| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * SCOM FSI Client device driver |
| * |
| * Copyright (C) IBM Corporation 2016 |
| */ |
| |
| #include <linux/fsi.h> |
| #include <linux/module.h> |
| #include <linux/cdev.h> |
| #include <linux/delay.h> |
| #include <linux/fs.h> |
| #include <linux/uaccess.h> |
| #include <linux/slab.h> |
| #include <linux/list.h> |
| |
| #include <uapi/linux/fsi.h> |
| |
| #define FSI_ENGID_SCOM 0x5 |
| |
| /* SCOM engine register set */ |
| #define SCOM_DATA0_REG 0x00 |
| #define SCOM_DATA1_REG 0x04 |
| #define SCOM_CMD_REG 0x08 |
| #define SCOM_FSI2PIB_RESET_REG 0x18 |
| #define SCOM_STATUS_REG 0x1C /* Read */ |
| #define SCOM_PIB_RESET_REG 0x1C /* Write */ |
| |
| /* Command register */ |
| #define SCOM_WRITE_CMD 0x80000000 |
| #define SCOM_READ_CMD 0x00000000 |
| |
| /* Status register bits */ |
| #define SCOM_STATUS_ERR_SUMMARY 0x80000000 |
| #define SCOM_STATUS_PROTECTION 0x01000000 |
| #define SCOM_STATUS_PARITY 0x04000000 |
| #define SCOM_STATUS_PIB_ABORT 0x00100000 |
| #define SCOM_STATUS_PIB_RESP_MASK 0x00007000 |
| #define SCOM_STATUS_PIB_RESP_SHIFT 12 |
| |
| #define SCOM_STATUS_FSI2PIB_ERROR (SCOM_STATUS_PROTECTION | \ |
| SCOM_STATUS_PARITY | \ |
| SCOM_STATUS_PIB_ABORT) |
| #define SCOM_STATUS_ANY_ERR (SCOM_STATUS_FSI2PIB_ERROR | \ |
| SCOM_STATUS_PIB_RESP_MASK) |
| /* SCOM address encodings */ |
| #define XSCOM_ADDR_IND_FLAG BIT_ULL(63) |
| #define XSCOM_ADDR_INF_FORM1 BIT_ULL(60) |
| |
| /* SCOM indirect stuff */ |
| #define XSCOM_ADDR_DIRECT_PART 0x7fffffffull |
| #define XSCOM_ADDR_INDIRECT_PART 0x000fffff00000000ull |
| #define XSCOM_DATA_IND_READ BIT_ULL(63) |
| #define XSCOM_DATA_IND_COMPLETE BIT_ULL(31) |
| #define XSCOM_DATA_IND_ERR_MASK 0x70000000ull |
| #define XSCOM_DATA_IND_ERR_SHIFT 28 |
| #define XSCOM_DATA_IND_DATA 0x0000ffffull |
| #define XSCOM_DATA_IND_FORM1_DATA 0x000fffffffffffffull |
| #define XSCOM_ADDR_FORM1_LOW 0x000ffffffffull |
| #define XSCOM_ADDR_FORM1_HI 0xfff00000000ull |
| #define XSCOM_ADDR_FORM1_HI_SHIFT 20 |
| |
| /* Retries */ |
| #define SCOM_MAX_RETRIES 100 /* Retries on busy */ |
| #define SCOM_MAX_IND_RETRIES 10 /* Retries indirect not ready */ |
| |
| struct scom_device { |
| struct list_head link; |
| struct fsi_device *fsi_dev; |
| struct device dev; |
| struct cdev cdev; |
| struct mutex lock; |
| bool dead; |
| }; |
| |
| static int __put_scom(struct scom_device *scom_dev, uint64_t value, |
| uint32_t addr, uint32_t *status) |
| { |
| __be32 data, raw_status; |
| int rc; |
| |
| data = cpu_to_be32((value >> 32) & 0xffffffff); |
| rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data, |
| sizeof(uint32_t)); |
| if (rc) |
| return rc; |
| |
| data = cpu_to_be32(value & 0xffffffff); |
| rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA1_REG, &data, |
| sizeof(uint32_t)); |
| if (rc) |
| return rc; |
| |
| data = cpu_to_be32(SCOM_WRITE_CMD | addr); |
| rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data, |
| sizeof(uint32_t)); |
| if (rc) |
| return rc; |
| rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status, |
| sizeof(uint32_t)); |
| if (rc) |
| return rc; |
| *status = be32_to_cpu(raw_status); |
| |
| return 0; |
| } |
| |
| static int __get_scom(struct scom_device *scom_dev, uint64_t *value, |
| uint32_t addr, uint32_t *status) |
| { |
| __be32 data, raw_status; |
| int rc; |
| |
| |
| *value = 0ULL; |
| data = cpu_to_be32(SCOM_READ_CMD | addr); |
| rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data, |
| sizeof(uint32_t)); |
