| /* $Id: sbus.c,v 1.19 2002/01/23 11:27:32 davem Exp $ |
| * sbus.c: UltraSparc SBUS controller support. |
| * |
| * Copyright (C) 1999 David S. Miller (davem@redhat.com) |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/spinlock.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| |
| #include <asm/page.h> |
| #include <asm/sbus.h> |
| #include <asm/io.h> |
| #include <asm/upa.h> |
| #include <asm/cache.h> |
| #include <asm/dma.h> |
| #include <asm/irq.h> |
| #include <asm/prom.h> |
| #include <asm/starfire.h> |
| |
| #include "iommu_common.h" |
| |
| /* These should be allocated on an SMP_CACHE_BYTES |
| * aligned boundary for optimal performance. |
| * |
| * On SYSIO, using an 8K page size we have 1GB of SBUS |
| * DMA space mapped. We divide this space into equally |
| * sized clusters. We allocate a DMA mapping from the |
| * cluster that matches the order of the allocation, or |
| * if the order is greater than the number of clusters, |
| * we try to allocate from the last cluster. |
| */ |
| |
| #define NCLUSTERS 8UL |
| #define ONE_GIG (1UL * 1024UL * 1024UL * 1024UL) |
| #define CLUSTER_SIZE (ONE_GIG / NCLUSTERS) |
| #define CLUSTER_MASK (CLUSTER_SIZE - 1) |
| #define CLUSTER_NPAGES (CLUSTER_SIZE >> IO_PAGE_SHIFT) |
| #define MAP_BASE ((u32)0xc0000000) |
| |
| struct sbus_iommu { |
| /*0x00*/spinlock_t lock; |
| |
| /*0x08*/iopte_t *page_table; |
| /*0x10*/unsigned long strbuf_regs; |
| /*0x18*/unsigned long iommu_regs; |
| /*0x20*/unsigned long sbus_control_reg; |
| |
| /*0x28*/volatile unsigned long strbuf_flushflag; |
| |
| /* If NCLUSTERS is ever decresed to 4 or lower, |
| * you must increase the size of the type of |
| * these counters. You have been duly warned. -DaveM |
| */ |
| /*0x30*/struct { |
| u16 next; |
| u16 flush; |
| } alloc_info[NCLUSTERS]; |
| |
| /* The lowest used consistent mapping entry. Since |
| * we allocate consistent maps out of cluster 0 this |
| * is relative to the beginning of closter 0. |
| */ |
| /*0x50*/u32 lowest_consistent_map; |
| }; |
| |
| /* Offsets from iommu_regs */ |
| #define SYSIO_IOMMUREG_BASE 0x2400UL |
| #define IOMMU_CONTROL (0x2400UL - 0x2400UL) /* IOMMU control register */ |
| #define IOMMU_TSBBASE (0x2408UL - 0x2400UL) /* TSB base address register */ |
| #define IOMMU_FLUSH (0x2410UL - 0x2400UL) /* IOMMU flush register */ |
| #define IOMMU_VADIAG (0x4400UL - 0x2400UL) /* SBUS virtual address diagnostic */ |
| #define IOMMU_TAGCMP (0x4408UL - 0x2400UL) /* TLB tag compare diagnostics */ |
| #define IOMMU_LRUDIAG (0x4500UL - 0x2400UL) /* IOMMU LRU queue diagnostics */ |
| #define IOMMU_TAGDIAG (0x4580UL - 0x2400UL) /* TLB tag diagnostics */ |
| #define IOMMU_DRAMDIAG (0x4600UL - 0x2400UL) /* TLB data RAM diagnostics */ |
| |
| #define IOMMU_DRAM_VALID (1UL << 30UL) |
| |
| static void __iommu_flushall(struct sbus_iommu *iommu) |
| { |
| unsigned long tag = iommu->iommu_regs + IOMMU_TAGDIAG; |
| int entry; |
| |
| for (entry = 0; entry < 16; entry++) { |
| upa_writeq(0, tag); |
| tag += 8UL; |
| } |
| upa_readq(iommu->sbus_control_reg); |
| |
| for (entry = 0; entry < NCLUSTERS; entry++) { |
| iommu->alloc_info[entry].flush = |
| iommu->alloc_info[entry].next; |
| } |
| } |
| |
| static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages) |
| { |
| while (npages--) |
| upa_writeq(base + (npages << IO_PAGE_SHIFT), |
| iommu->iommu_regs + IOMMU_FLUSH); |
| upa_readq(iommu->sbus_control_reg); |
| } |
| |
| /* Offsets from strbuf_regs */ |
| #define SYSIO_STRBUFREG_BASE 0x2800UL |
| #define STRBUF_CONTROL (0x2800UL - 0x2800UL) /* Control */ |
| #define STRBUF_PFLUSH (0x2808UL - 0x2800UL) /* Page flush/invalidate */ |
| #define STRBUF_FSYNC (0x2810UL - 0x2800UL) /* Flush synchronization */ |
