| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Kernel Probes Jump Optimization (Optprobes) |
| * |
| * Copyright (C) IBM Corporation, 2002, 2004 |
| * Copyright (C) Hitachi Ltd., 2012 |
| */ |
| #include <linux/kprobes.h> |
| #include <linux/perf_event.h> |
| #include <linux/ptrace.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/hardirq.h> |
| #include <linux/preempt.h> |
| #include <linux/extable.h> |
| #include <linux/kdebug.h> |
| #include <linux/kallsyms.h> |
| #include <linux/ftrace.h> |
| #include <linux/objtool.h> |
| #include <linux/pgtable.h> |
| #include <linux/static_call.h> |
| |
| #include <asm/text-patching.h> |
| #include <asm/cacheflush.h> |
| #include <asm/desc.h> |
| #include <linux/uaccess.h> |
| #include <asm/alternative.h> |
| #include <asm/insn.h> |
| #include <asm/debugreg.h> |
| #include <asm/set_memory.h> |
| #include <asm/sections.h> |
| #include <asm/nospec-branch.h> |
| |
| #include "common.h" |
| |
| unsigned long __recover_optprobed_insn(kprobe_opcode_t *buf, unsigned long addr) |
| { |
| struct optimized_kprobe *op; |
| struct kprobe *kp; |
| long offs; |
| int i; |
| |
| for (i = 0; i < JMP32_INSN_SIZE; i++) { |
| kp = get_kprobe((void *)addr - i); |
| /* This function only handles jump-optimized kprobe */ |
| if (kp && kprobe_optimized(kp)) { |
| op = container_of(kp, struct optimized_kprobe, kp); |
| /* If op->list is not empty, op is under optimizing */ |
| if (list_empty(&op->list)) |
| goto found; |
| } |
| } |
| |
| return addr; |
| found: |
| /* |
| * If the kprobe can be optimized, original bytes which can be |
| * overwritten by jump destination address. In this case, original |
| * bytes must be recovered from op->optinsn.copied_insn buffer. |
| */ |
| if (copy_from_kernel_nofault(buf, (void *)addr, |
| MAX_INSN_SIZE * sizeof(kprobe_opcode_t))) |
| return 0UL; |
| |
| if (addr == (unsigned long)kp->addr) { |
| buf[0] = kp->opcode; |
| memcpy(buf + 1, op->optinsn.copied_insn, DISP32_SIZE); |
| } else { |
| offs = addr - (unsigned long)kp->addr - 1; |
| memcpy(buf, op->optinsn.copied_insn + offs, DISP32_SIZE - offs); |
| } |
| |
| return (unsigned long)buf; |
| } |
| |
| static void synthesize_clac(kprobe_opcode_t *addr) |
| { |
| /* |
| * Can't be static_cpu_has() due to how objtool treats this feature bit. |
| * This isn't a fast path anyway. |
| */ |
| if (!boot_cpu_has(X86_FEATURE_SMAP)) |
| return; |
| |
| /* Replace the NOP3 with CLAC */ |
| addr[0] = 0x0f; |
| addr[1] = 0x01; |
| addr[2] = 0xca; |
| } |
| |
| /* Insert a move instruction which sets a pointer to eax/rdi (1st arg). */ |
| static void synthesize_set_arg1(kprobe_opcode_t *addr, unsigned long val) |
| { |
| #ifdef CONFIG_X86_64 |
| *addr++ = 0x48; |
| *addr++ = 0xbf; |
| #else |
| *addr++ = 0xb8; |
| #endif |
| *(unsigned long *)addr = val; |
| } |
| |
| asm ( |
| ".pushsection .rodata\n" |
| "optprobe_template_func:\n" |
| ".global optprobe_template_entry\n" |
| "optprobe_template_entry:\n" |
| #ifdef CONFIG_X86_64 |
| /* We don't bother saving the ss register */ |
| " pushq %rsp\n" |
| " pushfq\n" |
| ".global optprobe_template_clac\n" |
| "optprobe_template_clac:\n" |
| ASM_NOP3 |
| SAVE_REGS_STRING |
| " movq %rsp, %rsi\n" |
| ".global optprobe_template_val\n" |
| "optprobe_template_val:\n" |
