), invalid len %d for %u\n", |
| dccp_role(sk), sk, optlen, option); |
| return -EINVAL; |
| } |
| opt_val = ntohl(get_unaligned((__be32 *)optval)); |
| |
| if (option == TFRC_OPT_RECEIVE_RATE) { |
| /* Receive Rate is kept in units of 64 bytes/second */ |
| hctx->x_recv = opt_val; |
| hctx->x_recv <<= 6; |
| |
| ccid3_pr_debug("%s(%p), RECEIVE_RATE=%u\n", |
| dccp_role(sk), sk, opt_val); |
| } else { |
| /* Update the fixpoint Loss Event Rate fraction */ |
| hctx->p = tfrc_invert_loss_event_rate(opt_val); |
| |
| ccid3_pr_debug("%s(%p), LOSS_EVENT_RATE=%u\n", |
| dccp_role(sk), sk, opt_val); |
| } |
| } |
| return 0; |
| } |
| |
| static int ccid3_hc_tx_init(struct ccid *ccid, struct sock *sk) |
| { |
| struct ccid3_hc_tx_sock *hctx = ccid_priv(ccid); |
| |
| hctx->hist = NULL; |
| setup_timer(&hctx->no_feedback_timer, |
| ccid3_hc_tx_no_feedback_timer, (unsigned long)sk); |
| return 0; |
| } |
| |
| static void ccid3_hc_tx_exit(struct sock *sk) |
| { |
| struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); |
| |
| sk_stop_timer(sk, &hctx->no_feedback_timer); |
| tfrc_tx_hist_purge(&hctx->hist); |
| } |
| |
| static void ccid3_hc_tx_get_info(struct sock *sk, struct tcp_info *info) |
| { |
| info->tcpi_rto = ccid3_hc_tx_sk(sk)->t_rto; |
| info->tcpi_rtt = ccid3_hc_tx_sk(sk)->rtt; |
| } |
| |
| static int ccid3_hc_tx_getsockopt(struct sock *sk, const int optname, int len, |
| u32 __user *optval, int __user *optlen) |
| { |
| const struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk); |
| struct tfrc_tx_info tfrc; |
| const void *val; |
| |
| switch (optname) { |
| case DCCP_SOCKOPT_CCID_TX_INFO: |
| if (len < sizeof(tfrc)) |
| return -EINVAL; |
| tfrc.tfrctx_x = hctx->x; |
| tfrc.tfrctx_x_recv = hctx->x_recv; |
| tfrc.tfrctx_x_calc = hctx->x_calc; |
| tfrc.tfrctx_rtt = hctx->rtt; |
| tfrc.tfrctx_p = hctx->p; |
| tfrc.tfrctx_rto = hctx->t_rto; |
| tfrc.tfrctx_ipi = hctx->t_ipi; |
| len = sizeof(tfrc); |
| val = &tfrc; |
| break; |
| default: |
| return -ENOPROTOOPT; |
| } |
| |
| if (put_user(len, optlen) || copy_to_user(optval, val, len)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| /* |
| * Receiver Half-Connection Routines |
| */ |
| static void ccid3_hc_rx_send_feedback(struct sock *sk, |
| const struct sk_buff *skb, |
| enum ccid3_fback_type fbtype) |
| { |
| struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); |
| |
| switch (fbtype) { |
| case CCID3_FBACK_INITIAL: |
| hcrx->x_recv = 0; |
| hcrx->p_inverse = ~0U; /* see RFC 4342, 8.5 */ |
| break; |
| case CCID3_FBACK_PARAM_CHANGE: |
| if (unlikely(hcrx->feedback == CCID3_FBACK_NONE)) { |
| /* |
| * rfc3448bis-06, 6.3.1: First packet(s) lost or marked |
| * FIXME: in rfc3448bis the receiver returns X_recv=0 |
| * here as it normally would in the first feedback packet. |
| * However this is not possible yet, since the code still |
| * uses RFC 3448, i.e. |
| * If (p > 0) |
| * Calculate X_calc using the TCP throughput equation. |
| * X = max(min(X_calc, 2*X_recv), s/t_mbi); |
| * would bring X down to s/t_mbi. That is why we return |
| * X_recv according to rfc3448bis-06 for the moment. |
| */ |
| u32 s = tfrc_rx_hist_packet_size(&hcrx->hist), |
| rtt = tfrc_rx_hist_rtt(&hcrx->hist); |
| |
| hcrx->x_recv = scaled_div32(s, 2 * rtt); |
| break; |
| } |
| /* |
| * When parameters change (new loss or p > p_prev), we do not |
| * have a reliable estimate for R_m of [RFC 3448, 6.2] and so |
| * always check whether at least RTT time units were covered. |
| */ |
| hcrx->x_recv = tfrc_rx_hist_x_recv(&hcrx->hist, hcrx->x_recv); |
| break; |
| case CCID3_FBACK_PERIODIC: |
| /* |
