| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * FPGA Manager Core |
| * |
| * Copyright (C) 2013-2015 Altera Corporation |
| * Copyright (C) 2017 Intel Corporation |
| * |
| * With code from the mailing list: |
| * Copyright (C) 2013 Xilinx, Inc. |
| */ |
| #include <linux/firmware.h> |
| #include <linux/fpga/fpga-mgr.h> |
| #include <linux/idr.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/mutex.h> |
| #include <linux/slab.h> |
| #include <linux/scatterlist.h> |
| #include <linux/highmem.h> |
| |
| static DEFINE_IDA(fpga_mgr_ida); |
| static struct class *fpga_mgr_class; |
| |
| struct fpga_mgr_devres { |
| struct fpga_manager *mgr; |
| }; |
| |
| static inline void fpga_mgr_fpga_remove(struct fpga_manager *mgr) |
| { |
| if (mgr->mops->fpga_remove) |
| mgr->mops->fpga_remove(mgr); |
| } |
| |
| static inline enum fpga_mgr_states fpga_mgr_state(struct fpga_manager *mgr) |
| { |
| if (mgr->mops->state) |
| return mgr->mops->state(mgr); |
| return FPGA_MGR_STATE_UNKNOWN; |
| } |
| |
| static inline u64 fpga_mgr_status(struct fpga_manager *mgr) |
| { |
| if (mgr->mops->status) |
| return mgr->mops->status(mgr); |
| return 0; |
| } |
| |
| static inline int fpga_mgr_write(struct fpga_manager *mgr, const char *buf, size_t count) |
| { |
| if (mgr->mops->write) |
| return mgr->mops->write(mgr, buf, count); |
| return -EOPNOTSUPP; |
| } |
| |
| /* |
| * After all the FPGA image has been written, do the device specific steps to |
| * finish and set the FPGA into operating mode. |
| */ |
| static inline int fpga_mgr_write_complete(struct fpga_manager *mgr, |
| struct fpga_image_info *info) |
| { |
| int ret = 0; |
| |
| mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE; |
| if (mgr->mops->write_complete) |
| ret = mgr->mops->write_complete(mgr, info); |
| if (ret) { |
| dev_err(&mgr->dev, "Error after writing image data to FPGA\n"); |
| mgr->state = FPGA_MGR_STATE_WRITE_COMPLETE_ERR; |
| return ret; |
| } |
| mgr->state = FPGA_MGR_STATE_OPERATING; |
| |
| return 0; |
| } |
| |
| static inline int fpga_mgr_parse_header(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| const char *buf, size_t count) |
| { |
| if (mgr->mops->parse_header) |
| return mgr->mops->parse_header(mgr, info, buf, count); |
| return 0; |
| } |
| |
| static inline int fpga_mgr_write_init(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| const char *buf, size_t count) |
| { |
| if (mgr->mops->write_init) |
| return mgr->mops->write_init(mgr, info, buf, count); |
| return 0; |
| } |
| |
| static inline int fpga_mgr_write_sg(struct fpga_manager *mgr, |
| struct sg_table *sgt) |
| { |
| if (mgr->mops->write_sg) |
| return mgr->mops->write_sg(mgr, sgt); |
| return -EOPNOTSUPP; |
| } |
| |
| /** |
| * fpga_image_info_alloc - Allocate an FPGA image info struct |
| * @dev: owning device |
| * |
| * Return: struct fpga_image_info or NULL |
| */ |
| struct fpga_image_info *fpga_image_info_alloc(struct device *dev) |
| { |
| struct fpga_image_info *info; |
| |
| get_device(dev); |
| |
| info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); |
| if (!info) { |
| put_device(dev); |
| return NULL; |
| } |
| |
| info->dev = dev; |
| |
| return info; |
| } |
| EXPORT_SYMBOL_GPL(fpga_image_info_alloc); |
| |
| /** |
| * fpga_image_info_free - Free an FPGA image info struct |
| * @info: FPGA image info struct to free |
| */ |
| void fpga_image_info_free(struct fpga_image_info *info) |
| { |
| struct device *dev; |
| |
| if (!info) |
| return; |
| |
| dev = info->dev; |
| if (info->firmware_name) |
