| // SPDX-License-Identifier: GPL-1.0+ |
| /* |
| * OHCI HCD (Host Controller Driver) for USB. |
| * |
| * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> |
| * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> |
| * |
| * [ Initialisation is based on Linus' ] |
| * [ uhci code and gregs ohci fragments ] |
| * [ (C) Copyright 1999 Linus Torvalds ] |
| * [ (C) Copyright 1999 Gregory P. Smith] |
| * |
| * PCI Bus Glue |
| * |
| * This file is licenced under the GPL. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/usb.h> |
| #include <linux/usb/hcd.h> |
| |
| #include "ohci.h" |
| #include "pci-quirks.h" |
| |
| #define DRIVER_DESC "OHCI PCI platform driver" |
| |
| static const char hcd_name[] = "ohci-pci"; |
| |
| |
| /*-------------------------------------------------------------------------*/ |
| |
| static int broken_suspend(struct usb_hcd *hcd) |
| { |
| device_init_wakeup(&hcd->self.root_hub->dev, 0); |
| return 0; |
| } |
| |
| /* AMD 756, for most chips (early revs), corrupts register |
| * values on read ... so enable the vendor workaround. |
| */ |
| static int ohci_quirk_amd756(struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci (hcd); |
| |
| ohci->flags = OHCI_QUIRK_AMD756; |
| ohci_dbg (ohci, "AMD756 erratum 4 workaround\n"); |
| |
| /* also erratum 10 (suspend/resume issues) */ |
| return broken_suspend(hcd); |
| } |
| |
| /* Apple's OHCI driver has a lot of bizarre workarounds |
| * for this chip. Evidently control and bulk lists |
| * can get confused. (B&W G3 models, and ...) |
| */ |
| static int ohci_quirk_opti(struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci (hcd); |
| |
| ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n"); |
| |
| return 0; |
| } |
| |
| /* Check for NSC87560. We have to look at the bridge (fn1) to |
| * identify the USB (fn2). This quirk might apply to more or |
| * even all NSC stuff. |
| */ |
| static int ohci_quirk_ns(struct usb_hcd *hcd) |
| { |
| struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
| struct pci_dev *b; |
| |
| b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1)); |
| if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO |
| && b->vendor == PCI_VENDOR_ID_NS) { |
| struct ohci_hcd *ohci = hcd_to_ohci (hcd); |
| |
| ohci->flags |= OHCI_QUIRK_SUPERIO; |
| ohci_dbg (ohci, "Using NSC SuperIO setup\n"); |
| } |
| pci_dev_put(b); |
| |
| return 0; |
| } |
| |
| /* Check for Compaq's ZFMicro chipset, which needs short |
| * delays before control or bulk queues get re-activated |
| * in finish_unlinks() |
| */ |
| static int ohci_quirk_zfmicro(struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci (hcd); |
| |
| ohci->flags |= OHCI_QUIRK_ZFMICRO; |
| ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n"); |
| |
| return 0; |
| } |
| |
| /* Check for Toshiba SCC OHCI which has big endian registers |
| * and little endian in memory data structures |
| */ |
| static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci (hcd); |
| |
| /* That chip is only present in the southbridge of some |
| * cell based platforms which are supposed to select |
| * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if |
| * that was the case though. |
| */ |
| #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO |
| ohci->flags |= OHCI_QUIRK_BE_MMIO; |
| ohci_dbg (ohci, "enabled big endian Toshiba quirk\n"); |
| return 0; |
| #else |
| ohci_err (ohci, "unsupported big endian Toshiba quirk\n"); |
| return -ENXIO; |
| #endif |
| } |
| |
| /* Check for NEC chip and apply quirk for allegedly lost interrupts. |
| */ |
| |
| static void ohci_quirk_nec_worker(struct work_struct *work) |
| { |
| struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work); |
| int status; |
| |
| status = ohci_restart(ohci); |
| if (status != 0) |
| ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n", |
| "ohci_restart", status); |
| } |
| |
| static int ohci_quirk_nec(struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci (hcd); |
| |
| ohci->flags |= OHCI_QUIRK_NEC; |
| INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker); |
| ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n"); |
| |
| return 0; |
| } |
| |
| static int ohci_quirk_amd700(struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| |
| if (usb_amd_find_chipset_info()) |
| ohci->flags |= OHCI_QUIRK_AMD_PLL; |
| |
| /* SB800 needs pre-fetch fix */ |
| if (usb_amd_prefetch_quirk()) { |
| ohci->flags |= OHCI_QUIRK_AMD_PREFETCH; |
| ohci_dbg(ohci, "enabled AMD prefetch quirk\n"); |
| } |
| |
| ohci->flags |= OHCI_QUIRK_GLOBAL_SUSPEND; |
| return 0; |
| } |
| |
