blob: f6d6c61f796a463abfd8dfb2be0129c6c2579740 [file] [log] [blame]
/*
* Copyright 2016 Advanced Micro Devices, Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*
*/
#ifndef SMU9_DRIVER_IF_H
#define SMU9_DRIVER_IF_H
#include "smu9.h"
/**** IMPORTANT ***
* SMU TEAM: Always increment the interface version if
* any structure is changed in this file
*/
#define SMU9_DRIVER_IF_VERSION 0xE
#define PPTABLE_V10_SMU_VERSION 1
#define NUM_GFXCLK_DPM_LEVELS 8
#define NUM_UVD_DPM_LEVELS 8
#define NUM_VCE_DPM_LEVELS 8
#define NUM_MP0CLK_DPM_LEVELS 8
#define NUM_UCLK_DPM_LEVELS 4
#define NUM_SOCCLK_DPM_LEVELS 8
#define NUM_DCEFCLK_DPM_LEVELS 8
#define NUM_LINK_LEVELS 2
#define MAX_GFXCLK_DPM_LEVEL (NUM_GFXCLK_DPM_LEVELS - 1)
#define MAX_UVD_DPM_LEVEL (NUM_UVD_DPM_LEVELS - 1)
#define MAX_VCE_DPM_LEVEL (NUM_VCE_DPM_LEVELS - 1)
#define MAX_MP0CLK_DPM_LEVEL (NUM_MP0CLK_DPM_LEVELS - 1)
#define MAX_UCLK_DPM_LEVEL (NUM_UCLK_DPM_LEVELS - 1)
#define MAX_SOCCLK_DPM_LEVEL (NUM_SOCCLK_DPM_LEVELS - 1)
#define MAX_DCEFCLK_DPM_LEVEL (NUM_DCEFCLK_DPM_LEVELS - 1)
#define MAX_LINK_DPM_LEVEL (NUM_LINK_LEVELS - 1)
#define MIN_GFXCLK_DPM_LEVEL 0
#define MIN_UVD_DPM_LEVEL 0
#define MIN_VCE_DPM_LEVEL 0
#define MIN_MP0CLK_DPM_LEVEL 0
#define MIN_UCLK_DPM_LEVEL 0
#define MIN_SOCCLK_DPM_LEVEL 0
#define MIN_DCEFCLK_DPM_LEVEL 0
#define MIN_LINK_DPM_LEVEL 0
#define NUM_EVV_VOLTAGE_LEVELS 8
#define MAX_EVV_VOLTAGE_LEVEL (NUM_EVV_VOLTAGE_LEVELS - 1)
#define MIN_EVV_VOLTAGE_LEVEL 0
#define NUM_PSP_LEVEL_MAP 4
/* Gemini Modes */
#define PPSMC_GeminiModeNone 0 /* Single GPU board */
#define PPSMC_GeminiModeMaster 1 /* Master GPU on a Gemini board */
#define PPSMC_GeminiModeSlave 2 /* Slave GPU on a Gemini board */
/* Voltage Modes for DPMs */
#define VOLTAGE_MODE_AVFS_INTERPOLATE 0
#define VOLTAGE_MODE_AVFS_WORST_CASE 1
#define VOLTAGE_MODE_STATIC 2
typedef struct {
uint32_t FbMult; /* Feedback Multiplier, bit 8:0 int, bit 15:12 post_div, bit 31:16 frac */
uint32_t SsFbMult; /* Spread FB Mult: bit 8:0 int, bit 31:16 frac */
uint16_t SsSlewFrac;
uint8_t SsOn;
uint8_t Did; /* DID */
} PllSetting_t;
typedef struct {
int32_t a0;
int32_t a1;
int32_t a2;
uint8_t a0_shift;
uint8_t a1_shift;
uint8_t a2_shift;
uint8_t padding;
} GbVdroopTable_t;
typedef struct {
int32_t m1;
int32_t m2;
int32_t b;
uint8_t m1_shift;
uint8_t m2_shift;
uint8_t b_shift;
uint8_t padding;
} QuadraticInt_t;
#define NUM_DSPCLK_LEVELS 8
typedef enum {
DSPCLK_DCEFCLK = 0,
DSPCLK_DISPCLK,
DSPCLK_PIXCLK,
DSPCLK_PHYCLK,
DSPCLK_COUNT,
} DSPCLK_e;
