| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * |
| * Copyright (C) 2007 Mike Isely <isely@pobox.com> |
| */ |
| |
| /* |
| |
| This source file should encompass ALL per-device type information for the |
| driver. To define a new device, add elements to the pvr2_device_table and |
| pvr2_device_desc structures. |
| |
| */ |
| |
| #include "pvrusb2-devattr.h" |
| #include <linux/usb.h> |
| #include <linux/module.h> |
| /* This is needed in order to pull in tuner type ids... */ |
| #include <linux/i2c.h> |
| #include <media/tuner.h> |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| #include "pvrusb2-hdw-internal.h" |
| #include "lgdt330x.h" |
| #include "s5h1409.h" |
| #include "s5h1411.h" |
| #include "tda10048.h" |
| #include "tda18271.h" |
| #include "tda8290.h" |
| #include "tuner-simple.h" |
| #include "si2157.h" |
| #include "lgdt3306a.h" |
| #include "si2168.h" |
| #endif |
| |
| |
| /*------------------------------------------------------------------------*/ |
| /* Hauppauge PVR-USB2 Model 29xxx */ |
| |
| static const struct pvr2_device_client_desc pvr2_cli_29xxx[] = { |
| { .module_id = PVR2_CLIENT_ID_SAA7115 }, |
| { .module_id = PVR2_CLIENT_ID_MSP3400 }, |
| { .module_id = PVR2_CLIENT_ID_TUNER }, |
| { .module_id = PVR2_CLIENT_ID_DEMOD }, |
| }; |
| |
| #define PVR2_FIRMWARE_29xxx "v4l-pvrusb2-29xxx-01.fw" |
| static const char *pvr2_fw1_names_29xxx[] = { |
| PVR2_FIRMWARE_29xxx, |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_29xxx = { |
| .description = "WinTV PVR USB2 Model 29xxx", |
| .shortname = "29xxx", |
| .client_table.lst = pvr2_cli_29xxx, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_29xxx), |
| .fx2_firmware.lst = pvr2_fw1_names_29xxx, |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_29xxx), |
| .flag_has_hauppauge_rom = !0, |
| .flag_has_analogtuner = !0, |
| .flag_has_fmradio = !0, |
| .flag_has_composite = !0, |
| .flag_has_svideo = !0, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, |
| .ir_scheme = PVR2_IR_SCHEME_29XXX, |
| }; |
| |
| |
| |
| /*------------------------------------------------------------------------*/ |
| /* Hauppauge PVR-USB2 Model 24xxx */ |
| |
| static const struct pvr2_device_client_desc pvr2_cli_24xxx[] = { |
| { .module_id = PVR2_CLIENT_ID_CX25840 }, |
| { .module_id = PVR2_CLIENT_ID_TUNER }, |
| { .module_id = PVR2_CLIENT_ID_WM8775 }, |
| { .module_id = PVR2_CLIENT_ID_DEMOD }, |
| }; |
| |
| #define PVR2_FIRMWARE_24xxx "v4l-pvrusb2-24xxx-01.fw" |
| static const char *pvr2_fw1_names_24xxx[] = { |
| PVR2_FIRMWARE_24xxx, |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_24xxx = { |
| .description = "WinTV PVR USB2 Model 24xxx", |
| .shortname = "24xxx", |
| .client_table.lst = pvr2_cli_24xxx, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_24xxx), |
| .fx2_firmware.lst = pvr2_fw1_names_24xxx, |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_24xxx), |
| .flag_has_cx25840 = !0, |
| .flag_has_wm8775 = !0, |
| .flag_has_hauppauge_rom = !0, |
| .flag_has_analogtuner = !0, |
| .flag_has_fmradio = !0, |
| .flag_has_composite = !0, |
| .flag_has_svideo = !0, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, |
| .ir_scheme = PVR2_IR_SCHEME_24XXX, |
| }; |
| |
| |
| |
| /*------------------------------------------------------------------------*/ |
