| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * X.25 Packet Layer release 002 |
| * |
| * This is ALPHA test software. This code may break your machine, |
| * randomly fail to work with new releases, misbehave and/or generally |
| * screw up. It might even work. |
| * |
| * This code REQUIRES 2.1.15 or higher |
| * |
| * History |
| * X.25 001 Jonathan Naylor Started coding. |
| */ |
| |
| #include <linux/if_arp.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <net/x25.h> |
| |
| LIST_HEAD(x25_route_list); |
| DEFINE_RWLOCK(x25_route_list_lock); |
| |
| /* |
| * Add a new route. |
| */ |
| static int x25_add_route(struct x25_address *address, unsigned int sigdigits, |
| struct net_device *dev) |
| { |
| struct x25_route *rt; |
| struct list_head *entry; |
| int rc = -EINVAL; |
| |
| write_lock_bh(&x25_route_list_lock); |
| |
| list_for_each(entry, &x25_route_list) { |
| rt = list_entry(entry, struct x25_route, node); |
| |
| if (!memcmp(&rt->address, address, sigdigits) && |
| rt->sigdigits == sigdigits) |
| goto out; |
| } |
| |
| rt = kmalloc(sizeof(*rt), GFP_ATOMIC); |
| rc = -ENOMEM; |
| if (!rt) |
| goto out; |
| |
| strcpy(rt->address.x25_addr, "000000000000000"); |
| memcpy(rt->address.x25_addr, address->x25_addr, sigdigits); |
| |
| rt->sigdigits = sigdigits; |
| rt->dev = dev; |
| refcount_set(&rt->refcnt, 1); |
| |
| list_add(&rt->node, &x25_route_list); |
| rc = 0; |
| out: |
| write_unlock_bh(&x25_route_list_lock); |
| return rc; |
| } |
| |
| /** |
| * __x25_remove_route - remove route from x25_route_list |
| * @rt: route to remove |
| * |
| * Remove route from x25_route_list. If it was there. |
| * Caller must hold x25_route_list_lock. |
| */ |
| static void __x25_remove_route(struct x25_route *rt) |
| { |
| if (rt->node.next) { |
| list_del(&rt->node); |
| x25_route_put(rt); |
| } |
| } |
| |
| static int x25_del_route(struct x25_address *address, unsigned int sigdigits, |
| struct net_device *dev) |
| { |
| struct x25_route *rt; |
| struct list_head *entry; |
| int rc = -EINVAL; |
| |
| write_lock_bh(&x25_route_list_lock); |
| |
| list_for_each(entry, &x25_route_list) { |
| rt = list_entry(entry, struct x25_route, node); |
| |
| if (!memcmp(&rt->address, address, sigdigits) && |
| rt->sigdigits == sigdigits && rt->dev == dev) { |
| __x25_remove_route(rt); |
| rc = 0; |
| break; |
| } |
| } |
| |
| write_unlock_bh(&x25_route_list_lock); |
| return rc; |
| } |
| |
| /* |
| * A device has been removed, remove its routes. |
| */ |
| void x25_route_device_down(struct net_device *dev) |
| { |
| struct x25_route *rt; |
| struct list_head *entry, *tmp; |
| |
| write_lock_bh(&x25_route_list_lock); |
| |
| list_for_each_safe(entry, tmp, &x25_route_list) { |
| rt = list_entry(entry, struct x25_route, node); |
| |
| if (rt->dev == dev) |
| __x25_remove_route(rt); |
| } |
| write_unlock_bh(&x25_route_list_lock); |
| } |
| |
| /* |
| * Check that the device given is a valid X.25 interface that is "up". |
| */ |
| struct net_device *x25_dev_get(char *devname) |
| { |
| struct net_device *dev = dev_get_by_name(&init_net, devname); |
| |
| if (dev && (!(dev->flags & IFF_UP) || dev->type != ARPHRD_X25)) { |
| dev_put(dev); |
| dev = NULL; |
| } |
| |
| return dev; |
| } |
| |
| /** |
| * x25_get_route - Find a route given an X.25 address. |
| * @addr: - address to find a route for |
| * |
| * Find a route given an X.25 address. |
| */ |
| struct x25_route *x25_get_route(struct x25_address *addr) |
| { |
| struct x25_route *rt, *use = NULL; |
| struct list_head *entry; |
| |
| read_lock_bh(&x25_route_list_lock); |
| |
| list_for_each(entry, &x25_route_list) { |
| rt = list_entry(entry, struct x25_route, node); |
| |
| if (!memcmp(&rt->address, addr, rt->sigdigits)) { |
| if (!use) |
| use = rt; |
| else if (rt->sigdigits > use->sigdigits) |
| use = rt; |
| } |
| } |
| |
| if (use) |
| x25_route_hold(use); |
| |
| read_unlock_bh(&x25_route_list_lock); |
| return use; |
| } |
| |
| /* |
| * Handle the ioctls that control the routing functions. |
| */ |
| int x25_route_ioctl(unsigned int cmd, void __user *arg) |
| { |
| struct x25_route_struct rt; |
| struct net_device *dev; |
| int rc = -EINVAL; |
| |
| if (cmd != SIOCADDRT && cmd != SIOCDELRT) |
| goto out; |
| |
| rc = -EFAULT; |
| if (copy_from_user(&rt, arg, sizeof(rt))) |
| goto out; |
| |
| rc = -EINVAL; |
| if (rt.sigdigits > 15) |
| goto out; |
| |
| dev = x25_dev_get(rt.device); |
| if (!dev) |
| goto out; |
| |
| if (cmd == SIOCADDRT) |
| rc = x25_add_route(&rt.address, rt.sigdigits, dev); |
| else |
| rc = x25_del_route(&rt.address, rt.sigdigits, dev); |
| dev_put(dev); |
| out: |
| return rc; |
| } |
| |
| /* |
| * Release all memory associated with X.25 routing structures. |
| */ |
| void __exit x25_route_free(void) |
| { |
| struct x25_route *rt; |
| struct list_head *entry, *tmp; |
| |
| write_lock_bh(&x25_route_list_lock); |
| list_for_each_safe(entry, tmp, &x25_route_list) { |
| rt = list_entry(entry, struct x25_route, node); |
| __x25_remove_route(rt); |
| } |
| write_unlock_bh(&x25_route_list_lock); |
| } |