| if (rc) |
| return rc; |
| rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status, |
| sizeof(uint32_t)); |
| if (rc) |
| return rc; |
| |
| /* |
| * Read the data registers even on error, so we don't have |
| * to interpret the status register here. |
| */ |
| rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA0_REG, &data, |
| sizeof(uint32_t)); |
| if (rc) |
| return rc; |
| *value |= (uint64_t)be32_to_cpu(data) << 32; |
| rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA1_REG, &data, |
| sizeof(uint32_t)); |
| if (rc) |
| return rc; |
| *value |= be32_to_cpu(data); |
| *status = be32_to_cpu(raw_status); |
| |
| return rc; |
| } |
| |
| static int put_indirect_scom_form0(struct scom_device *scom, uint64_t value, |
| uint64_t addr, uint32_t *status) |
| { |
| uint64_t ind_data, ind_addr; |
| int rc, retries, err = 0; |
| |
| if (value & ~XSCOM_DATA_IND_DATA) |
| return -EINVAL; |
| |
| ind_addr = addr & XSCOM_ADDR_DIRECT_PART; |
| ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | value; |
| rc = __put_scom(scom, ind_data, ind_addr, status); |
| if (rc || (*status & SCOM_STATUS_ANY_ERR)) |
| return rc; |
| |
| for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) { |
| rc = __get_scom(scom, &ind_data, addr, status); |
| if (rc || (*status & SCOM_STATUS_ANY_ERR)) |
| return rc; |
| |
| err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT; |
| *status = err << SCOM_STATUS_PIB_RESP_SHIFT; |
| if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED)) |
| return 0; |
| |
| msleep(1); |
| } |
| return rc; |
| } |
| |
| static int put_indirect_scom_form1(struct scom_device *scom, uint64_t value, |
| uint64_t addr, uint32_t *status) |
| { |
| uint64_t ind_data, ind_addr; |
| |
| if (value & ~XSCOM_DATA_IND_FORM1_DATA) |
| return -EINVAL; |
| |
| ind_addr = addr & XSCOM_ADDR_FORM1_LOW; |
| ind_data = value | (addr & XSCOM_ADDR_FORM1_HI) << XSCOM_ADDR_FORM1_HI_SHIFT; |
| return __put_scom(scom, ind_data, ind_addr, status); |
| } |
| |
| static int get_indirect_scom_form0(struct scom_device *scom, uint64_t *value, |
| uint64_t addr, uint32_t *status) |
| { |
| uint64_t ind_data, ind_addr; |
| int rc, retries, err = 0; |
| |
| ind_addr = addr & XSCOM_ADDR_DIRECT_PART; |
| ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | XSCOM_DATA_IND_READ; |
| rc = __put_scom(scom, ind_data, ind_addr, status); |
| if (rc || (*status & SCOM_STATUS_ANY_ERR)) |
| return rc; |
| |
| for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) { |
| rc = __get_scom(scom, &ind_data, addr, status); |
| if (rc || (*status & SCOM_STATUS_ANY_ERR)) |
| return rc; |
| |
| err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT; |
| *status = err << SCOM_STATUS_PIB_RESP_SHIFT; |
| *value = ind_data & XSCOM_DATA_IND_DATA; |
| |
| if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED)) |
| return 0; |
| |
| msleep(1); |
| } |
| return rc; |
| } |
| |
| static int raw_put_scom(struct scom_device *scom, uint64_t value, |
| uint64_t addr, uint32_t *status) |
| { |
| if (addr & XSCOM_ADDR_IND_FLAG) { |
| if (addr & XSCOM_ADDR_INF_FORM1) |
| return put_indirect_scom_form1(scom, value, addr, status); |
| else |
| return put_indirect_scom_form0(scom, value, addr, status); |
| } else |
| return __put_scom(scom, value, addr, status); |
| } |
| |
| static int raw_get_scom(struct scom_device *scom, uint64_t *value, |
| uint64_t addr, uint32_t *status) |
| { |
| if (addr & XSCOM_ADDR_IND_FLAG) { |
| if (addr & XSCOM_ADDR_INF_FORM1) |
| return -ENXIO; |
