| /* |
| * Copyright (c) 2015, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "mdp5_kms.h" |
| |
| #include "drm_crtc.h" |
| #include "drm_crtc_helper.h" |
| |
| static struct mdp5_kms *get_kms(struct drm_encoder *encoder) |
| { |
| struct msm_drm_private *priv = encoder->dev->dev_private; |
| return to_mdp5_kms(to_mdp_kms(priv->kms)); |
| } |
| |
| #ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING |
| #include <mach/board.h> |
| #include <linux/msm-bus.h> |
| #include <linux/msm-bus-board.h> |
| |
| static void bs_set(struct mdp5_encoder *mdp5_cmd_enc, int idx) |
| { |
| if (mdp5_cmd_enc->bsc) { |
| DBG("set bus scaling: %d", idx); |
| /* HACK: scaling down, and then immediately back up |
| * seems to leave things broken (underflow).. so |
| * never disable: |
| */ |
| idx = 1; |
| msm_bus_scale_client_update_request(mdp5_cmd_enc->bsc, idx); |
| } |
| } |
| #else |
| static void bs_set(struct mdp5_encoder *mdp5_cmd_enc, int idx) {} |
| #endif |
| |
| #define VSYNC_CLK_RATE 19200000 |
| static int pingpong_tearcheck_setup(struct drm_encoder *encoder, |
| struct drm_display_mode *mode) |
| { |
| struct mdp5_kms *mdp5_kms = get_kms(encoder); |
| struct device *dev = encoder->dev->dev; |
| u32 total_lines_x100, vclks_line, cfg; |
| long vsync_clk_speed; |
| int pp_id = GET_PING_PONG_ID(mdp5_crtc_get_lm(encoder->crtc)); |
| |
| if (IS_ERR_OR_NULL(mdp5_kms->vsync_clk)) { |
| dev_err(dev, "vsync_clk is not initialized\n"); |
| return -EINVAL; |
| } |
| |
| total_lines_x100 = mode->vtotal * mode->vrefresh; |
| if (!total_lines_x100) { |
| dev_err(dev, "%s: vtotal(%d) or vrefresh(%d) is 0\n", |
| __func__, mode->vtotal, mode->vrefresh); |
| return -EINVAL; |
| } |
| |
| vsync_clk_speed = clk_round_rate(mdp5_kms->vsync_clk, VSYNC_CLK_RATE); |
| if (vsync_clk_speed <= 0) { |
| dev_err(dev, "vsync_clk round rate failed %ld\n", |
| vsync_clk_speed); |
| return -EINVAL; |
| } |
| vclks_line = vsync_clk_speed * 100 / total_lines_x100; |
| |
| cfg = MDP5_PP_SYNC_CONFIG_VSYNC_COUNTER_EN |
| | MDP5_PP_SYNC_CONFIG_VSYNC_IN_EN; |
| cfg |= MDP5_PP_SYNC_CONFIG_VSYNC_COUNT(vclks_line); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PP_SYNC_CONFIG_VSYNC(pp_id), cfg); |
| mdp5_write(mdp5_kms, |
| REG_MDP5_PP_SYNC_CONFIG_HEIGHT(pp_id), 0xfff0); |
| mdp5_write(mdp5_kms, |
| REG_MDP5_PP_VSYNC_INIT_VAL(pp_id), mode->vdisplay); |
| mdp5_write(mdp5_kms, REG_MDP5_PP_RD_PTR_IRQ(pp_id), mode->vdisplay + 1); |
| mdp5_write(mdp5_kms, REG_MDP5_PP_START_POS(pp_id), mode->vdisplay); |
| mdp5_write(mdp5_kms, REG_MDP5_PP_SYNC_THRESH(pp_id), |
| MDP5_PP_SYNC_THRESH_START(4) | |
| MDP5_PP_SYNC_THRESH_CONTINUE(4)); |
| |
| return 0; |
| } |
| |
| static int pingpong_tearcheck_enable(struct drm_encoder *encoder) |
| { |
| struct mdp5_kms *mdp5_kms = get_kms(encoder); |
| int pp_id = GET_PING_PONG_ID(mdp5_crtc_get_lm(encoder->crtc)); |
| int ret; |
| |
| ret = clk_set_rate(mdp5_kms->vsync_clk, |
| clk_round_rate(mdp5_kms->vsync_clk, VSYNC_CLK_RATE)); |
| if (ret) { |
| dev_err(encoder->dev->dev, |
| "vsync_clk clk_set_rate failed, %d\n", ret); |
| return ret; |
| } |
| ret = clk_prepare_enable(mdp5_kms->vsync_clk); |
| if (ret) { |
| dev_err(encoder->dev->dev, |
| "vsync_clk clk_prepare_enable failed, %d\n", ret); |
| return ret; |
| } |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PP_TEAR_CHECK_EN(pp_id), 1); |