| #define STRBUF_DRAMDIAG (0x5000UL - 0x2800UL) /* data RAM diagnostic */ |
| #define STRBUF_ERRDIAG (0x5400UL - 0x2800UL) /* error status diagnostics */ |
| #define STRBUF_PTAGDIAG (0x5800UL - 0x2800UL) /* Page tag diagnostics */ |
| #define STRBUF_LTAGDIAG (0x5900UL - 0x2800UL) /* Line tag diagnostics */ |
| |
| #define STRBUF_TAG_VALID 0x02UL |
| |
| static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages, int direction) |
| { |
| unsigned long n; |
| int limit; |
| |
| n = npages; |
| while (n--) |
| upa_writeq(base + (n << IO_PAGE_SHIFT), |
| iommu->strbuf_regs + STRBUF_PFLUSH); |
| |
| /* If the device could not have possibly put dirty data into |
| * the streaming cache, no flush-flag synchronization needs |
| * to be performed. |
| */ |
| if (direction == SBUS_DMA_TODEVICE) |
| return; |
| |
| iommu->strbuf_flushflag = 0UL; |
| |
| /* Whoopee cushion! */ |
| upa_writeq(__pa(&iommu->strbuf_flushflag), |
| iommu->strbuf_regs + STRBUF_FSYNC); |
| upa_readq(iommu->sbus_control_reg); |
| |
| limit = 100000; |
| while (iommu->strbuf_flushflag == 0UL) { |
| limit--; |
| if (!limit) |
| break; |
| udelay(1); |
| rmb(); |
| } |
| if (!limit) |
| printk(KERN_WARNING "sbus_strbuf_flush: flushflag timeout " |
| "vaddr[%08x] npages[%ld]\n", |
| base, npages); |
| } |
| |
| static iopte_t *alloc_streaming_cluster(struct sbus_iommu *iommu, unsigned long npages) |
| { |
| iopte_t *iopte, *limit, *first, *cluster; |
| unsigned long cnum, ent, nent, flush_point, found; |
| |
| cnum = 0; |
| nent = 1; |
| while ((1UL << cnum) < npages) |
| cnum++; |
| if(cnum >= NCLUSTERS) { |
| nent = 1UL << (cnum - NCLUSTERS); |
| cnum = NCLUSTERS - 1; |
| } |
| iopte = iommu->page_table + (cnum * CLUSTER_NPAGES); |
| |
| if (cnum == 0) |
| limit = (iommu->page_table + |
| iommu->lowest_consistent_map); |
| else |
| limit = (iopte + CLUSTER_NPAGES); |
| |
| iopte += ((ent = iommu->alloc_info[cnum].next) << cnum); |
| flush_point = iommu->alloc_info[cnum].flush; |
| |
| first = iopte; |
| cluster = NULL; |
| found = 0; |
| for (;;) { |
| if (iopte_val(*iopte) == 0UL) { |
| found++; |
| if (!cluster) |
| cluster = iopte; |
| } else { |
| /* Used cluster in the way */ |
| cluster = NULL; |
| found = 0; |
| } |
| |
| if (found == nent) |
| break; |
| |
| iopte += (1 << cnum); |
| ent++; |
| if (iopte >= limit) { |
| iopte = (iommu->page_table + (cnum * CLUSTER_NPAGES)); |
| ent = 0; |
| |
| /* Multiple cluster allocations must not wrap */ |
| cluster = NULL; |
| found = 0; |
| } |
| if (ent == flush_point) |
| __iommu_flushall(iommu); |
| if (iopte == first) |
| goto bad; |
| } |
| |
| /* ent/iopte points to the last cluster entry we're going to use, |
| * so save our place for the next allocation. |
| */ |
| if ((iopte + (1 << cnum)) >= limit) |
| ent = 0; |
| else |
| ent = ent + 1; |
| iommu->alloc_info[cnum].next = ent; |
| if (ent == flush_point) |
| __iommu_flushall(iommu); |
| |
| /* I've got your streaming cluster right here buddy boy... */ |
| return cluster; |
| |
| bad: |
| printk(KERN_EMERG "sbus: alloc_streaming_cluster of npages(%ld) failed!\n", |
| npages); |
| return NULL; |
| } |
| |
| static void free_streaming_cluster(struct sbus_iommu *iommu, u32 base, unsigned long npages) |
| { |
| unsigned long cnum, ent, nent; |
| iopte_t *iopte; |
| |
| cnum = 0; |
| nent = 1; |
| while ((1UL << cnum) < npages) |
| cnum++; |
| if(cnum >= NCLUSTERS) { |
| nent = 1UL << (cnum - NCLUSTERS); |
| cnum = NCLUSTERS - 1; |
| } |
| ent = (base & CLUSTER_MASK) >> (IO_PAGE_SHIFT + cnum); |
| iopte = iommu->page_table + ((base - MAP_BASE) >> IO_PAGE_SHIFT); |
| do { |
| iopte_val(*iopte) = 0UL; |
| iopte += 1 << cnum; |
| } while(--nent); |
| |
| /* If the global flush might not have caught this entry, |
