| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * kernel/power/hibernate.c - Hibernation (a.k.a suspend-to-disk) support. |
| * |
| * Copyright (c) 2003 Patrick Mochel |
| * Copyright (c) 2003 Open Source Development Lab |
| * Copyright (c) 2004 Pavel Machek <pavel@ucw.cz> |
| * Copyright (c) 2009 Rafael J. Wysocki, Novell Inc. |
| * Copyright (C) 2012 Bojan Smojver <bojan@rexursive.com> |
| */ |
| |
| #define pr_fmt(fmt) "PM: hibernation: " fmt |
| |
| #include <linux/export.h> |
| #include <linux/suspend.h> |
| #include <linux/reboot.h> |
| #include <linux/string.h> |
| #include <linux/device.h> |
| #include <linux/async.h> |
| #include <linux/delay.h> |
| #include <linux/fs.h> |
| #include <linux/mount.h> |
| #include <linux/pm.h> |
| #include <linux/nmi.h> |
| #include <linux/console.h> |
| #include <linux/cpu.h> |
| #include <linux/freezer.h> |
| #include <linux/gfp.h> |
| #include <linux/syscore_ops.h> |
| #include <linux/ctype.h> |
| #include <linux/genhd.h> |
| #include <linux/ktime.h> |
| #include <linux/security.h> |
| #include <trace/events/power.h> |
| |
| #include "power.h" |
| |
| |
| static int nocompress; |
| static int noresume; |
| static int nohibernate; |
| static int resume_wait; |
| static unsigned int resume_delay; |
| static char resume_file[256] = CONFIG_PM_STD_PARTITION; |
| dev_t swsusp_resume_device; |
| sector_t swsusp_resume_block; |
| __visible int in_suspend __nosavedata; |
| |
| enum { |
| HIBERNATION_INVALID, |
| HIBERNATION_PLATFORM, |
| HIBERNATION_SHUTDOWN, |
| HIBERNATION_REBOOT, |
| #ifdef CONFIG_SUSPEND |
| HIBERNATION_SUSPEND, |
| #endif |
| HIBERNATION_TEST_RESUME, |
| /* keep last */ |
| __HIBERNATION_AFTER_LAST |
| }; |
| #define HIBERNATION_MAX (__HIBERNATION_AFTER_LAST-1) |
| #define HIBERNATION_FIRST (HIBERNATION_INVALID + 1) |
| |
| static int hibernation_mode = HIBERNATION_SHUTDOWN; |
| |
| bool freezer_test_done; |
| |
| static const struct platform_hibernation_ops *hibernation_ops; |
| |
| static atomic_t hibernate_atomic = ATOMIC_INIT(1); |
| |
| bool hibernate_acquire(void) |
| { |
| return atomic_add_unless(&hibernate_atomic, -1, 0); |
| } |
| |
| void hibernate_release(void) |
| { |
| atomic_inc(&hibernate_atomic); |
| } |
| |
| bool hibernation_available(void) |
| { |
| return nohibernate == 0 && !security_locked_down(LOCKDOWN_HIBERNATION); |
| } |
| |
| /** |
| * hibernation_set_ops - Set the global hibernate operations. |
| * @ops: Hibernation operations to use in subsequent hibernation transitions. |
| */ |
| void hibernation_set_ops(const struct platform_hibernation_ops *ops) |
| { |
| if (ops && !(ops->begin && ops->end && ops->pre_snapshot |
| && ops->prepare && ops->finish && ops->enter && ops->pre_restore |
| && ops->restore_cleanup && ops->leave)) { |
| WARN_ON(1); |
| return; |
| } |
| lock_system_sleep(); |
| hibernation_ops = ops; |
| if (ops) |
| hibernation_mode = HIBERNATION_PLATFORM; |
| else if (hibernation_mode == HIBERNATION_PLATFORM) |
| hibernation_mode = HIBERNATION_SHUTDOWN; |
| |
| unlock_system_sleep(); |
| } |
| EXPORT_SYMBOL_GPL(hibernation_set_ops); |
| |
| static bool entering_platform_hibernation; |
| |
| bool system_entering_hibernation(void) |
| { |
| return entering_platform_hibernation; |
| } |
| EXPORT_SYMBOL(system_entering_hibernation); |
| |
| #ifdef CONFIG_PM_DEBUG |
| static void hibernation_debug_sleep(void) |
| { |
| pr_info("debug: Waiting for 5 seconds.\n"); |
| mdelay(5000); |
| } |
| |
| static int hibernation_test(int level) |
| { |
| if (pm_test_level == level) { |
| hibernation_debug_sleep(); |
| return 1; |
| } |
| return 0; |
| } |
| #else /* !CONFIG_PM_DEBUG */ |
| static int hibernation_test(int level) { return 0; } |
| #endif /* !CONFIG_PM_DEBUG */ |
| |
| /** |
| * platform_begin - Call platform to start hibernation. |
| * @platform_mode: Whether or not to use the platform driver. |
| */ |
| static int platform_begin(int platform_mode) |
| { |
| return (platform_mode && hibernation_ops) ? |
| hibernation_ops->begin(PMSG_FREEZE) : 0; |
| } |
| |
| /** |
| * platform_end - Call platform to finish transition to the working state. |
| * @platform_mode: Whether or not to use the platform driver. |
| */ |
| static void platform_end(int platform_mode) |
| { |
| if (platform_mode && hibernation_ops) |
| hibernation_ops->end(); |
| } |