| devm_kfree(dev, info->firmware_name); |
| |
| devm_kfree(dev, info); |
| put_device(dev); |
| } |
| EXPORT_SYMBOL_GPL(fpga_image_info_free); |
| |
| /* |
| * Call the low level driver's parse_header function with entire FPGA image |
| * buffer on the input. This will set info->header_size and info->data_size. |
| */ |
| static int fpga_mgr_parse_header_mapped(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| const char *buf, size_t count) |
| { |
| int ret; |
| |
| mgr->state = FPGA_MGR_STATE_PARSE_HEADER; |
| ret = fpga_mgr_parse_header(mgr, info, buf, count); |
| |
| if (info->header_size + info->data_size > count) { |
| dev_err(&mgr->dev, "Bitstream data outruns FPGA image\n"); |
| ret = -EINVAL; |
| } |
| |
| if (ret) { |
| dev_err(&mgr->dev, "Error while parsing FPGA image header\n"); |
| mgr->state = FPGA_MGR_STATE_PARSE_HEADER_ERR; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Call the low level driver's parse_header function with first fragment of |
| * scattered FPGA image on the input. If header fits first fragment, |
| * parse_header will set info->header_size and info->data_size. If it is not, |
| * parse_header will set desired size to info->header_size and -EAGAIN will be |
| * returned. |
| */ |
| static int fpga_mgr_parse_header_sg_first(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| struct sg_table *sgt) |
| { |
| struct sg_mapping_iter miter; |
| int ret; |
| |
| mgr->state = FPGA_MGR_STATE_PARSE_HEADER; |
| |
| sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG); |
| if (sg_miter_next(&miter) && |
| miter.length >= info->header_size) |
| ret = fpga_mgr_parse_header(mgr, info, miter.addr, miter.length); |
| else |
| ret = -EAGAIN; |
| sg_miter_stop(&miter); |
| |
| if (ret && ret != -EAGAIN) { |
| dev_err(&mgr->dev, "Error while parsing FPGA image header\n"); |
| mgr->state = FPGA_MGR_STATE_PARSE_HEADER_ERR; |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * Copy scattered FPGA image fragments to temporary buffer and call the |
| * low level driver's parse_header function. This should be called after |
| * fpga_mgr_parse_header_sg_first() returned -EAGAIN. In case of success, |
| * pointer to the newly allocated image header copy will be returned and |
| * its size will be set into *ret_size. Returned buffer needs to be freed. |
| */ |
| static void *fpga_mgr_parse_header_sg(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| struct sg_table *sgt, size_t *ret_size) |
| { |
| size_t len, new_header_size, header_size = 0; |
| char *new_buf, *buf = NULL; |
| int ret; |
| |
| do { |
| new_header_size = info->header_size; |
| if (new_header_size <= header_size) { |
| dev_err(&mgr->dev, "Requested invalid header size\n"); |
| ret = -EFAULT; |
| break; |
| } |
| |
| new_buf = krealloc(buf, new_header_size, GFP_KERNEL); |
| if (!new_buf) { |
| ret = -ENOMEM; |
| break; |
| } |
| |
| buf = new_buf; |
| |
| len = sg_pcopy_to_buffer(sgt->sgl, sgt->nents, |
| buf + header_size, |
| new_header_size - header_size, |
| header_size); |
| if (len != new_header_size - header_size) { |
| ret = -EFAULT; |
| break; |
| } |
| |
| header_size = new_header_size; |
| ret = fpga_mgr_parse_header(mgr, info, buf, header_size); |
| } while (ret == -EAGAIN); |
| |
| if (ret) { |
| dev_err(&mgr->dev, "Error while parsing FPGA image header\n"); |
| mgr->state = FPGA_MGR_STATE_PARSE_HEADER_ERR; |
| kfree(buf); |
| buf = ERR_PTR(ret); |
| } |
| |
| *ret_size = header_size; |
| |
| return buf; |
| } |
| |
| /* |
| * Call the low level driver's write_init function. This will do the |
