| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/sched.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_device.h> |
| |
| #include "usb.h" |
| #include "scsiglue.h" |
| #include "transport.h" |
| |
| /* |
| * MS_SCSI_Test_Unit_Ready() |
| */ |
| int MS_SCSI_Test_Unit_Ready(struct us_data *us, struct scsi_cmnd *srb) |
| { |
| /* pr_info("MS_SCSI_Test_Unit_Ready\n"); */ |
| if (us->MS_Status.Insert && us->MS_Status.Ready) |
| return USB_STOR_TRANSPORT_GOOD; |
| else { |
| ENE_MSInit(us); |
| return USB_STOR_TRANSPORT_GOOD; |
| } |
| |
| return USB_STOR_TRANSPORT_GOOD; |
| } |
| |
| /* |
| * MS_SCSI_Inquiry() |
| */ |
| int MS_SCSI_Inquiry(struct us_data *us, struct scsi_cmnd *srb) |
| { |
| /* pr_info("MS_SCSI_Inquiry\n"); */ |
| BYTE data_ptr[36] = {0x00, 0x80, 0x02, 0x00, 0x1F, 0x00, |
| 0x00, 0x00, 0x55, 0x53, 0x42, 0x32, |
| 0x2E, 0x30, 0x20, 0x20, 0x43, 0x61, |
| 0x72, 0x64, 0x52, 0x65, 0x61, 0x64, |
| 0x65, 0x72, 0x20, 0x20, 0x20, 0x20, |
| 0x20, 0x20, 0x30, 0x31, 0x30, 0x30}; |
| |
| usb_stor_set_xfer_buf(us, data_ptr, 36, srb, TO_XFER_BUF); |
| return USB_STOR_TRANSPORT_GOOD; |
| } |
| |
| /* |
| * MS_SCSI_Mode_Sense() |
| */ |
| int MS_SCSI_Mode_Sense(struct us_data *us, struct scsi_cmnd *srb) |
| { |
| BYTE mediaNoWP[12] = {0x0b, 0x00, 0x00, 0x08, 0x00, 0x00, |
| 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00}; |
| BYTE mediaWP[12] = {0x0b, 0x00, 0x80, 0x08, 0x00, 0x00, |
| 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00}; |
| |
| if (us->MS_Status.WtP) |
| usb_stor_set_xfer_buf(us, mediaWP, 12, srb, TO_XFER_BUF); |
| else |
| usb_stor_set_xfer_buf(us, mediaNoWP, 12, srb, TO_XFER_BUF); |
| |
| |
| return USB_STOR_TRANSPORT_GOOD; |
| } |
| |
| /* |
| * MS_SCSI_Read_Capacity() |
| */ |
| int MS_SCSI_Read_Capacity(struct us_data *us, struct scsi_cmnd *srb) |
| { |
| unsigned int offset = 0; |
| struct scatterlist *sg = NULL; |
| DWORD bl_num; |
| WORD bl_len; |
| BYTE buf[8]; |
| |
| pr_info("MS_SCSI_Read_Capacity\n"); |
| |
| bl_len = 0x200; |
| if (us->MS_Status.IsMSPro) |
| bl_num = us->MSP_TotalBlock - 1; |
| else |
| bl_num = us->MS_Lib.NumberOfLogBlock * |
| us->MS_Lib.blockSize * 2 - 1; |
| |
| us->bl_num = bl_num; |
| pr_info("bl_len = %x\n", bl_len); |
| pr_info("bl_num = %x\n", bl_num); |
| |
| /* srb->request_bufflen = 8; */ |
| buf[0] = (bl_num >> 24) & 0xff; |
| buf[1] = (bl_num >> 16) & 0xff; |
| buf[2] = (bl_num >> 8) & 0xff; |
| buf[3] = (bl_num >> 0) & 0xff; |
| buf[4] = (bl_len >> 24) & 0xff; |
| buf[5] = (bl_len >> 16) & 0xff; |
| buf[6] = (bl_len >> 8) & 0xff; |
| buf[7] = (bl_len >> 0) & 0xff; |
| |
| usb_stor_access_xfer_buf(us, buf, 8, srb, &sg, &offset, TO_XFER_BUF); |
| /* usb_stor_set_xfer_buf(us, buf, srb->request_bufflen, |
| srb, TO_XFER_BUF); */ |
| |
| return USB_STOR_TRANSPORT_GOOD; |
| } |
| |
| /* |
| * MS_SCSI_Read() |
| */ |
| int MS_SCSI_Read(struct us_data *us, struct scsi_cmnd *srb) |
| { |
| struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; |
| int result = 0; |
| PBYTE Cdb = srb->cmnd; |
| DWORD bn = ((Cdb[2] << 24) & 0xff000000) | |
| ((Cdb[3] << 16) & 0x00ff0000) | |