| /* GOTVIEW USB2.0 DVD2 */ |
| |
| static const struct pvr2_device_client_desc pvr2_cli_gotview_2[] = { |
| { .module_id = PVR2_CLIENT_ID_CX25840 }, |
| { .module_id = PVR2_CLIENT_ID_TUNER }, |
| { .module_id = PVR2_CLIENT_ID_DEMOD }, |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_gotview_2 = { |
| .description = "Gotview USB 2.0 DVD 2", |
| .shortname = "gv2", |
| .client_table.lst = pvr2_cli_gotview_2, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2), |
| .flag_has_cx25840 = !0, |
| .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, |
| .flag_has_analogtuner = !0, |
| .flag_has_fmradio = !0, |
| .flag_has_composite = !0, |
| .flag_has_svideo = !0, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, |
| }; |
| |
| |
| |
| /*------------------------------------------------------------------------*/ |
| /* GOTVIEW USB2.0 DVD Deluxe */ |
| |
| /* (same module list as gotview_2) */ |
| |
| static const struct pvr2_device_desc pvr2_device_gotview_2d = { |
| .description = "Gotview USB 2.0 DVD Deluxe", |
| .shortname = "gv2d", |
| .client_table.lst = pvr2_cli_gotview_2, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_gotview_2), |
| .flag_has_cx25840 = !0, |
| .default_tuner_type = TUNER_PHILIPS_FM1216ME_MK3, |
| .flag_has_analogtuner = !0, |
| .flag_has_composite = !0, |
| .flag_has_svideo = !0, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_GOTVIEW, |
| }; |
| |
| |
| |
| /*------------------------------------------------------------------------*/ |
| /* Terratec Grabster AV400 */ |
| |
| static const struct pvr2_device_client_desc pvr2_cli_av400[] = { |
| { .module_id = PVR2_CLIENT_ID_CX25840 }, |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_av400 = { |
| .description = "Terratec Grabster AV400", |
| .shortname = "av400", |
| .flag_is_experimental = 1, |
| .client_table.lst = pvr2_cli_av400, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_av400), |
| .flag_has_cx25840 = !0, |
| .flag_has_analogtuner = 0, |
| .flag_has_composite = !0, |
| .flag_has_svideo = !0, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_AV400, |
| }; |
| |
| |
| |
| /*------------------------------------------------------------------------*/ |
| /* OnAir Creator */ |
| |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| static struct lgdt330x_config pvr2_lgdt3303_config = { |
| .demod_chip = LGDT3303, |
| .clock_polarity_flip = 1, |
| }; |
| |
| static int pvr2_lgdt3303_attach(struct pvr2_dvb_adapter *adap) |
| { |
| adap->fe[0] = dvb_attach(lgdt330x_attach, &pvr2_lgdt3303_config, |
| 0x0e, |
| &adap->channel.hdw->i2c_adap); |
| if (adap->fe[0]) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int pvr2_lgh06xf_attach(struct pvr2_dvb_adapter *adap) |
| { |
| dvb_attach(simple_tuner_attach, adap->fe[0], |
| &adap->channel.hdw->i2c_adap, 0x61, |
| TUNER_LG_TDVS_H06XF); |
| |
| return 0; |
| } |
| |
| static const struct pvr2_dvb_props pvr2_onair_creator_fe_props = { |
| .frontend_attach = pvr2_lgdt3303_attach, |
| .tuner_attach = pvr2_lgh06xf_attach, |
| }; |
| #endif |
| |
| static const struct pvr2_device_client_desc pvr2_cli_onair_creator[] = { |
| { .module_id = PVR2_CLIENT_ID_SAA7115 }, |
| { .module_id = PVR2_CLIENT_ID_CS53L32A }, |
