Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
USB: musb: MAINTAINERS: Fix my mail address
USB: serial/mos*: prevent reading uninitialized stack memory
USB: otg: twl4030: fix phy initialization(v1)
USB: EHCI: Disable langwell/penwell LPM capability
usb: musb_debugfs: don't use the struct file private_data field with seq_files
diff --git a/MAINTAINERS b/MAINTAINERS
index 411b0d0..50b8148 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3942,7 +3942,7 @@
F: include/linux/isicom.h
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M: Felipe Balbi <felipe.balbi@nokia.com>
+M: Felipe Balbi <balbi@ti.com>
L: linux-usb@vger.kernel.org
T: git git://gitorious.org/usb/usb.git
S: Maintained
@@ -4240,7 +4240,7 @@
F: drivers/char/hw_random/omap-rng.c
OMAP USB SUPPORT
-M: Felipe Balbi <felipe.balbi@nokia.com>
+M: Felipe Balbi <balbi@ti.com>
M: David Brownell <dbrownell@users.sourceforge.net>
L: linux-usb@vger.kernel.org
L: linux-omap@vger.kernel.org
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 58b72d7..a1e8d27 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -119,6 +119,11 @@
ehci->broken_periodic = 1;
ehci_info(ehci, "using broken periodic workaround\n");
}
+ if (pdev->device == 0x0806 || pdev->device == 0x0811
+ || pdev->device == 0x0829) {
+ ehci_info(ehci, "disable lpm for langwell/penwell\n");
+ ehci->has_lpm = 0;
+ }
break;
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index c79a5e3..9e8639d 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -195,15 +195,14 @@
static int musb_test_mode_open(struct inode *inode, struct file *file)
{
- file->private_data = inode->i_private;
-
return single_open(file, musb_test_mode_show, inode->i_private);
}
static ssize_t musb_test_mode_write(struct file *file,
const char __user *ubuf, size_t count, loff_t *ppos)
{
- struct musb *musb = file->private_data;
+ struct seq_file *s = file->private_data;
+ struct musb *musb = s->private;
u8 test = 0;
char buf[18];
diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c
index 05aaac1..0bc9769 100644
--- a/drivers/usb/otg/twl4030-usb.c
+++ b/drivers/usb/otg/twl4030-usb.c
@@ -347,11 +347,20 @@
}
}
+static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
+{
+ u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+
+ if (on)
+ pwr &= ~PHY_PWR_PHYPWD;
+ else
+ pwr |= PHY_PWR_PHYPWD;
+
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+}
+
static void twl4030_phy_power(struct twl4030_usb *twl, int on)
{
- u8 pwr;
-
- pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
if (on) {
regulator_enable(twl->usb3v1);
regulator_enable(twl->usb1v8);
@@ -365,15 +374,13 @@
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0,
VUSB_DEDICATED2);
regulator_enable(twl->usb1v5);
- pwr &= ~PHY_PWR_PHYPWD;
- WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+ __twl4030_phy_power(twl, 1);
twl4030_usb_write(twl, PHY_CLK_CTRL,
twl4030_usb_read(twl, PHY_CLK_CTRL) |
(PHY_CLK_CTRL_CLOCKGATING_EN |
PHY_CLK_CTRL_CLK32K_EN));
- } else {
- pwr |= PHY_PWR_PHYPWD;
- WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+ } else {
+ __twl4030_phy_power(twl, 0);
regulator_disable(twl->usb1v5);
regulator_disable(twl->usb1v8);
regulator_disable(twl->usb3v1);
@@ -387,19 +394,25 @@
twl4030_phy_power(twl, 0);
twl->asleep = 1;
+ dev_dbg(twl->dev, "%s\n", __func__);
+}
+
+static void __twl4030_phy_resume(struct twl4030_usb *twl)
+{
+ twl4030_phy_power(twl, 1);
+ twl4030_i2c_access(twl, 1);
+ twl4030_usb_set_mode(twl, twl->usb_mode);
+ if (twl->usb_mode == T2_USB_MODE_ULPI)
+ twl4030_i2c_access(twl, 0);
}
static void twl4030_phy_resume(struct twl4030_usb *twl)
{
if (!twl->asleep)
return;
-
- twl4030_phy_power(twl, 1);
- twl4030_i2c_access(twl, 1);
- twl4030_usb_set_mode(twl, twl->usb_mode);
- if (twl->usb_mode == T2_USB_MODE_ULPI)
- twl4030_i2c_access(twl, 0);
+ __twl4030_phy_resume(twl);
twl->asleep = 0;
+ dev_dbg(twl->dev, "%s\n", __func__);
}
static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
@@ -408,8 +421,8 @@
twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY);
twl_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0x0C, PROTECT_KEY);
- /* put VUSB3V1 LDO in active state */
- twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+ /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
+ /*twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
/* input to VUSB3V1 LDO is from VBAT, not VBUS */
twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
@@ -502,6 +515,26 @@
return IRQ_HANDLED;
}
+static void twl4030_usb_phy_init(struct twl4030_usb *twl)
+{
+ int status;
+
+ status = twl4030_usb_linkstat(twl);
+ if (status >= 0) {
+ if (status == USB_EVENT_NONE) {
+ __twl4030_phy_power(twl, 0);
+ twl->asleep = 1;
+ } else {
+ __twl4030_phy_resume(twl);
+ twl->asleep = 0;
+ }
+
+ blocking_notifier_call_chain(&twl->otg.notifier, status,
+ twl->otg.gadget);
+ }
+ sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+}
+
static int twl4030_set_suspend(struct otg_transceiver *x, int suspend)
{
struct twl4030_usb *twl = xceiv_to_twl(x);
@@ -550,7 +583,6 @@
struct twl4030_usb_data *pdata = pdev->dev.platform_data;
struct twl4030_usb *twl;
int status, err;
- u8 pwr;
if (!pdata) {
dev_dbg(&pdev->dev, "platform_data not available\n");
@@ -569,10 +601,7 @@
twl->otg.set_peripheral = twl4030_set_peripheral;
twl->otg.set_suspend = twl4030_set_suspend;
twl->usb_mode = pdata->usb_mode;
-
- pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
-
- twl->asleep = (pwr & PHY_PWR_PHYPWD);
+ twl->asleep = 1;
/* init spinlock for workqueue */
spin_lock_init(&twl->lock);
@@ -610,15 +639,10 @@
return status;
}
- /* The IRQ handler just handles changes from the previous states
- * of the ID and VBUS pins ... in probe() we must initialize that
- * previous state. The easy way: fake an IRQ.
- *
- * REVISIT: a real IRQ might have happened already, if PREEMPT is
- * enabled. Else the IRQ may not yet be configured or enabled,
- * because of scheduling delays.
+ /* Power down phy or make it work according to
+ * current link state.
*/
- twl4030_usb_irq(twl->irq, twl);
+ twl4030_usb_phy_init(twl);
dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
return 0;
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 30922a7..aa66581 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -2024,6 +2024,9 @@
case TIOCGICOUNT:
cnow = mos7720_port->icount;
+
+ memset(&icount, 0, sizeof(struct serial_icounter_struct));
+
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 1c9b6e9..1a42bc2 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2285,6 +2285,9 @@
case TIOCGICOUNT:
cnow = mos7840_port->icount;
smp_rmb();
+
+ memset(&icount, 0, sizeof(struct serial_icounter_struct));
+
icount.cts = cnow.cts;
icount.dsr = cnow.dsr;
icount.rng = cnow.rng;