| ((Cdb[4] << 8) & 0x0000ff00) | |
| ((Cdb[5] << 0) & 0x000000ff); |
| WORD blen = ((Cdb[7] << 8) & 0xff00) | ((Cdb[8] << 0) & 0x00ff); |
| DWORD blenByte = blen * 0x200; |
| |
| /* pr_info("SCSIOP_READ --- bn = %X, blen = %X, srb->use_sg = %X\n", |
| bn, blen, srb->use_sg); */ |
| |
| if (bn > us->bl_num) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| if (us->MS_Status.IsMSPro) { |
| result = ENE_LoadBinCode(us, MSP_RW_PATTERN); |
| if (result != USB_STOR_XFER_GOOD) { |
| pr_info("Load MSP RW pattern Fail !!\n"); |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| /* set up the command wrapper */ |
| memset(bcb, 0, sizeof(struct bulk_cb_wrap)); |
| bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| bcb->DataTransferLength = blenByte; |
| bcb->Flags = 0x80; |
| bcb->CDB[0] = 0xF1; |
| bcb->CDB[1] = 0x02; |
| bcb->CDB[5] = (BYTE)(bn); |
| bcb->CDB[4] = (BYTE)(bn>>8); |
| bcb->CDB[3] = (BYTE)(bn>>16); |
| bcb->CDB[2] = (BYTE)(bn>>24); |
| |
| result = ENE_SendScsiCmd(us, FDIR_READ, scsi_sglist(srb), 1); |
| } else { |
| void *buf; |
| int offset = 0; |
| WORD phyblk, logblk; |
| BYTE PageNum; |
| WORD len; |
| DWORD blkno; |
| |
| buf = kmalloc(blenByte, GFP_KERNEL); |
| if (buf == NULL) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| result = ENE_LoadBinCode(us, MS_RW_PATTERN); |
| if (result != USB_STOR_XFER_GOOD) { |
| pr_info("Load MS RW pattern Fail !!\n"); |
| result = USB_STOR_TRANSPORT_ERROR; |
| goto exit; |
| } |
| |
| logblk = (WORD)(bn / us->MS_Lib.PagesPerBlock); |
| PageNum = (BYTE)(bn % us->MS_Lib.PagesPerBlock); |
| |
| while (1) { |
| if (blen > (us->MS_Lib.PagesPerBlock-PageNum)) |
| len = us->MS_Lib.PagesPerBlock-PageNum; |
| else |
| len = blen; |
| |
| phyblk = MS_LibConv2Physical(us, logblk); |
| blkno = phyblk * 0x20 + PageNum; |
| |
| /* set up the command wrapper */ |
| memset(bcb, 0, sizeof(struct bulk_cb_wrap)); |
| bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| bcb->DataTransferLength = 0x200 * len; |
| bcb->Flags = 0x80; |
| bcb->CDB[0] = 0xF1; |
| bcb->CDB[1] = 0x02; |
| bcb->CDB[5] = (BYTE)(blkno); |
| bcb->CDB[4] = (BYTE)(blkno>>8); |
| bcb->CDB[3] = (BYTE)(blkno>>16); |
| bcb->CDB[2] = (BYTE)(blkno>>24); |
| |
| result = ENE_SendScsiCmd(us, FDIR_READ, buf+offset, 0); |
| if (result != USB_STOR_XFER_GOOD) { |
| pr_info("MS_SCSI_Read --- result = %x\n", |
| result); |
| result = USB_STOR_TRANSPORT_ERROR; |
| goto exit; |
| } |
| |
| blen -= len; |
| if (blen <= 0) |
| break; |
| logblk++; |
| PageNum = 0; |
| offset += MS_BYTES_PER_PAGE*len; |
| } |
| usb_stor_set_xfer_buf(us, buf, blenByte, srb, TO_XFER_BUF); |
| exit: |
| kfree(buf); |
| } |
| return result; |
| } |
| |
| /* |
| * MS_SCSI_Write() |
| */ |
| int MS_SCSI_Write(struct us_data *us, struct scsi_cmnd *srb) |
| { |
| struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; |
| int result = 0; |
| PBYTE Cdb = srb->cmnd; |
| DWORD bn = ((Cdb[2] << 24) & 0xff000000) | |
| ((Cdb[3] << 16) & 0x00ff0000) | |
| ((Cdb[4] << 8) & 0x0000ff00) | |
| ((Cdb[5] << 0) & 0x000000ff); |