| ASM_NOP5 |
| ASM_NOP5 |
| ".global optprobe_template_call\n" |
| "optprobe_template_call:\n" |
| ASM_NOP5 |
| /* Move flags to rsp */ |
| " movq 18*8(%rsp), %rdx\n" |
| " movq %rdx, 19*8(%rsp)\n" |
| RESTORE_REGS_STRING |
| /* Skip flags entry */ |
| " addq $8, %rsp\n" |
| " popfq\n" |
| #else /* CONFIG_X86_32 */ |
| " pushl %esp\n" |
| " pushfl\n" |
| ".global optprobe_template_clac\n" |
| "optprobe_template_clac:\n" |
| ASM_NOP3 |
| SAVE_REGS_STRING |
| " movl %esp, %edx\n" |
| ".global optprobe_template_val\n" |
| "optprobe_template_val:\n" |
| ASM_NOP5 |
| ".global optprobe_template_call\n" |
| "optprobe_template_call:\n" |
| ASM_NOP5 |
| /* Move flags into esp */ |
| " movl 14*4(%esp), %edx\n" |
| " movl %edx, 15*4(%esp)\n" |
| RESTORE_REGS_STRING |
| /* Skip flags entry */ |
| " addl $4, %esp\n" |
| " popfl\n" |
| #endif |
| ".global optprobe_template_end\n" |
| "optprobe_template_end:\n" |
| ".popsection\n"); |
| |
| void optprobe_template_func(void); |
| STACK_FRAME_NON_STANDARD(optprobe_template_func); |
| |
| #define TMPL_CLAC_IDX \ |
| ((long)optprobe_template_clac - (long)optprobe_template_entry) |
| #define TMPL_MOVE_IDX \ |
| ((long)optprobe_template_val - (long)optprobe_template_entry) |
| #define TMPL_CALL_IDX \ |
| ((long)optprobe_template_call - (long)optprobe_template_entry) |
| #define TMPL_END_IDX \ |
| ((long)optprobe_template_end - (long)optprobe_template_entry) |
| |
| /* Optimized kprobe call back function: called from optinsn */ |
| static void |
| optimized_callback(struct optimized_kprobe *op, struct pt_regs *regs) |
| { |
| /* This is possible if op is under delayed unoptimizing */ |
| if (kprobe_disabled(&op->kp)) |
| return; |
| |
| preempt_disable(); |
| if (kprobe_running()) { |
| kprobes_inc_nmissed_count(&op->kp); |
| } else { |
| struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); |
| /* Save skipped registers */ |
| regs->cs = __KERNEL_CS; |
| #ifdef CONFIG_X86_32 |
| regs->gs = 0; |
| #endif |
| regs->ip = (unsigned long)op->kp.addr + INT3_INSN_SIZE; |
| regs->orig_ax = ~0UL; |
| |
| __this_cpu_write(current_kprobe, &op->kp); |
| kcb->kprobe_status = KPROBE_HIT_ACTIVE; |
| opt_pre_handler(&op->kp, regs); |
| __this_cpu_write(current_kprobe, NULL); |
| } |
| preempt_enable(); |
| } |
| NOKPROBE_SYMBOL(optimized_callback); |
| |
| static int copy_optimized_instructions(u8 *dest, u8 *src, u8 *real) |
| { |
| struct insn insn; |
| int len = 0, ret; |
| |
| while (len < JMP32_INSN_SIZE) { |
| ret = __copy_instruction(dest + len, src + len, real + len, &insn); |
| if (!ret || !can_boost(&insn, src + len)) |
| return -EINVAL; |
| len += ret; |
| } |
| /* Check whether the address range is reserved */ |
| if (ftrace_text_reserved(src, src + len - 1) || |
| alternatives_text_reserved(src, src + len - 1) || |
| jump_label_text_reserved(src, src + len - 1) || |
| static_call_text_reserved(src, src + len - 1)) |
| return -EBUSY; |
| |
| return len; |
| } |
| |
| /* Check whether insn is indirect jump */ |
| static int __insn_is_indirect_jump(struct insn *insn) |
| { |
| return ((insn->opcode.bytes[0] == 0xff && |
| (X86_MODRM_REG(insn->modrm.value) & 6) == 4) || /* Jump */ |
| insn->opcode.bytes[0] == 0xea); /* Segment based jump */ |
| } |
| |