| * adjust the flush point such that we will flush before |
| * ever trying to reuse it. |
| */ |
| #define between(X,Y,Z) (((Z) - (Y)) >= ((X) - (Y))) |
| if (between(ent, iommu->alloc_info[cnum].next, iommu->alloc_info[cnum].flush)) |
| iommu->alloc_info[cnum].flush = ent; |
| #undef between |
| } |
| |
| /* We allocate consistent mappings from the end of cluster zero. */ |
| static iopte_t *alloc_consistent_cluster(struct sbus_iommu *iommu, unsigned long npages) |
| { |
| iopte_t *iopte; |
| |
| iopte = iommu->page_table + (1 * CLUSTER_NPAGES); |
| while (iopte > iommu->page_table) { |
| iopte--; |
| if (!(iopte_val(*iopte) & IOPTE_VALID)) { |
| unsigned long tmp = npages; |
| |
| while (--tmp) { |
| iopte--; |
| if (iopte_val(*iopte) & IOPTE_VALID) |
| break; |
| } |
| if (tmp == 0) { |
| u32 entry = (iopte - iommu->page_table); |
| |
| if (entry < iommu->lowest_consistent_map) |
| iommu->lowest_consistent_map = entry; |
| return iopte; |
| } |
| } |
| } |
| return NULL; |
| } |
| |
| static void free_consistent_cluster(struct sbus_iommu *iommu, u32 base, unsigned long npages) |
| { |
| iopte_t *iopte = iommu->page_table + ((base - MAP_BASE) >> IO_PAGE_SHIFT); |
| |
| if ((iopte - iommu->page_table) == iommu->lowest_consistent_map) { |
| iopte_t *walk = iopte + npages; |
| iopte_t *limit; |
| |
| limit = iommu->page_table + CLUSTER_NPAGES; |
| while (walk < limit) { |
| if (iopte_val(*walk) != 0UL) |
| break; |
| walk++; |
| } |
| iommu->lowest_consistent_map = |
| (walk - iommu->page_table); |
| } |
| |
| while (npages--) |
| *iopte++ = __iopte(0UL); |
| } |
| |
| void *sbus_alloc_consistent(struct sbus_dev *sdev, size_t size, dma_addr_t *dvma_addr) |
| { |
| unsigned long order, first_page, flags; |
| struct sbus_iommu *iommu; |
| iopte_t *iopte; |
| void *ret; |
| int npages; |
| |
| if (size <= 0 || sdev == NULL || dvma_addr == NULL) |
| return NULL; |
| |
| size = IO_PAGE_ALIGN(size); |
| order = get_order(size); |
| if (order >= 10) |
| return NULL; |
| first_page = __get_free_pages(GFP_KERNEL|__GFP_COMP, order); |
| if (first_page == 0UL) |
| return NULL; |
| memset((char *)first_page, 0, PAGE_SIZE << order); |
| |
| iommu = sdev->bus->iommu; |
| |
| spin_lock_irqsave(&iommu->lock, flags); |
| iopte = alloc_consistent_cluster(iommu, size >> IO_PAGE_SHIFT); |
| if (iopte == NULL) { |
| spin_unlock_irqrestore(&iommu->lock, flags); |
| free_pages(first_page, order); |
| return NULL; |
| } |
| |
| /* Ok, we're committed at this point. */ |
| *dvma_addr = MAP_BASE + ((iopte - iommu->page_table) << IO_PAGE_SHIFT); |
| ret = (void *) first_page; |
| npages = size >> IO_PAGE_SHIFT; |
| while (npages--) { |
| *iopte++ = __iopte(IOPTE_VALID | IOPTE_CACHE | IOPTE_WRITE | |
| (__pa(first_page) & IOPTE_PAGE)); |
| first_page += IO_PAGE_SIZE; |
| } |
| iommu_flush(iommu, *dvma_addr, size >> IO_PAGE_SHIFT); |
| spin_unlock_irqrestore(&iommu->lock, flags); |
| |
| return ret; |
| } |
| |
| void sbus_free_consistent(struct sbus_dev *sdev, size_t size, void *cpu, dma_addr_t dvma) |
| { |
| unsigned long order, npages; |
| struct sbus_iommu *iommu; |
| |
| if (size <= 0 || sdev == NULL || cpu == NULL) |
| return; |
| |
| npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT; |
| iommu = sdev->bus->iommu; |
| |
| spin_lock_irq(&iommu->lock); |
| free_consistent_cluster(iommu, dvma, npages); |
| iommu_flush(iommu, dvma, npages); |
| spin_unlock_irq(&iommu->lock); |
| |
| order = get_order(size); |
| if (order < 10) |
| free_pages((unsigned long)cpu, order); |
| } |
| |
| dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr, size_t size, int dir) |
| { |
| struct sbus_iommu *iommu = sdev->bus->iommu; |
| unsigned long npages, pbase, flags; |
| iopte_t *iopte; |
| u32 dma_base, offset; |