| * device-specific things to get the FPGA into the state where it is ready to |
| * receive an FPGA image. The low level driver gets to see at least first |
| * info->header_size bytes in the buffer. If info->header_size is 0, |
| * write_init will not get any bytes of image buffer. |
| */ |
| static int fpga_mgr_write_init_buf(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| const char *buf, size_t count) |
| { |
| size_t header_size = info->header_size; |
| int ret; |
| |
| mgr->state = FPGA_MGR_STATE_WRITE_INIT; |
| |
| if (header_size > count) |
| ret = -EINVAL; |
| else if (!header_size) |
| ret = fpga_mgr_write_init(mgr, info, NULL, 0); |
| else |
| ret = fpga_mgr_write_init(mgr, info, buf, count); |
| |
| if (ret) { |
| dev_err(&mgr->dev, "Error preparing FPGA for writing\n"); |
| mgr->state = FPGA_MGR_STATE_WRITE_INIT_ERR; |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int fpga_mgr_prepare_sg(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| struct sg_table *sgt) |
| { |
| struct sg_mapping_iter miter; |
| size_t len; |
| char *buf; |
| int ret; |
| |
| /* Short path. Low level driver don't care about image header. */ |
| if (!mgr->mops->initial_header_size && !mgr->mops->parse_header) |
| return fpga_mgr_write_init_buf(mgr, info, NULL, 0); |
| |
| /* |
| * First try to use miter to map the first fragment to access the |
| * header, this is the typical path. |
| */ |
| ret = fpga_mgr_parse_header_sg_first(mgr, info, sgt); |
| /* If 0, header fits first fragment, call write_init on it */ |
| if (!ret) { |
| sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG); |
| if (sg_miter_next(&miter)) { |
| ret = fpga_mgr_write_init_buf(mgr, info, miter.addr, |
| miter.length); |
| sg_miter_stop(&miter); |
| return ret; |
| } |
| sg_miter_stop(&miter); |
| /* |
| * If -EAGAIN, more sg buffer is needed, |
| * otherwise an error has occurred. |
| */ |
| } else if (ret != -EAGAIN) { |
| return ret; |
| } |
| |
| /* |
| * Copy the fragments into temporary memory. |
| * Copying is done inside fpga_mgr_parse_header_sg(). |
| */ |
| buf = fpga_mgr_parse_header_sg(mgr, info, sgt, &len); |
| if (IS_ERR(buf)) |
| return PTR_ERR(buf); |
| |
| ret = fpga_mgr_write_init_buf(mgr, info, buf, len); |
| |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| /** |
| * fpga_mgr_buf_load_sg - load fpga from image in buffer from a scatter list |
| * @mgr: fpga manager |
| * @info: fpga image specific information |
| * @sgt: scatterlist table |
| * |
| * Step the low level fpga manager through the device-specific steps of getting |
| * an FPGA ready to be configured, writing the image to it, then doing whatever |
| * post-configuration steps necessary. This code assumes the caller got the |
| * mgr pointer from of_fpga_mgr_get() or fpga_mgr_get() and checked that it is |
| * not an error code. |
| * |
| * This is the preferred entry point for FPGA programming, it does not require |
| * any contiguous kernel memory. |
| * |
| * Return: 0 on success, negative error code otherwise. |
| */ |
| static int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| struct sg_table *sgt) |
| { |
| int ret; |
| |
| ret = fpga_mgr_prepare_sg(mgr, info, sgt); |
| if (ret) |
| return ret; |
| |
| /* Write the FPGA image to the FPGA. */ |
| mgr->state = FPGA_MGR_STATE_WRITE; |
| if (mgr->mops->write_sg) { |
| ret = fpga_mgr_write_sg(mgr, sgt); |
| } else { |
| size_t length, count = 0, data_size = info->data_size; |
| struct sg_mapping_iter miter; |
| |
| sg_miter_start(&miter, sgt->sgl, sgt->nents, SG_MITER_FROM_SG); |