| |
| /** |
| * platform_pre_snapshot - Call platform to prepare the machine for hibernation. |
| * @platform_mode: Whether or not to use the platform driver. |
| * |
| * Use the platform driver to prepare the system for creating a hibernate image, |
| * if so configured, and return an error code if that fails. |
| */ |
| |
| static int platform_pre_snapshot(int platform_mode) |
| { |
| return (platform_mode && hibernation_ops) ? |
| hibernation_ops->pre_snapshot() : 0; |
| } |
| |
| /** |
| * platform_leave - Call platform to prepare a transition to the working state. |
| * @platform_mode: Whether or not to use the platform driver. |
| * |
| * Use the platform driver prepare to prepare the machine for switching to the |
| * normal mode of operation. |
| * |
| * This routine is called on one CPU with interrupts disabled. |
| */ |
| static void platform_leave(int platform_mode) |
| { |
| if (platform_mode && hibernation_ops) |
| hibernation_ops->leave(); |
| } |
| |
| /** |
| * platform_finish - Call platform to switch the system to the working state. |
| * @platform_mode: Whether or not to use the platform driver. |
| * |
| * Use the platform driver to switch the machine to the normal mode of |
| * operation. |
| * |
| * This routine must be called after platform_prepare(). |
| */ |
| static void platform_finish(int platform_mode) |
| { |
| if (platform_mode && hibernation_ops) |
| hibernation_ops->finish(); |
| } |
| |
| /** |
| * platform_pre_restore - Prepare for hibernate image restoration. |
| * @platform_mode: Whether or not to use the platform driver. |
| * |
| * Use the platform driver to prepare the system for resume from a hibernation |
| * image. |
| * |
| * If the restore fails after this function has been called, |
| * platform_restore_cleanup() must be called. |
| */ |
| static int platform_pre_restore(int platform_mode) |
| { |
| return (platform_mode && hibernation_ops) ? |
| hibernation_ops->pre_restore() : 0; |
| } |
| |
| /** |
| * platform_restore_cleanup - Switch to the working state after failing restore. |
| * @platform_mode: Whether or not to use the platform driver. |
| * |
| * Use the platform driver to switch the system to the normal mode of operation |
| * after a failing restore. |
| * |
| * If platform_pre_restore() has been called before the failing restore, this |
| * function must be called too, regardless of the result of |
| * platform_pre_restore(). |
| */ |
| static void platform_restore_cleanup(int platform_mode) |
| { |
| if (platform_mode && hibernation_ops) |
| hibernation_ops->restore_cleanup(); |
| } |
| |
| /** |
| * platform_recover - Recover from a failure to suspend devices. |
| * @platform_mode: Whether or not to use the platform driver. |
| */ |
| static void platform_recover(int platform_mode) |
| { |
| if (platform_mode && hibernation_ops && hibernation_ops->recover) |
| hibernation_ops->recover(); |
| } |
| |
| /** |
| * swsusp_show_speed - Print time elapsed between two events during hibernation. |
| * @start: Starting event. |
| * @stop: Final event. |
| * @nr_pages: Number of memory pages processed between @start and @stop. |
| * @msg: Additional diagnostic message to print. |
| */ |
| void swsusp_show_speed(ktime_t start, ktime_t stop, |
| unsigned nr_pages, char *msg) |
| { |
| ktime_t diff; |
| u64 elapsed_centisecs64; |
| unsigned int centisecs; |
| unsigned int k; |
| unsigned int kps; |
| |
| diff = ktime_sub(stop, start); |
| elapsed_centisecs64 = ktime_divns(diff, 10*NSEC_PER_MSEC); |
| centisecs = elapsed_centisecs64; |
| if (centisecs == 0) |
| centisecs = 1; /* avoid div-by-zero */ |
| k = nr_pages * (PAGE_SIZE / 1024); |
| kps = (k * 100) / centisecs; |
| pr_info("%s %u kbytes in %u.%02u seconds (%u.%02u MB/s)\n", |
| msg, k, centisecs / 100, centisecs % 100, kps / 1000, |
| (kps % 1000) / 10); |
| } |
| |
| __weak int arch_resume_nosmt(void) |
| { |
| return 0; |
| } |
| |
| /** |
| * create_image - Create a hibernation image. |
| * @platform_mode: Whether or not to use the platform driver. |
| * |
| * Execute device drivers' "late" and "noirq" freeze callbacks, create a |
| * hibernation image and run the drivers' "noirq" and "early" thaw callbacks. |
| * |
| * Control reappears in this routine after the subsequent restore. |
| */ |
| static int create_image(int platform_mode) |