| unsigned long iopte_bits; |
| |
| if (dir == SBUS_DMA_NONE) |
| BUG(); |
| |
| pbase = (unsigned long) ptr; |
| offset = (u32) (pbase & ~IO_PAGE_MASK); |
| size = (IO_PAGE_ALIGN(pbase + size) - (pbase & IO_PAGE_MASK)); |
| pbase = (unsigned long) __pa(pbase & IO_PAGE_MASK); |
| |
| spin_lock_irqsave(&iommu->lock, flags); |
| npages = size >> IO_PAGE_SHIFT; |
| iopte = alloc_streaming_cluster(iommu, npages); |
| if (iopte == NULL) |
| goto bad; |
| dma_base = MAP_BASE + ((iopte - iommu->page_table) << IO_PAGE_SHIFT); |
| npages = size >> IO_PAGE_SHIFT; |
| iopte_bits = IOPTE_VALID | IOPTE_STBUF | IOPTE_CACHE; |
| if (dir != SBUS_DMA_TODEVICE) |
| iopte_bits |= IOPTE_WRITE; |
| while (npages--) { |
| *iopte++ = __iopte(iopte_bits | (pbase & IOPTE_PAGE)); |
| pbase += IO_PAGE_SIZE; |
| } |
| npages = size >> IO_PAGE_SHIFT; |
| spin_unlock_irqrestore(&iommu->lock, flags); |
| |
| return (dma_base | offset); |
| |
| bad: |
| spin_unlock_irqrestore(&iommu->lock, flags); |
| BUG(); |
| return 0; |
| } |
| |
| void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size, int direction) |
| { |
| struct sbus_iommu *iommu = sdev->bus->iommu; |
| u32 dma_base = dma_addr & IO_PAGE_MASK; |
| unsigned long flags; |
| |
| size = (IO_PAGE_ALIGN(dma_addr + size) - dma_base); |
| |
| spin_lock_irqsave(&iommu->lock, flags); |
| free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT); |
| sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT, direction); |
| spin_unlock_irqrestore(&iommu->lock, flags); |
| } |
| |
| #define SG_ENT_PHYS_ADDRESS(SG) \ |
| (__pa(page_address((SG)->page)) + (SG)->offset) |
| |
| static inline void fill_sg(iopte_t *iopte, struct scatterlist *sg, int nused, int nelems, unsigned long iopte_bits) |
| { |
| struct scatterlist *dma_sg = sg; |
| struct scatterlist *sg_end = sg + nelems; |
| int i; |
| |
| for (i = 0; i < nused; i++) { |
| unsigned long pteval = ~0UL; |
| u32 dma_npages; |
| |
| dma_npages = ((dma_sg->dma_address & (IO_PAGE_SIZE - 1UL)) + |
| dma_sg->dma_length + |
| ((IO_PAGE_SIZE - 1UL))) >> IO_PAGE_SHIFT; |
| do { |
| unsigned long offset; |
| signed int len; |
| |
| /* If we are here, we know we have at least one |
| * more page to map. So walk forward until we |
| * hit a page crossing, and begin creating new |
| * mappings from that spot. |
| */ |
| for (;;) { |
| unsigned long tmp; |
| |
| tmp = (unsigned long) SG_ENT_PHYS_ADDRESS(sg); |
| len = sg->length; |
| if (((tmp ^ pteval) >> IO_PAGE_SHIFT) != 0UL) { |
| pteval = tmp & IO_PAGE_MASK; |
| offset = tmp & (IO_PAGE_SIZE - 1UL); |
| break; |
| } |
| if (((tmp ^ (tmp + len - 1UL)) >> IO_PAGE_SHIFT) != 0UL) { |
| pteval = (tmp + IO_PAGE_SIZE) & IO_PAGE_MASK; |
| offset = 0UL; |
| len -= (IO_PAGE_SIZE - (tmp & (IO_PAGE_SIZE - 1UL))); |
| break; |
| } |
| sg++; |
| } |
| |
| pteval = ((pteval & IOPTE_PAGE) | iopte_bits); |
| while (len > 0) { |
| *iopte++ = __iopte(pteval); |
| pteval += IO_PAGE_SIZE; |
| len -= (IO_PAGE_SIZE - offset); |
| offset = 0; |
| dma_npages--; |
| } |
| |
| pteval = (pteval & IOPTE_PAGE) + len; |
| sg++; |
| |
| /* Skip over any tail mappings we've fully mapped, |
| * adjusting pteval along the way. Stop when we |
| * detect a page crossing event. |
| */ |
| while (sg < sg_end && |
| (pteval << (64 - IO_PAGE_SHIFT)) != 0UL && |
| (pteval == SG_ENT_PHYS_ADDRESS(sg)) && |
| ((pteval ^ |
| (SG_ENT_PHYS_ADDRESS(sg) + sg->length - 1UL)) >> IO_PAGE_SHIFT) == 0UL) { |
| pteval += sg->length; |
| sg++; |
| } |
| if ((pteval << (64 - IO_PAGE_SHIFT)) == 0UL) |
| pteval = ~0UL; |
| } while (dma_npages != 0); |
| dma_sg++; |
| } |
| } |
| |
| int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int dir) |
| { |
| struct sbus_iommu *iommu = sdev->bus->iommu; |