| * Step (2) of rfc3448bis-06, 6.2: |
| * - if no data packets have been received, just restart timer |
| * - if data packets have been received, re-compute X_recv |
| */ |
| if (hcrx->hist.bytes_recvd == 0) |
| goto prepare_for_next_time; |
| hcrx->x_recv = tfrc_rx_hist_x_recv(&hcrx->hist, hcrx->x_recv); |
| break; |
| default: |
| return; |
| } |
| |
| ccid3_pr_debug("X_recv=%u, 1/p=%u\n", hcrx->x_recv, hcrx->p_inverse); |
| |
| dccp_sk(sk)->dccps_hc_rx_insert_options = 1; |
| dccp_send_ack(sk); |
| |
| prepare_for_next_time: |
| tfrc_rx_hist_restart_byte_counter(&hcrx->hist); |
| hcrx->last_counter = dccp_hdr(skb)->dccph_ccval; |
| hcrx->feedback = fbtype; |
| } |
| |
| static int ccid3_hc_rx_insert_options(struct sock *sk, struct sk_buff *skb) |
| { |
| const struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); |
| __be32 x_recv, pinv; |
| |
| if (!(sk->sk_state == DCCP_OPEN || sk->sk_state == DCCP_PARTOPEN)) |
| return 0; |
| |
| if (dccp_packet_without_ack(skb)) |
| return 0; |
| |
| x_recv = htonl(hcrx->x_recv); |
| pinv = htonl(hcrx->p_inverse); |
| |
| if (dccp_insert_option(sk, skb, TFRC_OPT_LOSS_EVENT_RATE, |
| &pinv, sizeof(pinv)) || |
| dccp_insert_option(sk, skb, TFRC_OPT_RECEIVE_RATE, |
| &x_recv, sizeof(x_recv))) |
| return -1; |
| |
| return 0; |
| } |
| |
| /** ccid3_first_li - Implements [RFC 3448, 6.3.1] |
| * |
| * Determine the length of the first loss interval via inverse lookup. |
| * Assume that X_recv can be computed by the throughput equation |
| * s |
| * X_recv = -------- |
| * R * fval |
| * Find some p such that f(p) = fval; return 1/p (scaled). |
| */ |
| static u32 ccid3_first_li(struct sock *sk) |
| { |
| struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); |
| u32 s = tfrc_rx_hist_packet_size(&hcrx->hist), |
| rtt = tfrc_rx_hist_rtt(&hcrx->hist), x_recv, p; |
| u64 fval; |
| |
| /* |
| * rfc3448bis-06, 6.3.1: First data packet(s) are marked or lost. Set p |
| * to give the equivalent of X_target = s/(2*R). Thus fval = 2 and so p |
| * is about 20.64%. This yields an interval length of 4.84 (rounded up). |
| */ |
| if (unlikely(hcrx->feedback == CCID3_FBACK_NONE)) |
| return 5; |
| |
| x_recv = tfrc_rx_hist_x_recv(&hcrx->hist, hcrx->x_recv); |
| if (x_recv == 0) |
| goto failed; |
| |
| fval = scaled_div32(scaled_div(s, rtt), x_recv); |
| p = tfrc_calc_x_reverse_lookup(fval); |
| |
| ccid3_pr_debug("%s(%p), receive rate=%u bytes/s, implied " |
| "loss rate=%u\n", dccp_role(sk), sk, x_recv, p); |
| |
| if (p > 0) |
| return scaled_div(1, p); |
| failed: |
| return UINT_MAX; |
| } |
| |
| static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) |
| { |
| struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); |
| const u64 ndp = dccp_sk(sk)->dccps_options_received.dccpor_ndp; |
| const bool is_data_packet = dccp_data_packet(skb); |
| |
| /* |
| * Perform loss detection and handle pending losses |
| */ |
| if (tfrc_rx_congestion_event(&hcrx->hist, &hcrx->li_hist, |
| skb, ndp, ccid3_first_li, sk)) |
| ccid3_hc_rx_send_feedback(sk, skb, CCID3_FBACK_PARAM_CHANGE); |
| /* |
| * Feedback for first non-empty data packet (RFC 3448, 6.3) |
| */ |
| else if (unlikely(hcrx->feedback == CCID3_FBACK_NONE && is_data_packet)) |
| ccid3_hc_rx_send_feedback(sk, skb, CCID3_FBACK_INITIAL); |
| /* |
| * Check if the periodic once-per-RTT feedback is due; RFC 4342, 10.3 |
| */ |
| else if (!tfrc_rx_hist_loss_pending(&hcrx->hist) && is_data_packet && |
| SUB16(dccp_hdr(skb)->dccph_ccval, hcrx->last_counter) > 3) |
| ccid3_hc_rx_send_feedback(sk, skb, CCID3_FBACK_PERIODIC); |
| } |
| |
| static int ccid3_hc_rx_init(struct ccid *ccid, struct sock *sk) |
