| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * HiSilicon Ltd. Hi3620 SoC |
| * |
| * Copyright (C) 2012-2013 HiSilicon Ltd. |
| * Copyright (C) 2012-2013 Linaro Ltd. |
| * |
| * Author: Haojian Zhuang <haojian.zhuang@linaro.org> |
| */ |
| |
| #include <dt-bindings/clock/hi3620-clock.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| serial3 = &uart3; |
| serial4 = &uart4; |
| }; |
| |
| pclk: clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <26000000>; |
| clock-output-names = "apb_pclk"; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| enable-method = "hisilicon,hi3620-smp"; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0x0>; |
| next-level-cache = <&L2>; |
| }; |
| |
| cpu@1 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <1>; |
| next-level-cache = <&L2>; |
| }; |
| |
| cpu@2 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <2>; |
| next-level-cache = <&L2>; |
| }; |
| |
| cpu@3 { |
| compatible = "arm,cortex-a9"; |
| device_type = "cpu"; |
| reg = <3>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| amba-bus { |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges = <0 0xfc000000 0x2000000>; |
| |
| L2: cache-controller { |
| compatible = "arm,pl310-cache"; |
| reg = <0x100000 0x100000>; |
| interrupts = <0 15 4>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| gic: interrupt-controller@1000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| /* gic dist base, gic cpu base */ |
| reg = <0x1000 0x1000>, <0x100 0x100>; |
| }; |
| |
| sysctrl: system-controller@802000 { |
| compatible = "hisilicon,sysctrl", "syscon"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x802000 0x1000>; |
| reg = <0x802000 0x1000>; |
| |
| smp-offset = <0x31c>; |
| resume-offset = <0x308>; |
| reboot-offset = <0x4>; |
| |
| clock: clock@0 { |
| compatible = "hisilicon,hi3620-clock"; |
| reg = <0 0x10000>; |
| #clock-cells = <1>; |
| }; |
| }; |
| |
| dual_timer0: dual_timer@800000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x800000 0x1000>; |
| /* timer00 & timer01 */ |
| interrupts = <0 0 4>, <0 1 4>; |
| clocks = <&clock HI3620_TIMER0_MUX>, |
| <&clock HI3620_TIMER1_MUX>, |
| <&clock HI3620_TIMER0_MUX>; |
| clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| dual_timer1: dual_timer@801000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x801000 0x1000>; |
| /* timer10 & timer11 */ |
| interrupts = <0 2 4>, <0 3 4>; |
| clocks = <&clock HI3620_TIMER2_MUX>, |
| <&clock HI3620_TIMER3_MUX>, |
| <&clock HI3620_TIMER2_MUX>; |
| clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| dual_timer2: dual_timer@a01000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0xa01000 0x1000>; |
| /* timer20 & timer21 */ |
| interrupts = <0 4 4>, <0 5 4>; |
| clocks = <&clock HI3620_TIMER4_MUX>, |
| <&clock HI3620_TIMER5_MUX>, |
| <&clock HI3620_TIMER4_MUX>; |
| clock-names = "timer0lck", "timer1clk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| dual_timer3: dual_timer@a02000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0xa02000 0x1000>; |
| /* timer30 & timer31 */ |
| interrupts = <0 6 4>, <0 7 4>; |
| clocks = <&clock HI3620_TIMER6_MUX>, |
| <&clock HI3620_TIMER7_MUX>, |
| <&clock HI3620_TIMER6_MUX>; |
| clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| dual_timer4: dual_timer@a03000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0xa03000 0x1000>; |
| /* timer40 & timer41 */ |
| interrupts = <0 96 4>, <0 97 4>; |
| clocks = <&clock HI3620_TIMER8_MUX>, |
| <&clock HI3620_TIMER9_MUX>, |
| <&clock HI3620_TIMER8_MUX>; |
| clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| timer5: timer@600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0x600 0x20>; |
| interrupts = <1 13 0xf01>; |
| }; |
| |
| uart0: serial@b00000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0xb00000 0x1000>; |
| interrupts = <0 20 4>; |
| clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>; |
| clock-names = "uartclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@b01000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0xb01000 0x1000>; |
| interrupts = <0 21 4>; |
| clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>; |
| clock-names = "uartclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@b02000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0xb02000 0x1000>; |
| interrupts = <0 22 4>; |
| clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>; |
| clock-names = "uartclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@b03000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0xb03000 0x1000>; |
| interrupts = <0 23 4>; |
| clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>; |
| clock-names = "uartclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@b04000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0xb04000 0x1000>; |
| interrupts = <0 24 4>; |
| clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>; |
| clock-names = "uartclk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@806000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x806000 0x1000>; |
| interrupts = <0 64 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1 |
| &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK0>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio1: gpio@807000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x807000 0x1000>; |
| interrupts = <0 65 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1 |
| &pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1 |
| &pmx0 6 5 1 &pmx0 7 6 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK1>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio2: gpio@808000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x808000 0x1000>; |
| interrupts = <0 66 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1 |
| &pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1 |
| &pmx0 6 3 1 &pmx0 7 3 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio3: gpio@809000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x809000 0x1000>; |
| interrupts = <0 67 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1 |
| &pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1 |
| &pmx0 6 11 1 &pmx0 7 11 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK3>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio4: gpio@80a000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x80a000 0x1000>; |
| interrupts = <0 68 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1 |
| &pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1 |
| &pmx0 6 13 1 &pmx0 7 13 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK4>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio5: gpio@80b000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x80b000 0x1000>; |