| /* Check whether insn jumps into specified address range */ |
| static int insn_jump_into_range(struct insn *insn, unsigned long start, int len) |
| { |
| unsigned long target = 0; |
| |
| switch (insn->opcode.bytes[0]) { |
| case 0xe0: /* loopne */ |
| case 0xe1: /* loope */ |
| case 0xe2: /* loop */ |
| case 0xe3: /* jcxz */ |
| case 0xe9: /* near relative jump */ |
| case 0xeb: /* short relative jump */ |
| break; |
| case 0x0f: |
| if ((insn->opcode.bytes[1] & 0xf0) == 0x80) /* jcc near */ |
| break; |
| return 0; |
| default: |
| if ((insn->opcode.bytes[0] & 0xf0) == 0x70) /* jcc short */ |
| break; |
| return 0; |
| } |
| target = (unsigned long)insn->next_byte + insn->immediate.value; |
| |
| return (start <= target && target <= start + len); |
| } |
| |
| static int insn_is_indirect_jump(struct insn *insn) |
| { |
| int ret = __insn_is_indirect_jump(insn); |
| |
| #ifdef CONFIG_RETPOLINE |
| /* |
| * Jump to x86_indirect_thunk_* is treated as an indirect jump. |
| * Note that even with CONFIG_RETPOLINE=y, the kernel compiled with |
| * older gcc may use indirect jump. So we add this check instead of |
| * replace indirect-jump check. |
| */ |
| if (!ret) |
| ret = insn_jump_into_range(insn, |
| (unsigned long)__indirect_thunk_start, |
| (unsigned long)__indirect_thunk_end - |
| (unsigned long)__indirect_thunk_start); |
| #endif |
| return ret; |
| } |
| |
| static bool is_padding_int3(unsigned long addr, unsigned long eaddr) |
| { |
| unsigned char ops; |
| |
| for (; addr < eaddr; addr++) { |
| if (get_kernel_nofault(ops, (void *)addr) < 0 || |
| ops != INT3_INSN_OPCODE) |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* Decode whole function to ensure any instructions don't jump into target */ |
| static int can_optimize(unsigned long paddr) |
| { |
| unsigned long addr, size = 0, offset = 0; |
| struct insn insn; |
| kprobe_opcode_t buf[MAX_INSN_SIZE]; |
| |
| /* Lookup symbol including addr */ |
| if (!kallsyms_lookup_size_offset(paddr, &size, &offset)) |
| return 0; |
| |
| /* |
| * Do not optimize in the entry code due to the unstable |
| * stack handling and registers setup. |
| */ |
| if (((paddr >= (unsigned long)__entry_text_start) && |
| (paddr < (unsigned long)__entry_text_end))) |
| return 0; |
| |
| /* Check there is enough space for a relative jump. */ |
| if (size - offset < JMP32_INSN_SIZE) |
| return 0; |
| |
| /* Decode instructions */ |
| addr = paddr - offset; |
| while (addr < paddr - offset + size) { /* Decode until function end */ |
| unsigned long recovered_insn; |
| int ret; |
| |
| if (search_exception_tables(addr)) |
| /* |
| * Since some fixup code will jumps into this function, |
| * we can't optimize kprobe in this function. |
| */ |
| return 0; |
| recovered_insn = recover_probed_instruction(buf, addr); |
| if (!recovered_insn) |
| return 0; |
| |
| ret = insn_decode_kernel(&insn, (void *)recovered_insn); |
| if (ret < 0) |
| return 0; |
| |
| /* |
| * In the case of detecting unknown breakpoint, this could be |
| * a padding INT3 between functions. Let's check that all the |
| * rest of the bytes are also INT3. |
| */ |
| if (insn.opcode.bytes[0] == INT3_INSN_OPCODE) |
| return is_padding_int3(addr, paddr - offset + size) ? 1 : 0; |
| |
| /* Recover address */ |
| insn.kaddr = (void *)addr; |