| { |
| int error; |
| |
| error = dpm_suspend_end(PMSG_FREEZE); |
| if (error) { |
| pr_err("Some devices failed to power down, aborting\n"); |
| return error; |
| } |
| |
| error = platform_pre_snapshot(platform_mode); |
| if (error || hibernation_test(TEST_PLATFORM)) |
| goto Platform_finish; |
| |
| error = suspend_disable_secondary_cpus(); |
| if (error || hibernation_test(TEST_CPUS)) |
| goto Enable_cpus; |
| |
| local_irq_disable(); |
| |
| system_state = SYSTEM_SUSPEND; |
| |
| error = syscore_suspend(); |
| if (error) { |
| pr_err("Some system devices failed to power down, aborting\n"); |
| goto Enable_irqs; |
| } |
| |
| if (hibernation_test(TEST_CORE) || pm_wakeup_pending()) |
| goto Power_up; |
| |
| in_suspend = 1; |
| save_processor_state(); |
| trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, true); |
| error = swsusp_arch_suspend(); |
| /* Restore control flow magically appears here */ |
| restore_processor_state(); |
| trace_suspend_resume(TPS("machine_suspend"), PM_EVENT_HIBERNATE, false); |
| if (error) |
| pr_err("Error %d creating image\n", error); |
| |
| if (!in_suspend) { |
| events_check_enabled = false; |
| clear_or_poison_free_pages(); |
| } |
| |
| platform_leave(platform_mode); |
| |
| Power_up: |
| syscore_resume(); |
| |
| Enable_irqs: |
| system_state = SYSTEM_RUNNING; |
| local_irq_enable(); |
| |
| Enable_cpus: |
| suspend_enable_secondary_cpus(); |
| |
| /* Allow architectures to do nosmt-specific post-resume dances */ |
| if (!in_suspend) |
| error = arch_resume_nosmt(); |
| |
| Platform_finish: |
| platform_finish(platform_mode); |
| |
| dpm_resume_start(in_suspend ? |
| (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE); |
| |
| return error; |
| } |
| |
| /** |
| * hibernation_snapshot - Quiesce devices and create a hibernation image. |
| * @platform_mode: If set, use platform driver to prepare for the transition. |
| * |
| * This routine must be called with system_transition_mutex held. |
| */ |
| int hibernation_snapshot(int platform_mode) |
| { |
| pm_message_t msg; |
| int error; |
| |
| pm_suspend_clear_flags(); |
| error = platform_begin(platform_mode); |
| if (error) |
| goto Close; |
| |
| /* Preallocate image memory before shutting down devices. */ |
| error = hibernate_preallocate_memory(); |
| if (error) |
| goto Close; |
| |
| error = freeze_kernel_threads(); |
| if (error) |
| goto Cleanup; |
| |
| if (hibernation_test(TEST_FREEZER)) { |
| |
| /* |
| * Indicate to the caller that we are returning due to a |
| * successful freezer test. |
| */ |
| freezer_test_done = true; |
| goto Thaw; |
| } |
| |
| error = dpm_prepare(PMSG_FREEZE); |
| if (error) { |
| dpm_complete(PMSG_RECOVER); |
| goto Thaw; |
| } |
| |
| suspend_console(); |
| pm_restrict_gfp_mask(); |
| |
| error = dpm_suspend(PMSG_FREEZE); |
| |
| if (error || hibernation_test(TEST_DEVICES)) |
| platform_recover(platform_mode); |
| else |
| error = create_image(platform_mode); |
| |
| /* |
| * In the case that we call create_image() above, the control |
| * returns here (1) after the image has been created or the |
| * image creation has failed and (2) after a successful restore. |
| */ |
| |
| /* We may need to release the preallocated image pages here. */ |
| if (error || !in_suspend) |
| swsusp_free(); |
| |
| msg = in_suspend ? (error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE; |
| dpm_resume(msg); |
| |
| if (error || !in_suspend) |
| pm_restore_gfp_mask(); |
| |
| resume_console(); |
| dpm_complete(msg); |
| |
| Close: |
| platform_end(platform_mode); |
| return error; |
| |
| Thaw: |
| thaw_kernel_threads(); |
| Cleanup: |
| swsusp_free(); |
| goto Close; |
| } |
| |
| int __weak hibernate_resume_nonboot_cpu_disable(void) |
| { |
| return suspend_disable_secondary_cpus(); |
| } |
| |
| /** |
| * resume_target_kernel - Restore system state from a hibernation image. |
| * @platform_mode: Whether or not to use the platform driver. |
| * |
| * Execute device drivers' "noirq" and "late" freeze callbacks, restore the |
| * contents of highmem that have not been restored yet from the image and run |
| * the low-level code that will restore the remaining contents of memory and |
| * switch to the just restored target kernel. |
| */ |
| static int resume_target_kernel(bool platform_mode) |
| { |
| int error; |