| { .module_id = PVR2_CLIENT_ID_TUNER }, |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_onair_creator = { |
| .description = "OnAir Creator Hybrid USB tuner", |
| .shortname = "oac", |
| .client_table.lst = pvr2_cli_onair_creator, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_creator), |
| .default_tuner_type = TUNER_LG_TDVS_H06XF, |
| .flag_has_analogtuner = !0, |
| .flag_has_composite = !0, |
| .flag_has_svideo = !0, |
| .flag_digital_requires_cx23416 = !0, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR, |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, |
| .default_std_mask = V4L2_STD_NTSC_M, |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| .dvb_props = &pvr2_onair_creator_fe_props, |
| #endif |
| }; |
| |
| |
| |
| /*------------------------------------------------------------------------*/ |
| /* OnAir USB 2.0 */ |
| |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| static struct lgdt330x_config pvr2_lgdt3302_config = { |
| .demod_chip = LGDT3302, |
| }; |
| |
| static int pvr2_lgdt3302_attach(struct pvr2_dvb_adapter *adap) |
| { |
| adap->fe[0] = dvb_attach(lgdt330x_attach, &pvr2_lgdt3302_config, |
| 0x0e, |
| &adap->channel.hdw->i2c_adap); |
| if (adap->fe[0]) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int pvr2_fcv1236d_attach(struct pvr2_dvb_adapter *adap) |
| { |
| dvb_attach(simple_tuner_attach, adap->fe[0], |
| &adap->channel.hdw->i2c_adap, 0x61, |
| TUNER_PHILIPS_FCV1236D); |
| |
| return 0; |
| } |
| |
| static const struct pvr2_dvb_props pvr2_onair_usb2_fe_props = { |
| .frontend_attach = pvr2_lgdt3302_attach, |
| .tuner_attach = pvr2_fcv1236d_attach, |
| }; |
| #endif |
| |
| static const struct pvr2_device_client_desc pvr2_cli_onair_usb2[] = { |
| { .module_id = PVR2_CLIENT_ID_SAA7115 }, |
| { .module_id = PVR2_CLIENT_ID_CS53L32A }, |
| { .module_id = PVR2_CLIENT_ID_TUNER }, |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_onair_usb2 = { |
| .description = "OnAir USB2 Hybrid USB tuner", |
| .shortname = "oa2", |
| .client_table.lst = pvr2_cli_onair_usb2, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_onair_usb2), |
| .default_tuner_type = TUNER_PHILIPS_FCV1236D, |
| .flag_has_analogtuner = !0, |
| .flag_has_composite = !0, |
| .flag_has_svideo = !0, |
| .flag_digital_requires_cx23416 = !0, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_ONAIR, |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_ONAIR, |
| .default_std_mask = V4L2_STD_NTSC_M, |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| .dvb_props = &pvr2_onair_usb2_fe_props, |
| #endif |
| }; |
| |
| |
| |
| /*------------------------------------------------------------------------*/ |
| /* Hauppauge PVR-USB2 Model 73xxx */ |
| |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| static struct tda10048_config hauppauge_tda10048_config = { |
| .demod_address = 0x10 >> 1, |
| .output_mode = TDA10048_PARALLEL_OUTPUT, |
| .fwbulkwritelen = TDA10048_BULKWRITE_50, |
| .inversion = TDA10048_INVERSION_ON, |
| .dtv6_if_freq_khz = TDA10048_IF_3300, |
| .dtv7_if_freq_khz = TDA10048_IF_3800, |
| .dtv8_if_freq_khz = TDA10048_IF_4300, |
| .clk_freq_khz = TDA10048_CLK_16000, |
| .disable_gate_access = 1, |
| }; |
| |
| static struct tda829x_config tda829x_no_probe = { |
| .probe_tuner = TDA829X_DONT_PROBE, |