| |
| if (mgr->mops->skip_header && |
| !sg_miter_skip(&miter, info->header_size)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| while (sg_miter_next(&miter)) { |
| if (data_size) |
| length = min(miter.length, data_size - count); |
| else |
| length = miter.length; |
| |
| ret = fpga_mgr_write(mgr, miter.addr, length); |
| if (ret) |
| break; |
| |
| count += length; |
| if (data_size && count >= data_size) |
| break; |
| } |
| sg_miter_stop(&miter); |
| } |
| |
| out: |
| if (ret) { |
| dev_err(&mgr->dev, "Error while writing image data to FPGA\n"); |
| mgr->state = FPGA_MGR_STATE_WRITE_ERR; |
| return ret; |
| } |
| |
| return fpga_mgr_write_complete(mgr, info); |
| } |
| |
| static int fpga_mgr_buf_load_mapped(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| const char *buf, size_t count) |
| { |
| int ret; |
| |
| ret = fpga_mgr_parse_header_mapped(mgr, info, buf, count); |
| if (ret) |
| return ret; |
| |
| ret = fpga_mgr_write_init_buf(mgr, info, buf, count); |
| if (ret) |
| return ret; |
| |
| if (mgr->mops->skip_header) { |
| buf += info->header_size; |
| count -= info->header_size; |
| } |
| |
| if (info->data_size) |
| count = info->data_size; |
| |
| /* |
| * Write the FPGA image to the FPGA. |
| */ |
| mgr->state = FPGA_MGR_STATE_WRITE; |
| ret = fpga_mgr_write(mgr, buf, count); |
| if (ret) { |
| dev_err(&mgr->dev, "Error while writing image data to FPGA\n"); |
| mgr->state = FPGA_MGR_STATE_WRITE_ERR; |
| return ret; |
| } |
| |
| return fpga_mgr_write_complete(mgr, info); |
| } |
| |
| /** |
| * fpga_mgr_buf_load - load fpga from image in buffer |
| * @mgr: fpga manager |
| * @info: fpga image info |
| * @buf: buffer contain fpga image |
| * @count: byte count of buf |
| * |
| * Step the low level fpga manager through the device-specific steps of getting |
| * an FPGA ready to be configured, writing the image to it, then doing whatever |
| * post-configuration steps necessary. This code assumes the caller got the |
| * mgr pointer from of_fpga_mgr_get() and checked that it is not an error code. |
| * |
| * Return: 0 on success, negative error code otherwise. |
| */ |
| static int fpga_mgr_buf_load(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| const char *buf, size_t count) |
| { |
| struct page **pages; |
| struct sg_table sgt; |
| const void *p; |
| int nr_pages; |
| int index; |
| int rc; |
| |
| /* |
| * This is just a fast path if the caller has already created a |
| * contiguous kernel buffer and the driver doesn't require SG, non-SG |
| * drivers will still work on the slow path. |
| */ |
| if (mgr->mops->write) |
| return fpga_mgr_buf_load_mapped(mgr, info, buf, count); |
| |
| /* |
| * Convert the linear kernel pointer into a sg_table of pages for use |
| * by the driver. |
| */ |
| nr_pages = DIV_ROUND_UP((unsigned long)buf + count, PAGE_SIZE) - |
| (unsigned long)buf / PAGE_SIZE; |
| pages = kmalloc_array(nr_pages, sizeof(struct page *), GFP_KERNEL); |
| if (!pages) |
| return -ENOMEM; |
| |
| p = buf - offset_in_page(buf); |
| for (index = 0; index < nr_pages; index++) { |
| if (is_vmalloc_addr(p)) |
| pages[index] = vmalloc_to_page(p); |
| else |
| pages[index] = kmap_to_page((void *)p); |
| if (!pages[index]) { |
| kfree(pages); |
| return -EFAULT; |
| } |
| p += PAGE_SIZE; |
| } |
| |
| /* |
| * The temporary pages list is used to code share the merging algorithm |
| * in sg_alloc_table_from_pages |
| */ |
| rc = sg_alloc_table_from_pages(&sgt, pages, index, offset_in_page(buf), |
| count, GFP_KERNEL); |