| |
| error = dpm_suspend_end(PMSG_QUIESCE); |
| if (error) { |
| pr_err("Some devices failed to power down, aborting resume\n"); |
| return error; |
| } |
| |
| error = platform_pre_restore(platform_mode); |
| if (error) |
| goto Cleanup; |
| |
| error = hibernate_resume_nonboot_cpu_disable(); |
| if (error) |
| goto Enable_cpus; |
| |
| local_irq_disable(); |
| system_state = SYSTEM_SUSPEND; |
| |
| error = syscore_suspend(); |
| if (error) |
| goto Enable_irqs; |
| |
| save_processor_state(); |
| error = restore_highmem(); |
| if (!error) { |
| error = swsusp_arch_resume(); |
| /* |
| * The code below is only ever reached in case of a failure. |
| * Otherwise, execution continues at the place where |
| * swsusp_arch_suspend() was called. |
| */ |
| BUG_ON(!error); |
| /* |
| * This call to restore_highmem() reverts the changes made by |
| * the previous one. |
| */ |
| restore_highmem(); |
| } |
| /* |
| * The only reason why swsusp_arch_resume() can fail is memory being |
| * very tight, so we have to free it as soon as we can to avoid |
| * subsequent failures. |
| */ |
| swsusp_free(); |
| restore_processor_state(); |
| touch_softlockup_watchdog(); |
| |
| syscore_resume(); |
| |
| Enable_irqs: |
| system_state = SYSTEM_RUNNING; |
| local_irq_enable(); |
| |
| Enable_cpus: |
| suspend_enable_secondary_cpus(); |
| |
| Cleanup: |
| platform_restore_cleanup(platform_mode); |
| |
| dpm_resume_start(PMSG_RECOVER); |
| |
| return error; |
| } |
| |
| /** |
| * hibernation_restore - Quiesce devices and restore from a hibernation image. |
| * @platform_mode: If set, use platform driver to prepare for the transition. |
| * |
| * This routine must be called with system_transition_mutex held. If it is |
| * successful, control reappears in the restored target kernel in |
| * hibernation_snapshot(). |
| */ |
| int hibernation_restore(int platform_mode) |
| { |
| int error; |
| |
| pm_prepare_console(); |
| suspend_console(); |
| pm_restrict_gfp_mask(); |
| error = dpm_suspend_start(PMSG_QUIESCE); |
| if (!error) { |
| error = resume_target_kernel(platform_mode); |
| /* |
| * The above should either succeed and jump to the new kernel, |
| * or return with an error. Otherwise things are just |
| * undefined, so let's be paranoid. |
| */ |
| BUG_ON(!error); |
| } |
| dpm_resume_end(PMSG_RECOVER); |
| pm_restore_gfp_mask(); |
| resume_console(); |
| pm_restore_console(); |
| return error; |
| } |
| |
| /** |
| * hibernation_platform_enter - Power off the system using the platform driver. |
| */ |
| int hibernation_platform_enter(void) |
| { |
| int error; |
| |
| if (!hibernation_ops) |
| return -ENOSYS; |
| |
| /* |
| * We have cancelled the power transition by running |
| * hibernation_ops->finish() before saving the image, so we should let |
| * the firmware know that we're going to enter the sleep state after all |
| */ |
| error = hibernation_ops->begin(PMSG_HIBERNATE); |
| if (error) |
| goto Close; |
| |
| entering_platform_hibernation = true; |
| suspend_console(); |
| error = dpm_suspend_start(PMSG_HIBERNATE); |
| if (error) { |
| if (hibernation_ops->recover) |
| hibernation_ops->recover(); |
| goto Resume_devices; |
| } |
| |
| error = dpm_suspend_end(PMSG_HIBERNATE); |
| if (error) |
| goto Resume_devices; |
| |
| error = hibernation_ops->prepare(); |
| if (error) |
| goto Platform_finish; |
| |
| error = suspend_disable_secondary_cpus(); |
| if (error) |
| goto Enable_cpus; |
| |
| local_irq_disable(); |
| system_state = SYSTEM_SUSPEND; |
| syscore_suspend(); |
| if (pm_wakeup_pending()) { |
| error = -EAGAIN; |
| goto Power_up; |
| } |
| |
| hibernation_ops->enter(); |
| /* We should never get here */ |
| while (1); |
| |
| Power_up: |
| syscore_resume(); |
| system_state = SYSTEM_RUNNING; |
| local_irq_enable(); |
| |
| Enable_cpus: |
| suspend_enable_secondary_cpus(); |
| |
| Platform_finish: |
| hibernation_ops->finish(); |
| |
| dpm_resume_start(PMSG_RESTORE); |
| |
| Resume_devices: |
| entering_platform_hibernation = false; |
| dpm_resume_end(PMSG_RESTORE); |
| resume_console(); |
| |
| Close: |
| hibernation_ops->end(); |
| |
| return error; |
| } |
| |
| /** |
| * power_down - Shut the machine down for hibernation. |
| * |
| * Use the platform driver, if configured, to put the system into the sleep |