| WORD blen = ((Cdb[7] << 8) & 0xff00) | ((Cdb[8] << 0) & 0x00ff); |
| DWORD blenByte = blen * 0x200; |
| |
| if (bn > us->bl_num) |
| return USB_STOR_TRANSPORT_ERROR; |
| |
| if (us->MS_Status.IsMSPro) { |
| result = ENE_LoadBinCode(us, MSP_RW_PATTERN); |
| if (result != USB_STOR_XFER_GOOD) { |
| pr_info("Load MSP RW pattern Fail !!\n"); |
| return USB_STOR_TRANSPORT_ERROR; |
| } |
| |
| /* set up the command wrapper */ |
| memset(bcb, 0, sizeof(struct bulk_cb_wrap)); |
| bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); |
| bcb->DataTransferLength = blenByte; |
| bcb->Flags = 0x00; |
| bcb->CDB[0] = 0xF0; |
| bcb->CDB[1] = 0x04; |
| bcb->CDB[5] = (BYTE)(bn); |
| bcb->CDB[4] = (BYTE)(bn>>8); |
| bcb->CDB[3] = (BYTE)(bn>>16); |
| bcb->CDB[2] = (BYTE)(bn>>24); |
| |
| result = ENE_SendScsiCmd(us, FDIR_WRITE, scsi_sglist(srb), 1); |
| } else { |
| void *buf; |
| int offset = 0; |
| WORD PhyBlockAddr; |
| BYTE PageNum; |
| DWORD result; |
| WORD len, oldphy, newphy; |
| |
| buf = kmalloc(blenByte, GFP_KERNEL); |
| if (buf == NULL) |
| return USB_STOR_TRANSPORT_ERROR; |
| usb_stor_set_xfer_buf(us, buf, blenByte, srb, FROM_XFER_BUF); |
| |
| result = ENE_LoadBinCode(us, MS_RW_PATTERN); |
| if (result != USB_STOR_XFER_GOOD) { |
| pr_info("Load MS RW pattern Fail !!\n"); |
| result = USB_STOR_TRANSPORT_ERROR; |
| goto exit; |
| } |
| |
| PhyBlockAddr = (WORD)(bn / us->MS_Lib.PagesPerBlock); |
| PageNum = (BYTE)(bn % us->MS_Lib.PagesPerBlock); |
| |
| while (1) { |
| if (blen > (us->MS_Lib.PagesPerBlock-PageNum)) |
| len = us->MS_Lib.PagesPerBlock-PageNum; |
| else |
| len = blen; |
| |
| oldphy = MS_LibConv2Physical(us, PhyBlockAddr); |
| newphy = MS_LibSearchBlockFromLogical(us, PhyBlockAddr); |
| |
| result = MS_ReaderCopyBlock(us, oldphy, newphy, |
| PhyBlockAddr, PageNum, |
| buf+offset, len); |
| if (result != USB_STOR_XFER_GOOD) { |
| pr_info("MS_SCSI_Write --- result = %x\n", |
| result); |
| result = USB_STOR_TRANSPORT_ERROR; |
| goto exit; |
| } |
| |
| us->MS_Lib.Phy2LogMap[oldphy] = MS_LB_NOT_USED_ERASED; |
| MS_LibForceSetLogicalPair(us, PhyBlockAddr, newphy); |
| |
| blen -= len; |
| if (blen <= 0) |
| break; |
| PhyBlockAddr++; |
| PageNum = 0; |
| offset += MS_BYTES_PER_PAGE*len; |
| } |
| exit: |
| kfree(buf); |
| } |
| return result; |
| } |
| |
| /* |
| * MS_SCSIIrp() |
| */ |
| int MS_SCSIIrp(struct us_data *us, struct scsi_cmnd *srb) |
| { |
| int result; |
| |
| us->SrbStatus = SS_SUCCESS; |
| switch (srb->cmnd[0]) { |
| case TEST_UNIT_READY: |
| result = MS_SCSI_Test_Unit_Ready(us, srb); |
| break; /* 0x00 */ |
| case INQUIRY: |
| result = MS_SCSI_Inquiry(us, srb); |
| break; /* 0x12 */ |
| case MODE_SENSE: |
| result = MS_SCSI_Mode_Sense(us, srb); |
| break; /* 0x1A */ |
| case READ_CAPACITY: |
| result = MS_SCSI_Read_Capacity(us, srb); |
| break; /* 0x25 */ |
| case READ_10: |
| result = MS_SCSI_Read(us, srb); |
| break; /* 0x28 */ |
| case WRITE_10: |
| result = MS_SCSI_Write(us, srb); |
| break; /* 0x2A */ |
| default: |
| us->SrbStatus = SS_ILLEGAL_REQUEST; |
| result = USB_STOR_TRANSPORT_FAILED; |
| break; |
| } |
| return result; |
| } |
| |