| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * sama5d2.dtsi - Device Tree Include file for SAMA5D2 family SoC |
| * |
| * Copyright (C) 2015 Atmel, |
| * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> |
| */ |
| |
| #include <dt-bindings/dma/at91.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/clock/at91.h> |
| #include <dt-bindings/iio/adc/at91-sama5d2_adc.h> |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| model = "Atmel SAMA5D2 family SoC"; |
| compatible = "atmel,sama5d2"; |
| interrupt-parent = <&aic>; |
| |
| aliases { |
| serial0 = &uart1; |
| serial1 = &uart3; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a5"; |
| reg = <0>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a5-pmu"; |
| interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>; |
| }; |
| |
| etb { |
| compatible = "arm,coresight-etb10", "arm,primecell"; |
| reg = <0x740000 0x1000>; |
| |
| clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; |
| clock-names = "apb_pclk"; |
| |
| in-ports { |
| port { |
| etb_in: endpoint { |
| remote-endpoint = <&etm_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm { |
| compatible = "arm,coresight-etm3x", "arm,primecell"; |
| reg = <0x73C000 0x1000>; |
| |
| clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; |
| clock-names = "apb_pclk"; |
| |
| out-ports { |
| port { |
| etm_out: endpoint { |
| remote-endpoint = <&etb_in>; |
| }; |
| }; |
| }; |
| }; |
| |
| memory@20000000 { |
| device_type = "memory"; |
| reg = <0x20000000 0x20000000>; |
| }; |
| |
| clocks { |
| slow_xtal: slow_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| |
| main_xtal: main_xtal { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <0>; |
| }; |
| }; |
| |
| ns_sram: sram@200000 { |
| compatible = "mmio-sram"; |
| reg = <0x00200000 0x20000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00200000 0x20000>; |
| }; |
| |
| ahb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| nfc_sram: sram@100000 { |
| compatible = "mmio-sram"; |
| no-memory-wc; |
| reg = <0x00100000 0x2400>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x00100000 0x2400>; |
| |
| }; |
| |
| usb0: gadget@300000 { |
| compatible = "atmel,sama5d3-udc"; |
| reg = <0x00300000 0x100000 |
| 0xfc02c000 0x400>; |
| interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| clock-names = "pclk", "hclk"; |
| status = "disabled"; |
| }; |
| |
| usb1: ohci@400000 { |
| compatible = "atmel,at91rm9200-ohci", "usb-ohci"; |
| reg = <0x00400000 0x100000>; |
| interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>; |
| clock-names = "ohci_clk", "hclk", "uhpck"; |
| status = "disabled"; |
| }; |
| |
| usb2: ehci@500000 { |
| compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; |
| reg = <0x00500000 0x100000>; |
| interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; |
| clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>; |
| clock-names = "usb_clk", "ehci_clk"; |
| status = "disabled"; |
| }; |
| |
| L2: cache-controller@a00000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x00a00000 0x1000>; |
| interrupts = <63 IRQ_TYPE_LEVEL_HIGH 4>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| ebi: ebi@10000000 { |
| compatible = "atmel,sama5d3-ebi"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| atmel,smc = <&hsmc>; |
| reg = <0x10000000 0x10000000 |
| 0x60000000 0x30000000>; |
| ranges = <0x0 0x0 0x10000000 0x10000000 |
| 0x1 0x0 0x60000000 0x10000000 |
| 0x2 0x0 0x70000000 0x10000000 |
| 0x3 0x0 0x80000000 0x10000000>; |
| clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; |
| status = "disabled"; |
| |
| nand_controller: nand-controller { |
| compatible = "atmel,sama5d3-nand-controller"; |
| atmel,nfc-sram = <&nfc_sram>; |
| atmel,nfc-io = <&nfc_io>; |
| ecc-engine = <&pmecc>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges; |
| status = "disabled"; |
| }; |
| }; |
| |
| sdmmc0: sdio-host@a0000000 { |
| compatible = "atmel,sama5d2-sdhci"; |
| reg = <0xa0000000 0x300>; |
| interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>; |
| clock-names = "hclock", "multclk", "baseclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 31>; |
| assigned-clock-rates = <480000000>; |
| status = "disabled"; |
| }; |
| |
| sdmmc1: sdio-host@b0000000 { |
| compatible = "atmel,sama5d2-sdhci"; |
| reg = <0xb0000000 0x300>; |
| interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>; |
| clock-names = "hclock", "multclk", "baseclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 32>; |
| assigned-clock-rates = <480000000>; |
| status = "disabled"; |
| }; |
| |
| nfc_io: nfc-io@c0000000 { |
| compatible = "atmel,sama5d3-nfc-io", "syscon"; |
| reg = <0xc0000000 0x8000000>; |
| }; |
| |
| apb { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| hlcdc: hlcdc@f0000000 { |
| compatible = "atmel,sama5d2-hlcdc"; |
| reg = <0xf0000000 0x2000>; |
| interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>; |
| clock-names = "periph_clk","sys_clk", "slow_clk"; |
| status = "disabled"; |
| |
| hlcdc-display-controller { |
| compatible = "atmel,hlcdc-display-controller"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| }; |
| }; |
| |
| hlcdc_pwm: hlcdc-pwm { |
| compatible = "atmel,hlcdc-pwm"; |
| #pwm-cells = <3>; |
| }; |
| }; |
| |
| isc: isc@f0008000 { |
| compatible = "atmel,sama5d2-isc"; |
| reg = <0xf0008000 0x4000>; |
| interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>; |
| clock-names = "hclock", "iscck", "gck"; |
| #clock-cells = <0>; |
| clock-output-names = "isc-mck"; |
| status = "disabled"; |
| }; |
| |
| ramc0: ramc@f000c000 { |
| compatible = "atmel,sama5d3-ddramc"; |
| reg = <0xf000c000 0x200>; |
| clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>; |
| clock-names = "ddrck", "mpddr"; |
| }; |
| |
| dma0: dma-controller@f0010000 { |
| compatible = "atmel,sama5d4-dma"; |
| reg = <0xf0010000 0x1000>; |
| interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; |
| #dma-cells = <1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; |
| clock-names = "dma_clk"; |
| }; |
| |
| /* Place dma1 here despite its address */ |
| dma1: dma-controller@f0004000 { |
| compatible = "atmel,sama5d4-dma"; |
| reg = <0xf0004000 0x1000>; |
| interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>; |
| #dma-cells = <1>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; |
| clock-names = "dma_clk"; |
| }; |
| |
| pmc: pmc@f0014000 { |
| compatible = "atmel,sama5d2-pmc", "syscon"; |
| reg = <0xf0014000 0x160>; |
| interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; |
| #clock-cells = <2>; |
| clocks = <&clk32k>, <&main_xtal>; |
| clock-names = "slow_clk", "main_xtal"; |
| }; |
| |
| qspi0: spi@f0020000 { |
| compatible = "atmel,sama5d2-qspi"; |
| reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>; |
| reg-names = "qspi_base", "qspi_mmap"; |
| interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 52>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| qspi1: spi@f0024000 { |
| compatible = "atmel,sama5d2-qspi"; |
| reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>; |
| reg-names = "qspi_base", "qspi_mmap"; |
| interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 53>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sha@f0028000 { |
| compatible = "atmel,at91sam9g46-sha"; |
| reg = <0xf0028000 0x100>; |
| interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(30))>; |
| dma-names = "tx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; |
| clock-names = "sha_clk"; |
| status = "okay"; |
| }; |
| |
| aes@f002c000 { |
| compatible = "atmel,at91sam9g46-aes"; |
| reg = <0xf002c000 0x100>; |
| interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(26))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(27))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; |
| clock-names = "aes_clk"; |
| status = "okay"; |
| }; |
| |
| spi0: spi@f8000000 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0xf8000000 0x100>; |
| interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(6))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(7))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 33>; |
| clock-names = "spi_clk"; |
| atmel,fifo-size = <16>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ssc0: ssc@f8004000 { |
| compatible = "atmel,at91sam9g45-ssc"; |
| reg = <0xf8004000 0x4000>; |
| interrupts = <43 IRQ_TYPE_LEVEL_HIGH 4>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(21))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(22))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 43>; |
| clock-names = "pclk"; |
| status = "disabled"; |
| }; |
| |
| macb0: ethernet@f8008000 { |
| compatible = "atmel,sama5d2-gem"; |
| reg = <0xf8008000 0x1000>; |
| interrupts = <5 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */ |
| 66 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */ |
| 67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>; |
| clock-names = "hclk", "pclk"; |
| status = "disabled"; |
| }; |
| |
| tcb0: timer@f800c000 { |
| compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xf800c000 0x100>; |
| interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>, <&clk32k>; |
| clock-names = "t0_clk", "gclk", "slow_clk"; |
| }; |
| |
| tcb1: timer@f8010000 { |
| compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0xf8010000 0x100>; |
| interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_GCK 36>, <&clk32k>; |
| clock-names = "t0_clk", "gclk", "slow_clk"; |
| }; |
| |
| hsmc: hsmc@f8014000 { |
| compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd"; |
| reg = <0xf8014000 0x1000>; |
| interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pmecc: ecc-engine@f8014070 { |
| compatible = "atmel,sama5d2-pmecc"; |
| reg = <0xf8014070 0x490>, |
