| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * ARM Ltd. Versatile Express |
| * |
| * CoreTile Express A9x4 |
| * Cortex-A9 MPCore (V2P-CA9) |
| * |
| * HBI-0191B |
| */ |
| |
| /dts-v1/; |
| #include "vexpress-v2m.dtsi" |
| |
| / { |
| model = "V2P-CA9"; |
| arm,hbi = <0x191>; |
| arm,vexpress,site = <0xf>; |
| compatible = "arm,vexpress,v2p-ca9", "arm,vexpress"; |
| interrupt-parent = <&gic>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| chosen { }; |
| |
| aliases { |
| serial0 = &v2m_serial0; |
| serial1 = &v2m_serial1; |
| serial2 = &v2m_serial2; |
| serial3 = &v2m_serial3; |
| i2c0 = &v2m_i2c_dvi; |
| i2c1 = &v2m_i2c_pcie; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| A9_0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <0>; |
| next-level-cache = <&L2>; |
| }; |
| |
| A9_1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <1>; |
| next-level-cache = <&L2>; |
| }; |
| |
| A9_2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <2>; |
| next-level-cache = <&L2>; |
| }; |
| |
| A9_3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a9"; |
| reg = <3>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| memory@60000000 { |
| device_type = "memory"; |
| reg = <0x60000000 0x40000000>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| /* Chipselect 3 is physically at 0x4c000000 */ |
| vram: vram@4c000000 { |
| /* 8 MB of designated video RAM */ |
| compatible = "shared-dma-pool"; |
| reg = <0x4c000000 0x00800000>; |
| no-map; |
| }; |
| }; |
| |
| clcd@10020000 { |
| compatible = "arm,pl111", "arm,primecell"; |
| reg = <0x10020000 0x1000>; |
| interrupt-names = "combined"; |
| interrupts = <0 44 4>; |
| clocks = <&oscclk1>, <&oscclk2>; |
| clock-names = "clcdclk", "apb_pclk"; |
| /* 1024x768 16bpp @65MHz */ |
| max-memory-bandwidth = <95000000>; |
| |
| port { |
| clcd_pads_ct: endpoint { |
| remote-endpoint = <&dvi_bridge_in_ct>; |
| arm,pl11x,tft-r0g0b0-pads = <0 8 16>; |
| }; |
| }; |
| }; |
| |
| memory-controller@100e0000 { |
| compatible = "arm,pl341", "arm,primecell"; |
| reg = <0x100e0000 0x1000>; |
| clocks = <&oscclk2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| memory-controller@100e1000 { |
| compatible = "arm,pl354", "arm,primecell"; |
| reg = <0x100e1000 0x1000>; |
| interrupts = <0 45 4>, |
| <0 46 4>; |
| clocks = <&oscclk2>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| timer@100e4000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x100e4000 0x1000>; |
| interrupts = <0 48 4>, |
| <0 49 4>; |
| clocks = <&oscclk2>, <&oscclk2>, <&oscclk2>; |
| clock-names = "timer0clk", "timer1clk", "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| watchdog@100e5000 { |
| compatible = "arm,sp805", "arm,primecell"; |
| reg = <0x100e5000 0x1000>; |
| interrupts = <0 51 4>; |
| clocks = <&oscclk2>, <&oscclk2>; |
| clock-names = "wdog_clk", "apb_pclk"; |
| }; |
| |
| scu@1e000000 { |