| unsigned long flags, npages; |
| iopte_t *iopte; |
| u32 dma_base; |
| struct scatterlist *sgtmp; |
| int used; |
| unsigned long iopte_bits; |
| |
| if (dir == SBUS_DMA_NONE) |
| BUG(); |
| |
| /* Fast path single entry scatterlists. */ |
| if (nents == 1) { |
| sg->dma_address = |
| sbus_map_single(sdev, |
| (page_address(sg->page) + sg->offset), |
| sg->length, dir); |
| sg->dma_length = sg->length; |
| return 1; |
| } |
| |
| npages = prepare_sg(sg, nents); |
| |
| spin_lock_irqsave(&iommu->lock, flags); |
| iopte = alloc_streaming_cluster(iommu, npages); |
| if (iopte == NULL) |
| goto bad; |
| dma_base = MAP_BASE + ((iopte - iommu->page_table) << IO_PAGE_SHIFT); |
| |
| /* Normalize DVMA addresses. */ |
| sgtmp = sg; |
| used = nents; |
| |
| while (used && sgtmp->dma_length) { |
| sgtmp->dma_address += dma_base; |
| sgtmp++; |
| used--; |
| } |
| used = nents - used; |
| |
| iopte_bits = IOPTE_VALID | IOPTE_STBUF | IOPTE_CACHE; |
| if (dir != SBUS_DMA_TODEVICE) |
| iopte_bits |= IOPTE_WRITE; |
| |
| fill_sg(iopte, sg, used, nents, iopte_bits); |
| #ifdef VERIFY_SG |
| verify_sglist(sg, nents, iopte, npages); |
| #endif |
| spin_unlock_irqrestore(&iommu->lock, flags); |
| |
| return used; |
| |
| bad: |
| spin_unlock_irqrestore(&iommu->lock, flags); |
| BUG(); |
| return 0; |
| } |
| |
| void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int direction) |
| { |
| unsigned long size, flags; |
| struct sbus_iommu *iommu; |
| u32 dvma_base; |
| int i; |
| |
| /* Fast path single entry scatterlists. */ |
| if (nents == 1) { |
| sbus_unmap_single(sdev, sg->dma_address, sg->dma_length, direction); |
| return; |
| } |
| |
| dvma_base = sg[0].dma_address & IO_PAGE_MASK; |
| for (i = 0; i < nents; i++) { |
| if (sg[i].dma_length == 0) |
| break; |
| } |
| i--; |
| size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - dvma_base; |
| |
| iommu = sdev->bus->iommu; |
| spin_lock_irqsave(&iommu->lock, flags); |
| free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT); |
| sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT, direction); |
| spin_unlock_irqrestore(&iommu->lock, flags); |
| } |
| |
| void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t size, int direction) |
| { |
| struct sbus_iommu *iommu = sdev->bus->iommu; |
| unsigned long flags; |
| |
| size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK)); |
| |
| spin_lock_irqsave(&iommu->lock, flags); |
| sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT, direction); |
| spin_unlock_irqrestore(&iommu->lock, flags); |
| } |
| |
| void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, dma_addr_t base, size_t size, int direction) |
| { |
| } |
| |
| void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int direction) |
| { |
| struct sbus_iommu *iommu = sdev->bus->iommu; |
| unsigned long flags, size; |
| u32 base; |
| int i; |
| |
| base = sg[0].dma_address & IO_PAGE_MASK; |
| for (i = 0; i < nents; i++) { |
| if (sg[i].dma_length == 0) |
| break; |
| } |
| i--; |
| size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base; |
| |
| spin_lock_irqsave(&iommu->lock, flags); |
| sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT, direction); |
| spin_unlock_irqrestore(&iommu->lock, flags); |
| } |
| |
| void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int direction) |
| { |
| } |
| |
| /* Enable 64-bit DVMA mode for the given device. */ |
| void sbus_set_sbus64(struct sbus_dev *sdev, int bursts) |
| { |
| struct sbus_iommu *iommu = sdev->bus->iommu; |
| int slot = sdev->slot; |
| unsigned long cfg_reg; |
| u64 val; |
| |
| cfg_reg = iommu->sbus_control_reg; |
| switch (slot) { |
| case 0: |
| cfg_reg += 0x20UL; |
| break; |
| case 1: |
| cfg_reg += 0x28UL; |
| break; |
