| // SPDX-License-Identifier: GPL-2.0-or-later |
| /**************************************************************** |
| |
| Siano Mobile Silicon, Inc. |
| MDTV receiver kernel modules. |
| Copyright (C) 2005-2009, Uri Shkolnik, Anatoly Greenblat |
| |
| |
| ****************************************************************/ |
| |
| #include "smscoreapi.h" |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/usb.h> |
| #include <linux/firmware.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <media/media-device.h> |
| |
| #include "sms-cards.h" |
| #include "smsendian.h" |
| |
| #define USB1_BUFFER_SIZE 0x1000 |
| #define USB2_BUFFER_SIZE 0x2000 |
| |
| #define MAX_BUFFERS 50 |
| #define MAX_URBS 10 |
| |
| struct smsusb_device_t; |
| |
| enum smsusb_state { |
| SMSUSB_DISCONNECTED, |
| SMSUSB_SUSPENDED, |
| SMSUSB_ACTIVE |
| }; |
| |
| struct smsusb_urb_t { |
| struct list_head entry; |
| struct smscore_buffer_t *cb; |
| struct smsusb_device_t *dev; |
| |
| struct urb urb; |
| |
| /* For the bottom half */ |
| struct work_struct wq; |
| }; |
| |
| struct smsusb_device_t { |
| struct usb_device *udev; |
| struct smscore_device_t *coredev; |
| |
| struct smsusb_urb_t surbs[MAX_URBS]; |
| |
| int response_alignment; |
| int buffer_size; |
| |
| unsigned char in_ep; |
| unsigned char out_ep; |
| enum smsusb_state state; |
| }; |
| |
| static int smsusb_submit_urb(struct smsusb_device_t *dev, |
| struct smsusb_urb_t *surb); |
| |
| /* |
| * Completing URB's callback handler - bottom half (process context) |
| * submits the URB prepared on smsusb_onresponse() |
| */ |
| static void do_submit_urb(struct work_struct *work) |
| { |
| struct smsusb_urb_t *surb = container_of(work, struct smsusb_urb_t, wq); |
| struct smsusb_device_t *dev = surb->dev; |
| |
| smsusb_submit_urb(dev, surb); |
| } |
| |
| /* |
| * Completing URB's callback handler - top half (interrupt context) |
| * adds completing sms urb to the global surbs list and activtes the worker |
| * thread the surb |
| * IMPORTANT - blocking functions must not be called from here !!! |
| |
| * @param urb pointer to a completing urb object |
| */ |
| static void smsusb_onresponse(struct urb *urb) |
| { |
| struct smsusb_urb_t *surb = (struct smsusb_urb_t *) urb->context; |
| struct smsusb_device_t *dev = surb->dev; |
| |
| if (urb->status == -ESHUTDOWN) { |
| pr_err("error, urb status %d (-ESHUTDOWN), %d bytes\n", |
| urb->status, urb->actual_length); |
| return; |
| } |
| |
| if ((urb->actual_length > 0) && (urb->status == 0)) { |
| struct sms_msg_hdr *phdr = (struct sms_msg_hdr *)surb->cb->p; |
| |
| smsendian_handle_message_header(phdr); |
| if (urb->actual_length >= phdr->msg_length) { |
| surb->cb->size = phdr->msg_length; |
| |
| if (dev->response_alignment && |
| (phdr->msg_flags & MSG_HDR_FLAG_SPLIT_MSG)) { |
| |
| surb->cb->offset = |
| dev->response_alignment + |
| ((phdr->msg_flags >> 8) & 3); |
| |
| /* sanity check */ |
| if (((int) phdr->msg_length + |
| surb->cb->offset) > urb->actual_length) { |
| pr_err("invalid response msglen %d offset %d size %d\n", |
| phdr->msg_length, |
| surb->cb->offset, |
| urb->actual_length); |
| goto exit_and_resubmit; |
| } |
| |
| /* move buffer pointer and |
| * copy header to its new location */ |
| memcpy((char *) phdr + surb->cb->offset, |
| phdr, sizeof(struct sms_msg_hdr)); |
| } else |
| surb->cb->offset = 0; |
| |
| pr_debug("received %s(%d) size: %d\n", |
| smscore_translate_msg(phdr->msg_type), |
| phdr->msg_type, phdr->msg_length); |