| <0xf8014500 0x100>; |
| }; |
| }; |
| |
| pdmic: pdmic@f8018000 { |
| compatible = "atmel,sama5d2-pdmic"; |
| reg = <0xf8018000 0x124>; |
| interrupts = <48 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
| | AT91_XDMAC_DT_PERID(50))>; |
| dma-names = "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>; |
| clock-names = "pclk", "gclk"; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@f801c000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf801c000 0x100>; |
| interrupts = <24 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(35))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(36))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@f8020000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf8020000 0x100>; |
| interrupts = <25 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(37))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(38))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 25>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@f8024000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xf8024000 0x100>; |
| interrupts = <26 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(39))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(40))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@f8028000 { |
| compatible = "atmel,sama5d2-i2c"; |
| reg = <0xf8028000 0x100>; |
| interrupts = <29 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(0))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(1))>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@f802c000 { |
| compatible = "atmel,sama5d2-pwm"; |
| reg = <0xf802c000 0x4000>; |
| interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>; |
| #pwm-cells = <3>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 38>; |
| status = "disabled"; |
| }; |
| |
| sfr: sfr@f8030000 { |
| compatible = "atmel,sama5d2-sfr", "syscon"; |
| reg = <0xf8030000 0x98>; |
| }; |
| |
| flx0: flexcom@f8034000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xf8034000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xf8034000 0x800>; |
| status = "disabled"; |
| |
| uart5: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; |
| clock-names = "usart"; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(11))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(12))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <32>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; |
| clock-names = "spi_clk"; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(11))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(12))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@600 { |
| compatible = "atmel,sama5d2-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(11))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(12))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx1: flexcom@f8038000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xf8038000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xf8038000 0x800>; |
| status = "disabled"; |
| |
| uart6: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; |
| clock-names = "usart"; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(13))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(14))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <32>; |
| status = "disabled"; |
| }; |
| |
| spi3: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; |
| clock-names = "spi_clk"; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(13))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(14))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@600 { |
| compatible = "atmel,sama5d2-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 20>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(13))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(14))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| }; |
| |
| securam: sram@f8044000 { |
| compatible = "atmel,sama5d2-securam", "mmio-sram"; |
| reg = <0xf8044000 0x1420>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 51>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| no-memory-wc; |
| ranges = <0 0xf8044000 0x1420>; |
| }; |
| |
| reset_controller: rstc@f8048000 { |
| compatible = "atmel,sama5d3-rstc"; |
| reg = <0xf8048000 0x10>; |
| clocks = <&clk32k>; |
| }; |
| |
| shutdown_controller: shdwc@f8048010 { |
| compatible = "atmel,sama5d2-shdwc"; |
| reg = <0xf8048010 0x10>; |
| clocks = <&clk32k>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| atmel,wakeup-rtc-timer; |
| }; |
| |
| pit: timer@f8048030 { |
| compatible = "atmel,at91sam9260-pit"; |
| reg = <0xf8048030 0x10>; |
| interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>; |
| clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>; |
| }; |
| |
| watchdog: watchdog@f8048040 { |
| compatible = "atmel,sama5d4-wdt"; |
| reg = <0xf8048040 0x10>; |
| interrupts = <4 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&clk32k>; |