| * state corresponding to hibernation, or try to power it off or reboot, |
| * depending on the value of hibernation_mode. |
| */ |
| static void power_down(void) |
| { |
| #ifdef CONFIG_SUSPEND |
| int error; |
| |
| if (hibernation_mode == HIBERNATION_SUSPEND) { |
| error = suspend_devices_and_enter(PM_SUSPEND_MEM); |
| if (error) { |
| hibernation_mode = hibernation_ops ? |
| HIBERNATION_PLATFORM : |
| HIBERNATION_SHUTDOWN; |
| } else { |
| /* Restore swap signature. */ |
| error = swsusp_unmark(); |
| if (error) |
| pr_err("Swap will be unusable! Try swapon -a.\n"); |
| |
| return; |
| } |
| } |
| #endif |
| |
| switch (hibernation_mode) { |
| case HIBERNATION_REBOOT: |
| kernel_restart(NULL); |
| break; |
| case HIBERNATION_PLATFORM: |
| hibernation_platform_enter(); |
| fallthrough; |
| case HIBERNATION_SHUTDOWN: |
| if (pm_power_off) |
| kernel_power_off(); |
| break; |
| } |
| kernel_halt(); |
| /* |
| * Valid image is on the disk, if we continue we risk serious data |
| * corruption after resume. |
| */ |
| pr_crit("Power down manually\n"); |
| while (1) |
| cpu_relax(); |
| } |
| |
| static int load_image_and_restore(void) |
| { |
| int error; |
| unsigned int flags; |
| |
| pm_pr_dbg("Loading hibernation image.\n"); |
| |
| lock_device_hotplug(); |
| error = create_basic_memory_bitmaps(); |
| if (error) |
| goto Unlock; |
| |
| error = swsusp_read(&flags); |
| swsusp_close(FMODE_READ | FMODE_EXCL); |
| if (!error) |
| error = hibernation_restore(flags & SF_PLATFORM_MODE); |
| |
| pr_err("Failed to load image, recovering.\n"); |
| swsusp_free(); |
| free_basic_memory_bitmaps(); |
| Unlock: |
| unlock_device_hotplug(); |
| |
| return error; |
| } |
| |
| /** |
| * hibernate - Carry out system hibernation, including saving the image. |
| */ |
| int hibernate(void) |
| { |
| bool snapshot_test = false; |
| int error; |
| |
| if (!hibernation_available()) { |
| pm_pr_dbg("Hibernation not available.\n"); |
| return -EPERM; |
| } |
| |
| lock_system_sleep(); |
| /* The snapshot device should not be opened while we're running */ |
| if (!hibernate_acquire()) { |
| error = -EBUSY; |
| goto Unlock; |
| } |
| |
| pr_info("hibernation entry\n"); |
| pm_prepare_console(); |
| error = pm_notifier_call_chain_robust(PM_HIBERNATION_PREPARE, PM_POST_HIBERNATION); |
| if (error) |
| goto Restore; |
| |
| ksys_sync_helper(); |
| |
| error = freeze_processes(); |
| if (error) |
| goto Exit; |
| |
| lock_device_hotplug(); |
| /* Allocate memory management structures */ |
| error = create_basic_memory_bitmaps(); |
| if (error) |
| goto Thaw; |
| |
| error = hibernation_snapshot(hibernation_mode == HIBERNATION_PLATFORM); |
| if (error || freezer_test_done) |
| goto Free_bitmaps; |
| |
| if (in_suspend) { |
| unsigned int flags = 0; |
| |
| if (hibernation_mode == HIBERNATION_PLATFORM) |
| flags |= SF_PLATFORM_MODE; |
| if (nocompress) |
| flags |= SF_NOCOMPRESS_MODE; |
| else |
| flags |= SF_CRC32_MODE; |
| |
| pm_pr_dbg("Writing hibernation image.\n"); |
| error = swsusp_write(flags); |
| swsusp_free(); |
| if (!error) { |
| if (hibernation_mode == HIBERNATION_TEST_RESUME) |
| snapshot_test = true; |
| else |
| power_down(); |
| } |
| in_suspend = 0; |
| pm_restore_gfp_mask(); |
| } else { |
| pm_pr_dbg("Hibernation image restored successfully.\n"); |
| } |
| |
| Free_bitmaps: |
| free_basic_memory_bitmaps(); |
| Thaw: |
| unlock_device_hotplug(); |
| if (snapshot_test) { |
| pm_pr_dbg("Checking hibernation image\n"); |
| error = swsusp_check(); |
| if (!error) |
| error = load_image_and_restore(); |
| } |
| thaw_processes(); |
| |
| /* Don't bother checking whether freezer_test_done is true */ |
| freezer_test_done = false; |
| Exit: |
| pm_notifier_call_chain(PM_POST_HIBERNATION); |
| Restore: |
| pm_restore_console(); |
| hibernate_release(); |
| Unlock: |
| unlock_system_sleep(); |
| pr_info("hibernation exit\n"); |
| |
| return error; |
| } |
| |
| /** |
| * hibernate_quiet_exec - Execute a function with all devices frozen. |
| * @func: Function to execute. |
| * @data: Data pointer to pass to @func. |
| * |
| * Return the @func return value or an error code if it cannot be executed. |
| */ |
| int hibernate_quiet_exec(int (*func)(void *data), void *data) |
| { |
| int error; |
| |
| lock_system_sleep(); |
| |
| if (!hibernate_acquire()) { |
| error = -EBUSY; |
| goto unlock; |