| return get_indirect_scom_form0(scom, value, addr, status); |
| } else |
| return __get_scom(scom, value, addr, status); |
| } |
| |
| static int handle_fsi2pib_status(struct scom_device *scom, uint32_t status) |
| { |
| uint32_t dummy = -1; |
| |
| if (status & SCOM_STATUS_FSI2PIB_ERROR) |
| fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy, |
| sizeof(uint32_t)); |
| |
| if (status & SCOM_STATUS_PROTECTION) |
| return -EPERM; |
| if (status & SCOM_STATUS_PARITY) |
| return -EIO; |
| /* Return -EBUSY on PIB abort to force a retry */ |
| if (status & SCOM_STATUS_PIB_ABORT) |
| return -EBUSY; |
| return 0; |
| } |
| |
| static int handle_pib_status(struct scom_device *scom, uint8_t status) |
| { |
| uint32_t dummy = -1; |
| |
| if (status == SCOM_PIB_SUCCESS) |
| return 0; |
| if (status == SCOM_PIB_BLOCKED) |
| return -EBUSY; |
| |
| /* Reset the bridge */ |
| fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy, |
| sizeof(uint32_t)); |
| |
| switch(status) { |
| case SCOM_PIB_OFFLINE: |
| return -ENODEV; |
| case SCOM_PIB_BAD_ADDR: |
| return -ENXIO; |
| case SCOM_PIB_TIMEOUT: |
| return -ETIMEDOUT; |
| case SCOM_PIB_PARTIAL: |
| case SCOM_PIB_CLK_ERR: |
| case SCOM_PIB_PARITY_ERR: |
| default: |
| return -EIO; |
| } |
| } |
| |
| static int put_scom(struct scom_device *scom, uint64_t value, |
| uint64_t addr) |
| { |
| uint32_t status, dummy = -1; |
| int rc, retries; |
| |
| for (retries = 0; retries < SCOM_MAX_RETRIES; retries++) { |
| rc = raw_put_scom(scom, value, addr, &status); |
| if (rc) { |
| /* Try resetting the bridge if FSI fails */ |
| if (rc != -ENODEV && retries == 0) { |
| fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, |
| &dummy, sizeof(uint32_t)); |
| rc = -EBUSY; |
| } else |
| return rc; |
| } else |
| rc = handle_fsi2pib_status(scom, status); |
| if (rc && rc != -EBUSY) |
| break; |
| if (rc == 0) { |
| rc = handle_pib_status(scom, |
| (status & SCOM_STATUS_PIB_RESP_MASK) |
| >> SCOM_STATUS_PIB_RESP_SHIFT); |
| if (rc && rc != -EBUSY) |
| break; |
| } |
| if (rc == 0) |
| break; |
| msleep(1); |
| } |
| return rc; |
| } |
| |
| static int get_scom(struct scom_device *scom, uint64_t *value, |
| uint64_t addr) |
| { |
| uint32_t status, dummy = -1; |
| int rc, retries; |
| |
| for (retries = 0; retries < SCOM_MAX_RETRIES; retries++) { |
| rc = raw_get_scom(scom, value, addr, &status); |
| if (rc) { |
| /* Try resetting the bridge if FSI fails */ |
| if (rc != -ENODEV && retries == 0) { |
| fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, |
| &dummy, sizeof(uint32_t)); |
| rc = -EBUSY; |
| } else |
| return rc; |
| } else |
| rc = handle_fsi2pib_status(scom, status); |
| if (rc && rc != -EBUSY) |
| break; |
| if (rc == 0) { |
| rc = handle_pib_status(scom, |
| (status & SCOM_STATUS_PIB_RESP_MASK) |
| >> SCOM_STATUS_PIB_RESP_SHIFT); |
| if (rc && rc != -EBUSY) |
| break; |
| } |
| if (rc == 0) |
| break; |
| msleep(1); |
| } |
| return rc; |
| } |
| |
| static ssize_t scom_read(struct file *filep, char __user *buf, size_t len, |
| loff_t *offset) |
| { |
| struct scom_device *scom = filep->private_data; |
| struct device *dev = &scom->fsi_dev->dev; |
| uint64_t val; |
| int rc; |
| |
| if (len != sizeof(uint64_t)) |
| return -EINVAL; |
| |
| mutex_lock(&scom->lock); |
| if (scom->dead) |
| rc = -ENODEV; |
| else |
| rc = get_scom(scom, &val, *offset); |
| mutex_unlock(&scom->lock); |
| if (rc) { |
| dev_dbg(dev, "get_scom fail:%d\n", rc); |
| return rc; |
| } |
| |
| rc = copy_to_user(buf, &val, len); |
| if (rc) |