| |
| smsendian_handle_rx_message((struct sms_msg_data *) phdr); |
| |
| smscore_onresponse(dev->coredev, surb->cb); |
| surb->cb = NULL; |
| } else { |
| pr_err("invalid response msglen %d actual %d\n", |
| phdr->msg_length, urb->actual_length); |
| } |
| } else |
| pr_err("error, urb status %d, %d bytes\n", |
| urb->status, urb->actual_length); |
| |
| |
| exit_and_resubmit: |
| INIT_WORK(&surb->wq, do_submit_urb); |
| schedule_work(&surb->wq); |
| } |
| |
| static int smsusb_submit_urb(struct smsusb_device_t *dev, |
| struct smsusb_urb_t *surb) |
| { |
| if (!surb->cb) { |
| /* This function can sleep */ |
| surb->cb = smscore_getbuffer(dev->coredev); |
| if (!surb->cb) { |
| pr_err("smscore_getbuffer(...) returned NULL\n"); |
| return -ENOMEM; |
| } |
| } |
| |
| usb_fill_bulk_urb( |
| &surb->urb, |
| dev->udev, |
| usb_rcvbulkpipe(dev->udev, dev->in_ep), |
| surb->cb->p, |
| dev->buffer_size, |
| smsusb_onresponse, |
| surb |
| ); |
| surb->urb.transfer_flags |= URB_FREE_BUFFER; |
| |
| return usb_submit_urb(&surb->urb, GFP_ATOMIC); |
| } |
| |
| static void smsusb_stop_streaming(struct smsusb_device_t *dev) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_URBS; i++) { |
| usb_kill_urb(&dev->surbs[i].urb); |
| |
| if (dev->surbs[i].cb) { |
| smscore_putbuffer(dev->coredev, dev->surbs[i].cb); |
| dev->surbs[i].cb = NULL; |
| } |
| } |
| } |
| |
| static int smsusb_start_streaming(struct smsusb_device_t *dev) |
| { |
| int i, rc; |
| |
| for (i = 0; i < MAX_URBS; i++) { |
| rc = smsusb_submit_urb(dev, &dev->surbs[i]); |
| if (rc < 0) { |
| pr_err("smsusb_submit_urb(...) failed\n"); |
| smsusb_stop_streaming(dev); |
| break; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static int smsusb_sendrequest(void *context, void *buffer, size_t size) |
| { |
| struct smsusb_device_t *dev = (struct smsusb_device_t *) context; |
| struct sms_msg_hdr *phdr; |
| int dummy, ret; |
| |
| if (dev->state != SMSUSB_ACTIVE) { |
| pr_debug("Device not active yet\n"); |
| return -ENOENT; |
| } |
| |
| phdr = kmemdup(buffer, size, GFP_KERNEL); |
| if (!phdr) |
| return -ENOMEM; |
| |
| pr_debug("sending %s(%d) size: %d\n", |
| smscore_translate_msg(phdr->msg_type), phdr->msg_type, |
| phdr->msg_length); |
| |
| smsendian_handle_tx_message((struct sms_msg_data *) phdr); |
| smsendian_handle_message_header((struct sms_msg_hdr *)phdr); |
| ret = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 2), |
| phdr, size, &dummy, 1000); |
| |
| kfree(phdr); |
| return ret; |
| } |
| |
| static char *smsusb1_fw_lkup[] = { |
| "dvbt_stellar_usb.inp", |
| "dvbh_stellar_usb.inp", |
| "tdmb_stellar_usb.inp", |
| "none", |
| "dvbt_bda_stellar_usb.inp", |
| }; |
| |
| static inline char *sms_get_fw_name(int mode, int board_id) |
| { |
| char **fw = sms_get_board(board_id)->fw; |
| return (fw && fw[mode]) ? fw[mode] : smsusb1_fw_lkup[mode]; |
| } |
| |
| static int smsusb1_load_firmware(struct usb_device *udev, int id, int board_id) |
| { |
| const struct firmware *fw; |
| u8 *fw_buffer; |
| int rc, dummy; |
| char *fw_filename; |
| |
| if (id < 0) |
| id = sms_get_board(board_id)->default_mode; |
| |
| if (id < DEVICE_MODE_DVBT || id > DEVICE_MODE_DVBT_BDA) { |
| pr_err("invalid firmware id specified %d\n", id); |
| return -EINVAL; |
| } |
| |
| fw_filename = sms_get_fw_name(id, board_id); |
| |
| rc = request_firmware(&fw, fw_filename, &udev->dev); |
| if (rc < 0) { |
| pr_warn("failed to open '%s' mode %d, trying again with default firmware\n", |