| } |
| |
| pm_prepare_console(); |
| |
| error = pm_notifier_call_chain_robust(PM_HIBERNATION_PREPARE, PM_POST_HIBERNATION); |
| if (error) |
| goto restore; |
| |
| error = freeze_processes(); |
| if (error) |
| goto exit; |
| |
| lock_device_hotplug(); |
| |
| pm_suspend_clear_flags(); |
| |
| error = platform_begin(true); |
| if (error) |
| goto thaw; |
| |
| error = freeze_kernel_threads(); |
| if (error) |
| goto thaw; |
| |
| error = dpm_prepare(PMSG_FREEZE); |
| if (error) |
| goto dpm_complete; |
| |
| suspend_console(); |
| |
| error = dpm_suspend(PMSG_FREEZE); |
| if (error) |
| goto dpm_resume; |
| |
| error = dpm_suspend_end(PMSG_FREEZE); |
| if (error) |
| goto dpm_resume; |
| |
| error = platform_pre_snapshot(true); |
| if (error) |
| goto skip; |
| |
| error = func(data); |
| |
| skip: |
| platform_finish(true); |
| |
| dpm_resume_start(PMSG_THAW); |
| |
| dpm_resume: |
| dpm_resume(PMSG_THAW); |
| |
| resume_console(); |
| |
| dpm_complete: |
| dpm_complete(PMSG_THAW); |
| |
| thaw_kernel_threads(); |
| |
| thaw: |
| platform_end(true); |
| |
| unlock_device_hotplug(); |
| |
| thaw_processes(); |
| |
| exit: |
| pm_notifier_call_chain(PM_POST_HIBERNATION); |
| |
| restore: |
| pm_restore_console(); |
| |
| hibernate_release(); |
| |
| unlock: |
| unlock_system_sleep(); |
| |
| return error; |
| } |
| EXPORT_SYMBOL_GPL(hibernate_quiet_exec); |
| |
| /** |
| * software_resume - Resume from a saved hibernation image. |
| * |
| * This routine is called as a late initcall, when all devices have been |
| * discovered and initialized already. |
| * |
| * The image reading code is called to see if there is a hibernation image |
| * available for reading. If that is the case, devices are quiesced and the |
| * contents of memory is restored from the saved image. |
| * |
| * If this is successful, control reappears in the restored target kernel in |
| * hibernation_snapshot() which returns to hibernate(). Otherwise, the routine |
| * attempts to recover gracefully and make the kernel return to the normal mode |
| * of operation. |
| */ |
| static int software_resume(void) |
| { |
| int error; |
| |
| /* |
| * If the user said "noresume".. bail out early. |
| */ |
| if (noresume || !hibernation_available()) |
| return 0; |
| |
| /* |
| * name_to_dev_t() below takes a sysfs buffer mutex when sysfs |
| * is configured into the kernel. Since the regular hibernate |
| * trigger path is via sysfs which takes a buffer mutex before |
| * calling hibernate functions (which take system_transition_mutex) |
| * this can cause lockdep to complain about a possible ABBA deadlock |
| * which cannot happen since we're in the boot code here and |
| * sysfs can't be invoked yet. Therefore, we use a subclass |
| * here to avoid lockdep complaining. |
| */ |
| mutex_lock_nested(&system_transition_mutex, SINGLE_DEPTH_NESTING); |
| |
| if (swsusp_resume_device) |
| goto Check_image; |
| |
| if (!strlen(resume_file)) { |
| error = -ENOENT; |
| goto Unlock; |
| } |
| |
| pm_pr_dbg("Checking hibernation image partition %s\n", resume_file); |
| |
| if (resume_delay) { |
| pr_info("Waiting %dsec before reading resume device ...\n", |
| resume_delay); |
| ssleep(resume_delay); |
| } |
| |
| /* Check if the device is there */ |
| swsusp_resume_device = name_to_dev_t(resume_file); |
| if (!swsusp_resume_device) { |
| /* |
| * Some device discovery might still be in progress; we need |
| * to wait for this to finish. |
| */ |
| wait_for_device_probe(); |
| |
| if (resume_wait) { |
| while ((swsusp_resume_device = name_to_dev_t(resume_file)) == 0) |
| msleep(10); |
| async_synchronize_full(); |
| } |
| |
| swsusp_resume_device = name_to_dev_t(resume_file); |
| if (!swsusp_resume_device) { |
| error = -ENODEV; |
| goto Unlock; |
| } |
| } |
| |
| Check_image: |
| pm_pr_dbg("Hibernation image partition %d:%d present\n", |
| MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device)); |
| |
| pm_pr_dbg("Looking for hibernation image.\n"); |
| error = swsusp_check(); |
| if (error) |
| goto Unlock; |
| |
| /* The snapshot device should not be opened while we're running */ |
| if (!hibernate_acquire()) { |
| error = -EBUSY; |
| swsusp_close(FMODE_READ | FMODE_EXCL); |
| goto Unlock; |
| } |
| |
| pr_info("resume from hibernation\n"); |
| pm_prepare_console(); |