| kfree(pages); |
| if (rc) |
| return rc; |
| |
| rc = fpga_mgr_buf_load_sg(mgr, info, &sgt); |
| sg_free_table(&sgt); |
| |
| return rc; |
| } |
| |
| /** |
| * fpga_mgr_firmware_load - request firmware and load to fpga |
| * @mgr: fpga manager |
| * @info: fpga image specific information |
| * @image_name: name of image file on the firmware search path |
| * |
| * Request an FPGA image using the firmware class, then write out to the FPGA. |
| * Update the state before each step to provide info on what step failed if |
| * there is a failure. This code assumes the caller got the mgr pointer |
| * from of_fpga_mgr_get() or fpga_mgr_get() and checked that it is not an error |
| * code. |
| * |
| * Return: 0 on success, negative error code otherwise. |
| */ |
| static int fpga_mgr_firmware_load(struct fpga_manager *mgr, |
| struct fpga_image_info *info, |
| const char *image_name) |
| { |
| struct device *dev = &mgr->dev; |
| const struct firmware *fw; |
| int ret; |
| |
| dev_info(dev, "writing %s to %s\n", image_name, mgr->name); |
| |
| mgr->state = FPGA_MGR_STATE_FIRMWARE_REQ; |
| |
| ret = request_firmware(&fw, image_name, dev); |
| if (ret) { |
| mgr->state = FPGA_MGR_STATE_FIRMWARE_REQ_ERR; |
| dev_err(dev, "Error requesting firmware %s\n", image_name); |
| return ret; |
| } |
| |
| ret = fpga_mgr_buf_load(mgr, info, fw->data, fw->size); |
| |
| release_firmware(fw); |
| |
| return ret; |
| } |
| |
| /** |
| * fpga_mgr_load - load FPGA from scatter/gather table, buffer, or firmware |
| * @mgr: fpga manager |
| * @info: fpga image information. |
| * |
| * Load the FPGA from an image which is indicated in @info. If successful, the |
| * FPGA ends up in operating mode. |
| * |
| * Return: 0 on success, negative error code otherwise. |
| */ |
| int fpga_mgr_load(struct fpga_manager *mgr, struct fpga_image_info *info) |
| { |
| info->header_size = mgr->mops->initial_header_size; |
| |
| if (info->sgt) |
| return fpga_mgr_buf_load_sg(mgr, info, info->sgt); |
| if (info->buf && info->count) |
| return fpga_mgr_buf_load(mgr, info, info->buf, info->count); |
| if (info->firmware_name) |
| return fpga_mgr_firmware_load(mgr, info, info->firmware_name); |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL_GPL(fpga_mgr_load); |
| |
| static const char * const state_str[] = { |
| [FPGA_MGR_STATE_UNKNOWN] = "unknown", |
| [FPGA_MGR_STATE_POWER_OFF] = "power off", |
| [FPGA_MGR_STATE_POWER_UP] = "power up", |
| [FPGA_MGR_STATE_RESET] = "reset", |
| |
| /* requesting FPGA image from firmware */ |
| [FPGA_MGR_STATE_FIRMWARE_REQ] = "firmware request", |
| [FPGA_MGR_STATE_FIRMWARE_REQ_ERR] = "firmware request error", |
| |
| /* Parse FPGA image header */ |
| [FPGA_MGR_STATE_PARSE_HEADER] = "parse header", |
| [FPGA_MGR_STATE_PARSE_HEADER_ERR] = "parse header error", |
| |
| /* Preparing FPGA to receive image */ |
| [FPGA_MGR_STATE_WRITE_INIT] = "write init", |
| [FPGA_MGR_STATE_WRITE_INIT_ERR] = "write init error", |
| |
| /* Writing image to FPGA */ |
| [FPGA_MGR_STATE_WRITE] = "write", |
| [FPGA_MGR_STATE_WRITE_ERR] = "write error", |
| |
| /* Finishing configuration after image has been written */ |
| [FPGA_MGR_STATE_WRITE_COMPLETE] = "write complete", |
| [FPGA_MGR_STATE_WRITE_COMPLETE_ERR] = "write complete error", |
| |
| /* FPGA reports to be in normal operating mode */ |
| [FPGA_MGR_STATE_OPERATING] = "operating", |
| }; |
| |
| static ssize_t name_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct fpga_manager *mgr = to_fpga_manager(dev); |
| |
| return sprintf(buf, "%s\n", mgr->name); |