typedef struct {
uint16_t Freq; /* in MHz */
uint16_t Vid; /* min voltage in SVI2 VID */
} DisplayClockTable_t;
typedef struct {
/* PowerTune */
uint16_t SocketPowerLimit; /* Watts */
uint16_t TdcLimit; /* Amps */
uint16_t EdcLimit; /* Amps */
uint16_t TedgeLimit; /* Celcius */
uint16_t ThotspotLimit; /* Celcius */
uint16_t ThbmLimit; /* Celcius */
uint16_t Tvr_socLimit; /* Celcius */
uint16_t Tvr_memLimit; /* Celcius */
uint16_t Tliquid1Limit; /* Celcius */
uint16_t Tliquid2Limit; /* Celcius */
uint16_t TplxLimit; /* Celcius */
uint16_t LoadLineResistance; /* in mOhms */
uint32_t FitLimit; /* Failures in time (failures per million parts over the defined lifetime) */
/* External Component Communication Settings */
uint8_t Liquid1_I2C_address;
uint8_t Liquid2_I2C_address;
uint8_t Vr_I2C_address;
uint8_t Plx_I2C_address;
uint8_t GeminiMode;
uint8_t spare17[3];
uint32_t GeminiApertureHigh;
uint32_t GeminiApertureLow;
uint8_t Liquid_I2C_LineSCL;
uint8_t Liquid_I2C_LineSDA;
uint8_t Vr_I2C_LineSCL;
uint8_t Vr_I2C_LineSDA;
uint8_t Plx_I2C_LineSCL;
uint8_t Plx_I2C_LineSDA;
uint8_t paddingx[2];
/* ULV Settings */
uint8_t UlvOffsetVid; /* SVI2 VID */
uint8_t UlvSmnclkDid; /* DID for ULV mode. 0 means CLK will not be modified in ULV. */
uint8_t UlvMp1clkDid; /* DID for ULV mode. 0 means CLK will not be modified in ULV. */
uint8_t UlvGfxclkBypass; /* 1 to turn off/bypass Gfxclk during ULV, 0 to leave Gfxclk on during ULV */
/* VDDCR_SOC Voltages */
uint8_t SocVid[NUM_EVV_VOLTAGE_LEVELS];
/* This is the minimum voltage needed to run the SOC. */
uint8_t MinVoltageVid; /* Minimum Voltage ("Vmin") of ASIC */
uint8_t MaxVoltageVid; /* Maximum Voltage allowable */
uint8_t MaxVidStep; /* Max VID step that SMU will request. Multiple steps are taken if voltage change exceeds this value. */
uint8_t padding8;
uint8_t UlvPhaseSheddingPsi0; /* set this to 1 to set PSI0/1 to 1 in ULV mode */
uint8_t UlvPhaseSheddingPsi1; /* set this to 1 to set PSI0/1 to 1 in ULV mode */
uint8_t padding8_2[2];
/* SOC Frequencies */
PllSetting_t GfxclkLevel [NUM_GFXCLK_DPM_LEVELS];
uint8_t SocclkDid [NUM_SOCCLK_DPM_LEVELS]; /* DID */
uint8_t SocDpmVoltageIndex [NUM_SOCCLK_DPM_LEVELS];
uint8_t VclkDid [NUM_UVD_DPM_LEVELS]; /* DID */
uint8_t DclkDid [NUM_UVD_DPM_LEVELS]; /* DID */
uint8_t UvdDpmVoltageIndex [NUM_UVD_DPM_LEVELS];
uint8_t EclkDid [NUM_VCE_DPM_LEVELS]; /* DID */
uint8_t VceDpmVoltageIndex [NUM_VCE_DPM_LEVELS];
uint8_t Mp0clkDid [NUM_MP0CLK_DPM_LEVELS]; /* DID */
uint8_t Mp0DpmVoltageIndex [NUM_MP0CLK_DPM_LEVELS];
