drivers/net/phy/dp83822.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /* Driver for the Texas Instruments DP83822, DP83825 and DP83826 PHYs.
  *
  * Copyright (C) 2017 Texas Instruments Inc.
  */

 #include <linux/ethtool.h>
 #include <linux/etherdevice.h>
 #include <linux/kernel.h>
 #include <linux/mii.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/phy.h>
 #include <linux/netdevice.h>

 #define DP83822_PHY_ID	        0x2000a240
 #define DP83825S_PHY_ID		0x2000a140
 #define DP83825I_PHY_ID		0x2000a150
 #define DP83825CM_PHY_ID	0x2000a160
 #define DP83825CS_PHY_ID	0x2000a170
 #define DP83826C_PHY_ID		0x2000a130
 #define DP83826NC_PHY_ID	0x2000a110

 #define DP83822_DEVADDR		0x1f

 #define MII_DP83822_CTRL_2	0x0a
 #define MII_DP83822_PHYSTS	0x10
 #define MII_DP83822_PHYSCR	0x11
 #define MII_DP83822_MISR1	0x12
 #define MII_DP83822_MISR2	0x13
 #define MII_DP83822_FCSCR	0x14
 #define MII_DP83822_RCSR	0x17
 #define MII_DP83822_RESET_CTRL	0x1f
 #define MII_DP83822_GENCFG	0x465
 #define MII_DP83822_SOR1	0x467

 /* GENCFG */
 #define DP83822_SIG_DET_LOW	BIT(0)

 /* Control Register 2 bits */
 #define DP83822_FX_ENABLE	BIT(14)

 #define DP83822_HW_RESET	BIT(15)
 #define DP83822_SW_RESET	BIT(14)

 /* PHY STS bits */
 #define DP83822_PHYSTS_DUPLEX			BIT(2)
 #define DP83822_PHYSTS_10			BIT(1)
 #define DP83822_PHYSTS_LINK			BIT(0)

 /* PHYSCR Register Fields */
 #define DP83822_PHYSCR_INT_OE		BIT(0) /* Interrupt Output Enable */
 #define DP83822_PHYSCR_INTEN		BIT(1) /* Interrupt Enable */

 /* MISR1 bits */
 #define DP83822_RX_ERR_HF_INT_EN	BIT(0)
 #define DP83822_FALSE_CARRIER_HF_INT_EN	BIT(1)
 #define DP83822_ANEG_COMPLETE_INT_EN	BIT(2)
 #define DP83822_DUP_MODE_CHANGE_INT_EN	BIT(3)
 #define DP83822_SPEED_CHANGED_INT_EN	BIT(4)
 #define DP83822_LINK_STAT_INT_EN	BIT(5)
 #define DP83822_ENERGY_DET_INT_EN	BIT(6)
 #define DP83822_LINK_QUAL_INT_EN	BIT(7)

 /* MISR2 bits */
 #define DP83822_JABBER_DET_INT_EN	BIT(0)
 #define DP83822_WOL_PKT_INT_EN		BIT(1)
 #define DP83822_SLEEP_MODE_INT_EN	BIT(2)
 #define DP83822_MDI_XOVER_INT_EN	BIT(3)
 #define DP83822_LB_FIFO_INT_EN		BIT(4)
 #define DP83822_PAGE_RX_INT_EN		BIT(5)
 #define DP83822_ANEG_ERR_INT_EN		BIT(6)
 #define DP83822_EEE_ERROR_CHANGE_INT_EN	BIT(7)

 /* INT_STAT1 bits */
 #define DP83822_WOL_INT_EN	BIT(4)
 #define DP83822_WOL_INT_STAT	BIT(12)

 #define MII_DP83822_RXSOP1	0x04a5
 #define	MII_DP83822_RXSOP2	0x04a6
 #define	MII_DP83822_RXSOP3	0x04a7

 /* WoL Registers */
 #define	MII_DP83822_WOL_CFG	0x04a0
 #define	MII_DP83822_WOL_STAT	0x04a1
 #define	MII_DP83822_WOL_DA1	0x04a2
 #define	MII_DP83822_WOL_DA2	0x04a3
 #define	MII_DP83822_WOL_DA3	0x04a4

 /* WoL bits */
 #define DP83822_WOL_MAGIC_EN	BIT(0)
 #define DP83822_WOL_SECURE_ON	BIT(5)
 #define DP83822_WOL_EN		BIT(7)
 #define DP83822_WOL_INDICATION_SEL BIT(8)
 #define DP83822_WOL_CLR_INDICATION BIT(11)

 /* RSCR bits */
 #define DP83822_RX_CLK_SHIFT	BIT(12)
 #define DP83822_TX_CLK_SHIFT	BIT(11)

 /* SOR1 mode */
 #define DP83822_STRAP_MODE1	0
 #define DP83822_STRAP_MODE2	BIT(0)
 #define DP83822_STRAP_MODE3	BIT(1)
 #define DP83822_STRAP_MODE4	GENMASK(1, 0)

 #define DP83822_COL_STRAP_MASK	GENMASK(11, 10)
 #define DP83822_COL_SHIFT	10
 #define DP83822_RX_ER_STR_MASK	GENMASK(9, 8)
 #define DP83822_RX_ER_SHIFT	8

