| # SPDX-License-Identifier: GPL-2.0 |
| # Intel pin control drivers |
| |
| if (X86 || COMPILE_TEST) |
| |
| config PINCTRL_BAYTRAIL |
| bool "Intel Baytrail GPIO pin control" |
| depends on ACPI |
| select GPIOLIB |
| select GPIOLIB_IRQCHIP |
| select PINMUX |
| select PINCONF |
| select GENERIC_PINCONF |
| help |
| driver for memory mapped GPIO functionality on Intel Baytrail |
| platforms. Supports 3 banks with 102, 28 and 44 gpios. |
| Most pins are usually muxed to some other functionality by firmware, |
| so only a small amount is available for gpio use. |
| |
| Requires ACPI device enumeration code to set up a platform device. |
| |
| config PINCTRL_CHERRYVIEW |
| tristate "Intel Cherryview/Braswell pinctrl and GPIO driver" |
| depends on ACPI |
| select PINMUX |
| select PINCONF |
| select GENERIC_PINCONF |
| select GPIOLIB |
| select GPIOLIB_IRQCHIP |
| help |
| Cherryview/Braswell pinctrl driver provides an interface that |
| allows configuring of SoC pins and using them as GPIOs. |
| |
| config PINCTRL_LYNXPOINT |
| tristate "Intel Lynxpoint pinctrl and GPIO driver" |
| depends on ACPI |
| select PINMUX |
| select PINCONF |
| select GENERIC_PINCONF |
| select GPIOLIB |
| select GPIOLIB_IRQCHIP |
| help |
| Lynxpoint is the PCH of Intel Haswell. This pinctrl driver |
| provides an interface that allows configuring of PCH pins and |
| using them as GPIOs. |
| |
| config PINCTRL_MERRIFIELD |
| tristate "Intel Merrifield pinctrl driver" |
| depends on X86_INTEL_MID |
| select PINMUX |
| select PINCONF |
| select GENERIC_PINCONF |
| help |
| Merrifield Family-Level Interface Shim (FLIS) driver provides an |
| interface that allows configuring of SoC pins and using them as |
| GPIOs. |
| |
| config PINCTRL_INTEL |
| tristate |
| select PINMUX |
| select PINCONF |
| select GENERIC_PINCONF |
| select GPIOLIB |
| select GPIOLIB_IRQCHIP |
| |
| config PINCTRL_BROXTON |
| tristate "Intel Broxton pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| Broxton pinctrl driver provides an interface that allows |
| configuring of SoC pins and using them as GPIOs. |
| |
| config PINCTRL_CANNONLAKE |
| tristate "Intel Cannon Lake PCH pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| This pinctrl driver provides an interface that allows configuring |
| of Intel Cannon Lake PCH pins and using them as GPIOs. |
| |
| config PINCTRL_CEDARFORK |
| tristate "Intel Cedar Fork pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| This pinctrl driver provides an interface that allows configuring |
| of Intel Cedar Fork PCH pins and using them as GPIOs. |
| |
| config PINCTRL_DENVERTON |
| tristate "Intel Denverton pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| This pinctrl driver provides an interface that allows configuring |
| of Intel Denverton SoC pins and using them as GPIOs. |
| |
| config PINCTRL_EMMITSBURG |
| tristate "Intel Emmitsburg pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| This pinctrl driver provides an interface that allows configuring |
| of Intel Emmitsburg pins and using them as GPIOs. |
| |
| config PINCTRL_GEMINILAKE |
| tristate "Intel Gemini Lake SoC pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| This pinctrl driver provides an interface that allows configuring |
| of Intel Gemini Lake SoC pins and using them as GPIOs. |
| |
| config PINCTRL_ICELAKE |
| tristate "Intel Ice Lake PCH pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| This pinctrl driver provides an interface that allows configuring |
| of Intel Ice Lake PCH pins and using them as GPIOs. |
| |
| config PINCTRL_JASPERLAKE |
| tristate "Intel Jasper Lake PCH pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| This pinctrl driver provides an interface that allows configuring |
| of Intel Jasper Lake PCH pins and using them as GPIOs. |
| |
| config PINCTRL_LEWISBURG |
| tristate "Intel Lewisburg pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| This pinctrl driver provides an interface that allows configuring |
| of Intel Lewisburg pins and using them as GPIOs. |
| |
| config PINCTRL_SUNRISEPOINT |
| tristate "Intel Sunrisepoint pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| Sunrisepoint is the PCH of Intel Skylake. This pinctrl driver |
| provides an interface that allows configuring of PCH pins and |
| using them as GPIOs. |
| |
| config PINCTRL_TIGERLAKE |
| tristate "Intel Tiger Lake pinctrl and GPIO driver" |
| depends on ACPI |
| select PINCTRL_INTEL |
| help |
| This pinctrl driver provides an interface that allows configuring |
| of Intel Tiger Lake PCH pins and using them as GPIOs. |
| endif |