| } |
| |
| static ssize_t state_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct fpga_manager *mgr = to_fpga_manager(dev); |
| |
| return sprintf(buf, "%s\n", state_str[mgr->state]); |
| } |
| |
| static ssize_t status_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct fpga_manager *mgr = to_fpga_manager(dev); |
| u64 status; |
| int len = 0; |
| |
| status = fpga_mgr_status(mgr); |
| |
| if (status & FPGA_MGR_STATUS_OPERATION_ERR) |
| len += sprintf(buf + len, "reconfig operation error\n"); |
| if (status & FPGA_MGR_STATUS_CRC_ERR) |
| len += sprintf(buf + len, "reconfig CRC error\n"); |
| if (status & FPGA_MGR_STATUS_INCOMPATIBLE_IMAGE_ERR) |
| len += sprintf(buf + len, "reconfig incompatible image\n"); |
| if (status & FPGA_MGR_STATUS_IP_PROTOCOL_ERR) |
| len += sprintf(buf + len, "reconfig IP protocol error\n"); |
| if (status & FPGA_MGR_STATUS_FIFO_OVERFLOW_ERR) |
| len += sprintf(buf + len, "reconfig fifo overflow error\n"); |
| |
| return len; |
| } |
| |
| static DEVICE_ATTR_RO(name); |
| static DEVICE_ATTR_RO(state); |
| static DEVICE_ATTR_RO(status); |
| |
| static struct attribute *fpga_mgr_attrs[] = { |
| &dev_attr_name.attr, |
| &dev_attr_state.attr, |
| &dev_attr_status.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(fpga_mgr); |
| |
| static struct fpga_manager *__fpga_mgr_get(struct device *dev) |
| { |
| struct fpga_manager *mgr; |
| |
| mgr = to_fpga_manager(dev); |
| |
| if (!try_module_get(dev->parent->driver->owner)) |
| goto err_dev; |
| |
| return mgr; |
| |
| err_dev: |
| put_device(dev); |
| return ERR_PTR(-ENODEV); |
| } |
| |
| static int fpga_mgr_dev_match(struct device *dev, const void *data) |
| { |
| return dev->parent == data; |
| } |
| |
| /** |
| * fpga_mgr_get - Given a device, get a reference to an fpga mgr. |
| * @dev: parent device that fpga mgr was registered with |
| * |
| * Return: fpga manager struct or IS_ERR() condition containing error code. |
| */ |
| struct fpga_manager *fpga_mgr_get(struct device *dev) |
| { |
| struct device *mgr_dev = class_find_device(fpga_mgr_class, NULL, dev, |
| fpga_mgr_dev_match); |
| if (!mgr_dev) |
| return ERR_PTR(-ENODEV); |
| |
| return __fpga_mgr_get(mgr_dev); |
| } |
| EXPORT_SYMBOL_GPL(fpga_mgr_get); |
| |
| /** |
| * of_fpga_mgr_get - Given a device node, get a reference to an fpga mgr. |
| * |
| * @node: device node |
| * |
| * Return: fpga manager struct or IS_ERR() condition containing error code. |
| */ |
| struct fpga_manager *of_fpga_mgr_get(struct device_node *node) |
| { |
| struct device *dev; |
| |
| dev = class_find_device_by_of_node(fpga_mgr_class, node); |
| if (!dev) |
| return ERR_PTR(-ENODEV); |
| |
| return __fpga_mgr_get(dev); |
| } |
| EXPORT_SYMBOL_GPL(of_fpga_mgr_get); |
| |
| /** |
| * fpga_mgr_put - release a reference to an fpga manager |
| * @mgr: fpga manager structure |
| */ |
| void fpga_mgr_put(struct fpga_manager *mgr) |
| { |
| module_put(mgr->dev.parent->driver->owner); |
| put_device(&mgr->dev); |
| } |
| EXPORT_SYMBOL_GPL(fpga_mgr_put); |
| |
| /** |
| * fpga_mgr_lock - Lock FPGA manager for exclusive use |
| * @mgr: fpga manager |
| * |
| * Given a pointer to FPGA Manager (from fpga_mgr_get() or |
| * of_fpga_mgr_put()) attempt to get the mutex. The user should call |
| * fpga_mgr_lock() and verify that it returns 0 before attempting to |
| * program the FPGA. Likewise, the user should call fpga_mgr_unlock |
| * when done programming the FPGA. |
| * |
| * Return: 0 for success or -EBUSY |
| */ |
| int fpga_mgr_lock(struct fpga_manager *mgr) |