DisplayClockTable_t DisplayClockTable[DSPCLK_COUNT][NUM_DSPCLK_LEVELS];
QuadraticInt_t DisplayClock2Gfxclk[DSPCLK_COUNT];
uint8_t GfxDpmVoltageMode;
uint8_t SocDpmVoltageMode;
uint8_t UclkDpmVoltageMode;
uint8_t UvdDpmVoltageMode;
uint8_t VceDpmVoltageMode;
uint8_t Mp0DpmVoltageMode;
uint8_t DisplayDpmVoltageMode;
uint8_t padding8_3;
uint16_t GfxclkSlewRate;
uint16_t padding;
uint32_t LowGfxclkInterruptThreshold; /* in units of 10KHz */
/* Alpha parameters for clock averages. ("255"=1) */
uint8_t GfxclkAverageAlpha;
uint8_t SocclkAverageAlpha;
uint8_t UclkAverageAlpha;
uint8_t GfxActivityAverageAlpha;
/* UCLK States */
uint8_t MemVid[NUM_UCLK_DPM_LEVELS]; /* VID */
PllSetting_t UclkLevel[NUM_UCLK_DPM_LEVELS]; /* Full PLL settings */
uint8_t MemSocVoltageIndex[NUM_UCLK_DPM_LEVELS];
uint8_t LowestUclkReservedForUlv; /* Set this to 1 if UCLK DPM0 is reserved for ULV-mode only */
uint8_t paddingUclk[3];
uint16_t NumMemoryChannels; /* Used for memory bandwidth calculations */
uint16_t MemoryChannelWidth; /* Used for memory bandwidth calculations */
/* CKS Settings */
uint8_t CksEnable[NUM_GFXCLK_DPM_LEVELS];
uint8_t CksVidOffset[NUM_GFXCLK_DPM_LEVELS];
/* MP0 Mapping Table */
uint8_t PspLevelMap[NUM_PSP_LEVEL_MAP];
/* Link DPM Settings */
uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; /* 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 */
uint8_t PcieLaneCount[NUM_LINK_LEVELS]; /* 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16 */
uint8_t LclkDid[NUM_LINK_LEVELS]; /* Leave at 0 to use hardcoded values in FW */
uint8_t paddingLinkDpm[2];
/* Fan Control */
uint16_t FanStopTemp; /* Celcius */
uint16_t FanStartTemp; /* Celcius */
uint16_t FanGainEdge;
uint16_t FanGainHotspot;
uint16_t FanGainLiquid;
uint16_t FanGainVrVddc;
uint16_t FanGainVrMvdd;
uint16_t FanGainPlx;
uint16_t FanGainHbm;
uint16_t FanPwmMin;
uint16_t FanAcousticLimitRpm;
uint16_t FanThrottlingRpm;
uint16_t FanMaximumRpm;
uint16_t FanTargetTemperature;
uint16_t FanTargetGfxclk;
uint8_t FanZeroRpmEnable;
uint8_t FanSpare;
/* The following are AFC override parameters. Leave at 0 to use FW defaults. */
int16_t FuzzyFan_ErrorSetDelta;
int16_t FuzzyFan_ErrorRateSetDelta;
int16_t FuzzyFan_PwmSetDelta;
uint16_t FuzzyFan_Reserved;
/* GPIO Settings */
uint8_t AcDcGpio; /* GPIO pin configured for AC/DC switching */
uint8_t AcDcPolarity; /* GPIO polarity for AC/DC switching */
uint8_t VR0HotGpio; /* GPIO pin configured for VR0 HOT event */
uint8_t VR0HotPolarity; /* GPIO polarity for VR0 HOT event */