| interrupts = <0 69 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1 |
| &pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1 |
| &pmx0 6 16 1 &pmx0 7 16 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK5>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio6: gpio@80c000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x80c000 0x1000>; |
| interrupts = <0 70 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1 |
| &pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1 |
| &pmx0 6 18 1 &pmx0 7 19 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK6>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio7: gpio@80d000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x80d000 0x1000>; |
| interrupts = <0 71 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1 |
| &pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1 |
| &pmx0 6 25 1 &pmx0 7 26 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK7>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio8: gpio@80e000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x80e000 0x1000>; |
| interrupts = <0 72 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1 |
| &pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1 |
| &pmx0 6 33 1 &pmx0 7 34 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK8>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio9: gpio@80f000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x80f000 0x1000>; |
| interrupts = <0 73 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1 |
| &pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1 |
| &pmx0 6 41 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK9>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio10: gpio@810000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x810000 0x1000>; |
| interrupts = <0 74 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1 |
| &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK10>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio11: gpio@811000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x811000 0x1000>; |
| interrupts = <0 75 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1 |
| &pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1 |
| &pmx0 6 49 1 &pmx0 7 49 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK11>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio12: gpio@812000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x812000 0x1000>; |
| interrupts = <0 76 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1 |
| &pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1 |
| &pmx0 6 51 1 &pmx0 7 52 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK12>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio13: gpio@813000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x813000 0x1000>; |
| interrupts = <0 77 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1 |
| &pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1 |
| &pmx0 6 55 1 &pmx0 7 56 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK13>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio14: gpio@814000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x814000 0x1000>; |
| interrupts = <0 78 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1 |
| &pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1 |
| &pmx0 6 60 1 &pmx0 7 61 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK14>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio15: gpio@815000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x815000 0x1000>; |
| interrupts = <0 79 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1 |
| &pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1 |
| &pmx0 6 64 1 &pmx0 7 65 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK15>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio16: gpio@816000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x816000 0x1000>; |
| interrupts = <0 80 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1 |
| &pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1 |
| &pmx0 6 72 1 &pmx0 7 73 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK16>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio17: gpio@817000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x817000 0x1000>; |
| interrupts = <0 81 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1 |
| &pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1 |
| &pmx0 6 80 1 &pmx0 7 81 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK17>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio18: gpio@818000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x818000 0x1000>; |
| interrupts = <0 82 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1 |
| &pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1 |
| &pmx0 6 86 1 &pmx0 7 87 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK18>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio19: gpio@819000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x819000 0x1000>; |
| interrupts = <0 83 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1 |
| &pmx0 3 88 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK19>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio20: gpio@81a000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x81a000 0x1000>; |
| interrupts = <0 84 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1 |
| &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK20>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| gpio21: gpio@81b000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x81b000 0x1000>; |
| interrupts = <0 85 0x4>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&clock HI3620_GPIOCLK21>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| pmx0: pinmux@803000 { |
| compatible = "pinctrl-single"; |
| reg = <0x803000 0x188>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #pinctrl-cells = <1>; |
| #gpio-range-cells = <3>; |
| |
| pinctrl-single,register-width = <32>; |
| pinctrl-single,function-mask = <7>; |
| /* pin base, nr pins & gpio function */ |
| pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1 |
| &range 12 1 0 &range 13 29 1 |
| &range 43 1 0 &range 44 49 1 |
| &range 94 1 1 &range 96 2 1>; |
| |
| range: gpio-range { |
| #pinctrl-single,gpio-range-cells = <3>; |
| }; |
| }; |
| |
| pmx1: pinmux@803800 { |
| compatible = "pinconf-single"; |
| reg = <0x803800 0x2dc>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| #pinctrl-cells = <1>; |
| |
| pinctrl-single,register-width = <32>; |
| }; |
| }; |
| }; |