 #define MII_DP83822_FIBER_ADVERTISE    (ADVERTISED_TP | ADVERTISED_MII | \
 					ADVERTISED_FIBRE | \
 					ADVERTISED_Pause | ADVERTISED_Asym_Pause)

 struct dp83822_private {
 	bool fx_signal_det_low;
 	int fx_enabled;
 	u16 fx_sd_enable;
 };

 static int dp83822_set_wol(struct phy_device *phydev,
 			   struct ethtool_wolinfo *wol)
 {
 	struct net_device *ndev = phydev->attached_dev;
 	u16 value;
 	const u8 *mac;

 	if (wol->wolopts & (WAKE_MAGIC | WAKE_MAGICSECURE)) {
 		mac = (const u8 *)ndev->dev_addr;

 		if (!is_valid_ether_addr(mac))
 			return -EINVAL;

 		/* MAC addresses start with byte 5, but stored in mac[0].
 		 * 822 PHYs store bytes 4|5, 2|3, 0|1
 		 */
 		phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA1,
 			      (mac[1] << 8) | mac[0]);
 		phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA2,
 			      (mac[3] << 8) | mac[2]);
 		phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA3,
 			      (mac[5] << 8) | mac[4]);

 		value = phy_read_mmd(phydev, DP83822_DEVADDR,
 				     MII_DP83822_WOL_CFG);
 		if (wol->wolopts & WAKE_MAGIC)
 			value |= DP83822_WOL_MAGIC_EN;
 		else
 			value &= ~DP83822_WOL_MAGIC_EN;

 		if (wol->wolopts & WAKE_MAGICSECURE) {
 			phy_write_mmd(phydev, DP83822_DEVADDR,
 				      MII_DP83822_RXSOP1,
 				      (wol->sopass[1] << 8) | wol->sopass[0]);
 			phy_write_mmd(phydev, DP83822_DEVADDR,
 				      MII_DP83822_RXSOP2,
 				      (wol->sopass[3] << 8) | wol->sopass[2]);
 			phy_write_mmd(phydev, DP83822_DEVADDR,
 				      MII_DP83822_RXSOP3,
 				      (wol->sopass[5] << 8) | wol->sopass[4]);
 			value |= DP83822_WOL_SECURE_ON;
 		} else {
 			value &= ~DP83822_WOL_SECURE_ON;
 		}

 		/* Clear any pending WoL interrupt */
 		phy_read(phydev, MII_DP83822_MISR2);

 		value |= DP83822_WOL_EN | DP83822_WOL_INDICATION_SEL |
 			 DP83822_WOL_CLR_INDICATION;

 		return phy_write_mmd(phydev, DP83822_DEVADDR,
 				     MII_DP83822_WOL_CFG, value);
 	} else {
 		return phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
 					  MII_DP83822_WOL_CFG, DP83822_WOL_EN);
 	}
 }

 static void dp83822_get_wol(struct phy_device *phydev,
 			    struct ethtool_wolinfo *wol)
 {
 	int value;
 	u16 sopass_val;

 	wol->supported = (WAKE_MAGIC | WAKE_MAGICSECURE);
 	wol->wolopts = 0;

 	value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);

 	if (value & DP83822_WOL_MAGIC_EN)
 		wol->wolopts |= WAKE_MAGIC;

 	if (value & DP83822_WOL_SECURE_ON) {
 		sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
 					  MII_DP83822_RXSOP1);
 		wol->sopass[0] = (sopass_val & 0xff);
 		wol->sopass[1] = (sopass_val >> 8);

 		sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
 					  MII_DP83822_RXSOP2);
 		wol->sopass[2] = (sopass_val & 0xff);
 		wol->sopass[3] = (sopass_val >> 8);

 		sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
 					  MII_DP83822_RXSOP3);
 		wol->sopass[4] = (sopass_val & 0xff);
 		wol->sopass[5] = (sopass_val >> 8);

 		wol->wolopts |= WAKE_MAGICSECURE;
 	}

 	/* WoL is not enabled so set wolopts to 0 */
 	if (!(value & DP83822_WOL_EN))
 		wol->wolopts = 0;
 }

 static int dp83822_config_intr(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822 = phydev->priv;
 	int misr_status;
 	int physcr_status;
 	int err;

 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
 		misr_status = phy_read(phydev, MII_DP83822_MISR1);
 		if (misr_status < 0)
 			return misr_status;

 		misr_status |= (DP83822_RX_ERR_HF_INT_EN |
 				DP83822_FALSE_CARRIER_HF_INT_EN |
 				DP83822_LINK_STAT_INT_EN |
 				DP83822_ENERGY_DET_INT_EN |
 				DP83822_LINK_QUAL_INT_EN);

 		if (!dp83822->fx_enabled)
 			misr_status |= DP83822_ANEG_COMPLETE_INT_EN |
 				       DP83822_DUP_MODE_CHANGE_INT_EN |
 				       DP83822_SPEED_CHANGED_INT_EN;


 		err = phy_write(phydev, MII_DP83822_MISR1, misr_status);
 		if (err < 0)
 			return err;

 		misr_status = phy_read(phydev, MII_DP83822_MISR2);
 		if (misr_status < 0)
 			return misr_status;

 		misr_status |= (DP83822_JABBER_DET_INT_EN |
 				DP83822_SLEEP_MODE_INT_EN |
 				DP83822_LB_FIFO_INT_EN |
 				DP83822_PAGE_RX_INT_EN |
 				DP83822_EEE_ERROR_CHANGE_INT_EN);

 		if (!dp83822->fx_enabled)
 			misr_status |= DP83822_MDI_XOVER_INT_EN |
 				       DP83822_ANEG_ERR_INT_EN |
 				       DP83822_WOL_PKT_INT_EN;

 		err = phy_write(phydev, MII_DP83822_MISR2, misr_status);
 		if (err < 0)
 			return err;

 		physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
 		if (physcr_status < 0)
 			return physcr_status;

 		physcr_status |= DP83822_PHYSCR_INT_OE | DP83822_PHYSCR_INTEN;