uint8_t VR1HotGpio; /* GPIO pin configured for VR1 HOT event */
uint8_t VR1HotPolarity; /* GPIO polarity for VR1 HOT event */
uint8_t Padding1; /* replace GPIO pin configured for CTF */
uint8_t Padding2; /* replace GPIO polarity for CTF */
/* LED Display Settings */
uint8_t LedPin0; /* GPIO number for LedPin[0] */
uint8_t LedPin1; /* GPIO number for LedPin[1] */
uint8_t LedPin2; /* GPIO number for LedPin[2] */
uint8_t padding8_4;
/* AVFS */
uint8_t OverrideBtcGbCksOn;
uint8_t OverrideAvfsGbCksOn;
uint8_t PaddingAvfs8[2];
GbVdroopTable_t BtcGbVdroopTableCksOn;
GbVdroopTable_t BtcGbVdroopTableCksOff;
QuadraticInt_t AvfsGbCksOn; /* Replacement equation */
QuadraticInt_t AvfsGbCksOff; /* Replacement equation */
uint8_t StaticVoltageOffsetVid[NUM_GFXCLK_DPM_LEVELS]; /* This values are added on to the final voltage calculation */
/* Ageing Guardband Parameters */
uint32_t AConstant[3];
uint16_t DC_tol_sigma;
uint16_t Platform_mean;
uint16_t Platform_sigma;
uint16_t PSM_Age_CompFactor;
uint32_t DpmLevelPowerDelta;
uint8_t EnableBoostState;
uint8_t AConstant_Shift;
uint8_t DC_tol_sigma_Shift;
uint8_t PSM_Age_CompFactor_Shift;
uint16_t BoostStartTemperature;
uint16_t BoostStopTemperature;
PllSetting_t GfxBoostState;
uint8_t AcgEnable[NUM_GFXCLK_DPM_LEVELS];
GbVdroopTable_t AcgBtcGbVdroopTable;
QuadraticInt_t AcgAvfsGb;
uint32_t Reserved[4];
/* Padding - ignore */
uint32_t MmHubPadding[7]; /* SMU internal use */
} PPTable_t;
typedef struct {
uint16_t MinClock; // This is either DCEFCLK or SOCCLK (in MHz)
uint16_t MaxClock; // This is either DCEFCLK or SOCCLK (in MHz)
uint16_t MinUclk;
uint16_t MaxUclk;
uint8_t WmSetting;
uint8_t Padding[3];
} WatermarkRowGeneric_t;
#define NUM_WM_RANGES 4
typedef enum {
WM_SOCCLK = 0,
WM_DCEFCLK,
WM_COUNT,
} WM_CLOCK_e;
typedef struct {
/* Watermarks */
WatermarkRowGeneric_t WatermarkRow[WM_COUNT][NUM_WM_RANGES];
uint32_t MmHubPadding[7]; /* SMU internal use */
} Watermarks_t;
#ifdef PPTABLE_V10_SMU_VERSION
typedef struct {
float AvfsGbCksOn[NUM_GFXCLK_DPM_LEVELS];
float AcBtcGbCksOn[NUM_GFXCLK_DPM_LEVELS];
float AvfsGbCksOff[NUM_GFXCLK_DPM_LEVELS];
float AcBtcGbCksOff[NUM_GFXCLK_DPM_LEVELS];
float DcBtcGb;
uint32_t MmHubPadding[7]; /* SMU internal use */
} AvfsTable_t;
#else
typedef struct {
uint32_t AvfsGbCksOn[NUM_GFXCLK_DPM_LEVELS];
uint32_t AcBtcGbCksOn[NUM_GFXCLK_DPM_LEVELS];
uint32_t AvfsGbCksOff[NUM_GFXCLK_DPM_LEVELS];
uint32_t AcBtcGbCksOff[NUM_GFXCLK_DPM_LEVELS];
uint32_t DcBtcGb;
uint32_t MmHubPadding[7]; /* SMU internal use */