| error = pm_notifier_call_chain_robust(PM_RESTORE_PREPARE, PM_POST_RESTORE); |
| if (error) |
| goto Restore; |
| |
| pm_pr_dbg("Preparing processes for hibernation restore.\n"); |
| error = freeze_processes(); |
| if (error) |
| goto Close_Finish; |
| |
| error = freeze_kernel_threads(); |
| if (error) { |
| thaw_processes(); |
| goto Close_Finish; |
| } |
| |
| error = load_image_and_restore(); |
| thaw_processes(); |
| Finish: |
| pm_notifier_call_chain(PM_POST_RESTORE); |
| Restore: |
| pm_restore_console(); |
| pr_info("resume failed (%d)\n", error); |
| hibernate_release(); |
| /* For success case, the suspend path will release the lock */ |
| Unlock: |
| mutex_unlock(&system_transition_mutex); |
| pm_pr_dbg("Hibernation image not present or could not be loaded.\n"); |
| return error; |
| Close_Finish: |
| swsusp_close(FMODE_READ | FMODE_EXCL); |
| goto Finish; |
| } |
| |
| late_initcall_sync(software_resume); |
| |
| |
| static const char * const hibernation_modes[] = { |
| [HIBERNATION_PLATFORM] = "platform", |
| [HIBERNATION_SHUTDOWN] = "shutdown", |
| [HIBERNATION_REBOOT] = "reboot", |
| #ifdef CONFIG_SUSPEND |
| [HIBERNATION_SUSPEND] = "suspend", |
| #endif |
| [HIBERNATION_TEST_RESUME] = "test_resume", |
| }; |
| |
| /* |
| * /sys/power/disk - Control hibernation mode. |
| * |
| * Hibernation can be handled in several ways. There are a few different ways |
| * to put the system into the sleep state: using the platform driver (e.g. ACPI |
| * or other hibernation_ops), powering it off or rebooting it (for testing |
| * mostly). |
| * |
| * The sysfs file /sys/power/disk provides an interface for selecting the |
| * hibernation mode to use. Reading from this file causes the available modes |
| * to be printed. There are 3 modes that can be supported: |
| * |
| * 'platform' |
| * 'shutdown' |
| * 'reboot' |
| * |
| * If a platform hibernation driver is in use, 'platform' will be supported |
| * and will be used by default. Otherwise, 'shutdown' will be used by default. |
| * The selected option (i.e. the one corresponding to the current value of |
| * hibernation_mode) is enclosed by a square bracket. |
| * |
| * To select a given hibernation mode it is necessary to write the mode's |
| * string representation (as returned by reading from /sys/power/disk) back |
| * into /sys/power/disk. |
| */ |
| |
| static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr, |
| char *buf) |
| { |
| int i; |
| char *start = buf; |
| |
| if (!hibernation_available()) |
| return sprintf(buf, "[disabled]\n"); |
| |
| for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) { |
| if (!hibernation_modes[i]) |
| continue; |
| switch (i) { |
| case HIBERNATION_SHUTDOWN: |
| case HIBERNATION_REBOOT: |
| #ifdef CONFIG_SUSPEND |
| case HIBERNATION_SUSPEND: |
| #endif |
| case HIBERNATION_TEST_RESUME: |
| break; |
| case HIBERNATION_PLATFORM: |
| if (hibernation_ops) |
| break; |
| /* not a valid mode, continue with loop */ |
| continue; |
| } |
| if (i == hibernation_mode) |
| buf += sprintf(buf, "[%s] ", hibernation_modes[i]); |
| else |
| buf += sprintf(buf, "%s ", hibernation_modes[i]); |
| } |
| buf += sprintf(buf, "\n"); |
| return buf-start; |
| } |
| |
| static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr, |
| const char *buf, size_t n) |
| { |
| int error = 0; |
| int i; |
| int len; |
| char *p; |
| int mode = HIBERNATION_INVALID; |
| |
| if (!hibernation_available()) |
| return -EPERM; |
| |
| p = memchr(buf, '\n', n); |
| len = p ? p - buf : n; |
| |
| lock_system_sleep(); |
| for (i = HIBERNATION_FIRST; i <= HIBERNATION_MAX; i++) { |
| if (len == strlen(hibernation_modes[i]) |
| && !strncmp(buf, hibernation_modes[i], len)) { |
| mode = i; |
| break; |
| } |
| } |
| if (mode != HIBERNATION_INVALID) { |
| switch (mode) { |
| case HIBERNATION_SHUTDOWN: |
| case HIBERNATION_REBOOT: |
| #ifdef CONFIG_SUSPEND |
| case HIBERNATION_SUSPEND: |
| #endif |
| case HIBERNATION_TEST_RESUME: |
| hibernation_mode = mode; |
| break; |
| case HIBERNATION_PLATFORM: |
| if (hibernation_ops) |
| hibernation_mode = mode; |
| else |
| error = -EINVAL; |
| } |
| } else |
| error = -EINVAL; |
| |
| if (!error) |
| pm_pr_dbg("Hibernation mode set to '%s'\n", |
| hibernation_modes[mode]); |
| unlock_system_sleep(); |
| return error ? error : n; |
| } |
| |