 	} else {
 		err = phy_write(phydev, MII_DP83822_MISR1, 0);
 		if (err < 0)
 			return err;

 		err = phy_write(phydev, MII_DP83822_MISR2, 0);
 		if (err < 0)
 			return err;

 		physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
 		if (physcr_status < 0)
 			return physcr_status;

 		physcr_status &= ~DP83822_PHYSCR_INTEN;
 	}

 	return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
 }

 static irqreturn_t dp83822_handle_interrupt(struct phy_device *phydev)
 {
 	bool trigger_machine = false;
 	int irq_status;

 	/* The MISR1 and MISR2 registers are holding the interrupt status in
 	 * the upper half (15:8), while the lower half (7:0) is used for
 	 * controlling the interrupt enable state of those individual interrupt
 	 * sources. To determine the possible interrupt sources, just read the
 	 * MISR* register and use it directly to know which interrupts have
 	 * been enabled previously or not.
 	 */
 	irq_status = phy_read(phydev, MII_DP83822_MISR1);
 	if (irq_status < 0) {
 		phy_error(phydev);
 		return IRQ_NONE;
 	}
 	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
 		trigger_machine = true;

 	irq_status = phy_read(phydev, MII_DP83822_MISR2);
 	if (irq_status < 0) {
 		phy_error(phydev);
 		return IRQ_NONE;
 	}
 	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
 		trigger_machine = true;

 	if (!trigger_machine)
 		return IRQ_NONE;

 	phy_trigger_machine(phydev);

 	return IRQ_HANDLED;
 }

 static int dp8382x_disable_wol(struct phy_device *phydev)
 {
 	return phy_clear_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
 				  DP83822_WOL_EN | DP83822_WOL_MAGIC_EN |
 				  DP83822_WOL_SECURE_ON);
 }

 static int dp83822_read_status(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822 = phydev->priv;
 	int status = phy_read(phydev, MII_DP83822_PHYSTS);
 	int ctrl2;
 	int ret;

 	if (dp83822->fx_enabled) {
 		if (status & DP83822_PHYSTS_LINK) {
 			phydev->speed = SPEED_UNKNOWN;
 			phydev->duplex = DUPLEX_UNKNOWN;
 		} else {
 			ctrl2 = phy_read(phydev, MII_DP83822_CTRL_2);
 			if (ctrl2 < 0)
 				return ctrl2;

 			if (!(ctrl2 & DP83822_FX_ENABLE)) {
 				ret = phy_write(phydev, MII_DP83822_CTRL_2,
 						DP83822_FX_ENABLE | ctrl2);
 				if (ret < 0)
 					return ret;
 			}
 		}
 	}

 	ret = genphy_read_status(phydev);
 	if (ret)
 		return ret;

 	if (status < 0)
 		return status;

 	if (status & DP83822_PHYSTS_DUPLEX)
 		phydev->duplex = DUPLEX_FULL;
 	else
 		phydev->duplex = DUPLEX_HALF;

 	if (status & DP83822_PHYSTS_10)
 		phydev->speed = SPEED_10;
 	else
 		phydev->speed = SPEED_100;

 	return 0;
 }

 static int dp83822_config_init(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822 = phydev->priv;
 	struct device *dev = &phydev->mdio.dev;
 	int rgmii_delay;
 	s32 rx_int_delay;
 	s32 tx_int_delay;
 	int err = 0;
 	int bmcr;

 	if (phy_interface_is_rgmii(phydev)) {
 		rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
 						      true);

 		if (rx_int_delay <= 0)
 			rgmii_delay = 0;
 		else
 			rgmii_delay = DP83822_RX_CLK_SHIFT;

 		tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
 						      false);
 		if (tx_int_delay <= 0)
 			rgmii_delay &= ~DP83822_TX_CLK_SHIFT;
 		else
 			rgmii_delay |= DP83822_TX_CLK_SHIFT;

 		if (rgmii_delay) {
 			err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
 					       MII_DP83822_RCSR, rgmii_delay);
 			if (err)
 				return err;
 		}
 	}

 	if (dp83822->fx_enabled) {
 		err = phy_modify(phydev, MII_DP83822_CTRL_2,
 				 DP83822_FX_ENABLE, 1);
 		if (err < 0)
 			return err;

 		/* Only allow advertising what this PHY supports */
 		linkmode_and(phydev->advertising, phydev->advertising,
 			     phydev->supported);

 		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
 				 phydev->supported);
 		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
 				 phydev->advertising);
 		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT,
 				 phydev->supported);
 		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT,
 				 phydev->supported);
 		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT,
 				 phydev->advertising);
 		linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT,
 				 phydev->advertising);

 		/* Auto neg is not supported in fiber mode */
 		bmcr = phy_read(phydev, MII_BMCR);
 		if (bmcr < 0)
 			return bmcr;

 		if (bmcr & BMCR_ANENABLE) {
 			err =  phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
 			if (err < 0)
 				return err;
 		}
 		phydev->autoneg = AUTONEG_DISABLE;
 		linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
 				   phydev->supported);
 		linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
 				   phydev->advertising);