| status = "disabled"; |
| }; |
| |
| clk32k: sckc@f8048050 { |
| compatible = "atmel,sama5d4-sckc"; |
| reg = <0xf8048050 0x4>; |
| |
| clocks = <&slow_xtal>; |
| #clock-cells = <0>; |
| }; |
| |
| rtc: rtc@f80480b0 { |
| compatible = "atmel,sama5d2-rtc"; |
| reg = <0xf80480b0 0x30>; |
| interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&clk32k>; |
| }; |
| |
| i2s0: i2s@f8050000 { |
| compatible = "atmel,sama5d2-i2s"; |
| reg = <0xf8050000 0x100>; |
| interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(31))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(32))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>; |
| clock-names = "pclk", "gclk"; |
| assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>; |
| assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>; |
| status = "disabled"; |
| }; |
| |
| can0: can@f8054000 { |
| compatible = "bosch,m_can"; |
| reg = <0xf8054000 0x4000>, <0x210000 0x1c00>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>, |
| <64 IRQ_TYPE_LEVEL_HIGH 7>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>; |
| clock-names = "hclk", "cclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 56>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| assigned-clock-rates = <40000000>; |
| bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@fc000000 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0xfc000000 0x100>; |
| interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(8))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(9))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 34>; |
| clock-names = "spi_clk"; |
| atmel,fifo-size = <16>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@fc008000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xfc008000 0x100>; |
| interrupts = <27 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma1 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(41))>, |
| <&dma1 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(42))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@fc00c000 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0xfc00c000 0x100>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(43))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(44))>; |
| dma-names = "tx", "rx"; |
| interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 28>; |
| clock-names = "usart"; |
| status = "disabled"; |
| }; |
| |
| flx2: flexcom@fc010000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xfc010000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xfc010000 0x800>; |
| status = "disabled"; |
| |
| uart7: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; |
| clock-names = "usart"; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(15))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(16))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <32>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; |
| clock-names = "spi_clk"; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(15))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(16))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@600 { |
| compatible = "atmel,sama5d2-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(15))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(16))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| }; |
| |
| flx3: flexcom@fc014000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xfc014000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xfc014000 0x800>; |
| status = "disabled"; |
| |
| uart8: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; |
| clock-names = "usart"; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(17))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(18))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <32>; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; |
| clock-names = "spi_clk"; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(17))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(18))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@600 { |
| compatible = "atmel,sama5d2-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 22>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(17))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(18))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| |
| }; |
| |
| flx4: flexcom@fc018000 { |
| compatible = "atmel,sama5d2-flexcom"; |
| reg = <0xfc018000 0x200>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0xfc018000 0x800>; |
| status = "disabled"; |
| |
| uart9: serial@200 { |
| compatible = "atmel,at91sam9260-usart"; |
| reg = <0x200 0x200>; |
| interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; |
| clock-names = "usart"; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(19))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(20))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <32>; |
| status = "disabled"; |