| { |
| if (!mutex_trylock(&mgr->ref_mutex)) { |
| dev_err(&mgr->dev, "FPGA manager is in use.\n"); |
| return -EBUSY; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(fpga_mgr_lock); |
| |
| /** |
| * fpga_mgr_unlock - Unlock FPGA manager after done programming |
| * @mgr: fpga manager |
| */ |
| void fpga_mgr_unlock(struct fpga_manager *mgr) |
| { |
| mutex_unlock(&mgr->ref_mutex); |
| } |
| EXPORT_SYMBOL_GPL(fpga_mgr_unlock); |
| |
| /** |
| * fpga_mgr_register_full - create and register an FPGA Manager device |
| * @parent: fpga manager device from pdev |
| * @info: parameters for fpga manager |
| * |
| * The caller of this function is responsible for calling fpga_mgr_unregister(). |
| * Using devm_fpga_mgr_register_full() instead is recommended. |
| * |
| * Return: pointer to struct fpga_manager pointer or ERR_PTR() |
| */ |
| struct fpga_manager * |
| fpga_mgr_register_full(struct device *parent, const struct fpga_manager_info *info) |
| { |
| const struct fpga_manager_ops *mops = info->mops; |
| struct fpga_manager *mgr; |
| int id, ret; |
| |
| if (!mops) { |
| dev_err(parent, "Attempt to register without fpga_manager_ops\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (!info->name || !strlen(info->name)) { |
| dev_err(parent, "Attempt to register with no name!\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| mgr = kzalloc(sizeof(*mgr), GFP_KERNEL); |
| if (!mgr) |
| return ERR_PTR(-ENOMEM); |
| |
| id = ida_alloc(&fpga_mgr_ida, GFP_KERNEL); |
| if (id < 0) { |
| ret = id; |
| goto error_kfree; |
| } |
| |
| mutex_init(&mgr->ref_mutex); |
| |
| mgr->name = info->name; |
| mgr->mops = info->mops; |
| mgr->priv = info->priv; |
| mgr->compat_id = info->compat_id; |
| |
| mgr->dev.class = fpga_mgr_class; |
| mgr->dev.groups = mops->groups; |
| mgr->dev.parent = parent; |
| mgr->dev.of_node = parent->of_node; |
| mgr->dev.id = id; |
| |
| ret = dev_set_name(&mgr->dev, "fpga%d", id); |
| if (ret) |
| goto error_device; |
| |
| /* |
| * Initialize framework state by requesting low level driver read state |
| * from device. FPGA may be in reset mode or may have been programmed |
| * by bootloader or EEPROM. |
| */ |
| mgr->state = fpga_mgr_state(mgr); |
| |
| ret = device_register(&mgr->dev); |
| if (ret) { |
| put_device(&mgr->dev); |
| return ERR_PTR(ret); |
| } |
| |
| return mgr; |
| |
| error_device: |
| ida_free(&fpga_mgr_ida, id); |
| error_kfree: |
| kfree(mgr); |
| |
| return ERR_PTR(ret); |
| } |
| EXPORT_SYMBOL_GPL(fpga_mgr_register_full); |
| |
| /** |
| * fpga_mgr_register - create and register an FPGA Manager device |
| * @parent: fpga manager device from pdev |
| * @name: fpga manager name |
| * @mops: pointer to structure of fpga manager ops |
| * @priv: fpga manager private data |
| * |
| * The caller of this function is responsible for calling fpga_mgr_unregister(). |
| * Using devm_fpga_mgr_register() instead is recommended. This simple |
| * version of the register function should be sufficient for most users. The |
| * fpga_mgr_register_full() function is available for users that need to pass |
| * additional, optional parameters. |
| * |
| * Return: pointer to struct fpga_manager pointer or ERR_PTR() |
| */ |
| struct fpga_manager * |
| fpga_mgr_register(struct device *parent, const char *name, |
| const struct fpga_manager_ops *mops, void *priv) |
| { |
| struct fpga_manager_info info = { 0 }; |
| |
| info.name = name; |
| info.mops = mops; |
| info.priv = priv; |
| |
| return fpga_mgr_register_full(parent, &info); |
| } |
| EXPORT_SYMBOL_GPL(fpga_mgr_register); |