| static int ohci_quirk_qemu(struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci(hcd); |
| |
| ohci->flags |= OHCI_QUIRK_QEMU; |
| ohci_dbg(ohci, "enabled qemu quirk\n"); |
| return 0; |
| } |
| |
| /* List of quirks for OHCI */ |
| static const struct pci_device_id ohci_pci_quirks[] = { |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c), |
| .driver_data = (unsigned long)ohci_quirk_amd756, |
| }, |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861), |
| .driver_data = (unsigned long)ohci_quirk_opti, |
| }, |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID), |
| .driver_data = (unsigned long)ohci_quirk_ns, |
| }, |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8), |
| .driver_data = (unsigned long)ohci_quirk_zfmicro, |
| }, |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6), |
| .driver_data = (unsigned long)ohci_quirk_toshiba_scc, |
| }, |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB), |
| .driver_data = (unsigned long)ohci_quirk_nec, |
| }, |
| { |
| /* Toshiba portege 4000 */ |
| .vendor = PCI_VENDOR_ID_AL, |
| .device = 0x5237, |
| .subvendor = PCI_VENDOR_ID_TOSHIBA, |
| .subdevice = 0x0004, |
| .driver_data = (unsigned long) broken_suspend, |
| }, |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152), |
| .driver_data = (unsigned long) broken_suspend, |
| }, |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397), |
| .driver_data = (unsigned long)ohci_quirk_amd700, |
| }, |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398), |
| .driver_data = (unsigned long)ohci_quirk_amd700, |
| }, |
| { |
| PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399), |
| .driver_data = (unsigned long)ohci_quirk_amd700, |
| }, |
| { |
| .vendor = PCI_VENDOR_ID_APPLE, |
| .device = 0x003f, |
| .subvendor = PCI_SUBVENDOR_ID_REDHAT_QUMRANET, |
| .subdevice = PCI_SUBDEVICE_ID_QEMU, |
| .driver_data = (unsigned long)ohci_quirk_qemu, |
| }, |
| |
| /* FIXME for some of the early AMD 760 southbridges, OHCI |
| * won't work at all. blacklist them. |
| */ |
| |
| {}, |
| }; |
| |
| static int ohci_pci_reset (struct usb_hcd *hcd) |
| { |
| struct ohci_hcd *ohci = hcd_to_ohci (hcd); |
| struct pci_dev *pdev = to_pci_dev(hcd->self.controller); |
| int ret = 0; |
| |
| if (hcd->self.controller) { |
| const struct pci_device_id *quirk_id; |
| |
| quirk_id = pci_match_id(ohci_pci_quirks, pdev); |
| if (quirk_id != NULL) { |
| int (*quirk)(struct usb_hcd *ohci); |
| quirk = (void *)quirk_id->driver_data; |
| ret = quirk(hcd); |
| } |
| } |
| |
| if (ret == 0) |
| ret = ohci_setup(hcd); |
| /* |
| * After ohci setup RWC may not be set for add-in PCI cards. |
| * This transfers PCI PM wakeup capabilities. |
| */ |
| if (device_can_wakeup(&pdev->dev)) |
| ohci->hc_control |= OHCI_CTRL_RWC; |
| return ret; |
| } |
| |
| static struct hc_driver __read_mostly ohci_pci_hc_driver; |
| |
| static const struct ohci_driver_overrides pci_overrides __initconst = { |
| .product_desc = "OHCI PCI host controller", |
| .reset = ohci_pci_reset, |
| }; |
| |
| static const struct pci_device_id pci_ids [] = { { |
| /* handle any USB OHCI controller */ |
| PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0), |
| .driver_data = (unsigned long) &ohci_pci_hc_driver, |
| }, { |
| /* The device in the ConneXT I/O hub has no class reg */ |
| PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI), |
| .driver_data = (unsigned long) &ohci_pci_hc_driver, |
| }, { /* end: all zeroes */ } |
| }; |
| MODULE_DEVICE_TABLE (pci, pci_ids); |
| |
| /* pci driver glue; this is a "new style" PCI driver module */ |
| static struct pci_driver ohci_pci_driver = { |
| .name = (char *) hcd_name, |
| .id_table = pci_ids, |
| |
| .probe = usb_hcd_pci_probe, |
| .remove = usb_hcd_pci_remove, |
| .shutdown = usb_hcd_pci_shutdown, |
| |
| #ifdef CONFIG_PM |
| .driver = { |
| .pm = &usb_hcd_pci_pm_ops |
| }, |
| #endif |
| }; |
| |
| static int __init ohci_pci_init(void) |
| { |
| if (usb_disabled()) |
| return -ENODEV; |
| |
| pr_info("%s: " DRIVER_DESC "\n", hcd_name); |
| |
| ohci_init_driver(&ohci_pci_hc_driver, &pci_overrides); |
| |
| #ifdef CONFIG_PM |
| /* Entries for the PCI suspend/resume callbacks are special */ |
| ohci_pci_hc_driver.pci_suspend = ohci_suspend; |
| ohci_pci_hc_driver.pci_resume = ohci_resume; |
| #endif |
| |
| return pci_register_driver(&ohci_pci_driver); |
| } |
| module_init(ohci_pci_init); |
| |
| static void __exit ohci_pci_cleanup(void) |
| { |
| pci_unregister_driver(&ohci_pci_driver); |
| } |
| module_exit(ohci_pci_cleanup); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| MODULE_SOFTDEP("pre: ehci_pci"); |