| compatible = "arm,cortex-a9-scu"; |
| reg = <0x1e000000 0x58>; |
| }; |
| |
| timer@1e000600 { |
| compatible = "arm,cortex-a9-twd-timer"; |
| reg = <0x1e000600 0x20>; |
| interrupts = <1 13 0xf04>; |
| }; |
| |
| watchdog@1e000620 { |
| compatible = "arm,cortex-a9-twd-wdt"; |
| reg = <0x1e000620 0x20>; |
| interrupts = <1 14 0xf04>; |
| }; |
| |
| gic: interrupt-controller@1e001000 { |
| compatible = "arm,cortex-a9-gic"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x1e001000 0x1000>, |
| <0x1e000100 0x100>; |
| }; |
| |
| L2: cache-controller@1e00a000 { |
| compatible = "arm,pl310-cache"; |
| reg = <0x1e00a000 0x1000>; |
| interrupts = <0 43 4>; |
| cache-unified; |
| cache-level = <2>; |
| arm,data-latency = <1 1 1>; |
| arm,tag-latency = <1 1 1>; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a9-pmu"; |
| interrupts = <0 60 4>, |
| <0 61 4>, |
| <0 62 4>, |
| <0 63 4>; |
| interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>; |
| |
| }; |
| |
| dcc { |
| compatible = "arm,vexpress,config-bus"; |
| arm,vexpress,config-bridge = <&v2m_sysreg>; |
| |
| oscclk0: extsaxiclk { |
| /* ACLK clock to the AXI master port on the test chip */ |
| compatible = "arm,vexpress-osc"; |
| arm,vexpress-sysreg,func = <1 0>; |
| freq-range = <30000000 50000000>; |
| #clock-cells = <0>; |
| clock-output-names = "extsaxiclk"; |
| }; |
| |
| oscclk1: clcdclk { |
| /* Reference clock for the CLCD */ |
| compatible = "arm,vexpress-osc"; |
| arm,vexpress-sysreg,func = <1 1>; |
| freq-range = <10000000 80000000>; |
| #clock-cells = <0>; |
| clock-output-names = "clcdclk"; |
| }; |
| |
| smbclk: oscclk2: tcrefclk { |
| /* Reference clock for the test chip internal PLLs */ |
| compatible = "arm,vexpress-osc"; |
| arm,vexpress-sysreg,func = <1 2>; |
| freq-range = <33000000 100000000>; |
| #clock-cells = <0>; |
| clock-output-names = "tcrefclk"; |
| }; |
| |
| volt-vd10 { |
| /* Test Chip internal logic voltage */ |
| compatible = "arm,vexpress-volt"; |
| arm,vexpress-sysreg,func = <2 0>; |
| regulator-name = "VD10"; |
| regulator-always-on; |
| label = "VD10"; |
| }; |
| |
| volt-vd10-s2 { |
| /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ |
| compatible = "arm,vexpress-volt"; |
| arm,vexpress-sysreg,func = <2 1>; |
| regulator-name = "VD10_S2"; |
| regulator-always-on; |
| label = "VD10_S2"; |
| }; |
| |
| volt-vd10-s3 { |
| /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ |
| compatible = "arm,vexpress-volt"; |
| arm,vexpress-sysreg,func = <2 2>; |
| regulator-name = "VD10_S3"; |
| regulator-always-on; |
| label = "VD10_S3"; |
| }; |
| |
| volt-vcc1v8 { |
| /* DDR2 SDRAM and Test Chip DDR2 I/O supply */ |
| compatible = "arm,vexpress-volt"; |
| arm,vexpress-sysreg,func = <2 3>; |
| regulator-name = "VCC1V8"; |
| regulator-always-on; |
| label = "VCC1V8"; |
| }; |
| |
| volt-ddr2vtt { |
| /* DDR2 SDRAM VTT termination voltage */ |
| compatible = "arm,vexpress-volt"; |