| }; |
| |
| static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = { |
| .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| }; |
| |
| static struct tda18271_config hauppauge_tda18271_dvb_config = { |
| .std_map = &hauppauge_tda18271_dvbt_std_map, |
| .gate = TDA18271_GATE_ANALOG, |
| .output_opt = TDA18271_OUTPUT_LT_OFF, |
| }; |
| |
| static int pvr2_tda10048_attach(struct pvr2_dvb_adapter *adap) |
| { |
| adap->fe[0] = dvb_attach(tda10048_attach, &hauppauge_tda10048_config, |
| &adap->channel.hdw->i2c_adap); |
| if (adap->fe[0]) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int pvr2_73xxx_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) |
| { |
| dvb_attach(tda829x_attach, adap->fe[0], |
| &adap->channel.hdw->i2c_adap, 0x42, |
| &tda829x_no_probe); |
| dvb_attach(tda18271_attach, adap->fe[0], 0x60, |
| &adap->channel.hdw->i2c_adap, |
| &hauppauge_tda18271_dvb_config); |
| |
| return 0; |
| } |
| |
| static const struct pvr2_dvb_props pvr2_73xxx_dvb_props = { |
| .frontend_attach = pvr2_tda10048_attach, |
| .tuner_attach = pvr2_73xxx_tda18271_8295_attach, |
| }; |
| #endif |
| |
| static const struct pvr2_device_client_desc pvr2_cli_73xxx[] = { |
| { .module_id = PVR2_CLIENT_ID_CX25840 }, |
| { .module_id = PVR2_CLIENT_ID_TUNER, |
| .i2c_address_list = "\x42"}, |
| }; |
| |
| #define PVR2_FIRMWARE_73xxx "v4l-pvrusb2-73xxx-01.fw" |
| static const char *pvr2_fw1_names_73xxx[] = { |
| PVR2_FIRMWARE_73xxx, |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_73xxx = { |
| .description = "WinTV HVR-1900 Model 73xxx", |
| .shortname = "73xxx", |
| .client_table.lst = pvr2_cli_73xxx, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), |
| .fx2_firmware.lst = pvr2_fw1_names_73xxx, |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_73xxx), |
| .flag_has_cx25840 = !0, |
| .flag_has_hauppauge_rom = !0, |
| .flag_has_analogtuner = !0, |
| .flag_has_composite = !0, |
| .flag_has_svideo = !0, |
| .flag_fx2_16kb = !0, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, |
| .ir_scheme = PVR2_IR_SCHEME_ZILOG, |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| .dvb_props = &pvr2_73xxx_dvb_props, |
| #endif |
| }; |
| |
| |
| |
| /*------------------------------------------------------------------------*/ |
| /* Hauppauge PVR-USB2 Model 75xxx */ |
| |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| static struct s5h1409_config pvr2_s5h1409_config = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_PARALLEL_OUTPUT, |
| .gpio = S5H1409_GPIO_OFF, |
| .qam_if = 4000, |
| .inversion = S5H1409_INVERSION_ON, |
| .status_mode = S5H1409_DEMODLOCKING, |
| }; |
| |
| static struct s5h1411_config pvr2_s5h1411_config = { |
| .output_mode = S5H1411_PARALLEL_OUTPUT, |
| .gpio = S5H1411_GPIO_OFF, |
| .vsb_if = S5H1411_IF_44000, |
| .qam_if = S5H1411_IF_4000, |
| .inversion = S5H1411_INVERSION_ON, |
| .status_mode = S5H1411_DEMODLOCKING, |
| }; |
| |
| static struct tda18271_std_map hauppauge_tda18271_std_map = { |
| .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, |
| .if_lvl = 6, .rfagc_top = 0x37, }, |
| .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, |
| .if_lvl = 6, .rfagc_top = 0x37, }, |
| }; |
| |
| static struct tda18271_config hauppauge_tda18271_config = { |