| case 2: |
| cfg_reg += 0x30UL; |
| break; |
| case 3: |
| cfg_reg += 0x38UL; |
| break; |
| case 13: |
| cfg_reg += 0x40UL; |
| break; |
| case 14: |
| cfg_reg += 0x48UL; |
| break; |
| case 15: |
| cfg_reg += 0x50UL; |
| break; |
| |
| default: |
| return; |
| }; |
| |
| val = upa_readq(cfg_reg); |
| if (val & (1UL << 14UL)) { |
| /* Extended transfer mode already enabled. */ |
| return; |
| } |
| |
| val |= (1UL << 14UL); |
| |
| if (bursts & DMA_BURST8) |
| val |= (1UL << 1UL); |
| if (bursts & DMA_BURST16) |
| val |= (1UL << 2UL); |
| if (bursts & DMA_BURST32) |
| val |= (1UL << 3UL); |
| if (bursts & DMA_BURST64) |
| val |= (1UL << 4UL); |
| upa_writeq(val, cfg_reg); |
| } |
| |
| /* INO number to IMAP register offset for SYSIO external IRQ's. |
| * This should conform to both Sunfire/Wildfire server and Fusion |
| * desktop designs. |
| */ |
| #define SYSIO_IMAP_SLOT0 0x2c04UL |
| #define SYSIO_IMAP_SLOT1 0x2c0cUL |
| #define SYSIO_IMAP_SLOT2 0x2c14UL |
| #define SYSIO_IMAP_SLOT3 0x2c1cUL |
| #define SYSIO_IMAP_SCSI 0x3004UL |
| #define SYSIO_IMAP_ETH 0x300cUL |
| #define SYSIO_IMAP_BPP 0x3014UL |
| #define SYSIO_IMAP_AUDIO 0x301cUL |
| #define SYSIO_IMAP_PFAIL 0x3024UL |
| #define SYSIO_IMAP_KMS 0x302cUL |
| #define SYSIO_IMAP_FLPY 0x3034UL |
| #define SYSIO_IMAP_SHW 0x303cUL |
| #define SYSIO_IMAP_KBD 0x3044UL |
| #define SYSIO_IMAP_MS 0x304cUL |
| #define SYSIO_IMAP_SER 0x3054UL |
| #define SYSIO_IMAP_TIM0 0x3064UL |
| #define SYSIO_IMAP_TIM1 0x306cUL |
| #define SYSIO_IMAP_UE 0x3074UL |
| #define SYSIO_IMAP_CE 0x307cUL |
| #define SYSIO_IMAP_SBERR 0x3084UL |
| #define SYSIO_IMAP_PMGMT 0x308cUL |
| #define SYSIO_IMAP_GFX 0x3094UL |
| #define SYSIO_IMAP_EUPA 0x309cUL |
| |
| #define bogon ((unsigned long) -1) |
| static unsigned long sysio_irq_offsets[] = { |
| /* SBUS Slot 0 --> 3, level 1 --> 7 */ |
| SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, |
| SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, |
| SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, |
| SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, |
| SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, |
| SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, |
| SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, |
| SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, |
| |
| /* Onboard devices (not relevant/used on SunFire). */ |
| SYSIO_IMAP_SCSI, |
| SYSIO_IMAP_ETH, |
| SYSIO_IMAP_BPP, |
| bogon, |
| SYSIO_IMAP_AUDIO, |
| SYSIO_IMAP_PFAIL, |
| bogon, |
| bogon, |
| SYSIO_IMAP_KMS, |
| SYSIO_IMAP_FLPY, |
| SYSIO_IMAP_SHW, |
| SYSIO_IMAP_KBD, |
| SYSIO_IMAP_MS, |
| SYSIO_IMAP_SER, |
| bogon, |
| bogon, |
| SYSIO_IMAP_TIM0, |
| SYSIO_IMAP_TIM1, |
| bogon, |
| bogon, |
| SYSIO_IMAP_UE, |
| SYSIO_IMAP_CE, |
| SYSIO_IMAP_SBERR, |
| SYSIO_IMAP_PMGMT, |
| }; |
| |
| #undef bogon |
| |
| #define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets) |
| |
| /* Convert Interrupt Mapping register pointer to associated |
| * Interrupt Clear register pointer, SYSIO specific version. |
| */ |
| #define SYSIO_ICLR_UNUSED0 0x3400UL |
| #define SYSIO_ICLR_SLOT0 0x340cUL |
| #define SYSIO_ICLR_SLOT1 0x344cUL |
| #define SYSIO_ICLR_SLOT2 0x348cUL |
| #define SYSIO_ICLR_SLOT3 0x34ccUL |
| static unsigned long sysio_imap_to_iclr(unsigned long imap) |
| { |
| unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0; |
| return imap + diff; |
| } |
| |
| unsigned int sbus_build_irq(void *buscookie, unsigned int ino) |
| { |
| struct sbus_bus *sbus = (struct sbus_bus *)buscookie; |
| struct sbus_iommu *iommu = sbus->iommu; |
| unsigned long reg_base = iommu->sbus_control_reg - 0x2000UL; |
| unsigned long imap, iclr; |
| int sbus_level = 0; |
| |
| imap = sysio_irq_offsets[ino]; |