| { |
| struct ccid3_hc_rx_sock *hcrx = ccid_priv(ccid); |
| |
| tfrc_lh_init(&hcrx->li_hist); |
| return tfrc_rx_hist_init(&hcrx->hist, sk); |
| } |
| |
| static void ccid3_hc_rx_exit(struct sock *sk) |
| { |
| struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); |
| |
| tfrc_rx_hist_purge(&hcrx->hist); |
| tfrc_lh_cleanup(&hcrx->li_hist); |
| } |
| |
| static void ccid3_hc_rx_get_info(struct sock *sk, struct tcp_info *info) |
| { |
| info->tcpi_options |= TCPI_OPT_TIMESTAMPS; |
| info->tcpi_rcv_rtt = tfrc_rx_hist_rtt(&ccid3_hc_rx_sk(sk)->hist); |
| } |
| |
| static int ccid3_hc_rx_getsockopt(struct sock *sk, const int optname, int len, |
| u32 __user *optval, int __user *optlen) |
| { |
| const struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk); |
| struct tfrc_rx_info rx_info; |
| const void *val; |
| |
| switch (optname) { |
| case DCCP_SOCKOPT_CCID_RX_INFO: |
| if (len < sizeof(rx_info)) |
| return -EINVAL; |
| rx_info.tfrcrx_x_recv = hcrx->x_recv; |
| rx_info.tfrcrx_rtt = tfrc_rx_hist_rtt(&hcrx->hist); |
| rx_info.tfrcrx_p = tfrc_invert_loss_event_rate(hcrx->p_inverse); |
| len = sizeof(rx_info); |
| val = &rx_info; |
| break; |
| default: |
| return -ENOPROTOOPT; |
| } |
| |
| if (put_user(len, optlen) || copy_to_user(optval, val, len)) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static struct ccid_operations ccid3 = { |
| .ccid_id = DCCPC_CCID3, |
| .ccid_name = "TCP-Friendly Rate Control", |
| .ccid_owner = THIS_MODULE, |
| .ccid_hc_tx_obj_size = sizeof(struct ccid3_hc_tx_sock), |
| .ccid_hc_tx_init = ccid3_hc_tx_init, |
| .ccid_hc_tx_exit = ccid3_hc_tx_exit, |
| .ccid_hc_tx_send_packet = ccid3_hc_tx_send_packet, |
| .ccid_hc_tx_packet_sent = ccid3_hc_tx_packet_sent, |
| .ccid_hc_tx_packet_recv = ccid3_hc_tx_packet_recv, |
| .ccid_hc_tx_parse_options = ccid3_hc_tx_parse_options, |
| .ccid_hc_rx_obj_size = sizeof(struct ccid3_hc_rx_sock), |
| .ccid_hc_rx_init = ccid3_hc_rx_init, |
| .ccid_hc_rx_exit = ccid3_hc_rx_exit, |
| .ccid_hc_rx_insert_options = ccid3_hc_rx_insert_options, |
| .ccid_hc_rx_packet_recv = ccid3_hc_rx_packet_recv, |
| .ccid_hc_rx_get_info = ccid3_hc_rx_get_info, |
| .ccid_hc_tx_get_info = ccid3_hc_tx_get_info, |
| .ccid_hc_rx_getsockopt = ccid3_hc_rx_getsockopt, |
| .ccid_hc_tx_getsockopt = ccid3_hc_tx_getsockopt, |
| }; |
| |
| module_param(do_osc_prev, bool, 0644); |
| MODULE_PARM_DESC(do_osc_prev, "Use Oscillation Prevention (RFC 3448, 4.5)"); |
| |
| #ifdef CONFIG_IP_DCCP_CCID3_DEBUG |
| module_param(ccid3_debug, bool, 0644); |
| MODULE_PARM_DESC(ccid3_debug, "Enable debug messages"); |
| #endif |
| |
| static __init int ccid3_module_init(void) |
| { |
| struct timespec tp; |
| |
| /* |
| * Without a fine-grained clock resolution, RTTs/X_recv are not sampled |
| * correctly and feedback is sent either too early or too late. |
| */ |
| hrtimer_get_res(CLOCK_MONOTONIC, &tp); |
| if (tp.tv_sec || tp.tv_nsec > DCCP_TIME_RESOLUTION * NSEC_PER_USEC) { |
| printk(KERN_ERR "%s: Timer too coarse (%ld usec), need %u-usec" |
| " resolution - check your clocksource.\n", __func__, |
| tp.tv_nsec/NSEC_PER_USEC, DCCP_TIME_RESOLUTION); |
| return -ESOCKTNOSUPPORT; |
| } |
| return ccid_register(&ccid3); |
| } |
| module_init(ccid3_module_init); |
| |
| static __exit void ccid3_module_exit(void) |
| { |
| ccid_unregister(&ccid3); |
| } |
| module_exit(ccid3_module_exit); |
| |
| MODULE_AUTHOR("Ian McDonald <ian.mcdonald@jandi.co.nz>, " |
| "Arnaldo Carvalho de Melo <acme@ghostprotocols.net>"); |
| MODULE_DESCRIPTION("DCCP TFRC CCID3 CCID"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("net-dccp-ccid-3"); |