| .std_map = &hauppauge_tda18271_std_map, |
| .gate = TDA18271_GATE_ANALOG, |
| .output_opt = TDA18271_OUTPUT_LT_OFF, |
| }; |
| |
| static int pvr2_s5h1409_attach(struct pvr2_dvb_adapter *adap) |
| { |
| adap->fe[0] = dvb_attach(s5h1409_attach, &pvr2_s5h1409_config, |
| &adap->channel.hdw->i2c_adap); |
| if (adap->fe[0]) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int pvr2_s5h1411_attach(struct pvr2_dvb_adapter *adap) |
| { |
| adap->fe[0] = dvb_attach(s5h1411_attach, &pvr2_s5h1411_config, |
| &adap->channel.hdw->i2c_adap); |
| if (adap->fe[0]) |
| return 0; |
| |
| return -EIO; |
| } |
| |
| static int pvr2_tda18271_8295_attach(struct pvr2_dvb_adapter *adap) |
| { |
| dvb_attach(tda829x_attach, adap->fe[0], |
| &adap->channel.hdw->i2c_adap, 0x42, |
| &tda829x_no_probe); |
| dvb_attach(tda18271_attach, adap->fe[0], 0x60, |
| &adap->channel.hdw->i2c_adap, |
| &hauppauge_tda18271_config); |
| |
| return 0; |
| } |
| |
| static const struct pvr2_dvb_props pvr2_750xx_dvb_props = { |
| .frontend_attach = pvr2_s5h1409_attach, |
| .tuner_attach = pvr2_tda18271_8295_attach, |
| }; |
| |
| static const struct pvr2_dvb_props pvr2_751xx_dvb_props = { |
| .frontend_attach = pvr2_s5h1411_attach, |
| .tuner_attach = pvr2_tda18271_8295_attach, |
| }; |
| #endif |
| |
| #define PVR2_FIRMWARE_75xxx "v4l-pvrusb2-73xxx-01.fw" |
| static const char *pvr2_fw1_names_75xxx[] = { |
| PVR2_FIRMWARE_75xxx, |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_750xx = { |
| .description = "WinTV HVR-1950 Model 750xx", |
| .shortname = "750xx", |
| .client_table.lst = pvr2_cli_73xxx, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), |
| .fx2_firmware.lst = pvr2_fw1_names_75xxx, |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), |
| .flag_has_cx25840 = !0, |
| .flag_has_hauppauge_rom = !0, |
| .flag_has_analogtuner = !0, |
| .flag_has_composite = !0, |
| .flag_has_svideo = !0, |
| .flag_fx2_16kb = !0, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, |
| .default_std_mask = V4L2_STD_NTSC_M, |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, |
| .ir_scheme = PVR2_IR_SCHEME_ZILOG, |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| .dvb_props = &pvr2_750xx_dvb_props, |
| #endif |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_751xx = { |
| .description = "WinTV HVR-1950 Model 751xx", |
| .shortname = "751xx", |
| .client_table.lst = pvr2_cli_73xxx, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_73xxx), |
| .fx2_firmware.lst = pvr2_fw1_names_75xxx, |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_75xxx), |
| .flag_has_cx25840 = !0, |
| .flag_has_hauppauge_rom = !0, |
| .flag_has_analogtuner = !0, |
| .flag_has_composite = !0, |
| .flag_has_svideo = !0, |
| .flag_fx2_16kb = !0, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, |
| .default_std_mask = V4L2_STD_NTSC_M, |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, |
| .ir_scheme = PVR2_IR_SCHEME_ZILOG, |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| .dvb_props = &pvr2_751xx_dvb_props, |
| #endif |
| }; |
| |
| /*------------------------------------------------------------------------*/ |
| /* Hauppauge PVR-USB2 Model 160000 / 160111 -- HVR-1955 / HVR-1975 */ |
| |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap); |