 		/* Setup fiber advertisement */
 		err = phy_modify_changed(phydev, MII_ADVERTISE,
 					 MII_DP83822_FIBER_ADVERTISE,
 					 MII_DP83822_FIBER_ADVERTISE);

 		if (err < 0)
 			return err;

 		if (dp83822->fx_signal_det_low) {
 			err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
 					       MII_DP83822_GENCFG,
 					       DP83822_SIG_DET_LOW);
 			if (err)
 				return err;
 		}
 	}
 	return dp8382x_disable_wol(phydev);
 }

 static int dp8382x_config_init(struct phy_device *phydev)
 {
 	return dp8382x_disable_wol(phydev);
 }

 static int dp83822_phy_reset(struct phy_device *phydev)
 {
 	int err;

 	err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_SW_RESET);
 	if (err < 0)
 		return err;

 	return phydev->drv->config_init(phydev);
 }

 #ifdef CONFIG_OF_MDIO
 static int dp83822_of_init(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822 = phydev->priv;
 	struct device *dev = &phydev->mdio.dev;

 	/* Signal detection for the PHY is only enabled if the FX_EN and the
 	 * SD_EN pins are strapped. Signal detection can only enabled if FX_EN
 	 * is strapped otherwise signal detection is disabled for the PHY.
 	 */
 	if (dp83822->fx_enabled && dp83822->fx_sd_enable)
 		dp83822->fx_signal_det_low = device_property_present(dev,
 								     "ti,link-loss-low");
 	if (!dp83822->fx_enabled)
 		dp83822->fx_enabled = device_property_present(dev,
 							      "ti,fiber-mode");

 	return 0;
 }
 #else
 static int dp83822_of_init(struct phy_device *phydev)
 {
 	return 0;
 }
 #endif /* CONFIG_OF_MDIO */

 static int dp83822_read_straps(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822 = phydev->priv;
 	int fx_enabled, fx_sd_enable;
 	int val;

 	val = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_SOR1);
 	if (val < 0)
 		return val;

 	fx_enabled = (val & DP83822_COL_STRAP_MASK) >> DP83822_COL_SHIFT;
 	if (fx_enabled == DP83822_STRAP_MODE2 ||
 	    fx_enabled == DP83822_STRAP_MODE3)
 		dp83822->fx_enabled = 1;

 	if (dp83822->fx_enabled) {
 		fx_sd_enable = (val & DP83822_RX_ER_STR_MASK) >> DP83822_RX_ER_SHIFT;
 		if (fx_sd_enable == DP83822_STRAP_MODE3 ||
 		    fx_sd_enable == DP83822_STRAP_MODE4)
 			dp83822->fx_sd_enable = 1;
 	}

 	return 0;
 }

 static int dp83822_probe(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822;
 	int ret;

 	dp83822 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83822),
 			       GFP_KERNEL);
 	if (!dp83822)
 		return -ENOMEM;

 	phydev->priv = dp83822;

 	ret = dp83822_read_straps(phydev);
 	if (ret)
 		return ret;

 	dp83822_of_init(phydev);

 	if (dp83822->fx_enabled)
 		phydev->port = PORT_FIBRE;

 	return 0;
 }

 static int dp83822_suspend(struct phy_device *phydev)
 {
 	int value;

 	value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);

 	if (!(value & DP83822_WOL_EN))
 		genphy_suspend(phydev);

 	return 0;
 }

 static int dp83822_resume(struct phy_device *phydev)
 {
 	int value;

 	genphy_resume(phydev);

 	value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);

 	phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, value |
 		      DP83822_WOL_CLR_INDICATION);

 	return 0;
 }

 #define DP83822_PHY_DRIVER(_id, _name)				\
 	{							\
 		PHY_ID_MATCH_MODEL(_id),			\
 		.name		= (_name),			\
 		/* PHY_BASIC_FEATURES */			\
 		.probe          = dp83822_probe,		\
 		.soft_reset	= dp83822_phy_reset,		\
 		.config_init	= dp83822_config_init,		\
 		.read_status	= dp83822_read_status,		\
 		.get_wol = dp83822_get_wol,			\
 		.set_wol = dp83822_set_wol,			\
 		.config_intr = dp83822_config_intr,		\
 		.handle_interrupt = dp83822_handle_interrupt,	\
 		.suspend = dp83822_suspend,			\
 		.resume = dp83822_resume,			\
 	}

 #define DP8382X_PHY_DRIVER(_id, _name)				\
 	{							\
 		PHY_ID_MATCH_MODEL(_id),			\
 		.name		= (_name),			\
 		/* PHY_BASIC_FEATURES */			\
 		.soft_reset	= dp83822_phy_reset,		\
 		.config_init	= dp8382x_config_init,		\
 		.get_wol = dp83822_get_wol,			\
 		.set_wol = dp83822_set_wol,			\
 		.config_intr = dp83822_config_intr,		\
 		.handle_interrupt = dp83822_handle_interrupt,	\
 		.suspend = dp83822_suspend,			\
 		.resume = dp83822_resume,			\
 	}

 static struct phy_driver dp83822_driver[] = {
 	DP83822_PHY_DRIVER(DP83822_PHY_ID, "TI DP83822"),
 	DP8382X_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
 	DP8382X_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
 	DP8382X_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
 	DP8382X_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"),
 	DP8382X_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"),
 	DP8382X_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"),
 };
 module_phy_driver(dp83822_driver);

 static struct mdio_device_id __maybe_unused dp83822_tbl[] = {
 	{ DP83822_PHY_ID, 0xfffffff0 },
 	{ DP83825I_PHY_ID, 0xfffffff0 },
 	{ DP83826C_PHY_ID, 0xfffffff0 },
 	{ DP83826NC_PHY_ID, 0xfffffff0 },
 	{ DP83825S_PHY_ID, 0xfffffff0 },
 	{ DP83825CM_PHY_ID, 0xfffffff0 },
 	{ DP83825CS_PHY_ID, 0xfffffff0 },
 	{ },
 };
 MODULE_DEVICE_TABLE(mdio, dp83822_tbl);

 MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver");
 MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0
	/* Driver for the Texas Instruments DP83822, DP83825 and DP83826 PHYs.
	*
	* Copyright (C) 2017 Texas Instruments Inc.
	*/

	#include <linux/ethtool.h>
	#include <linux/etherdevice.h>
	#include <linux/kernel.h>
	#include <linux/mii.h>
	#include <linux/module.h>
	#include <linux/of.h>
	#include <linux/phy.h>
	#include <linux/netdevice.h>

	#define DP83822_PHY_ID 0x2000a240
	#define DP83825S_PHY_ID 0x2000a140
	#define DP83825I_PHY_ID 0x2000a150
	#define DP83825CM_PHY_ID 0x2000a160
	#define DP83825CS_PHY_ID 0x2000a170
	#define DP83826C_PHY_ID 0x2000a130
	#define DP83826NC_PHY_ID 0x2000a110

	#define DP83822_DEVADDR 0x1f

	#define MII_DP83822_CTRL_2 0x0a
	#define MII_DP83822_PHYSTS 0x10
	#define MII_DP83822_PHYSCR 0x11
	#define MII_DP83822_MISR1 0x12
	#define MII_DP83822_MISR2 0x13
	#define MII_DP83822_FCSCR 0x14
	#define MII_DP83822_RCSR 0x17
	#define MII_DP83822_RESET_CTRL 0x1f
	#define MII_DP83822_GENCFG 0x465
	#define MII_DP83822_SOR1 0x467

	/* GENCFG */
	#define DP83822_SIG_DET_LOW BIT(0)

	/* Control Register 2 bits */
	#define DP83822_FX_ENABLE BIT(14)

	#define DP83822_HW_RESET BIT(15)
	#define DP83822_SW_RESET BIT(14)

	/* PHY STS bits */
	#define DP83822_PHYSTS_DUPLEX BIT(2)
	#define DP83822_PHYSTS_10 BIT(1)
	#define DP83822_PHYSTS_LINK BIT(0)

	/* PHYSCR Register Fields */
	#define DP83822_PHYSCR_INT_OE BIT(0) /* Interrupt Output Enable */
	#define DP83822_PHYSCR_INTEN BIT(1) /* Interrupt Enable */

	/* MISR1 bits */
	#define DP83822_RX_ERR_HF_INT_EN BIT(0)
	#define DP83822_FALSE_CARRIER_HF_INT_EN BIT(1)
	#define DP83822_ANEG_COMPLETE_INT_EN BIT(2)
	#define DP83822_DUP_MODE_CHANGE_INT_EN BIT(3)
	#define DP83822_SPEED_CHANGED_INT_EN BIT(4)
	#define DP83822_LINK_STAT_INT_EN BIT(5)
	#define DP83822_ENERGY_DET_INT_EN BIT(6)
	#define DP83822_LINK_QUAL_INT_EN BIT(7)

	/* MISR2 bits */
	#define DP83822_JABBER_DET_INT_EN BIT(0)
	#define DP83822_WOL_PKT_INT_EN BIT(1)
	#define DP83822_SLEEP_MODE_INT_EN BIT(2)
	#define DP83822_MDI_XOVER_INT_EN BIT(3)
	#define DP83822_LB_FIFO_INT_EN BIT(4)
	#define DP83822_PAGE_RX_INT_EN BIT(5)
	#define DP83822_ANEG_ERR_INT_EN BIT(6)
	#define DP83822_EEE_ERROR_CHANGE_INT_EN BIT(7)

	/* INT_STAT1 bits */
	#define DP83822_WOL_INT_EN BIT(4)
	#define DP83822_WOL_INT_STAT BIT(12)

	#define MII_DP83822_RXSOP1 0x04a5
	#define MII_DP83822_RXSOP2 0x04a6
	#define MII_DP83822_RXSOP3 0x04a7

	/* WoL Registers */
	#define MII_DP83822_WOL_CFG 0x04a0
	#define MII_DP83822_WOL_STAT 0x04a1
	#define MII_DP83822_WOL_DA1 0x04a2
	#define MII_DP83822_WOL_DA2 0x04a3
	#define MII_DP83822_WOL_DA3 0x04a4

	/* WoL bits */
	#define DP83822_WOL_MAGIC_EN BIT(0)
	#define DP83822_WOL_SECURE_ON BIT(5)
	#define DP83822_WOL_EN BIT(7)
	#define DP83822_WOL_INDICATION_SEL BIT(8)
	#define DP83822_WOL_CLR_INDICATION BIT(11)

	/* RSCR bits */
	#define DP83822_RX_CLK_SHIFT BIT(12)
	#define DP83822_TX_CLK_SHIFT BIT(11)

	/* SOR1 mode */
	#define DP83822_STRAP_MODE1 0
	#define DP83822_STRAP_MODE2 BIT(0)
	#define DP83822_STRAP_MODE3 BIT(1)
	#define DP83822_STRAP_MODE4 GENMASK(1, 0)

	#define DP83822_COL_STRAP_MASK GENMASK(11, 10)
	#define DP83822_COL_SHIFT 10
	#define DP83822_RX_ER_STR_MASK GENMASK(9, 8)
	#define DP83822_RX_ER_SHIFT 8

	#define MII_DP83822_FIBER_ADVERTISE (ADVERTISED_TP \| ADVERTISED_MII \| \
	ADVERTISED_FIBRE \| \
	ADVERTISED_Pause \| ADVERTISED_Asym_Pause)

	struct dp83822_private {
	bool fx_signal_det_low;
	int fx_enabled;
	u16 fx_sd_enable;
	};

	static int dp83822_set_wol(struct phy_device *phydev,
	struct ethtool_wolinfo *wol)
	{
	struct net_device *ndev = phydev->attached_dev;
	u16 value;
	const u8 *mac;

	if (wol->wolopts & (WAKE_MAGIC \| WAKE_MAGICSECURE)) {
	mac = (const u8 *)ndev->dev_addr;

	if (!is_valid_ether_addr(mac))
	return -EINVAL;