| if (imap == ((unsigned long)-1)) { |
| prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n", |
| ino); |
| prom_halt(); |
| } |
| imap += reg_base; |
| |
| /* SYSIO inconsistency. For external SLOTS, we have to select |
| * the right ICLR register based upon the lower SBUS irq level |
| * bits. |
| */ |
| if (ino >= 0x20) { |
| iclr = sysio_imap_to_iclr(imap); |
| } else { |
| int sbus_slot = (ino & 0x18)>>3; |
| |
| sbus_level = ino & 0x7; |
| |
| switch(sbus_slot) { |
| case 0: |
| iclr = reg_base + SYSIO_ICLR_SLOT0; |
| break; |
| case 1: |
| iclr = reg_base + SYSIO_ICLR_SLOT1; |
| break; |
| case 2: |
| iclr = reg_base + SYSIO_ICLR_SLOT2; |
| break; |
| default: |
| case 3: |
| iclr = reg_base + SYSIO_ICLR_SLOT3; |
| break; |
| }; |
| |
| iclr += ((unsigned long)sbus_level - 1UL) * 8UL; |
| } |
| return build_irq(sbus_level, iclr, imap); |
| } |
| |
| /* Error interrupt handling. */ |
| #define SYSIO_UE_AFSR 0x0030UL |
| #define SYSIO_UE_AFAR 0x0038UL |
| #define SYSIO_UEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */ |
| #define SYSIO_UEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */ |
| #define SYSIO_UEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */ |
| #define SYSIO_UEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */ |
| #define SYSIO_UEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */ |
| #define SYSIO_UEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/ |
| #define SYSIO_UEAFSR_RESV1 0x03ff000000000000UL /* Reserved */ |
| #define SYSIO_UEAFSR_DOFF 0x0000e00000000000UL /* Doubleword Offset */ |
| #define SYSIO_UEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */ |
| #define SYSIO_UEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */ |
| #define SYSIO_UEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */ |
| static irqreturn_t sysio_ue_handler(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct sbus_bus *sbus = dev_id; |
| struct sbus_iommu *iommu = sbus->iommu; |
| unsigned long reg_base = iommu->sbus_control_reg - 0x2000UL; |
| unsigned long afsr_reg, afar_reg; |
| unsigned long afsr, afar, error_bits; |
| int reported; |
| |
| afsr_reg = reg_base + SYSIO_UE_AFSR; |
| afar_reg = reg_base + SYSIO_UE_AFAR; |
| |
| /* Latch error status. */ |
| afsr = upa_readq(afsr_reg); |
| afar = upa_readq(afar_reg); |
| |
| /* Clear primary/secondary error status bits. */ |
| error_bits = afsr & |
| (SYSIO_UEAFSR_PPIO | SYSIO_UEAFSR_PDRD | SYSIO_UEAFSR_PDWR | |
| SYSIO_UEAFSR_SPIO | SYSIO_UEAFSR_SDRD | SYSIO_UEAFSR_SDWR); |
| upa_writeq(error_bits, afsr_reg); |
| |
| /* Log the error. */ |
| printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n", |
| sbus->portid, |
| (((error_bits & SYSIO_UEAFSR_PPIO) ? |
| "PIO" : |
| ((error_bits & SYSIO_UEAFSR_PDRD) ? |
| "DVMA Read" : |
| ((error_bits & SYSIO_UEAFSR_PDWR) ? |
| "DVMA Write" : "???"))))); |
| printk("SYSIO[%x]: DOFF[%lx] SIZE[%lx] MID[%lx]\n", |
| sbus->portid, |
| (afsr & SYSIO_UEAFSR_DOFF) >> 45UL, |
| (afsr & SYSIO_UEAFSR_SIZE) >> 42UL, |
| (afsr & SYSIO_UEAFSR_MID) >> 37UL); |
| printk("SYSIO[%x]: AFAR[%016lx]\n", sbus->portid, afar); |
| printk("SYSIO[%x]: Secondary UE errors [", sbus->portid); |
| reported = 0; |
| if (afsr & SYSIO_UEAFSR_SPIO) { |
| reported++; |
| printk("(PIO)"); |
| } |
| if (afsr & SYSIO_UEAFSR_SDRD) { |
| reported++; |
| printk("(DVMA Read)"); |
| } |
| if (afsr & SYSIO_UEAFSR_SDWR) { |
| reported++; |
| printk("(DVMA Write)"); |
| } |
| if (!reported) |
| printk("(none)"); |
| printk("]\n"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| #define SYSIO_CE_AFSR 0x0040UL |
| #define SYSIO_CE_AFAR 0x0048UL |
| #define SYSIO_CEAFSR_PPIO 0x8000000000000000UL /* Primary PIO cause */ |
