| // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) |
| // |
| // This file is provided under a dual BSD/GPLv2 license. When using or |
| // redistributing this file, you may do so under either license. |
| // |
| // Copyright(c) 2018 Intel Corporation. All rights reserved. |
| // |
| // Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> |
| // |
| |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| #include <sound/soc.h> |
| #include <sound/sof.h> |
| #include "sof-priv.h" |
| #include "ops.h" |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES) |
| #include "probe.h" |
| #endif |
| |
| /* see SOF_DBG_ flags */ |
| int sof_core_debug; |
| module_param_named(sof_debug, sof_core_debug, int, 0444); |
| MODULE_PARM_DESC(sof_debug, "SOF core debug options (0x0 all off)"); |
| |
| /* SOF defaults if not provided by the platform in ms */ |
| #define TIMEOUT_DEFAULT_IPC_MS 500 |
| #define TIMEOUT_DEFAULT_BOOT_MS 2000 |
| |
| /* |
| * FW Panic/fault handling. |
| */ |
| |
| struct sof_panic_msg { |
| u32 id; |
| const char *msg; |
| }; |
| |
| /* standard FW panic types */ |
| static const struct sof_panic_msg panic_msg[] = { |
| {SOF_IPC_PANIC_MEM, "out of memory"}, |
| {SOF_IPC_PANIC_WORK, "work subsystem init failed"}, |
| {SOF_IPC_PANIC_IPC, "IPC subsystem init failed"}, |
| {SOF_IPC_PANIC_ARCH, "arch init failed"}, |
| {SOF_IPC_PANIC_PLATFORM, "platform init failed"}, |
| {SOF_IPC_PANIC_TASK, "scheduler init failed"}, |
| {SOF_IPC_PANIC_EXCEPTION, "runtime exception"}, |
| {SOF_IPC_PANIC_DEADLOCK, "deadlock"}, |
| {SOF_IPC_PANIC_STACK, "stack overflow"}, |
| {SOF_IPC_PANIC_IDLE, "can't enter idle"}, |
| {SOF_IPC_PANIC_WFI, "invalid wait state"}, |
| {SOF_IPC_PANIC_ASSERT, "assertion failed"}, |
| }; |
| |
| /* |
| * helper to be called from .dbg_dump callbacks. No error code is |
| * provided, it's left as an exercise for the caller of .dbg_dump |
| * (typically IPC or loader) |
| */ |
| void snd_sof_get_status(struct snd_sof_dev *sdev, u32 panic_code, |
| u32 tracep_code, void *oops, |
| struct sof_ipc_panic_info *panic_info, |
| void *stack, size_t stack_words) |
| { |
| u32 code; |
| int i; |
| |
| /* is firmware dead ? */ |
| if ((panic_code & SOF_IPC_PANIC_MAGIC_MASK) != SOF_IPC_PANIC_MAGIC) { |
| dev_err(sdev->dev, "error: unexpected fault 0x%8.8x trace 0x%8.8x\n", |
| panic_code, tracep_code); |
| return; /* no fault ? */ |
| } |
| |
| code = panic_code & (SOF_IPC_PANIC_MAGIC_MASK | SOF_IPC_PANIC_CODE_MASK); |
| |
| for (i = 0; i < ARRAY_SIZE(panic_msg); i++) { |
| if (panic_msg[i].id == code) { |
| dev_err(sdev->dev, "error: %s\n", panic_msg[i].msg); |
| dev_err(sdev->dev, "error: trace point %8.8x\n", |
| tracep_code); |
| goto out; |
| } |
| } |
| |
| /* unknown error */ |
| dev_err(sdev->dev, "error: unknown reason %8.8x\n", panic_code); |
| dev_err(sdev->dev, "error: trace point %8.8x\n", tracep_code); |
| |
| out: |
| dev_err(sdev->dev, "error: panic at %s:%d\n", |
| panic_info->filename, panic_info->linenum); |
| sof_oops(sdev, oops); |
| sof_stack(sdev, oops, stack, stack_words); |
| } |
| EXPORT_SYMBOL(snd_sof_get_status); |
| |
| /* |
| * FW Boot State Transition Diagram |
| * |
| * +-----------------------------------------------------------------------+ |
| * | | |
| * ------------------ ------------------ | |
| * | | | | | |
| * | BOOT_FAILED | | READY_FAILED |-------------------------+ | |
| * | | | | | | |
| * ------------------ ------------------ | | |
| * ^ ^ | | |
| * | | | | |
| * (FW Boot Timeout) (FW_READY FAIL) | | |
| * | | | | |
| * | | | | |
| * ------------------ | ------------------ | | |
| * | | | | | | | |
| * | IN_PROGRESS |---------------+------------->| COMPLETE | | | |
| * | | (FW Boot OK) (FW_READY OK) | | | | |
| * ------------------ ------------------ | | |
| * ^ | | | |
| * | | | | |