| insn.next_byte = (void *)(addr + insn.length); |
| /* Check any instructions don't jump into target */ |
| if (insn_is_indirect_jump(&insn) || |
| insn_jump_into_range(&insn, paddr + INT3_INSN_SIZE, |
| DISP32_SIZE)) |
| return 0; |
| addr += insn.length; |
| } |
| |
| return 1; |
| } |
| |
| /* Check optimized_kprobe can actually be optimized. */ |
| int arch_check_optimized_kprobe(struct optimized_kprobe *op) |
| { |
| int i; |
| struct kprobe *p; |
| |
| for (i = 1; i < op->optinsn.size; i++) { |
| p = get_kprobe(op->kp.addr + i); |
| if (p && !kprobe_disabled(p)) |
| return -EEXIST; |
| } |
| |
| return 0; |
| } |
| |
| /* Check the addr is within the optimized instructions. */ |
| int arch_within_optimized_kprobe(struct optimized_kprobe *op, |
| unsigned long addr) |
| { |
| return ((unsigned long)op->kp.addr <= addr && |
| (unsigned long)op->kp.addr + op->optinsn.size > addr); |
| } |
| |
| /* Free optimized instruction slot */ |
| static |
| void __arch_remove_optimized_kprobe(struct optimized_kprobe *op, int dirty) |
| { |
| u8 *slot = op->optinsn.insn; |
| if (slot) { |
| int len = TMPL_END_IDX + op->optinsn.size + JMP32_INSN_SIZE; |
| |
| /* Record the perf event before freeing the slot */ |
| if (dirty) |
| perf_event_text_poke(slot, slot, len, NULL, 0); |
| |
| free_optinsn_slot(slot, dirty); |
| op->optinsn.insn = NULL; |
| op->optinsn.size = 0; |
| } |
| } |
| |
| void arch_remove_optimized_kprobe(struct optimized_kprobe *op) |
| { |
| __arch_remove_optimized_kprobe(op, 1); |
| } |
| |
| /* |
| * Copy replacing target instructions |
| * Target instructions MUST be relocatable (checked inside) |
| * This is called when new aggr(opt)probe is allocated or reused. |
| */ |
| int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, |
| struct kprobe *__unused) |
| { |
| u8 *buf = NULL, *slot; |
| int ret, len; |
| long rel; |
| |
| if (!can_optimize((unsigned long)op->kp.addr)) |
| return -EILSEQ; |
| |
| buf = kzalloc(MAX_OPTINSN_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| op->optinsn.insn = slot = get_optinsn_slot(); |
| if (!slot) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* |
| * Verify if the address gap is in 2GB range, because this uses |
| * a relative jump. |
| */ |
| rel = (long)slot - (long)op->kp.addr + JMP32_INSN_SIZE; |
| if (abs(rel) > 0x7fffffff) { |
| ret = -ERANGE; |
| goto err; |
| } |
| |
| /* Copy arch-dep-instance from template */ |
| memcpy(buf, optprobe_template_entry, TMPL_END_IDX); |
| |
| /* Copy instructions into the out-of-line buffer */ |
| ret = copy_optimized_instructions(buf + TMPL_END_IDX, op->kp.addr, |
| slot + TMPL_END_IDX); |
| if (ret < 0) |
| goto err; |
| op->optinsn.size = ret; |
| len = TMPL_END_IDX + op->optinsn.size; |
| |
| synthesize_clac(buf + TMPL_CLAC_IDX); |
| |
| /* Set probe information */ |
| synthesize_set_arg1(buf + TMPL_MOVE_IDX, (unsigned long)op); |
| |
| /* Set probe function call */ |
| synthesize_relcall(buf + TMPL_CALL_IDX, |
| slot + TMPL_CALL_IDX, optimized_callback); |
| |
| /* Set returning jmp instruction at the tail of out-of-line buffer */ |
| synthesize_reljump(buf + len, slot + len, |
| (u8 *)op->kp.addr + op->optinsn.size); |
| len += JMP32_INSN_SIZE; |
| |
| /* |
| * Note len = TMPL_END_IDX + op->optinsn.size + JMP32_INSN_SIZE is also |