| static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap); |
| static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap); |
| static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap); |
| |
| static const struct pvr2_dvb_props pvr2_160000_dvb_props = { |
| .frontend_attach = pvr2_dual_fe_attach, |
| .tuner_attach = pvr2_si2157_attach, |
| }; |
| |
| static const struct pvr2_dvb_props pvr2_160111_dvb_props = { |
| .frontend_attach = pvr2_lgdt3306a_attach, |
| .tuner_attach = pvr2_si2157_attach, |
| }; |
| |
| static int pvr2_si2157_attach(struct pvr2_dvb_adapter *adap) |
| { |
| struct si2157_config si2157_config = {}; |
| |
| si2157_config.inversion = 1; |
| si2157_config.fe = adap->fe[0]; |
| |
| adap->i2c_client_tuner = dvb_module_probe("si2157", "si2177", |
| &adap->channel.hdw->i2c_adap, |
| 0x60, &si2157_config); |
| |
| if (!adap->i2c_client_tuner) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int pvr2_si2168_attach(struct pvr2_dvb_adapter *adap) |
| { |
| struct si2168_config si2168_config = {}; |
| struct i2c_adapter *adapter; |
| |
| pr_debug("%s()\n", __func__); |
| |
| si2168_config.fe = &adap->fe[1]; |
| si2168_config.i2c_adapter = &adapter; |
| si2168_config.ts_mode = SI2168_TS_PARALLEL; /*2, 1-serial, 2-parallel.*/ |
| si2168_config.ts_clock_gapped = 1; /*0-disabled, 1-enabled.*/ |
| si2168_config.ts_clock_inv = 0; /*0-not-invert, 1-invert*/ |
| si2168_config.spectral_inversion = 1; /*0-not-invert, 1-invert*/ |
| |
| adap->i2c_client_demod[1] = dvb_module_probe("si2168", NULL, |
| &adap->channel.hdw->i2c_adap, |
| 0x64, &si2168_config); |
| |
| if (!adap->i2c_client_demod[1]) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int pvr2_lgdt3306a_attach(struct pvr2_dvb_adapter *adap) |
| { |
| struct lgdt3306a_config lgdt3306a_config; |
| struct i2c_adapter *adapter; |
| |
| pr_debug("%s()\n", __func__); |
| |
| lgdt3306a_config.fe = &adap->fe[0]; |
| lgdt3306a_config.i2c_adapter = &adapter; |
| lgdt3306a_config.deny_i2c_rptr = 1; |
| lgdt3306a_config.spectral_inversion = 1; |
| lgdt3306a_config.qam_if_khz = 4000; |
| lgdt3306a_config.vsb_if_khz = 3250; |
| lgdt3306a_config.mpeg_mode = LGDT3306A_MPEG_PARALLEL; |
| lgdt3306a_config.tpclk_edge = LGDT3306A_TPCLK_FALLING_EDGE; |
| lgdt3306a_config.tpvalid_polarity = LGDT3306A_TP_VALID_LOW; |
| lgdt3306a_config.xtalMHz = 25; /* demod clock MHz; 24/25 supported */ |
| |
| adap->i2c_client_demod[0] = dvb_module_probe("lgdt3306a", NULL, |
| &adap->channel.hdw->i2c_adap, |
| 0x59, &lgdt3306a_config); |
| |
| if (!adap->i2c_client_demod[0]) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int pvr2_dual_fe_attach(struct pvr2_dvb_adapter *adap) |
| { |
| pr_debug("%s()\n", __func__); |
| |
| if (pvr2_lgdt3306a_attach(adap) != 0) |
| return -ENODEV; |
| |
| if (pvr2_si2168_attach(adap) != 0) { |
| dvb_module_release(adap->i2c_client_demod[0]); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #define PVR2_FIRMWARE_160xxx "v4l-pvrusb2-160xxx-01.fw" |
| static const char *pvr2_fw1_names_160xxx[] = { |
| PVR2_FIRMWARE_160xxx, |
| }; |
| |
| static const struct pvr2_device_client_desc pvr2_cli_160xxx[] = { |
| { .module_id = PVR2_CLIENT_ID_CX25840 }, |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_160000 = { |
| .description = "WinTV HVR-1975 Model 160000", |