| dev_dbg(dev, "copy to user failed:%d\n", rc); |
| |
| return rc ? rc : len; |
| } |
| |
| static ssize_t scom_write(struct file *filep, const char __user *buf, |
| size_t len, loff_t *offset) |
| { |
| int rc; |
| struct scom_device *scom = filep->private_data; |
| struct device *dev = &scom->fsi_dev->dev; |
| uint64_t val; |
| |
| if (len != sizeof(uint64_t)) |
| return -EINVAL; |
| |
| rc = copy_from_user(&val, buf, len); |
| if (rc) { |
| dev_dbg(dev, "copy from user failed:%d\n", rc); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&scom->lock); |
| if (scom->dead) |
| rc = -ENODEV; |
| else |
| rc = put_scom(scom, val, *offset); |
| mutex_unlock(&scom->lock); |
| if (rc) { |
| dev_dbg(dev, "put_scom failed with:%d\n", rc); |
| return rc; |
| } |
| |
| return len; |
| } |
| |
| static loff_t scom_llseek(struct file *file, loff_t offset, int whence) |
| { |
| switch (whence) { |
| case SEEK_CUR: |
| break; |
| case SEEK_SET: |
| file->f_pos = offset; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return offset; |
| } |
| |
| static void raw_convert_status(struct scom_access *acc, uint32_t status) |
| { |
| acc->pib_status = (status & SCOM_STATUS_PIB_RESP_MASK) >> |
| SCOM_STATUS_PIB_RESP_SHIFT; |
| acc->intf_errors = 0; |
| |
| if (status & SCOM_STATUS_PROTECTION) |
| acc->intf_errors |= SCOM_INTF_ERR_PROTECTION; |
| else if (status & SCOM_STATUS_PARITY) |
| acc->intf_errors |= SCOM_INTF_ERR_PARITY; |
| else if (status & SCOM_STATUS_PIB_ABORT) |
| acc->intf_errors |= SCOM_INTF_ERR_ABORT; |
| else if (status & SCOM_STATUS_ERR_SUMMARY) |
| acc->intf_errors |= SCOM_INTF_ERR_UNKNOWN; |
| } |
| |
| static int scom_raw_read(struct scom_device *scom, void __user *argp) |
| { |
| struct scom_access acc; |
| uint32_t status; |
| int rc; |
| |
| if (copy_from_user(&acc, argp, sizeof(struct scom_access))) |
| return -EFAULT; |
| |
| rc = raw_get_scom(scom, &acc.data, acc.addr, &status); |
| if (rc) |
| return rc; |
| raw_convert_status(&acc, status); |
| if (copy_to_user(argp, &acc, sizeof(struct scom_access))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static int scom_raw_write(struct scom_device *scom, void __user *argp) |
| { |
| u64 prev_data, mask, data; |
| struct scom_access acc; |
| uint32_t status; |
| int rc; |
| |
| if (copy_from_user(&acc, argp, sizeof(struct scom_access))) |
| return -EFAULT; |
| |
| if (acc.mask) { |
| rc = raw_get_scom(scom, &prev_data, acc.addr, &status); |
| if (rc) |
| return rc; |
| if (status & SCOM_STATUS_ANY_ERR) |
| goto fail; |
| mask = acc.mask; |
| } else { |
| prev_data = mask = -1ull; |
| } |
| data = (prev_data & ~mask) | (acc.data & mask); |
| rc = raw_put_scom(scom, data, acc.addr, &status); |
| if (rc) |
| return rc; |
| fail: |
| raw_convert_status(&acc, status); |
| if (copy_to_user(argp, &acc, sizeof(struct scom_access))) |
| return -EFAULT; |
| return 0; |
| } |
| |
| static int scom_reset(struct scom_device *scom, void __user *argp) |
| { |
| uint32_t flags, dummy = -1; |
| int rc = 0; |
| |
| if (get_user(flags, (__u32 __user *)argp)) |
| return -EFAULT; |
| if (flags & SCOM_RESET_PIB) |
| rc = fsi_device_write(scom->fsi_dev, SCOM_PIB_RESET_REG, &dummy, |
| sizeof(uint32_t)); |
| if (!rc && (flags & (SCOM_RESET_PIB | SCOM_RESET_INTF))) |
| rc = fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy, |
| sizeof(uint32_t)); |
| return rc; |
| } |
| |
| static int scom_check(struct scom_device *scom, void __user *argp) |
| { |
| /* Still need to find out how to get "protected" */ |
| return put_user(SCOM_CHECK_SUPPORTED, (__u32 __user *)argp); |