| arm,vexpress-sysreg,func = <2 4>; |
| regulator-name = "DDR2VTT"; |
| regulator-always-on; |
| label = "DDR2VTT"; |
| }; |
| |
| volt-vcc3v3 { |
| /* Local board supply for miscellaneous logic external to the Test Chip */ |
| arm,vexpress-sysreg,func = <2 5>; |
| compatible = "arm,vexpress-volt"; |
| regulator-name = "VCC3V3"; |
| regulator-always-on; |
| label = "VCC3V3"; |
| }; |
| |
| amp-vd10-s2 { |
| /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ |
| compatible = "arm,vexpress-amp"; |
| arm,vexpress-sysreg,func = <3 0>; |
| label = "VD10_S2"; |
| }; |
| |
| amp-vd10-s3 { |
| /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ |
| compatible = "arm,vexpress-amp"; |
| arm,vexpress-sysreg,func = <3 1>; |
| label = "VD10_S3"; |
| }; |
| |
| power-vd10-s2 { |
| /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ |
| compatible = "arm,vexpress-power"; |
| arm,vexpress-sysreg,func = <12 0>; |
| label = "PVD10_S2"; |
| }; |
| |
| power-vd10-s3 { |
| /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ |
| compatible = "arm,vexpress-power"; |
| arm,vexpress-sysreg,func = <12 1>; |
| label = "PVD10_S3"; |
| }; |
| }; |
| |
| smb: bus@40000000 { |
| compatible = "simple-bus"; |
| |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges = <0 0 0x40000000 0x04000000>, |
| <1 0 0x44000000 0x04000000>, |
| <2 0 0x48000000 0x04000000>, |
| <3 0 0x4c000000 0x04000000>, |
| <7 0 0x10000000 0x00020000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 63>; |
| interrupt-map = <0 0 0 &gic 0 0 4>, |
| <0 0 1 &gic 0 1 4>, |
| <0 0 2 &gic 0 2 4>, |
| <0 0 3 &gic 0 3 4>, |
| <0 0 4 &gic 0 4 4>, |
| <0 0 5 &gic 0 5 4>, |
| <0 0 6 &gic 0 6 4>, |
| <0 0 7 &gic 0 7 4>, |
| <0 0 8 &gic 0 8 4>, |
| <0 0 9 &gic 0 9 4>, |
| <0 0 10 &gic 0 10 4>, |
| <0 0 11 &gic 0 11 4>, |
| <0 0 12 &gic 0 12 4>, |
| <0 0 13 &gic 0 13 4>, |
| <0 0 14 &gic 0 14 4>, |
| <0 0 15 &gic 0 15 4>, |
| <0 0 16 &gic 0 16 4>, |
| <0 0 17 &gic 0 17 4>, |
| <0 0 18 &gic 0 18 4>, |
| <0 0 19 &gic 0 19 4>, |
| <0 0 20 &gic 0 20 4>, |
| <0 0 21 &gic 0 21 4>, |
| <0 0 22 &gic 0 22 4>, |
| <0 0 23 &gic 0 23 4>, |
| <0 0 24 &gic 0 24 4>, |
| <0 0 25 &gic 0 25 4>, |
| <0 0 26 &gic 0 26 4>, |
| <0 0 27 &gic 0 27 4>, |
| <0 0 28 &gic 0 28 4>, |
| <0 0 29 &gic 0 29 4>, |
| <0 0 30 &gic 0 30 4>, |
| <0 0 31 &gic 0 31 4>, |
| <0 0 32 &gic 0 32 4>, |
| <0 0 33 &gic 0 33 4>, |
| <0 0 34 &gic 0 34 4>, |
| <0 0 35 &gic 0 35 4>, |
| <0 0 36 &gic 0 36 4>, |
| <0 0 37 &gic 0 37 4>, |
| <0 0 38 &gic 0 38 4>, |
| <0 0 39 &gic 0 39 4>, |
| <0 0 40 &gic 0 40 4>, |
| <0 0 41 &gic 0 41 4>, |
| <0 0 42 &gic 0 42 4>; |
| }; |
| |
| site2: hsb@e0000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0xe0000000 0x20000000>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 3>; |
| interrupt-map = <0 0 &gic 0 36 4>, |
| <0 1 &gic 0 37 4>, |
| <0 2 &gic 0 38 4>, |
| <0 3 &gic 0 39 4>; |
| }; |
| }; |