| |
| /** |
| * fpga_mgr_unregister - unregister an FPGA manager |
| * @mgr: fpga manager struct |
| * |
| * This function is intended for use in an FPGA manager driver's remove function. |
| */ |
| void fpga_mgr_unregister(struct fpga_manager *mgr) |
| { |
| dev_info(&mgr->dev, "%s %s\n", __func__, mgr->name); |
| |
| /* |
| * If the low level driver provides a method for putting fpga into |
| * a desired state upon unregister, do it. |
| */ |
| fpga_mgr_fpga_remove(mgr); |
| |
| device_unregister(&mgr->dev); |
| } |
| EXPORT_SYMBOL_GPL(fpga_mgr_unregister); |
| |
| static void devm_fpga_mgr_unregister(struct device *dev, void *res) |
| { |
| struct fpga_mgr_devres *dr = res; |
| |
| fpga_mgr_unregister(dr->mgr); |
| } |
| |
| /** |
| * devm_fpga_mgr_register_full - resource managed variant of fpga_mgr_register() |
| * @parent: fpga manager device from pdev |
| * @info: parameters for fpga manager |
| * |
| * Return: fpga manager pointer on success, negative error code otherwise. |
| * |
| * This is the devres variant of fpga_mgr_register_full() for which the unregister |
| * function will be called automatically when the managing device is detached. |
| */ |
| struct fpga_manager * |
| devm_fpga_mgr_register_full(struct device *parent, const struct fpga_manager_info *info) |
| { |
| struct fpga_mgr_devres *dr; |
| struct fpga_manager *mgr; |
| |
| dr = devres_alloc(devm_fpga_mgr_unregister, sizeof(*dr), GFP_KERNEL); |
| if (!dr) |
| return ERR_PTR(-ENOMEM); |
| |
| mgr = fpga_mgr_register_full(parent, info); |
| if (IS_ERR(mgr)) { |
| devres_free(dr); |
| return mgr; |
| } |
| |
| dr->mgr = mgr; |
| devres_add(parent, dr); |
| |
| return mgr; |
| } |
| EXPORT_SYMBOL_GPL(devm_fpga_mgr_register_full); |
| |
| /** |
| * devm_fpga_mgr_register - resource managed variant of fpga_mgr_register() |
| * @parent: fpga manager device from pdev |
| * @name: fpga manager name |
| * @mops: pointer to structure of fpga manager ops |
| * @priv: fpga manager private data |
| * |
| * Return: fpga manager pointer on success, negative error code otherwise. |
| * |
| * This is the devres variant of fpga_mgr_register() for which the |
| * unregister function will be called automatically when the managing |
| * device is detached. |
| */ |
| struct fpga_manager * |
| devm_fpga_mgr_register(struct device *parent, const char *name, |
| const struct fpga_manager_ops *mops, void *priv) |
| { |
| struct fpga_manager_info info = { 0 }; |
| |
| info.name = name; |
| info.mops = mops; |
| info.priv = priv; |
| |
| return devm_fpga_mgr_register_full(parent, &info); |
| } |
| EXPORT_SYMBOL_GPL(devm_fpga_mgr_register); |
| |
| static void fpga_mgr_dev_release(struct device *dev) |
| { |
| struct fpga_manager *mgr = to_fpga_manager(dev); |
| |
| ida_free(&fpga_mgr_ida, mgr->dev.id); |
| kfree(mgr); |
| } |
| |
| static int __init fpga_mgr_class_init(void) |
| { |
| pr_info("FPGA manager framework\n"); |
| |
| fpga_mgr_class = class_create("fpga_manager"); |
| if (IS_ERR(fpga_mgr_class)) |
| return PTR_ERR(fpga_mgr_class); |
| |
| fpga_mgr_class->dev_groups = fpga_mgr_groups; |
| fpga_mgr_class->dev_release = fpga_mgr_dev_release; |
| |
| return 0; |
| } |
| |
| static void __exit fpga_mgr_class_exit(void) |
| { |
| class_destroy(fpga_mgr_class); |
| ida_destroy(&fpga_mgr_ida); |
| } |
| |
| MODULE_AUTHOR("Alan Tull <atull@kernel.org>"); |
| MODULE_DESCRIPTION("FPGA manager framework"); |
| MODULE_LICENSE("GPL v2"); |
| |
| subsys_initcall(fpga_mgr_class_init); |
| module_exit(fpga_mgr_class_exit); |