| * (FW Loading OK) (System Suspend/Runtime Suspend) |
| * | | | | |
| * | | | | |
| * ------------------ ------------------ | | | |
| * | | | |<-----+ | | |
| * | PREPARE | | NOT_STARTED |<---------------------+ | |
| * | | | |<---------------------------+ |
| * ------------------ ------------------ |
| * | ^ | ^ |
| * | | | | |
| * | +-----------------------+ | |
| * | (DSP Probe OK) | |
| * | | |
| * | | |
| * +------------------------------------+ |
| * (System Suspend/Runtime Suspend) |
| */ |
| |
| static int sof_probe_continue(struct snd_sof_dev *sdev) |
| { |
| struct snd_sof_pdata *plat_data = sdev->pdata; |
| int ret; |
| |
| /* probe the DSP hardware */ |
| ret = snd_sof_probe(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: failed to probe DSP %d\n", ret); |
| return ret; |
| } |
| |
| sdev->fw_state = SOF_FW_BOOT_PREPARE; |
| |
| /* check machine info */ |
| ret = sof_machine_check(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: failed to get machine info %d\n", |
| ret); |
| goto dbg_err; |
| } |
| |
| /* set up platform component driver */ |
| snd_sof_new_platform_drv(sdev); |
| |
| /* register any debug/trace capabilities */ |
| ret = snd_sof_dbg_init(sdev); |
| if (ret < 0) { |
| /* |
| * debugfs issues are suppressed in snd_sof_dbg_init() since |
| * we cannot rely on debugfs |
| * here we trap errors due to memory allocation only. |
| */ |
| dev_err(sdev->dev, "error: failed to init DSP trace/debug %d\n", |
| ret); |
| goto dbg_err; |
| } |
| |
| /* init the IPC */ |
| sdev->ipc = snd_sof_ipc_init(sdev); |
| if (!sdev->ipc) { |
| dev_err(sdev->dev, "error: failed to init DSP IPC %d\n", ret); |
| goto ipc_err; |
| } |
| |
| /* load the firmware */ |
| ret = snd_sof_load_firmware(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: failed to load DSP firmware %d\n", |
| ret); |
| goto fw_load_err; |
| } |
| |
| sdev->fw_state = SOF_FW_BOOT_IN_PROGRESS; |
| |
| /* |
| * Boot the firmware. The FW boot status will be modified |
| * in snd_sof_run_firmware() depending on the outcome. |
| */ |
| ret = snd_sof_run_firmware(sdev); |
| if (ret < 0) { |
| dev_err(sdev->dev, "error: failed to boot DSP firmware %d\n", |
| ret); |
| goto fw_run_err; |
| } |
| |
| if (IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE) || |
| (sof_core_debug & SOF_DBG_ENABLE_TRACE)) { |
| sdev->dtrace_is_supported = true; |
| |
| /* init DMA trace */ |
| ret = snd_sof_init_trace(sdev); |
| if (ret < 0) { |
| /* non fatal */ |
| dev_warn(sdev->dev, |
| "warning: failed to initialize trace %d\n", |
| ret); |
| } |
| } else { |
| dev_dbg(sdev->dev, "SOF firmware trace disabled\n"); |
| } |
| |
| /* hereafter all FW boot flows are for PM reasons */ |
| sdev->first_boot = false; |
| |
| /* now register audio DSP platform driver and dai */ |
| ret = devm_snd_soc_register_component(sdev->dev, &sdev->plat_drv, |
| sof_ops(sdev)->drv, |
| sof_ops(sdev)->num_drv); |
| if (ret < 0) { |
| dev_err(sdev->dev, |
| "error: failed to register DSP DAI driver %d\n", ret); |
| goto fw_trace_err; |
| } |
| |
| ret = snd_sof_machine_register(sdev, plat_data); |
| if (ret < 0) |
| goto fw_trace_err; |
| |
| /* |
| * Some platforms in SOF, ex: BYT, may not have their platform PM |
| * callbacks set. Increment the usage count so as to |
| * prevent the device from entering runtime suspend. |
| */ |
| if (!sof_ops(sdev)->runtime_suspend || !sof_ops(sdev)->runtime_resume) |
| pm_runtime_get_noresume(sdev->dev); |
| |
| if (plat_data->sof_probe_complete) |
| plat_data->sof_probe_complete(sdev->dev); |
| |
| return 0; |
| |
| fw_trace_err: |
| snd_sof_free_trace(sdev); |
| fw_run_err: |
| snd_sof_fw_unload(sdev); |
| fw_load_err: |
| snd_sof_ipc_free(sdev); |
| ipc_err: |
| snd_sof_free_debug(sdev); |
| dbg_err: |
| snd_sof_remove(sdev); |
| |
| /* all resources freed, update state to match */ |
