| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Dynamic byte queue limits. See include/linux/dynamic_queue_limits.h |
| * |
| * Copyright (c) 2011, Tom Herbert <therbert@google.com> |
| */ |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/jiffies.h> |
| #include <linux/dynamic_queue_limits.h> |
| #include <linux/compiler.h> |
| #include <linux/export.h> |
| |
| #define POSDIFF(A, B) ((int)((A) - (B)) > 0 ? (A) - (B) : 0) |
| #define AFTER_EQ(A, B) ((int)((A) - (B)) >= 0) |
| |
| /* Records completed count and recalculates the queue limit */ |
| void dql_completed(struct dql *dql, unsigned int count) |
| { |
| unsigned int inprogress, prev_inprogress, limit; |
| unsigned int ovlimit, completed, num_queued; |
| bool all_prev_completed; |
| |
| num_queued = READ_ONCE(dql->num_queued); |
| |
| /* Can't complete more than what's in queue */ |
| BUG_ON(count > num_queued - dql->num_completed); |
| |
| completed = dql->num_completed + count; |
| limit = dql->limit; |
| ovlimit = POSDIFF(num_queued - dql->num_completed, limit); |
| inprogress = num_queued - completed; |
| prev_inprogress = dql->prev_num_queued - dql->num_completed; |
| all_prev_completed = AFTER_EQ(completed, dql->prev_num_queued); |
| |
| if ((ovlimit && !inprogress) || |
| (dql->prev_ovlimit && all_prev_completed)) { |
| /* |
| * Queue considered starved if: |
| * - The queue was over-limit in the last interval, |
| * and there is no more data in the queue. |
| * OR |
| * - The queue was over-limit in the previous interval and |
| * when enqueuing it was possible that all queued data |
| * had been consumed. This covers the case when queue |
| * may have becomes starved between completion processing |
| * running and next time enqueue was scheduled. |
| * |
| * When queue is starved increase the limit by the amount |
| * of bytes both sent and completed in the last interval, |
| * plus any previous over-limit. |
| */ |
| limit += POSDIFF(completed, dql->prev_num_queued) + |
| dql->prev_ovlimit; |
| dql->slack_start_time = jiffies; |
| dql->lowest_slack = UINT_MAX; |
| } else if (inprogress && prev_inprogress && !all_prev_completed) { |
| /* |
| * Queue was not starved, check if the limit can be decreased. |
| * A decrease is only considered if the queue has been busy in |
| * the whole interval (the check above). |
| * |
| * If there is slack, the amount of execess data queued above |
| * the the amount needed to prevent starvation, the queue limit |
| * can be decreased. To avoid hysteresis we consider the |
| * minimum amount of slack found over several iterations of the |
| * completion routine. |
| */ |
| unsigned int slack, slack_last_objs; |
| |
| /* |
| * Slack is the maximum of |
| * - The queue limit plus previous over-limit minus twice |
| * the number of objects completed. Note that two times |
| * number of completed bytes is a basis for an upper bound |
| * of the limit. |
| * - Portion of objects in the last queuing operation that |
| * was not part of non-zero previous over-limit. That is |
| * "round down" by non-overlimit portion of the last |
| * queueing operation. |
| */ |
| slack = POSDIFF(limit + dql->prev_ovlimit, |
| 2 * (completed - dql->num_completed)); |
| slack_last_objs = dql->prev_ovlimit ? |
| POSDIFF(dql->prev_last_obj_cnt, dql->prev_ovlimit) : 0; |
| |
| slack = max(slack, slack_last_objs); |
| |
| if (slack < dql->lowest_slack) |
| dql->lowest_slack = slack; |
| |
| if (time_after(jiffies, |
| dql->slack_start_time + dql->slack_hold_time)) { |
| limit = POSDIFF(limit, dql->lowest_slack); |
| dql->slack_start_time = jiffies; |
| dql->lowest_slack = UINT_MAX; |
| } |
| } |
| |
| /* Enforce bounds on limit */ |
| limit = clamp(limit, dql->min_limit, dql->max_limit); |
| |
| if (limit != dql->limit) { |
| dql->limit = limit; |
| ovlimit = 0; |
| } |
| |
| dql->adj_limit = limit + completed; |
| dql->prev_ovlimit = ovlimit; |
| dql->prev_last_obj_cnt = dql->last_obj_cnt; |
| dql->num_completed = completed; |
| dql->prev_num_queued = num_queued; |
| } |
| EXPORT_SYMBOL(dql_completed); |
| |
| void dql_reset(struct dql *dql) |
| { |
| /* Reset all dynamic values */ |
| dql->limit = 0; |
| dql->num_queued = 0; |
| dql->num_completed = 0; |
| dql->last_obj_cnt = 0; |
| dql->prev_num_queued = 0; |
| dql->prev_last_obj_cnt = 0; |
| dql->prev_ovlimit = 0; |
| dql->lowest_slack = UINT_MAX; |
| dql->slack_start_time = jiffies; |
| } |
| EXPORT_SYMBOL(dql_reset); |
| |
| void dql_init(struct dql *dql, unsigned int hold_time) |
| { |
| dql->max_limit = DQL_MAX_LIMIT; |
| dql->min_limit = 0; |
| dql->slack_hold_time = hold_time; |
| dql_reset(dql); |
| } |
| EXPORT_SYMBOL(dql_init); |