| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Driver for Renesas R-Car VIN |
| * |
| * Copyright (C) 2016 Renesas Electronics Corp. |
| * Copyright (C) 2011-2013 Renesas Solutions Corp. |
| * Copyright (C) 2013 Cogent Embedded, Inc., <source@cogentembedded.com> |
| * Copyright (C) 2008 Magnus Damm |
| * |
| * Based on the soc-camera rcar_vin driver |
| */ |
| |
| #ifndef __RCAR_VIN__ |
| #define __RCAR_VIN__ |
| |
| #include <linux/kref.h> |
| |
| #include <media/v4l2-async.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-dev.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-fwnode.h> |
| #include <media/videobuf2-v4l2.h> |
| |
| /* Number of HW buffers */ |
| #define HW_BUFFER_NUM 3 |
| |
| /* Address alignment mask for HW buffers */ |
| #define HW_BUFFER_MASK 0x7f |
| |
| /* Max number on VIN instances that can be in a system */ |
| #define RCAR_VIN_NUM 8 |
| |
| struct rvin_group; |
| |
| enum model_id { |
| RCAR_H1, |
| RCAR_M1, |
| RCAR_GEN2, |
| RCAR_GEN3, |
| }; |
| |
| enum rvin_csi_id { |
| RVIN_CSI20, |
| RVIN_CSI21, |
| RVIN_CSI40, |
| RVIN_CSI41, |
| RVIN_CSI_MAX, |
| }; |
| |
| /** |
| * enum rvin_dma_state - DMA states |
| * @STOPPED: No operation in progress |
| * @STARTING: Capture starting up |
| * @RUNNING: Operation in progress have buffers |
| * @STOPPING: Stopping operation |
| * @SUSPENDED: Capture is suspended |
| */ |
| enum rvin_dma_state { |
| STOPPED = 0, |
| STARTING, |
| RUNNING, |
| STOPPING, |
| SUSPENDED, |
| }; |
| |
| /** |
| * enum rvin_buffer_type |
| * |
| * Describes how a buffer is given to the hardware. To be able |
| * to capture SEQ_TB/BT it's needed to capture to the same vb2 |
| * buffer twice so the type of buffer needs to be kept. |
| * |
| * @FULL: One capture fills the whole vb2 buffer |
| * @HALF_TOP: One capture fills the top half of the vb2 buffer |
| * @HALF_BOTTOM: One capture fills the bottom half of the vb2 buffer |
| */ |
| enum rvin_buffer_type { |
| FULL, |
| HALF_TOP, |
| HALF_BOTTOM, |
| }; |
| |
| /** |
| * struct rvin_video_format - Data format stored in memory |
| * @fourcc: Pixelformat |
| * @bpp: Bytes per pixel |
| */ |
| struct rvin_video_format { |
| u32 fourcc; |
| u8 bpp; |
| }; |
| |
| /** |
| * struct rvin_parallel_entity - Parallel video input endpoint descriptor |
| * @asd: sub-device descriptor for async framework |
| * @subdev: subdevice matched using async framework |
| * @mbus_type: media bus type |
| * @bus: media bus parallel configuration |
| * @source_pad: source pad of remote subdevice |
| * @sink_pad: sink pad of remote subdevice |
| * |
| */ |
| struct rvin_parallel_entity { |
| struct v4l2_async_subdev *asd; |
| struct v4l2_subdev *subdev; |
| |
| enum v4l2_mbus_type mbus_type; |
| struct v4l2_fwnode_bus_parallel bus; |
| |
| unsigned int source_pad; |
| unsigned int sink_pad; |
| }; |
| |
| /** |
| * struct rvin_group_route - describes a route from a channel of a |
| * CSI-2 receiver to a VIN |
| * |
| * @csi: CSI-2 receiver ID. |
| * @channel: Output channel of the CSI-2 receiver. |
| * @vin: VIN ID. |
| * @mask: Bitmask of the different CHSEL register values that |
| * allow for a route from @csi + @chan to @vin. |
| * |
| * .. note:: |
| * Each R-Car CSI-2 receiver has four output channels facing the VIN |
| * devices, each channel can carry one CSI-2 Virtual Channel (VC). |
| * There is no correlation between channel number and CSI-2 VC. It's |
| * up to the CSI-2 receiver driver to configure which VC is output |
| * on which channel, the VIN devices only care about output channels. |
| * |
| * There are in some cases multiple CHSEL register settings which would |
| * allow for the same route from @csi + @channel to @vin. For example |
| * on R-Car H3 both the CHSEL values 0 and 3 allow for a route from |
| * CSI40/VC0 to VIN0. All possible CHSEL values for a route need to be |
| * recorded as a bitmask in @mask, in this example bit 0 and 3 should |
| * be set. |
| */ |
| struct rvin_group_route { |
| enum rvin_csi_id csi; |
| unsigned int channel; |
| unsigned int vin; |
| unsigned int mask; |
| }; |
| |
| /** |
| * struct rvin_info - Information about the particular VIN implementation |
| * @model: VIN model |
| * @use_mc: use media controller instead of controlling subdevice |
| * @nv12: support outputing NV12 pixel format |
| * @max_width: max input width the VIN supports |
| * @max_height: max input height the VIN supports |
| * @routes: list of possible routes from the CSI-2 recivers to |
| * all VINs. The list mush be NULL terminated. |