| fw_filename, id); |
| |
| fw_filename = smsusb1_fw_lkup[id]; |
| rc = request_firmware(&fw, fw_filename, &udev->dev); |
| if (rc < 0) { |
| pr_warn("failed to open '%s' mode %d\n", |
| fw_filename, id); |
| |
| return rc; |
| } |
| } |
| |
| fw_buffer = kmalloc(fw->size, GFP_KERNEL); |
| if (fw_buffer) { |
| memcpy(fw_buffer, fw->data, fw->size); |
| |
| rc = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 2), |
| fw_buffer, fw->size, &dummy, 1000); |
| |
| pr_debug("sent %zu(%d) bytes, rc %d\n", fw->size, dummy, rc); |
| |
| kfree(fw_buffer); |
| } else { |
| pr_err("failed to allocate firmware buffer\n"); |
| rc = -ENOMEM; |
| } |
| pr_debug("read FW %s, size=%zu\n", fw_filename, fw->size); |
| |
| release_firmware(fw); |
| |
| return rc; |
| } |
| |
| static void smsusb1_detectmode(void *context, int *mode) |
| { |
| char *product_string = |
| ((struct smsusb_device_t *) context)->udev->product; |
| |
| *mode = DEVICE_MODE_NONE; |
| |
| if (!product_string) { |
| product_string = "none"; |
| pr_err("product string not found\n"); |
| } else if (strstr(product_string, "DVBH")) |
| *mode = 1; |
| else if (strstr(product_string, "BDA")) |
| *mode = 4; |
| else if (strstr(product_string, "DVBT")) |
| *mode = 0; |
| else if (strstr(product_string, "TDMB")) |
| *mode = 2; |
| |
| pr_debug("%d \"%s\"\n", *mode, product_string); |
| } |
| |
| static int smsusb1_setmode(void *context, int mode) |
| { |
| struct sms_msg_hdr msg = { MSG_SW_RELOAD_REQ, 0, HIF_TASK, |
| sizeof(struct sms_msg_hdr), 0 }; |
| |
| if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_DVBT_BDA) { |
| pr_err("invalid firmware id specified %d\n", mode); |
| return -EINVAL; |
| } |
| |
| return smsusb_sendrequest(context, &msg, sizeof(msg)); |
| } |
| |
| static void smsusb_term_device(struct usb_interface *intf) |
| { |
| struct smsusb_device_t *dev = usb_get_intfdata(intf); |
| |
| if (dev) { |
| dev->state = SMSUSB_DISCONNECTED; |
| |
| smsusb_stop_streaming(dev); |
| |
| /* unregister from smscore */ |
| if (dev->coredev) |
| smscore_unregister_device(dev->coredev); |
| |
| pr_debug("device 0x%p destroyed\n", dev); |
| kfree(dev); |
| } |
| |
| usb_set_intfdata(intf, NULL); |
| } |
| |
| static void *siano_media_device_register(struct smsusb_device_t *dev, |
| int board_id) |
| { |
| #ifdef CONFIG_MEDIA_CONTROLLER_DVB |
| struct media_device *mdev; |
| struct usb_device *udev = dev->udev; |
| struct sms_board *board = sms_get_board(board_id); |
| int ret; |
| |
| mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); |
| if (!mdev) |
| return NULL; |
| |
| media_device_usb_init(mdev, udev, board->name); |
| |
| ret = media_device_register(mdev); |
| if (ret) { |
| media_device_cleanup(mdev); |
| kfree(mdev); |
| return NULL; |
| } |
| |
| pr_info("media controller created\n"); |
| |
| return mdev; |
| #else |
| return NULL; |
| #endif |
| } |
| |
| static int smsusb_init_device(struct usb_interface *intf, int board_id) |
| { |
| struct smsdevice_params_t params; |
| struct smsusb_device_t *dev; |
| void *mdev; |
| int i, rc; |
| int align = 0; |
| |
| /* create device object */ |
| dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| |
| memset(¶ms, 0, sizeof(params)); |
| usb_set_intfdata(intf, dev); |
| dev->udev = interface_to_usbdev(intf); |
| dev->state = SMSUSB_DISCONNECTED; |
| |
| for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { |
| struct usb_endpoint_descriptor *desc = |
| &intf->cur_altsetting->endpoint[i].desc; |
| |