	/* MAC addresses start with byte 5, but stored in mac[0].
	* 822 PHYs store bytes 4\|5, 2\|3, 0\|1
	*/
	phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA1,
	(mac[1] << 8) \| mac[0]);
	phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA2,
	(mac[3] << 8) \| mac[2]);
	phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_DA3,
	(mac[5] << 8) \| mac[4]);

	value = phy_read_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_WOL_CFG);
	if (wol->wolopts & WAKE_MAGIC)
	value \|= DP83822_WOL_MAGIC_EN;
	else
	value &= ~DP83822_WOL_MAGIC_EN;

	if (wol->wolopts & WAKE_MAGICSECURE) {
	phy_write_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_RXSOP1,
	(wol->sopass[1] << 8) \| wol->sopass[0]);
	phy_write_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_RXSOP2,
	(wol->sopass[3] << 8) \| wol->sopass[2]);
	phy_write_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_RXSOP3,
	(wol->sopass[5] << 8) \| wol->sopass[4]);
	value \|= DP83822_WOL_SECURE_ON;
	} else {
	value &= ~DP83822_WOL_SECURE_ON;
	}

	/* Clear any pending WoL interrupt */
	phy_read(phydev, MII_DP83822_MISR2);

	value \|= DP83822_WOL_EN \| DP83822_WOL_INDICATION_SEL \|
	DP83822_WOL_CLR_INDICATION;

	return phy_write_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_WOL_CFG, value);
	} else {
	return phy_clear_bits_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_WOL_CFG, DP83822_WOL_EN);
	}
	}

	static void dp83822_get_wol(struct phy_device *phydev,
	struct ethtool_wolinfo *wol)
	{
	int value;
	u16 sopass_val;

	wol->supported = (WAKE_MAGIC \| WAKE_MAGICSECURE);
	wol->wolopts = 0;

	value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);

	if (value & DP83822_WOL_MAGIC_EN)
	wol->wolopts \|= WAKE_MAGIC;

	if (value & DP83822_WOL_SECURE_ON) {
	sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_RXSOP1);
	wol->sopass[0] = (sopass_val & 0xff);
	wol->sopass[1] = (sopass_val >> 8);

	sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_RXSOP2);
	wol->sopass[2] = (sopass_val & 0xff);
	wol->sopass[3] = (sopass_val >> 8);

	sopass_val = phy_read_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_RXSOP3);
	wol->sopass[4] = (sopass_val & 0xff);
	wol->sopass[5] = (sopass_val >> 8);

	wol->wolopts \|= WAKE_MAGICSECURE;
	}

	/* WoL is not enabled so set wolopts to 0 */
	if (!(value & DP83822_WOL_EN))
	wol->wolopts = 0;
	}

	static int dp83822_config_intr(struct phy_device *phydev)
	{
	struct dp83822_private *dp83822 = phydev->priv;
	int misr_status;
	int physcr_status;
	int err;

	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
	misr_status = phy_read(phydev, MII_DP83822_MISR1);
	if (misr_status < 0)
	return misr_status;

	misr_status \|= (DP83822_RX_ERR_HF_INT_EN \|
	DP83822_FALSE_CARRIER_HF_INT_EN \|
	DP83822_LINK_STAT_INT_EN \|
	DP83822_ENERGY_DET_INT_EN \|
	DP83822_LINK_QUAL_INT_EN);

	if (!dp83822->fx_enabled)
	misr_status \|= DP83822_ANEG_COMPLETE_INT_EN \|
	DP83822_DUP_MODE_CHANGE_INT_EN \|
	DP83822_SPEED_CHANGED_INT_EN;


	err = phy_write(phydev, MII_DP83822_MISR1, misr_status);
	if (err < 0)
	return err;

	misr_status = phy_read(phydev, MII_DP83822_MISR2);
	if (misr_status < 0)
	return misr_status;

	misr_status \|= (DP83822_JABBER_DET_INT_EN \|
	DP83822_SLEEP_MODE_INT_EN \|
	DP83822_LB_FIFO_INT_EN \|
	DP83822_PAGE_RX_INT_EN \|
	DP83822_EEE_ERROR_CHANGE_INT_EN);

	if (!dp83822->fx_enabled)
	misr_status \|= DP83822_MDI_XOVER_INT_EN \|
	DP83822_ANEG_ERR_INT_EN \|
	DP83822_WOL_PKT_INT_EN;

	err = phy_write(phydev, MII_DP83822_MISR2, misr_status);
	if (err < 0)
	return err;

	physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
	if (physcr_status < 0)
	return physcr_status;

	physcr_status \|= DP83822_PHYSCR_INT_OE \| DP83822_PHYSCR_INTEN;

	} else {
	err = phy_write(phydev, MII_DP83822_MISR1, 0);
	if (err < 0)
	return err;

	err = phy_write(phydev, MII_DP83822_MISR2, 0);
	if (err < 0)
	return err;

	physcr_status = phy_read(phydev, MII_DP83822_PHYSCR);
	if (physcr_status < 0)
	return physcr_status;

	physcr_status &= ~DP83822_PHYSCR_INTEN;
	}

	return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
	}

	static irqreturn_t dp83822_handle_interrupt(struct phy_device *phydev)
	{
	bool trigger_machine = false;
	int irq_status;