| */ |
| struct rvin_info { |
| enum model_id model; |
| bool use_mc; |
| bool nv12; |
| |
| unsigned int max_width; |
| unsigned int max_height; |
| const struct rvin_group_route *routes; |
| }; |
| |
| /** |
| * struct rvin_dev - Renesas VIN device structure |
| * @dev: (OF) device |
| * @base: device I/O register space remapped to virtual memory |
| * @info: info about VIN instance |
| * |
| * @vdev: V4L2 video device associated with VIN |
| * @v4l2_dev: V4L2 device |
| * @ctrl_handler: V4L2 control handler |
| * @notifier: V4L2 asynchronous subdevs notifier |
| * |
| * @parallel: parallel input subdevice descriptor |
| * |
| * @group: Gen3 CSI group |
| * @id: Gen3 group id for this VIN |
| * @pad: media pad for the video device entity |
| * |
| * @lock: protects @queue |
| * @queue: vb2 buffers queue |
| * @scratch: cpu address for scratch buffer |
| * @scratch_phys: physical address of the scratch buffer |
| * |
| * @qlock: protects @buf_hw, @buf_list, @sequence and @state |
| * @buf_hw: Keeps track of buffers given to HW slot |
| * @buf_list: list of queued buffers |
| * @sequence: V4L2 buffers sequence number |
| * @state: keeps track of operation state |
| * |
| * @is_csi: flag to mark the VIN as using a CSI-2 subdevice |
| * @chsel: Cached value of the current CSI-2 channel selection |
| * |
| * @mbus_code: media bus format code |
| * @format: active V4L2 pixel format |
| * |
| * @crop: active cropping |
| * @compose: active composing |
| * @src_rect: active size of the video source |
| * @std: active video standard of the video source |
| * |
| * @alpha: Alpha component to fill in for supported pixel formats |
| */ |
| struct rvin_dev { |
| struct device *dev; |
| void __iomem *base; |
| const struct rvin_info *info; |
| |
| struct video_device vdev; |
| struct v4l2_device v4l2_dev; |
| struct v4l2_ctrl_handler ctrl_handler; |
| struct v4l2_async_notifier notifier; |
| |
| struct rvin_parallel_entity parallel; |
| |
| struct rvin_group *group; |
| unsigned int id; |
| struct media_pad pad; |
| |
| struct mutex lock; |
| struct vb2_queue queue; |
| void *scratch; |
| dma_addr_t scratch_phys; |
| |
| spinlock_t qlock; |
| struct { |
| struct vb2_v4l2_buffer *buffer; |
| enum rvin_buffer_type type; |
| dma_addr_t phys; |
| } buf_hw[HW_BUFFER_NUM]; |
| struct list_head buf_list; |
| unsigned int sequence; |
| enum rvin_dma_state state; |
| |
| bool is_csi; |
| unsigned int chsel; |
| |
| u32 mbus_code; |
| struct v4l2_pix_format format; |
| |
| struct v4l2_rect crop; |
| struct v4l2_rect compose; |
| struct v4l2_rect src_rect; |
| v4l2_std_id std; |
| |
| unsigned int alpha; |
| }; |
| |
| #define vin_to_source(vin) ((vin)->parallel.subdev) |
| |
| /* Debug */ |
| #define vin_dbg(d, fmt, arg...) dev_dbg(d->dev, fmt, ##arg) |
| #define vin_info(d, fmt, arg...) dev_info(d->dev, fmt, ##arg) |
| #define vin_warn(d, fmt, arg...) dev_warn(d->dev, fmt, ##arg) |
| #define vin_err(d, fmt, arg...) dev_err(d->dev, fmt, ##arg) |
| |
| /** |
| * struct rvin_group - VIN CSI2 group information |
| * @refcount: number of VIN instances using the group |
| * |
| * @mdev: media device which represents the group |
| * |
| * @lock: protects the count, notifier, vin and csi members |
| * @count: number of enabled VIN instances found in DT |
| * @notifier: group notifier for CSI-2 async subdevices |
| * @vin: VIN instances which are part of the group |
| * @csi: array of pairs of fwnode and subdev pointers |
| * to all CSI-2 subdevices. |
| */ |
| struct rvin_group { |
| struct kref refcount; |
| |
| struct media_device mdev; |
| |
| struct mutex lock; |
| unsigned int count; |
| struct v4l2_async_notifier notifier; |
| struct rvin_dev *vin[RCAR_VIN_NUM]; |
| |
| struct { |
| struct v4l2_async_subdev *asd; |
| struct v4l2_subdev *subdev; |
| } csi[RVIN_CSI_MAX]; |
| }; |
| |
| int rvin_dma_register(struct rvin_dev *vin, int irq); |
| void rvin_dma_unregister(struct rvin_dev *vin); |
| |
| int rvin_v4l2_register(struct rvin_dev *vin); |
| void rvin_v4l2_unregister(struct rvin_dev *vin); |
| |
| const struct rvin_video_format *rvin_format_from_pixel(struct rvin_dev *vin, |
| u32 pixelformat); |
| |
| |
| /* Cropping, composing and scaling */ |
| void rvin_crop_scale_comp(struct rvin_dev *vin); |
| |
| int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel); |
| void rvin_set_alpha(struct rvin_dev *vin, unsigned int alpha); |
| |
| int rvin_start_streaming(struct rvin_dev *vin); |
| void rvin_stop_streaming(struct rvin_dev *vin); |
| |
| #endif |