| if (desc->bEndpointAddress & USB_DIR_IN) { |
| dev->in_ep = desc->bEndpointAddress; |
| align = usb_endpoint_maxp(desc) - sizeof(struct sms_msg_hdr); |
| } else { |
| dev->out_ep = desc->bEndpointAddress; |
| } |
| } |
| |
| pr_debug("in_ep = %02x, out_ep = %02x\n", dev->in_ep, dev->out_ep); |
| if (!dev->in_ep || !dev->out_ep || align < 0) { /* Missing endpoints? */ |
| smsusb_term_device(intf); |
| return -ENODEV; |
| } |
| |
| params.device_type = sms_get_board(board_id)->type; |
| |
| switch (params.device_type) { |
| case SMS_STELLAR: |
| dev->buffer_size = USB1_BUFFER_SIZE; |
| |
| params.setmode_handler = smsusb1_setmode; |
| params.detectmode_handler = smsusb1_detectmode; |
| break; |
| case SMS_UNKNOWN_TYPE: |
| pr_err("Unspecified sms device type!\n"); |
| fallthrough; |
| default: |
| dev->buffer_size = USB2_BUFFER_SIZE; |
| dev->response_alignment = align; |
| |
| params.flags |= SMS_DEVICE_FAMILY2; |
| break; |
| } |
| |
| params.device = &dev->udev->dev; |
| params.usb_device = dev->udev; |
| params.buffer_size = dev->buffer_size; |
| params.num_buffers = MAX_BUFFERS; |
| params.sendrequest_handler = smsusb_sendrequest; |
| params.context = dev; |
| usb_make_path(dev->udev, params.devpath, sizeof(params.devpath)); |
| |
| mdev = siano_media_device_register(dev, board_id); |
| |
| /* register in smscore */ |
| rc = smscore_register_device(¶ms, &dev->coredev, 0, mdev); |
| if (rc < 0) { |
| pr_err("smscore_register_device(...) failed, rc %d\n", rc); |
| smsusb_term_device(intf); |
| #ifdef CONFIG_MEDIA_CONTROLLER_DVB |
| media_device_unregister(mdev); |
| #endif |
| kfree(mdev); |
| return rc; |
| } |
| |
| smscore_set_board_id(dev->coredev, board_id); |
| |
| dev->coredev->is_usb_device = true; |
| |
| /* initialize urbs */ |
| for (i = 0; i < MAX_URBS; i++) { |
| dev->surbs[i].dev = dev; |
| usb_init_urb(&dev->surbs[i].urb); |
| } |
| |
| pr_debug("smsusb_start_streaming(...).\n"); |
| rc = smsusb_start_streaming(dev); |
| if (rc < 0) { |
| pr_err("smsusb_start_streaming(...) failed\n"); |
| smsusb_term_device(intf); |
| return rc; |
| } |
| |
| dev->state = SMSUSB_ACTIVE; |
| |
| rc = smscore_start_device(dev->coredev); |
| if (rc < 0) { |
| pr_err("smscore_start_device(...) failed\n"); |
| smsusb_term_device(intf); |
| return rc; |
| } |
| |
| pr_debug("device 0x%p created\n", dev); |
| |
| return rc; |
| } |
| |
| static int smsusb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *udev = interface_to_usbdev(intf); |
| char devpath[32]; |
| int i, rc; |
| |
| pr_info("board id=%lu, interface number %d\n", |
| id->driver_info, |
| intf->cur_altsetting->desc.bInterfaceNumber); |
| |
| if (sms_get_board(id->driver_info)->intf_num != |
| intf->cur_altsetting->desc.bInterfaceNumber) { |
| pr_debug("interface %d won't be used. Expecting interface %d to popup\n", |
| intf->cur_altsetting->desc.bInterfaceNumber, |
| sms_get_board(id->driver_info)->intf_num); |
| return -ENODEV; |
| } |
| |
| if (intf->num_altsetting > 1) { |
| rc = usb_set_interface(udev, |
| intf->cur_altsetting->desc.bInterfaceNumber, |
| 0); |
| if (rc < 0) { |
| pr_err("usb_set_interface failed, rc %d\n", rc); |
| return rc; |
| } |
| } |
| |
| pr_debug("smsusb_probe %d\n", |
| intf->cur_altsetting->desc.bInterfaceNumber); |
| for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { |
| pr_debug("endpoint %d %02x %02x %d\n", i, |
| intf->cur_altsetting->endpoint[i].desc.bEndpointAddress, |
| intf->cur_altsetting->endpoint[i].desc.bmAttributes, |
| intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize); |
| if (intf->cur_altsetting->endpoint[i].desc.bEndpointAddress & |
| USB_DIR_IN) |
| rc = usb_clear_halt(udev, usb_rcvbulkpipe(udev, |
| intf->cur_altsetting->endpoint[i].desc.bEndpointAddress)); |
| else |
| rc = usb_clear_halt(udev, usb_sndbulkpipe(udev, |
| intf->cur_altsetting->endpoint[i].desc.bEndpointAddress)); |
| } |
| if ((udev->actconfig->desc.bNumInterfaces == 2) && |
| (intf->cur_altsetting->desc.bInterfaceNumber == 0)) { |
| pr_debug("rom interface 0 is not used\n"); |
| return -ENODEV; |
| } |
| |
| if (id->driver_info == SMS1XXX_BOARD_SIANO_STELLAR_ROM) { |
| /* Detected a Siano Stellar uninitialized */ |
| |
| snprintf(devpath, sizeof(devpath), "usb\\%d-%s", |
| udev->bus->busnum, udev->devpath); |
| pr_info("stellar device in cold state was found at %s.\n", |
| devpath); |
| rc = smsusb1_load_firmware( |
| udev, smscore_registry_getmode(devpath), |
| id->driver_info); |
| |
| /* This device will reset and gain another USB ID */ |
| if (!rc) |
| pr_info("stellar device now in warm state\n"); |
| else |
| pr_err("Failed to put stellar in warm state. Error: %d\n", |
| rc); |
| |
| return rc; |
| } else { |
| rc = smsusb_init_device(intf, id->driver_info); |
| } |
| |
| pr_info("Device initialized with return code %d\n", rc); |
| sms_board_load_modules(id->driver_info); |
| return rc; |
| } |
| |
| static void smsusb_disconnect(struct usb_interface *intf) |
| { |
| smsusb_term_device(intf); |
| } |
| |
| static int smsusb_suspend(struct usb_interface *intf, pm_message_t msg) |
| { |
| struct smsusb_device_t *dev = usb_get_intfdata(intf); |
| printk(KERN_INFO "%s Entering status %d.\n", __func__, msg.event); |
| dev->state = SMSUSB_SUSPENDED; |
| /*smscore_set_power_mode(dev, SMS_POWER_MODE_SUSPENDED);*/ |
| smsusb_stop_streaming(dev); |
| return 0; |
| } |
| |
| static int smsusb_resume(struct usb_interface *intf) |
| { |
| int rc, i; |
| struct smsusb_device_t *dev = usb_get_intfdata(intf); |
| struct usb_device *udev = interface_to_usbdev(intf); |
| |
| printk(KERN_INFO "%s Entering.\n", __func__); |
| usb_clear_halt(udev, usb_rcvbulkpipe(udev, dev->in_ep)); |
| usb_clear_halt(udev, usb_sndbulkpipe(udev, dev->out_ep)); |
| |
| for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) |
| printk(KERN_INFO "endpoint %d %02x %02x %d\n", i, |
| intf->cur_altsetting->endpoint[i].desc.bEndpointAddress, |
| intf->cur_altsetting->endpoint[i].desc.bmAttributes, |
| intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize); |
| |
| if (intf->num_altsetting > 0) { |
| rc = usb_set_interface(udev, |
| intf->cur_altsetting->desc. |
| bInterfaceNumber, 0); |
| if (rc < 0) { |
| printk(KERN_INFO "%s usb_set_interface failed, rc %d\n", |
| __func__, rc); |
| return rc; |
| } |
| } |
| |
| smsusb_start_streaming(dev); |
| return 0; |
| } |
| |
| static const struct usb_device_id smsusb_id_table[] = { |
| /* This device is only present before firmware load */ |
| { USB_DEVICE(0x187f, 0x0010), |
| .driver_info = SMS1XXX_BOARD_SIANO_STELLAR_ROM }, |
| /* This device pops up after firmware load */ |
| { USB_DEVICE(0x187f, 0x0100), |
| .driver_info = SMS1XXX_BOARD_SIANO_STELLAR }, |
| |
| { USB_DEVICE(0x187f, 0x0200), |
| .driver_info = SMS1XXX_BOARD_SIANO_NOVA_A }, |
| { USB_DEVICE(0x187f, 0x0201), |
| .driver_info = SMS1XXX_BOARD_SIANO_NOVA_B }, |
| { USB_DEVICE(0x187f, 0x0300), |
| .driver_info = SMS1XXX_BOARD_SIANO_VEGA }, |
| { USB_DEVICE(0x2040, 0x1700), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT }, |