| * used in __arch_remove_optimized_kprobe(). |
| */ |
| |
| /* We have to use text_poke() for instruction buffer because it is RO */ |
| perf_event_text_poke(slot, NULL, 0, buf, len); |
| text_poke(slot, buf, len); |
| |
| ret = 0; |
| out: |
| kfree(buf); |
| return ret; |
| |
| err: |
| __arch_remove_optimized_kprobe(op, 0); |
| goto out; |
| } |
| |
| /* |
| * Replace breakpoints (INT3) with relative jumps (JMP.d32). |
| * Caller must call with locking kprobe_mutex and text_mutex. |
| * |
| * The caller will have installed a regular kprobe and after that issued |
| * syncrhonize_rcu_tasks(), this ensures that the instruction(s) that live in |
| * the 4 bytes after the INT3 are unused and can now be overwritten. |
| */ |
| void arch_optimize_kprobes(struct list_head *oplist) |
| { |
| struct optimized_kprobe *op, *tmp; |
| u8 insn_buff[JMP32_INSN_SIZE]; |
| |
| list_for_each_entry_safe(op, tmp, oplist, list) { |
| s32 rel = (s32)((long)op->optinsn.insn - |
| ((long)op->kp.addr + JMP32_INSN_SIZE)); |
| |
| WARN_ON(kprobe_disabled(&op->kp)); |
| |
| /* Backup instructions which will be replaced by jump address */ |
| memcpy(op->optinsn.copied_insn, op->kp.addr + INT3_INSN_SIZE, |
| DISP32_SIZE); |
| |
| insn_buff[0] = JMP32_INSN_OPCODE; |
| *(s32 *)(&insn_buff[1]) = rel; |
| |
| text_poke_bp(op->kp.addr, insn_buff, JMP32_INSN_SIZE, NULL); |
| |
| list_del_init(&op->list); |
| } |
| } |
| |
| /* |
| * Replace a relative jump (JMP.d32) with a breakpoint (INT3). |
| * |
| * After that, we can restore the 4 bytes after the INT3 to undo what |
| * arch_optimize_kprobes() scribbled. This is safe since those bytes will be |
| * unused once the INT3 lands. |
| */ |
| void arch_unoptimize_kprobe(struct optimized_kprobe *op) |
| { |
| u8 new[JMP32_INSN_SIZE] = { INT3_INSN_OPCODE, }; |
| u8 old[JMP32_INSN_SIZE]; |
| u8 *addr = op->kp.addr; |
| |
| memcpy(old, op->kp.addr, JMP32_INSN_SIZE); |
| memcpy(new + INT3_INSN_SIZE, |
| op->optinsn.copied_insn, |
| JMP32_INSN_SIZE - INT3_INSN_SIZE); |
| |
| text_poke(addr, new, INT3_INSN_SIZE); |
| text_poke_sync(); |
| text_poke(addr + INT3_INSN_SIZE, |
| new + INT3_INSN_SIZE, |
| JMP32_INSN_SIZE - INT3_INSN_SIZE); |
| text_poke_sync(); |
| |
| perf_event_text_poke(op->kp.addr, old, JMP32_INSN_SIZE, new, JMP32_INSN_SIZE); |
| } |
| |
| /* |
| * Recover original instructions and breakpoints from relative jumps. |
| * Caller must call with locking kprobe_mutex. |
| */ |
| extern void arch_unoptimize_kprobes(struct list_head *oplist, |
| struct list_head *done_list) |
| { |
| struct optimized_kprobe *op, *tmp; |
| |
| list_for_each_entry_safe(op, tmp, oplist, list) { |
| arch_unoptimize_kprobe(op); |
| list_move(&op->list, done_list); |
| } |
| } |
| |
| int setup_detour_execution(struct kprobe *p, struct pt_regs *regs, int reenter) |
| { |
| struct optimized_kprobe *op; |
| |
| if (p->flags & KPROBE_FLAG_OPTIMIZED) { |
| /* This kprobe is really able to run optimized path. */ |
| op = container_of(p, struct optimized_kprobe, kp); |
| /* Detour through copied instructions */ |
| regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX; |
| if (!reenter) |
| reset_current_kprobe(); |
| return 1; |
| } |
| return 0; |
| } |
| NOKPROBE_SYMBOL(setup_detour_execution); |