| .shortname = "160000", |
| .client_table.lst = pvr2_cli_160xxx, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx), |
| .fx2_firmware.lst = pvr2_fw1_names_160xxx, |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx), |
| .default_tuner_type = TUNER_ABSENT, |
| .flag_has_cx25840 = 1, |
| .flag_has_hauppauge_rom = 1, |
| .flag_has_analogtuner = 1, |
| .flag_has_composite = 1, |
| .flag_has_svideo = 1, |
| .flag_fx2_16kb = 1, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, |
| .default_std_mask = V4L2_STD_NTSC_M, |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, |
| .ir_scheme = PVR2_IR_SCHEME_ZILOG, |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| .dvb_props = &pvr2_160000_dvb_props, |
| #endif |
| }; |
| |
| static const struct pvr2_device_desc pvr2_device_160111 = { |
| .description = "WinTV HVR-1955 Model 160111", |
| .shortname = "160111", |
| .client_table.lst = pvr2_cli_160xxx, |
| .client_table.cnt = ARRAY_SIZE(pvr2_cli_160xxx), |
| .fx2_firmware.lst = pvr2_fw1_names_160xxx, |
| .fx2_firmware.cnt = ARRAY_SIZE(pvr2_fw1_names_160xxx), |
| .default_tuner_type = TUNER_ABSENT, |
| .flag_has_cx25840 = 1, |
| .flag_has_hauppauge_rom = 1, |
| .flag_has_analogtuner = 1, |
| .flag_has_composite = 1, |
| .flag_has_svideo = 1, |
| .flag_fx2_16kb = 1, |
| .signal_routing_scheme = PVR2_ROUTING_SCHEME_HAUPPAUGE, |
| .digital_control_scheme = PVR2_DIGITAL_SCHEME_HAUPPAUGE, |
| .default_std_mask = V4L2_STD_NTSC_M, |
| .led_scheme = PVR2_LED_SCHEME_HAUPPAUGE, |
| .ir_scheme = PVR2_IR_SCHEME_ZILOG, |
| #ifdef CONFIG_VIDEO_PVRUSB2_DVB |
| .dvb_props = &pvr2_160111_dvb_props, |
| #endif |
| }; |
| |
| /*------------------------------------------------------------------------*/ |
| |
| struct usb_device_id pvr2_device_table[] = { |
| { USB_DEVICE(0x2040, 0x2900), |
| .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, |
| { USB_DEVICE(0x2040, 0x2950), /* Logically identical to 2900 */ |
| .driver_info = (kernel_ulong_t)&pvr2_device_29xxx}, |
| { USB_DEVICE(0x2040, 0x2400), |
| .driver_info = (kernel_ulong_t)&pvr2_device_24xxx}, |
| { USB_DEVICE(0x1164, 0x0622), |
| .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2}, |
| { USB_DEVICE(0x1164, 0x0602), |
| .driver_info = (kernel_ulong_t)&pvr2_device_gotview_2d}, |
| { USB_DEVICE(0x11ba, 0x1003), |
| .driver_info = (kernel_ulong_t)&pvr2_device_onair_creator}, |
| { USB_DEVICE(0x11ba, 0x1001), |
| .driver_info = (kernel_ulong_t)&pvr2_device_onair_usb2}, |
| { USB_DEVICE(0x2040, 0x7300), |
| .driver_info = (kernel_ulong_t)&pvr2_device_73xxx}, |
| { USB_DEVICE(0x2040, 0x7500), |
| .driver_info = (kernel_ulong_t)&pvr2_device_750xx}, |
| { USB_DEVICE(0x2040, 0x7501), |
| .driver_info = (kernel_ulong_t)&pvr2_device_751xx}, |
| { USB_DEVICE(0x0ccd, 0x0039), |
| .driver_info = (kernel_ulong_t)&pvr2_device_av400}, |
| { USB_DEVICE(0x2040, 0x7502), |
| .driver_info = (kernel_ulong_t)&pvr2_device_160111}, |
| { USB_DEVICE(0x2040, 0x7510), |
| .driver_info = (kernel_ulong_t)&pvr2_device_160000}, |
| { } |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, pvr2_device_table); |
| MODULE_FIRMWARE(PVR2_FIRMWARE_29xxx); |
| MODULE_FIRMWARE(PVR2_FIRMWARE_24xxx); |
| MODULE_FIRMWARE(PVR2_FIRMWARE_73xxx); |
| MODULE_FIRMWARE(PVR2_FIRMWARE_75xxx); |