	/* The MISR1 and MISR2 registers are holding the interrupt status in
	* the upper half (15:8), while the lower half (7:0) is used for
	* controlling the interrupt enable state of those individual interrupt
	* sources. To determine the possible interrupt sources, just read the
	* MISR* register and use it directly to know which interrupts have
	* been enabled previously or not.
	*/
	irq_status = phy_read(phydev, MII_DP83822_MISR1);
	if (irq_status < 0) {
	phy_error(phydev);
	return IRQ_NONE;
	}
	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
	trigger_machine = true;

	irq_status = phy_read(phydev, MII_DP83822_MISR2);
	if (irq_status < 0) {
	phy_error(phydev);
	return IRQ_NONE;
	}
	if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
	trigger_machine = true;

	if (!trigger_machine)
	return IRQ_NONE;

	phy_trigger_machine(phydev);

	return IRQ_HANDLED;
	}

	static int dp8382x_disable_wol(struct phy_device *phydev)
	{
	return phy_clear_bits_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG,
	DP83822_WOL_EN \| DP83822_WOL_MAGIC_EN \|
	DP83822_WOL_SECURE_ON);
	}

	static int dp83822_read_status(struct phy_device *phydev)
	{
	struct dp83822_private *dp83822 = phydev->priv;
	int status = phy_read(phydev, MII_DP83822_PHYSTS);
	int ctrl2;
	int ret;

	if (dp83822->fx_enabled) {
	if (status & DP83822_PHYSTS_LINK) {
	phydev->speed = SPEED_UNKNOWN;
	phydev->duplex = DUPLEX_UNKNOWN;
	} else {
	ctrl2 = phy_read(phydev, MII_DP83822_CTRL_2);
	if (ctrl2 < 0)
	return ctrl2;

	if (!(ctrl2 & DP83822_FX_ENABLE)) {
	ret = phy_write(phydev, MII_DP83822_CTRL_2,
	DP83822_FX_ENABLE \| ctrl2);
	if (ret < 0)
	return ret;
	}
	}
	}

	ret = genphy_read_status(phydev);
	if (ret)
	return ret;

	if (status < 0)
	return status;

	if (status & DP83822_PHYSTS_DUPLEX)
	phydev->duplex = DUPLEX_FULL;
	else
	phydev->duplex = DUPLEX_HALF;

	if (status & DP83822_PHYSTS_10)
	phydev->speed = SPEED_10;
	else
	phydev->speed = SPEED_100;

	return 0;
	}

	static int dp83822_config_init(struct phy_device *phydev)
	{
	struct dp83822_private *dp83822 = phydev->priv;
	struct device *dev = &phydev->mdio.dev;
	int rgmii_delay;
	s32 rx_int_delay;
	s32 tx_int_delay;
	int err = 0;
	int bmcr;

	if (phy_interface_is_rgmii(phydev)) {
	rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
	true);

	if (rx_int_delay <= 0)
	rgmii_delay = 0;
	else
	rgmii_delay = DP83822_RX_CLK_SHIFT;

	tx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
	false);
	if (tx_int_delay <= 0)
	rgmii_delay &= ~DP83822_TX_CLK_SHIFT;
	else
	rgmii_delay \|= DP83822_TX_CLK_SHIFT;

	if (rgmii_delay) {
	err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_RCSR, rgmii_delay);
	if (err)
	return err;
	}
	}

	if (dp83822->fx_enabled) {
	err = phy_modify(phydev, MII_DP83822_CTRL_2,
	DP83822_FX_ENABLE, 1);
	if (err < 0)
	return err;

	/* Only allow advertising what this PHY supports */
	linkmode_and(phydev->advertising, phydev->advertising,
	phydev->supported);

	linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
	phydev->supported);
	linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT,
	phydev->advertising);
	linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT,
	phydev->supported);
	linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT,
	phydev->supported);
	linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT,
	phydev->advertising);
	linkmode_set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT,
	phydev->advertising);

	/* Auto neg is not supported in fiber mode */
	bmcr = phy_read(phydev, MII_BMCR);
	if (bmcr < 0)
	return bmcr;

	if (bmcr & BMCR_ANENABLE) {
	err = phy_modify(phydev, MII_BMCR, BMCR_ANENABLE, 0);
	if (err < 0)
	return err;
	}
	phydev->autoneg = AUTONEG_DISABLE;
	linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
	phydev->supported);
	linkmode_clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
	phydev->advertising);

	/* Setup fiber advertisement */
	err = phy_modify_changed(phydev, MII_ADVERTISE,
	MII_DP83822_FIBER_ADVERTISE,
	MII_DP83822_FIBER_ADVERTISE);

	if (err < 0)
	return err;

	if (dp83822->fx_signal_det_low) {
	err = phy_set_bits_mmd(phydev, DP83822_DEVADDR,
	MII_DP83822_GENCFG,
	DP83822_SIG_DET_LOW);
	if (err)
	return err;
	}
	}
	return dp8382x_disable_wol(phydev);
	}

	static int dp8382x_config_init(struct phy_device *phydev)
	{
	return dp8382x_disable_wol(phydev);
	}

	static int dp83822_phy_reset(struct phy_device *phydev)
	{
	int err;

	err = phy_write(phydev, MII_DP83822_RESET_CTRL, DP83822_SW_RESET);
	if (err < 0)
	return err;

	return phydev->drv->config_init(phydev);
	}

	#ifdef CONFIG_OF_MDIO
	static int dp83822_of_init(struct phy_device *phydev)
	{
	struct dp83822_private *dp83822 = phydev->priv;
	struct device *dev = &phydev->mdio.dev;