| { USB_DEVICE(0x2040, 0x1800), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A }, |
| { USB_DEVICE(0x2040, 0x1801), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B }, |
| { USB_DEVICE(0x2040, 0x2000), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, |
| { USB_DEVICE(0x2040, 0x2009), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 }, |
| { USB_DEVICE(0x2040, 0x200a), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, |
| { USB_DEVICE(0x2040, 0x2010), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, |
| { USB_DEVICE(0x2040, 0x2011), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, |
| { USB_DEVICE(0x2040, 0x2019), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD }, |
| { USB_DEVICE(0x2040, 0x5500), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0x5510), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0x5520), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0x5530), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0x5580), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0x5590), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x187f, 0x0202), |
| .driver_info = SMS1XXX_BOARD_SIANO_NICE }, |
| { USB_DEVICE(0x187f, 0x0301), |
| .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, |
| { USB_DEVICE(0x2040, 0xb900), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0xb910), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0xb980), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0xb990), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0xc000), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0xc010), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0xc080), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0xc090), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0xc0a0), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x2040, 0xf5a0), |
| .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, |
| { USB_DEVICE(0x187f, 0x0202), |
| .driver_info = SMS1XXX_BOARD_SIANO_NICE }, |
| { USB_DEVICE(0x187f, 0x0301), |
| .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, |
| { USB_DEVICE(0x187f, 0x0302), |
| .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, |
| { USB_DEVICE(0x187f, 0x0310), |
| .driver_info = SMS1XXX_BOARD_SIANO_MING }, |
| { USB_DEVICE(0x187f, 0x0500), |
| .driver_info = SMS1XXX_BOARD_SIANO_PELE }, |
| { USB_DEVICE(0x187f, 0x0600), |
| .driver_info = SMS1XXX_BOARD_SIANO_RIO }, |
| { USB_DEVICE(0x187f, 0x0700), |
| .driver_info = SMS1XXX_BOARD_SIANO_DENVER_2160 }, |
| { USB_DEVICE(0x187f, 0x0800), |
| .driver_info = SMS1XXX_BOARD_SIANO_DENVER_1530 }, |
| { USB_DEVICE(0x19D2, 0x0086), |
| .driver_info = SMS1XXX_BOARD_ZTE_DVB_DATA_CARD }, |
| { USB_DEVICE(0x19D2, 0x0078), |
| .driver_info = SMS1XXX_BOARD_ONDA_MDTV_DATA_CARD }, |
| { USB_DEVICE(0x3275, 0x0080), |
| .driver_info = SMS1XXX_BOARD_SIANO_RIO }, |
| { USB_DEVICE(0x2013, 0x0257), |
| .driver_info = SMS1XXX_BOARD_PCTV_77E }, |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, smsusb_id_table); |
| |
| static struct usb_driver smsusb_driver = { |
| .name = "smsusb", |
| .probe = smsusb_probe, |
| .disconnect = smsusb_disconnect, |
| .id_table = smsusb_id_table, |
| |
| .suspend = smsusb_suspend, |
| .resume = smsusb_resume, |
| }; |
| |
| module_usb_driver(smsusb_driver); |
| |
| MODULE_DESCRIPTION("Driver for the Siano SMS1xxx USB dongle"); |
| MODULE_AUTHOR("Siano Mobile Silicon, INC. (uris@siano-ms.com)"); |
| MODULE_LICENSE("GPL"); |