| } |
| |
| static long scom_ioctl(struct file *file, unsigned int cmd, unsigned long arg) |
| { |
| struct scom_device *scom = file->private_data; |
| void __user *argp = (void __user *)arg; |
| int rc = -ENOTTY; |
| |
| mutex_lock(&scom->lock); |
| if (scom->dead) { |
| mutex_unlock(&scom->lock); |
| return -ENODEV; |
| } |
| switch(cmd) { |
| case FSI_SCOM_CHECK: |
| rc = scom_check(scom, argp); |
| break; |
| case FSI_SCOM_READ: |
| rc = scom_raw_read(scom, argp); |
| break; |
| case FSI_SCOM_WRITE: |
| rc = scom_raw_write(scom, argp); |
| break; |
| case FSI_SCOM_RESET: |
| rc = scom_reset(scom, argp); |
| break; |
| } |
| mutex_unlock(&scom->lock); |
| return rc; |
| } |
| |
| static int scom_open(struct inode *inode, struct file *file) |
| { |
| struct scom_device *scom = container_of(inode->i_cdev, struct scom_device, cdev); |
| |
| file->private_data = scom; |
| |
| return 0; |
| } |
| |
| static const struct file_operations scom_fops = { |
| .owner = THIS_MODULE, |
| .open = scom_open, |
| .llseek = scom_llseek, |
| .read = scom_read, |
| .write = scom_write, |
| .unlocked_ioctl = scom_ioctl, |
| }; |
| |
| static void scom_free(struct device *dev) |
| { |
| struct scom_device *scom = container_of(dev, struct scom_device, dev); |
| |
| put_device(&scom->fsi_dev->dev); |
| kfree(scom); |
| } |
| |
| static int scom_probe(struct device *dev) |
| { |
| struct fsi_device *fsi_dev = to_fsi_dev(dev); |
| struct scom_device *scom; |
| int rc, didx; |
| |
| scom = kzalloc(sizeof(*scom), GFP_KERNEL); |
| if (!scom) |
| return -ENOMEM; |
| dev_set_drvdata(dev, scom); |
| mutex_init(&scom->lock); |
| |
| /* Grab a reference to the device (parent of our cdev), we'll drop it later */ |
| if (!get_device(dev)) { |
| kfree(scom); |
| return -ENODEV; |
| } |
| scom->fsi_dev = fsi_dev; |
| |
| /* Create chardev for userspace access */ |
| scom->dev.type = &fsi_cdev_type; |
| scom->dev.parent = dev; |
| scom->dev.release = scom_free; |
| device_initialize(&scom->dev); |
| |
| /* Allocate a minor in the FSI space */ |
| rc = fsi_get_new_minor(fsi_dev, fsi_dev_scom, &scom->dev.devt, &didx); |
| if (rc) |
| goto err; |
| |
| dev_set_name(&scom->dev, "scom%d", didx); |
| cdev_init(&scom->cdev, &scom_fops); |
| rc = cdev_device_add(&scom->cdev, &scom->dev); |
| if (rc) { |
| dev_err(dev, "Error %d creating char device %s\n", |
| rc, dev_name(&scom->dev)); |
| goto err_free_minor; |
| } |
| |
| return 0; |
| err_free_minor: |
| fsi_free_minor(scom->dev.devt); |
| err: |
| put_device(&scom->dev); |
| return rc; |
| } |
| |
| static int scom_remove(struct device *dev) |
| { |
| struct scom_device *scom = dev_get_drvdata(dev); |
| |
| mutex_lock(&scom->lock); |
| scom->dead = true; |
| mutex_unlock(&scom->lock); |
| cdev_device_del(&scom->cdev, &scom->dev); |
| fsi_free_minor(scom->dev.devt); |
| put_device(&scom->dev); |
| |
| return 0; |
| } |
| |
| static const struct fsi_device_id scom_ids[] = { |
| { |
| .engine_type = FSI_ENGID_SCOM, |
| .version = FSI_VERSION_ANY, |
| }, |
| { 0 } |
| }; |
| |
| static struct fsi_driver scom_drv = { |
| .id_table = scom_ids, |
| .drv = { |
| .name = "scom", |
| .bus = &fsi_bus_type, |
| .probe = scom_probe, |
| .remove = scom_remove, |
| } |
| }; |
| |
| static int scom_init(void) |
| { |
| return fsi_driver_register(&scom_drv); |
| } |
| |
| static void scom_exit(void) |
| { |
| fsi_driver_unregister(&scom_drv); |
| } |
| |
| module_init(scom_init); |
| module_exit(scom_exit); |
| MODULE_LICENSE("GPL"); |