	/* Signal detection for the PHY is only enabled if the FX_EN and the
	* SD_EN pins are strapped. Signal detection can only enabled if FX_EN
	* is strapped otherwise signal detection is disabled for the PHY.
	*/
	if (dp83822->fx_enabled && dp83822->fx_sd_enable)
	dp83822->fx_signal_det_low = device_property_present(dev,
	"ti,link-loss-low");
	if (!dp83822->fx_enabled)
	dp83822->fx_enabled = device_property_present(dev,
	"ti,fiber-mode");

	return 0;
	}
	#else
	static int dp83822_of_init(struct phy_device *phydev)
	{
	return 0;
	}
	#endif /* CONFIG_OF_MDIO */

	static int dp83822_read_straps(struct phy_device *phydev)
	{
	struct dp83822_private *dp83822 = phydev->priv;
	int fx_enabled, fx_sd_enable;
	int val;

	val = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_SOR1);
	if (val < 0)
	return val;

	fx_enabled = (val & DP83822_COL_STRAP_MASK) >> DP83822_COL_SHIFT;
	if (fx_enabled == DP83822_STRAP_MODE2 \|\|
	fx_enabled == DP83822_STRAP_MODE3)
	dp83822->fx_enabled = 1;

	if (dp83822->fx_enabled) {
	fx_sd_enable = (val & DP83822_RX_ER_STR_MASK) >> DP83822_RX_ER_SHIFT;
	if (fx_sd_enable == DP83822_STRAP_MODE3 \|\|
	fx_sd_enable == DP83822_STRAP_MODE4)
	dp83822->fx_sd_enable = 1;
	}

	return 0;
	}

	static int dp83822_probe(struct phy_device *phydev)
	{
	struct dp83822_private *dp83822;
	int ret;

	dp83822 = devm_kzalloc(&phydev->mdio.dev, sizeof(*dp83822),
	GFP_KERNEL);
	if (!dp83822)
	return -ENOMEM;

	phydev->priv = dp83822;

	ret = dp83822_read_straps(phydev);
	if (ret)
	return ret;

	dp83822_of_init(phydev);

	if (dp83822->fx_enabled)
	phydev->port = PORT_FIBRE;

	return 0;
	}

	static int dp83822_suspend(struct phy_device *phydev)
	{
	int value;

	value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);

	if (!(value & DP83822_WOL_EN))
	genphy_suspend(phydev);

	return 0;
	}

	static int dp83822_resume(struct phy_device *phydev)
	{
	int value;

	genphy_resume(phydev);

	value = phy_read_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG);

	phy_write_mmd(phydev, DP83822_DEVADDR, MII_DP83822_WOL_CFG, value \|
	DP83822_WOL_CLR_INDICATION);

	return 0;
	}

	#define DP83822_PHY_DRIVER(_id, _name) \
	{ \
	PHY_ID_MATCH_MODEL(_id), \
	.name = (_name), \
	/* PHY_BASIC_FEATURES */ \
	.probe = dp83822_probe, \
	.soft_reset = dp83822_phy_reset, \
	.config_init = dp83822_config_init, \
	.read_status = dp83822_read_status, \
	.get_wol = dp83822_get_wol, \
	.set_wol = dp83822_set_wol, \
	.config_intr = dp83822_config_intr, \
	.handle_interrupt = dp83822_handle_interrupt, \
	.suspend = dp83822_suspend, \
	.resume = dp83822_resume, \
	}

	#define DP8382X_PHY_DRIVER(_id, _name) \
	{ \
	PHY_ID_MATCH_MODEL(_id), \
	.name = (_name), \
	/* PHY_BASIC_FEATURES */ \
	.soft_reset = dp83822_phy_reset, \
	.config_init = dp8382x_config_init, \
	.get_wol = dp83822_get_wol, \
	.set_wol = dp83822_set_wol, \
	.config_intr = dp83822_config_intr, \
	.handle_interrupt = dp83822_handle_interrupt, \
	.suspend = dp83822_suspend, \
	.resume = dp83822_resume, \
	}

	static struct phy_driver dp83822_driver[] = {
	DP83822_PHY_DRIVER(DP83822_PHY_ID, "TI DP83822"),
	DP8382X_PHY_DRIVER(DP83825I_PHY_ID, "TI DP83825I"),
	DP8382X_PHY_DRIVER(DP83826C_PHY_ID, "TI DP83826C"),
	DP8382X_PHY_DRIVER(DP83826NC_PHY_ID, "TI DP83826NC"),
	DP8382X_PHY_DRIVER(DP83825S_PHY_ID, "TI DP83825S"),
	DP8382X_PHY_DRIVER(DP83825CM_PHY_ID, "TI DP83825M"),
	DP8382X_PHY_DRIVER(DP83825CS_PHY_ID, "TI DP83825CS"),
	};
	module_phy_driver(dp83822_driver);

	static struct mdio_device_id __maybe_unused dp83822_tbl[] = {
	{ DP83822_PHY_ID, 0xfffffff0 },
	{ DP83825I_PHY_ID, 0xfffffff0 },
	{ DP83826C_PHY_ID, 0xfffffff0 },
	{ DP83826NC_PHY_ID, 0xfffffff0 },
	{ DP83825S_PHY_ID, 0xfffffff0 },
	{ DP83825CM_PHY_ID, 0xfffffff0 },
	{ DP83825CS_PHY_ID, 0xfffffff0 },
	{ },
	};
	MODULE_DEVICE_TABLE(mdio, dp83822_tbl);

	MODULE_DESCRIPTION("Texas Instruments DP83822 PHY driver");
	MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com");
	MODULE_LICENSE("GPL v2");