} AvfsTable_t;
#endif
typedef struct {
uint16_t avgPsmCount[30];
uint16_t minPsmCount[30];
float avgPsmVoltage[30];
float minPsmVoltage[30];
uint32_t MmHubPadding[7]; /* SMU internal use */
} AvfsDebugTable_t;
typedef struct {
uint8_t AvfsEn;
uint8_t AvfsVersion;
uint8_t Padding[2];
int32_t VFT0_m1; /* Q8.24 */
int32_t VFT0_m2; /* Q12.12 */
int32_t VFT0_b; /* Q32 */
int32_t VFT1_m1; /* Q8.16 */
int32_t VFT1_m2; /* Q12.12 */
int32_t VFT1_b; /* Q32 */
int32_t VFT2_m1; /* Q8.16 */
int32_t VFT2_m2; /* Q12.12 */
int32_t VFT2_b; /* Q32 */
int32_t AvfsGb0_m1; /* Q8.16 */
int32_t AvfsGb0_m2; /* Q12.12 */
int32_t AvfsGb0_b; /* Q32 */
int32_t AcBtcGb_m1; /* Q8.24 */
int32_t AcBtcGb_m2; /* Q12.12 */
int32_t AcBtcGb_b; /* Q32 */
uint32_t AvfsTempCold;
uint32_t AvfsTempMid;
uint32_t AvfsTempHot;
uint32_t InversionVoltage; /* in mV with 2 fractional bits */
int32_t P2V_m1; /* Q8.24 */
int32_t P2V_m2; /* Q12.12 */
int32_t P2V_b; /* Q32 */
uint32_t P2VCharzFreq; /* in 10KHz units */
uint32_t EnabledAvfsModules;
uint32_t MmHubPadding[7]; /* SMU internal use */
} AvfsFuseOverride_t;
/* These defines are used with the following messages:
* SMC_MSG_TransferTableDram2Smu
* SMC_MSG_TransferTableSmu2Dram
*/
#define TABLE_PPTABLE 0
#define TABLE_WATERMARKS 1
#define TABLE_AVFS 2
#define TABLE_AVFS_PSM_DEBUG 3
#define TABLE_AVFS_FUSE_OVERRIDE 4
#define TABLE_PMSTATUSLOG 5
#define TABLE_COUNT 6
/* These defines are used with the SMC_MSG_SetUclkFastSwitch message. */
#define UCLK_SWITCH_SLOW 0
#define UCLK_SWITCH_FAST 1
/* GFX DIDT Configuration */
#define SQ_Enable_MASK 0x1
#define SQ_IR_MASK 0x2
#define SQ_PCC_MASK 0x4
#define SQ_EDC_MASK 0x8
#define TCP_Enable_MASK 0x100
#define TCP_IR_MASK 0x200
#define TCP_PCC_MASK 0x400
#define TCP_EDC_MASK 0x800
#define TD_Enable_MASK 0x10000
#define TD_IR_MASK 0x20000
#define TD_PCC_MASK 0x40000
#define TD_EDC_MASK 0x80000
#define DB_Enable_MASK 0x1000000
#define DB_IR_MASK 0x2000000
#define DB_PCC_MASK 0x4000000
#define DB_EDC_MASK 0x8000000
#define SQ_Enable_SHIFT 0
#define SQ_IR_SHIFT 1
#define SQ_PCC_SHIFT 2
#define SQ_EDC_SHIFT 3
#define TCP_Enable_SHIFT 8
#define TCP_IR_SHIFT 9
#define TCP_PCC_SHIFT 10
#define TCP_EDC_SHIFT 11
#define TD_Enable_SHIFT 16
#define TD_IR_SHIFT 17
#define TD_PCC_SHIFT 18
#define TD_EDC_SHIFT 19
#define DB_Enable_SHIFT 24
#define DB_IR_SHIFT 25
#define DB_PCC_SHIFT 26
#define DB_EDC_SHIFT 27
#define REMOVE_FMAX_MARGIN_BIT 0x0
#define REMOVE_DCTOL_MARGIN_BIT 0x1
#define REMOVE_PLATFORM_MARGIN_BIT 0x2
#endif