| |
| return 0; |
| } |
| |
| static void pingpong_tearcheck_disable(struct drm_encoder *encoder) |
| { |
| struct mdp5_kms *mdp5_kms = get_kms(encoder); |
| int pp_id = GET_PING_PONG_ID(mdp5_crtc_get_lm(encoder->crtc)); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PP_TEAR_CHECK_EN(pp_id), 0); |
| clk_disable_unprepare(mdp5_kms->vsync_clk); |
| } |
| |
| void mdp5_cmd_encoder_mode_set(struct drm_encoder *encoder, |
| struct drm_display_mode *mode, |
| struct drm_display_mode *adjusted_mode) |
| { |
| struct mdp5_encoder *mdp5_cmd_enc = to_mdp5_encoder(encoder); |
| |
| mode = adjusted_mode; |
| |
| DBG("set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", |
| mode->base.id, mode->name, |
| mode->vrefresh, mode->clock, |
| mode->hdisplay, mode->hsync_start, |
| mode->hsync_end, mode->htotal, |
| mode->vdisplay, mode->vsync_start, |
| mode->vsync_end, mode->vtotal, |
| mode->type, mode->flags); |
| pingpong_tearcheck_setup(encoder, mode); |
| mdp5_crtc_set_pipeline(encoder->crtc, &mdp5_cmd_enc->intf, |
| mdp5_cmd_enc->ctl); |
| } |
| |
| void mdp5_cmd_encoder_disable(struct drm_encoder *encoder) |
| { |
| struct mdp5_encoder *mdp5_cmd_enc = to_mdp5_encoder(encoder); |
| struct mdp5_ctl *ctl = mdp5_cmd_enc->ctl; |
| struct mdp5_interface *intf = &mdp5_cmd_enc->intf; |
| |
| if (WARN_ON(!mdp5_cmd_enc->enabled)) |
| return; |
| |
| pingpong_tearcheck_disable(encoder); |
| |
| mdp5_ctl_set_encoder_state(ctl, false); |
| mdp5_ctl_commit(ctl, mdp_ctl_flush_mask_encoder(intf)); |
| |
| bs_set(mdp5_cmd_enc, 0); |
| |
| mdp5_cmd_enc->enabled = false; |
| } |
| |
| void mdp5_cmd_encoder_enable(struct drm_encoder *encoder) |
| { |
| struct mdp5_encoder *mdp5_cmd_enc = to_mdp5_encoder(encoder); |
| struct mdp5_ctl *ctl = mdp5_cmd_enc->ctl; |
| struct mdp5_interface *intf = &mdp5_cmd_enc->intf; |
| |
| if (WARN_ON(mdp5_cmd_enc->enabled)) |
| return; |
| |
| bs_set(mdp5_cmd_enc, 1); |
| if (pingpong_tearcheck_enable(encoder)) |
| return; |
| |
| mdp5_ctl_commit(ctl, mdp_ctl_flush_mask_encoder(intf)); |
| |
| mdp5_ctl_set_encoder_state(ctl, true); |
| |
| mdp5_cmd_enc->enabled = true; |
| } |
| |
| int mdp5_cmd_encoder_set_split_display(struct drm_encoder *encoder, |
| struct drm_encoder *slave_encoder) |
| { |
| struct mdp5_encoder *mdp5_cmd_enc = to_mdp5_encoder(encoder); |
| struct mdp5_kms *mdp5_kms; |
| int intf_num; |
| u32 data = 0; |
| |
| if (!encoder || !slave_encoder) |
| return -EINVAL; |
| |
| mdp5_kms = get_kms(encoder); |
| intf_num = mdp5_cmd_enc->intf.num; |
| |
| /* Switch slave encoder's trigger MUX, to use the master's |
| * start signal for the slave encoder |
| */ |
| if (intf_num == 1) |
| data |= MDP5_SPLIT_DPL_UPPER_INTF2_SW_TRG_MUX; |
| else if (intf_num == 2) |
| data |= MDP5_SPLIT_DPL_UPPER_INTF1_SW_TRG_MUX; |
| else |
| return -EINVAL; |
| |
| /* Smart Panel, Sync mode */ |
| data |= MDP5_SPLIT_DPL_UPPER_SMART_PANEL; |
| |
| /* Make sure clocks are on when connectors calling this function. */ |
| mdp5_enable(mdp5_kms); |
| mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_UPPER, data); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_LOWER, |
| MDP5_SPLIT_DPL_LOWER_SMART_PANEL); |
| mdp5_write(mdp5_kms, REG_MDP5_SPLIT_DPL_EN, 1); |
| mdp5_disable(mdp5_kms); |
| |
| return 0; |
| } |