| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * linux/drivers/char/ttyprintk.c |
| * |
| * Copyright (C) 2010 Samo Pogacnik |
| */ |
| |
| /* |
| * This pseudo device allows user to make printk messages. It is possible |
| * to store "console" messages inline with kernel messages for better analyses |
| * of the boot process, for example. |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/serial.h> |
| #include <linux/tty.h> |
| #include <linux/module.h> |
| #include <linux/spinlock.h> |
| |
| struct ttyprintk_port { |
| struct tty_port port; |
| spinlock_t spinlock; |
| }; |
| |
| static struct ttyprintk_port tpk_port; |
| |
| /* |
| * Our simple preformatting supports transparent output of (time-stamped) |
| * printk messages (also suitable for logging service): |
| * - any cr is replaced by nl |
| * - adds a ttyprintk source tag in front of each line |
| * - too long message is fragmented, with '\'nl between fragments |
| * - TPK_STR_SIZE isn't really the write_room limiting factor, because |
| * it is emptied on the fly during preformatting. |
| */ |
| #define TPK_STR_SIZE 508 /* should be bigger then max expected line length */ |
| #define TPK_MAX_ROOM 4096 /* we could assume 4K for instance */ |
| #define TPK_PREFIX KERN_SOH __stringify(CONFIG_TTY_PRINTK_LEVEL) |
| |
| static int tpk_curr; |
| |
| static char tpk_buffer[TPK_STR_SIZE + 4]; |
| |
| static void tpk_flush(void) |
| { |
| if (tpk_curr > 0) { |
| tpk_buffer[tpk_curr] = '\0'; |
| printk(TPK_PREFIX "[U] %s\n", tpk_buffer); |
| tpk_curr = 0; |
| } |
| } |
| |
| static int tpk_printk(const unsigned char *buf, int count) |
| { |
| int i = tpk_curr; |
| |
| if (buf == NULL) { |
| tpk_flush(); |
| return i; |
| } |
| |
| for (i = 0; i < count; i++) { |
| if (tpk_curr >= TPK_STR_SIZE) { |
| /* end of tmp buffer reached: cut the message in two */ |
| tpk_buffer[tpk_curr++] = '\\'; |
| tpk_flush(); |
| } |
| |
| switch (buf[i]) { |
| case '\r': |
| tpk_flush(); |
| if ((i + 1) < count && buf[i + 1] == '\n') |
| i++; |
| break; |
| case '\n': |
| tpk_flush(); |
| break; |
| default: |
| tpk_buffer[tpk_curr++] = buf[i]; |
| break; |
| } |
| } |
| |
| return count; |
| } |
| |
| /* |
| * TTY operations open function. |
| */ |
| static int tpk_open(struct tty_struct *tty, struct file *filp) |
| { |
| tty->driver_data = &tpk_port; |
| |
| return tty_port_open(&tpk_port.port, tty, filp); |
| } |
| |
| /* |
| * TTY operations close function. |
| */ |
| static void tpk_close(struct tty_struct *tty, struct file *filp) |
| { |
| struct ttyprintk_port *tpkp = tty->driver_data; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&tpkp->spinlock, flags); |
| /* flush tpk_printk buffer */ |
| tpk_printk(NULL, 0); |
| spin_unlock_irqrestore(&tpkp->spinlock, flags); |
| |
| tty_port_close(&tpkp->port, tty, filp); |
| } |
| |
| /* |
| * TTY operations write function. |
| */ |
| static int tpk_write(struct tty_struct *tty, |
| const unsigned char *buf, int count) |
| { |
| struct ttyprintk_port *tpkp = tty->driver_data; |
| unsigned long flags; |
| int ret; |
| |
| |
| /* exclusive use of tpk_printk within this tty */ |
| spin_lock_irqsave(&tpkp->spinlock, flags); |
| ret = tpk_printk(buf, count); |
| spin_unlock_irqrestore(&tpkp->spinlock, flags); |
| |
| return ret; |
| } |
| |
| /* |
| * TTY operations write_room function. |
| */ |
| static int tpk_write_room(struct tty_struct *tty) |
| { |
| return TPK_MAX_ROOM; |
| } |
| |
| /* |
| * TTY operations ioctl function. |
| */ |
| static int tpk_ioctl(struct tty_struct *tty, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct ttyprintk_port *tpkp = tty->driver_data; |
| |
| if (!tpkp) |
| return -EINVAL; |
| |
| switch (cmd) { |
| /* Stop TIOCCONS */ |
| case TIOCCONS: |
| return -EOPNOTSUPP; |
| default: |
| return -ENOIOCTLCMD; |
| } |
| return 0; |
| } |
| |
| /* |
| * TTY operations hangup function. |
| */ |
| static void tpk_hangup(struct tty_struct *tty) |
| { |
| struct ttyprintk_port *tpkp = tty->driver_data; |
| |
| tty_port_hangup(&tpkp->port); |
| } |
| |
| static const struct tty_operations ttyprintk_ops = { |
| .open = tpk_open, |
| .close = tpk_close, |
| .write = tpk_write, |
| .write_room = tpk_write_room, |
| .ioctl = tpk_ioctl, |
| .hangup = tpk_hangup, |
| }; |
| |
| static const struct tty_port_operations null_ops = { }; |
| |
| static struct tty_driver *ttyprintk_driver; |
| |
| static int __init ttyprintk_init(void) |
| { |
| int ret; |
| |
| spin_lock_init(&tpk_port.spinlock); |
| |
| ttyprintk_driver = tty_alloc_driver(1, |
| TTY_DRIVER_RESET_TERMIOS | |
| TTY_DRIVER_REAL_RAW | |
| TTY_DRIVER_UNNUMBERED_NODE); |
| if (IS_ERR(ttyprintk_driver)) |
| return PTR_ERR(ttyprintk_driver); |
| |
| tty_port_init(&tpk_port.port); |
| tpk_port.port.ops = &null_ops; |
| |
| ttyprintk_driver->driver_name = "ttyprintk"; |
| ttyprintk_driver->name = "ttyprintk"; |
| ttyprintk_driver->major = TTYAUX_MAJOR; |
| ttyprintk_driver->minor_start = 3; |
| ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE; |
| ttyprintk_driver->init_termios = tty_std_termios; |
| ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET; |
| tty_set_operations(ttyprintk_driver, &ttyprintk_ops); |
| tty_port_link_device(&tpk_port.port, ttyprintk_driver, 0); |
| |
| ret = tty_register_driver(ttyprintk_driver); |
| if (ret < 0) { |
| printk(KERN_ERR "Couldn't register ttyprintk driver\n"); |
| goto error; |
| } |
| |
| return 0; |
| |
| error: |
| put_tty_driver(ttyprintk_driver); |
| tty_port_destroy(&tpk_port.port); |
| return ret; |
| } |
| |
| static void __exit ttyprintk_exit(void) |
| { |
| tty_unregister_driver(ttyprintk_driver); |
| put_tty_driver(ttyprintk_driver); |
| tty_port_destroy(&tpk_port.port); |
| } |
| |
| device_initcall(ttyprintk_init); |
| module_exit(ttyprintk_exit); |
| |
| MODULE_LICENSE("GPL"); |