| power_attr(disk); |
| |
| static ssize_t resume_show(struct kobject *kobj, struct kobj_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%d:%d\n", MAJOR(swsusp_resume_device), |
| MINOR(swsusp_resume_device)); |
| } |
| |
| static ssize_t resume_store(struct kobject *kobj, struct kobj_attribute *attr, |
| const char *buf, size_t n) |
| { |
| dev_t res; |
| int len = n; |
| char *name; |
| |
| if (len && buf[len-1] == '\n') |
| len--; |
| name = kstrndup(buf, len, GFP_KERNEL); |
| if (!name) |
| return -ENOMEM; |
| |
| res = name_to_dev_t(name); |
| kfree(name); |
| if (!res) |
| return -EINVAL; |
| |
| lock_system_sleep(); |
| swsusp_resume_device = res; |
| unlock_system_sleep(); |
| pm_pr_dbg("Configured hibernation resume from disk to %u\n", |
| swsusp_resume_device); |
| noresume = 0; |
| software_resume(); |
| return n; |
| } |
| |
| power_attr(resume); |
| |
| static ssize_t resume_offset_show(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%llu\n", (unsigned long long)swsusp_resume_block); |
| } |
| |
| static ssize_t resume_offset_store(struct kobject *kobj, |
| struct kobj_attribute *attr, const char *buf, |
| size_t n) |
| { |
| unsigned long long offset; |
| int rc; |
| |
| rc = kstrtoull(buf, 0, &offset); |
| if (rc) |
| return rc; |
| swsusp_resume_block = offset; |
| |
| return n; |
| } |
| |
| power_attr(resume_offset); |
| |
| static ssize_t image_size_show(struct kobject *kobj, struct kobj_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%lu\n", image_size); |
| } |
| |
| static ssize_t image_size_store(struct kobject *kobj, struct kobj_attribute *attr, |
| const char *buf, size_t n) |
| { |
| unsigned long size; |
| |
| if (sscanf(buf, "%lu", &size) == 1) { |
| image_size = size; |
| return n; |
| } |
| |
| return -EINVAL; |
| } |
| |
| power_attr(image_size); |
| |
| static ssize_t reserved_size_show(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%lu\n", reserved_size); |
| } |
| |
| static ssize_t reserved_size_store(struct kobject *kobj, |
| struct kobj_attribute *attr, |
| const char *buf, size_t n) |
| { |
| unsigned long size; |
| |
| if (sscanf(buf, "%lu", &size) == 1) { |
| reserved_size = size; |
| return n; |
| } |
| |
| return -EINVAL; |
| } |
| |
| power_attr(reserved_size); |
| |
| static struct attribute *g[] = { |
| &disk_attr.attr, |
| &resume_offset_attr.attr, |
| &resume_attr.attr, |
| &image_size_attr.attr, |
| &reserved_size_attr.attr, |
| NULL, |
| }; |
| |
| |
| static const struct attribute_group attr_group = { |
| .attrs = g, |
| }; |
| |
| |
| static int __init pm_disk_init(void) |
| { |
| return sysfs_create_group(power_kobj, &attr_group); |
| } |
| |
| core_initcall(pm_disk_init); |
| |
| |
| static int __init resume_setup(char *str) |
| { |
| if (noresume) |
| return 1; |
| |
| strncpy(resume_file, str, 255); |
| return 1; |
| } |
| |
| static int __init resume_offset_setup(char *str) |
| { |
| unsigned long long offset; |
| |
| if (noresume) |
| return 1; |
| |
| if (sscanf(str, "%llu", &offset) == 1) |
| swsusp_resume_block = offset; |
| |
| return 1; |
| } |
| |
| static int __init hibernate_setup(char *str) |
| { |
| if (!strncmp(str, "noresume", 8)) { |
| noresume = 1; |
| } else if (!strncmp(str, "nocompress", 10)) { |
| nocompress = 1; |
| } else if (!strncmp(str, "no", 2)) { |
| noresume = 1; |
| nohibernate = 1; |
| } else if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX) |
| && !strncmp(str, "protect_image", 13)) { |
| enable_restore_image_protection(); |
| } |
| return 1; |
| } |
| |
| static int __init noresume_setup(char *str) |
| { |
| noresume = 1; |
| return 1; |
| } |
| |
| static int __init resumewait_setup(char *str) |
| { |
| resume_wait = 1; |
| return 1; |
| } |
| |
| static int __init resumedelay_setup(char *str) |
| { |
| int rc = kstrtouint(str, 0, &resume_delay); |
| |
| if (rc) |
| return rc; |
| return 1; |
| } |
| |
| static int __init nohibernate_setup(char *str) |
| { |
| noresume = 1; |
| nohibernate = 1; |
| return 1; |
| } |
| |
| __setup("noresume", noresume_setup); |
| __setup("resume_offset=", resume_offset_setup); |
| __setup("resume=", resume_setup); |
| __setup("hibernate=", hibernate_setup); |
| __setup("resumewait", resumewait_setup); |
| __setup("resumedelay=", resumedelay_setup); |
| __setup("nohibernate", nohibernate_setup); |