| /* |
| * Copyright (C) 2016 Marvell Technology Group Ltd. |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPLv2 or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /* |
| * Device Tree file for Marvell Armada AP806. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| /dts-v1/; |
| |
| / { |
| model = "Marvell Armada AP806"; |
| compatible = "marvell,armada-ap806"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| gpio0 = &ap_gpio; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| ap806 { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| config-space@f0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| ranges = <0x0 0x0 0xf0000000 0x1000000>; |
| |
| gic: interrupt-controller@210000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| interrupt-controller; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; |
| reg = <0x210000 0x10000>, |
| <0x220000 0x20000>, |
| <0x240000 0x20000>, |
| <0x260000 0x20000>; |
| |
| gic_v2m0: v2m@280000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x280000 0x1000>; |
| arm,msi-base-spi = <160>; |
| arm,msi-num-spis = <32>; |
| }; |
| gic_v2m1: v2m@290000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x290000 0x1000>; |
| arm,msi-base-spi = <192>; |
| arm,msi-num-spis = <32>; |
| }; |
| gic_v2m2: v2m@2a0000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x2a0000 0x1000>; |
| arm,msi-base-spi = <224>; |
| arm,msi-num-spis = <32>; |
| }; |
| gic_v2m3: v2m@2b0000 { |
| compatible = "arm,gic-v2m-frame"; |
| msi-controller; |
| reg = <0x2b0000 0x1000>; |
| arm,msi-base-spi = <256>; |
| arm,msi-num-spis = <32>; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a72-pmu"; |
| interrupt-parent = <&pic>; |
| interrupts = <17>; |
| }; |
| |
| odmi: odmi@300000 { |
| compatible = "marvell,odmi-controller"; |
| interrupt-controller; |
| msi-controller; |
| marvell,odmi-frames = <4>; |
| reg = <0x300000 0x4000>, |
| <0x304000 0x4000>, |
| <0x308000 0x4000>, |
| <0x30C000 0x4000>; |
| marvell,spi-base = <128>, <136>, <144>, <152>; |
| }; |
| |
| gicp: gicp@3f0040 { |
| compatible = "marvell,ap806-gicp"; |
| reg = <0x3f0040 0x10>; |
| marvell,spi-ranges = <64 64>, <288 64>; |
| msi-controller; |
| }; |
| |
| pic: interrupt-controller@3f0100 { |
| compatible = "marvell,armada-8k-pic"; |
| reg = <0x3f0100 0x10>; |
| #interrupt-cells = <1>; |
| interrupt-controller; |
| interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| xor@400000 { |
| compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| reg = <0x400000 0x1000>, |
| <0x410000 0x1000>; |
| msi-parent = <&gic_v2m0>; |
| clocks = <&ap_clk 3>; |
| dma-coherent; |
| }; |
| |
| xor@420000 { |
| compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| reg = <0x420000 0x1000>, |
| <0x430000 0x1000>; |
| msi-parent = <&gic_v2m0>; |
| clocks = <&ap_clk 3>; |
| dma-coherent; |
| }; |
| |
| xor@440000 { |
| compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| reg = <0x440000 0x1000>, |
| <0x450000 0x1000>; |
| msi-parent = <&gic_v2m0>; |
| clocks = <&ap_clk 3>; |
| dma-coherent; |
| }; |
| |
| xor@460000 { |
| compatible = "marvell,armada-7k-xor", "marvell,xor-v2"; |
| reg = <0x460000 0x1000>, |
| <0x470000 0x1000>; |
| msi-parent = <&gic_v2m0>; |
| clocks = <&ap_clk 3>; |
| dma-coherent; |
| }; |
| |
| spi0: spi@510600 { |
| compatible = "marvell,armada-380-spi"; |
| reg = <0x510600 0x50>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&ap_clk 3>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@511000 { |
| compatible = "marvell,mv78230-i2c"; |
| reg = <0x511000 0x20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; |
| timeout-ms = <1000>; |
| clocks = <&ap_clk 3>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@512000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x512000 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&ap_clk 3>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@512100 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x512100 0x100>; |
| reg-shift = <2>; |
| interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; |
| reg-io-width = <1>; |
| clocks = <&ap_clk 3>; |
| status = "disabled"; |
| |
| }; |
| |
| ap_sdhci0: sdhci@6e0000 { |
| compatible = "marvell,armada-ap806-sdhci"; |
| reg = <0x6e0000 0x300>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| clock-names = "core"; |
| clocks = <&ap_clk 4>; |
| dma-coherent; |
| marvell,xenon-phy-slow-mode; |
| status = "disabled"; |
| }; |
| |
| ap_syscon: system-controller@6f4000 { |
| compatible = "syscon", "simple-mfd"; |
| reg = <0x6f4000 0x1000>; |
| |
| ap_clk: clock { |
| compatible = "marvell,ap806-clock"; |
| #clock-cells = <1>; |
| }; |
| |
| ap_pinctrl: pinctrl { |
| compatible = "marvell,ap806-pinctrl"; |
| }; |
| |
| ap_gpio: gpio { |
| compatible = "marvell,armada-8k-gpio"; |
| offset = <0x1040>; |
| ngpios = <20>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = <&ap_pinctrl 0 0 20>; |
| }; |
| }; |
| }; |
| }; |
| }; |