| }; |
| |
| spi6: spi@400 { |
| compatible = "atmel,at91rm9200-spi"; |
| reg = <0x400 0x200>; |
| interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; |
| clock-names = "spi_clk"; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(19))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(20))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@600 { |
| compatible = "atmel,sama5d2-i2c"; |
| reg = <0x600 0x200>; |
| interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 23>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(19))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | |
| AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(20))>; |
| dma-names = "tx", "rx"; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| }; |
| |
| trng@fc01c000 { |
| compatible = "atmel,at91sam9g45-trng"; |
| reg = <0xfc01c000 0x100>; |
| interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 47>; |
| }; |
| |
| aic: interrupt-controller@fc020000 { |
| #interrupt-cells = <3>; |
| compatible = "atmel,sama5d2-aic"; |
| interrupt-controller; |
| reg = <0xfc020000 0x200>; |
| atmel,external-irqs = <49>; |
| }; |
| |
| i2c1: i2c@fc028000 { |
| compatible = "atmel,sama5d2-i2c"; |
| reg = <0xfc028000 0x100>; |
| interrupts = <30 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(2))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(3))>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 30>; |
| atmel,fifo-size = <16>; |
| status = "disabled"; |
| }; |
| |
| adc: adc@fc030000 { |
| compatible = "atmel,sama5d2-adc"; |
| reg = <0xfc030000 0x100>; |
| interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 40>; |
| clock-names = "adc_clk"; |
| dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>; |
| dma-names = "rx"; |
| atmel,min-sample-rate-hz = <200000>; |
| atmel,max-sample-rate-hz = <20000000>; |
| atmel,startup-time-ms = <4>; |
| atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; |
| #io-channel-cells = <1>; |
| status = "disabled"; |
| }; |
| |
| resistive_touch: resistive-touch { |
| compatible = "resistive-adc-touch"; |
| io-channels = <&adc AT91_SAMA5D2_ADC_X_CHANNEL>, |
| <&adc AT91_SAMA5D2_ADC_Y_CHANNEL>, |
| <&adc AT91_SAMA5D2_ADC_P_CHANNEL>; |
| io-channel-names = "x", "y", "pressure"; |
| touchscreen-min-pressure = <50000>; |
| status = "disabled"; |
| }; |
| |
| pioA: pinctrl@fc038000 { |
| compatible = "atmel,sama5d2-pinctrl"; |
| reg = <0xfc038000 0x600>; |
| interrupts = <18 IRQ_TYPE_LEVEL_HIGH 7>, |
| <68 IRQ_TYPE_LEVEL_HIGH 7>, |
| <69 IRQ_TYPE_LEVEL_HIGH 7>, |
| <70 IRQ_TYPE_LEVEL_HIGH 7>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 18>; |
| }; |
| |
| pioBU: secumod@fc040000 { |
| compatible = "atmel,sama5d2-secumod", "syscon"; |
| reg = <0xfc040000 0x100>; |
| |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| tdes@fc044000 { |
| compatible = "atmel,at91sam9g46-tdes"; |
| reg = <0xfc044000 0x100>; |
| interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(28))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(29))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; |
| clock-names = "tdes_clk"; |
| status = "okay"; |
| }; |
| |
| classd: classd@fc048000 { |
| compatible = "atmel,sama5d2-classd"; |
| reg = <0xfc048000 0x100>; |
| interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(47))>; |
| dma-names = "tx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>; |
| clock-names = "pclk", "gclk"; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@fc04c000 { |
| compatible = "atmel,sama5d2-i2s"; |
| reg = <0xfc04c000 0x100>; |
| interrupts = <55 IRQ_TYPE_LEVEL_HIGH 7>; |
| dmas = <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(33))>, |
| <&dma0 |
| (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | |
| AT91_XDMAC_DT_PERID(34))>; |
| dma-names = "tx", "rx"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>; |
| clock-names = "pclk", "gclk"; |
| assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>; |
| assigned-parrents = <&pmc PMC_TYPE_GCK 55>; |
| status = "disabled"; |
| }; |
| |
| can1: can@fc050000 { |
| compatible = "bosch,m_can"; |
| reg = <0xfc050000 0x4000>, <0x210000 0x3800>; |
| reg-names = "m_can", "message_ram"; |
| interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>, |
| <65 IRQ_TYPE_LEVEL_HIGH 7>; |
| interrupt-names = "int0", "int1"; |
| clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>; |
| clock-names = "hclk", "cclk"; |
| assigned-clocks = <&pmc PMC_TYPE_GCK 57>; |
| assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>; |
| assigned-clock-rates = <40000000>; |
| bosch,mram-cfg = <0x1c00 0 0 64 0 0 32 32>; |
| status = "disabled"; |
| }; |
| |
| sfrbu: sfr@fc05c000 { |
| compatible = "atmel,sama5d2-sfrbu", "syscon"; |
| reg = <0xfc05c000 0x20>; |
| }; |
| |
| chipid@fc069000 { |
| compatible = "atmel,sama5d2-chipid"; |
| reg = <0xfc069000 0x8>; |
| }; |
| }; |
| }; |
| }; |
