| /* arch/sh/kernel/pci.c |
| * $Id: pci.c,v 1.1 2003/08/24 19:15:45 lethal Exp $ |
| * |
| * Copyright (c) 2002 M. R. Brown <mrbrown@linux-sh.org> |
| * |
| * |
| * These functions are collected here to reduce duplication of common |
| * code amongst the many platform-specific PCI support code files. |
| * |
| * These routines require the following board-specific routines: |
| * void pcibios_fixup_irqs(); |
| * |
| * See include/asm-sh/pci.h for more information. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| |
| static int __init pcibios_init(void) |
| { |
| struct pci_channel *p; |
| struct pci_bus *bus; |
| int busno; |
| |
| #ifdef CONFIG_PCI_AUTO |
| /* assign resources */ |
| busno = 0; |
| for (p = board_pci_channels; p->pci_ops != NULL; p++) { |
| busno = pciauto_assign_resources(busno, p) + 1; |
| } |
| #endif |
| |
| /* scan the buses */ |
| busno = 0; |
| for (p= board_pci_channels; p->pci_ops != NULL; p++) { |
| bus = pci_scan_bus(busno, p->pci_ops, p); |
| busno = bus->subordinate+1; |
| } |
| |
| /* board-specific fixups */ |
| pcibios_fixup_irqs(); |
| |
| return 0; |
| } |
| |
| subsys_initcall(pcibios_init); |
| |
| void |
| pcibios_update_resource(struct pci_dev *dev, struct resource *root, |
| struct resource *res, int resource) |
| { |
| u32 new, check; |
| int reg; |
| |
| new = res->start | (res->flags & PCI_REGION_FLAG_MASK); |
| if (resource < 6) { |
| reg = PCI_BASE_ADDRESS_0 + 4*resource; |
| } else if (resource == PCI_ROM_RESOURCE) { |
| res->flags |= IORESOURCE_ROM_ENABLE; |
| new |= PCI_ROM_ADDRESS_ENABLE; |
| reg = dev->rom_base_reg; |
| } else { |
| /* Somebody might have asked allocation of a non-standard resource */ |
| return; |
| } |
| |
| pci_write_config_dword(dev, reg, new); |
| pci_read_config_dword(dev, reg, &check); |
| if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { |
| printk(KERN_ERR "PCI: Error while updating region " |
| "%s/%d (%08x != %08x)\n", pci_name(dev), resource, |
| new, check); |
| } |
| } |
| |
| void pcibios_align_resource(void *data, struct resource *res, |
| resource_size_t size, resource_size_t align) |
| __attribute__ ((weak)); |
| |
| /* |
| * We need to avoid collisions with `mirrored' VGA ports |
| * and other strange ISA hardware, so we always want the |
| * addresses to be allocated in the 0x000-0x0ff region |
| * modulo 0x400. |
| */ |
| void pcibios_align_resource(void *data, struct resource *res, |
| resource_size_t size, resource_size_t align) |
| { |
| if (res->flags & IORESOURCE_IO) { |
| resource_size_t start = res->start; |
| |
| if (start & 0x300) { |
| start = (start + 0x3ff) & ~0x3ff; |
| res->start = start; |
| } |
| } |
| } |
| |
| int pcibios_enable_device(struct pci_dev *dev, int mask) |
| { |
| u16 cmd, old_cmd; |
| int idx; |
| struct resource *r; |
| |
| pci_read_config_word(dev, PCI_COMMAND, &cmd); |
| old_cmd = cmd; |
| for(idx=0; idx<6; idx++) { |
| if (!(mask & (1 << idx))) |
| continue; |
| r = &dev->resource[idx]; |
| if (!r->start && r->end) { |
| printk(KERN_ERR "PCI: Device %s not available because " |
| "of resource collisions\n", pci_name(dev)); |
| return -EINVAL; |
| } |
| if (r->flags & IORESOURCE_IO) |
| cmd |= PCI_COMMAND_IO; |
| if (r->flags & IORESOURCE_MEM) |
| cmd |= PCI_COMMAND_MEMORY; |
| } |
| if (dev->resource[PCI_ROM_RESOURCE].start) |
| cmd |= PCI_COMMAND_MEMORY; |
| if (cmd != old_cmd) { |
| printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", |
| pci_name(dev), old_cmd, cmd); |
| pci_write_config_word(dev, PCI_COMMAND, cmd); |
| } |
| return 0; |
| } |
| |
| /* |
| * If we set up a device for bus mastering, we need to check and set |
| * the latency timer as it may not be properly set. |
| */ |
| unsigned int pcibios_max_latency = 255; |
| |
| void pcibios_set_master(struct pci_dev *dev) |
| { |
| u8 lat; |
| pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); |
| if (lat < 16) |
| lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; |
| else if (lat > pcibios_max_latency) |
| lat = pcibios_max_latency; |
| else |
| return; |
| printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat); |
| pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); |
| } |
| |
| void __init pcibios_update_irq(struct pci_dev *dev, int irq) |
| { |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); |
| } |