| sdev->fw_state = SOF_FW_BOOT_NOT_STARTED; |
| sdev->first_boot = true; |
| |
| return ret; |
| } |
| |
| static void sof_probe_work(struct work_struct *work) |
| { |
| struct snd_sof_dev *sdev = |
| container_of(work, struct snd_sof_dev, probe_work); |
| int ret; |
| |
| ret = sof_probe_continue(sdev); |
| if (ret < 0) { |
| /* errors cannot be propagated, log */ |
| dev_err(sdev->dev, "error: %s failed err: %d\n", __func__, ret); |
| } |
| } |
| |
| int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data) |
| { |
| struct snd_sof_dev *sdev; |
| |
| sdev = devm_kzalloc(dev, sizeof(*sdev), GFP_KERNEL); |
| if (!sdev) |
| return -ENOMEM; |
| |
| /* initialize sof device */ |
| sdev->dev = dev; |
| |
| /* initialize default DSP power state */ |
| sdev->dsp_power_state.state = SOF_DSP_PM_D0; |
| |
| sdev->pdata = plat_data; |
| sdev->first_boot = true; |
| sdev->fw_state = SOF_FW_BOOT_NOT_STARTED; |
| #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES) |
| sdev->extractor_stream_tag = SOF_PROBE_INVALID_NODE_ID; |
| #endif |
| dev_set_drvdata(dev, sdev); |
| |
| /* check all mandatory ops */ |
| if (!sof_ops(sdev) || !sof_ops(sdev)->probe || !sof_ops(sdev)->run || |
| !sof_ops(sdev)->block_read || !sof_ops(sdev)->block_write || |
| !sof_ops(sdev)->send_msg || !sof_ops(sdev)->load_firmware || |
| !sof_ops(sdev)->ipc_msg_data || !sof_ops(sdev)->ipc_pcm_params || |
| !sof_ops(sdev)->fw_ready) |
| return -EINVAL; |
| |
| INIT_LIST_HEAD(&sdev->pcm_list); |
| INIT_LIST_HEAD(&sdev->kcontrol_list); |
| INIT_LIST_HEAD(&sdev->widget_list); |
| INIT_LIST_HEAD(&sdev->dai_list); |
| INIT_LIST_HEAD(&sdev->route_list); |
| spin_lock_init(&sdev->ipc_lock); |
| spin_lock_init(&sdev->hw_lock); |
| |
| if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) |
| INIT_WORK(&sdev->probe_work, sof_probe_work); |
| |
| /* set default timeouts if none provided */ |
| if (plat_data->desc->ipc_timeout == 0) |
| sdev->ipc_timeout = TIMEOUT_DEFAULT_IPC_MS; |
| else |
| sdev->ipc_timeout = plat_data->desc->ipc_timeout; |
| if (plat_data->desc->boot_timeout == 0) |
| sdev->boot_timeout = TIMEOUT_DEFAULT_BOOT_MS; |
| else |
| sdev->boot_timeout = plat_data->desc->boot_timeout; |
| |
| if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) { |
| schedule_work(&sdev->probe_work); |
| return 0; |
| } |
| |
| return sof_probe_continue(sdev); |
| } |
| EXPORT_SYMBOL(snd_sof_device_probe); |
| |
| int snd_sof_device_remove(struct device *dev) |
| { |
| struct snd_sof_dev *sdev = dev_get_drvdata(dev); |
| struct snd_sof_pdata *pdata = sdev->pdata; |
| |
| if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) |
| cancel_work_sync(&sdev->probe_work); |
| |
| if (sdev->fw_state > SOF_FW_BOOT_NOT_STARTED) { |
| snd_sof_fw_unload(sdev); |
| snd_sof_ipc_free(sdev); |
| snd_sof_free_debug(sdev); |
| snd_sof_free_trace(sdev); |
| } |
| |
| /* |
| * Unregister machine driver. This will unbind the snd_card which |
| * will remove the component driver and unload the topology |
| * before freeing the snd_card. |
| */ |
| snd_sof_machine_unregister(sdev, pdata); |
| |
| /* |
| * Unregistering the machine driver results in unloading the topology. |
| * Some widgets, ex: scheduler, attempt to power down the core they are |
| * scheduled on, when they are unloaded. Therefore, the DSP must be |
| * removed only after the topology has been unloaded. |
| */ |
| if (sdev->fw_state > SOF_FW_BOOT_NOT_STARTED) |
| snd_sof_remove(sdev); |
| |
| /* release firmware */ |
| release_firmware(pdata->fw); |
| pdata->fw = NULL; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(snd_sof_device_remove); |
| |
| MODULE_AUTHOR("Liam Girdwood"); |
| MODULE_DESCRIPTION("Sound Open Firmware (SOF) Core"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_ALIAS("platform:sof-audio"); |