| #define SYSIO_CEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read cause */ |
| #define SYSIO_CEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write cause */ |
| #define SYSIO_CEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO cause */ |
| #define SYSIO_CEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read cause */ |
| #define SYSIO_CEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write cause*/ |
| #define SYSIO_CEAFSR_RESV1 0x0300000000000000UL /* Reserved */ |
| #define SYSIO_CEAFSR_ESYND 0x00ff000000000000UL /* Syndrome Bits */ |
| #define SYSIO_CEAFSR_DOFF 0x0000e00000000000UL /* Double Offset */ |
| #define SYSIO_CEAFSR_SIZE 0x00001c0000000000UL /* Bad transfer size 2^SIZE */ |
| #define SYSIO_CEAFSR_MID 0x000003e000000000UL /* UPA MID causing the fault */ |
| #define SYSIO_CEAFSR_RESV2 0x0000001fffffffffUL /* Reserved */ |
| static irqreturn_t sysio_ce_handler(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct sbus_bus *sbus = dev_id; |
| struct sbus_iommu *iommu = sbus->iommu; |
| unsigned long reg_base = iommu->sbus_control_reg - 0x2000UL; |
| unsigned long afsr_reg, afar_reg; |
| unsigned long afsr, afar, error_bits; |
| int reported; |
| |
| afsr_reg = reg_base + SYSIO_CE_AFSR; |
| afar_reg = reg_base + SYSIO_CE_AFAR; |
| |
| /* Latch error status. */ |
| afsr = upa_readq(afsr_reg); |
| afar = upa_readq(afar_reg); |
| |
| /* Clear primary/secondary error status bits. */ |
| error_bits = afsr & |
| (SYSIO_CEAFSR_PPIO | SYSIO_CEAFSR_PDRD | SYSIO_CEAFSR_PDWR | |
| SYSIO_CEAFSR_SPIO | SYSIO_CEAFSR_SDRD | SYSIO_CEAFSR_SDWR); |
| upa_writeq(error_bits, afsr_reg); |
| |
| printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n", |
| sbus->portid, |
| (((error_bits & SYSIO_CEAFSR_PPIO) ? |
| "PIO" : |
| ((error_bits & SYSIO_CEAFSR_PDRD) ? |
| "DVMA Read" : |
| ((error_bits & SYSIO_CEAFSR_PDWR) ? |
| "DVMA Write" : "???"))))); |
| |
| /* XXX Use syndrome and afar to print out module string just like |
| * XXX UDB CE trap handler does... -DaveM |
| */ |
| printk("SYSIO[%x]: DOFF[%lx] ECC Syndrome[%lx] Size[%lx] MID[%lx]\n", |
| sbus->portid, |
| (afsr & SYSIO_CEAFSR_DOFF) >> 45UL, |
| (afsr & SYSIO_CEAFSR_ESYND) >> 48UL, |
| (afsr & SYSIO_CEAFSR_SIZE) >> 42UL, |
| (afsr & SYSIO_CEAFSR_MID) >> 37UL); |
| printk("SYSIO[%x]: AFAR[%016lx]\n", sbus->portid, afar); |
| |
| printk("SYSIO[%x]: Secondary CE errors [", sbus->portid); |
| reported = 0; |
| if (afsr & SYSIO_CEAFSR_SPIO) { |
| reported++; |
| printk("(PIO)"); |
| } |
| if (afsr & SYSIO_CEAFSR_SDRD) { |
| reported++; |
| printk("(DVMA Read)"); |
| } |
| if (afsr & SYSIO_CEAFSR_SDWR) { |
| reported++; |
| printk("(DVMA Write)"); |
| } |
| if (!reported) |
| printk("(none)"); |
| printk("]\n"); |
| |
| return IRQ_HANDLED; |
| } |
| |
| #define SYSIO_SBUS_AFSR 0x2010UL |
| #define SYSIO_SBUS_AFAR 0x2018UL |
| #define SYSIO_SBAFSR_PLE 0x8000000000000000UL /* Primary Late PIO Error */ |
| #define SYSIO_SBAFSR_PTO 0x4000000000000000UL /* Primary SBUS Timeout */ |
| #define SYSIO_SBAFSR_PBERR 0x2000000000000000UL /* Primary SBUS Error ACK */ |
| #define SYSIO_SBAFSR_SLE 0x1000000000000000UL /* Secondary Late PIO Error */ |
| #define SYSIO_SBAFSR_STO 0x0800000000000000UL /* Secondary SBUS Timeout */ |
| #define SYSIO_SBAFSR_SBERR 0x0400000000000000UL /* Secondary SBUS Error ACK */ |
| #define SYSIO_SBAFSR_RESV1 0x03ff000000000000UL /* Reserved */ |
| #define SYSIO_SBAFSR_RD 0x0000800000000000UL /* Primary was late PIO read */ |
| #define SYSIO_SBAFSR_RESV2 0x0000600000000000UL /* Reserved */ |
| #define SYSIO_SBAFSR_SIZE 0x00001c0000000000UL /* Size of transfer */ |
| #define SYSIO_SBAFSR_MID 0x000003e000000000UL /* MID causing the error */ |
| #define SYSIO_SBAFSR_RESV3 0x0000001fffffffffUL /* Reserved */ |
| static irqreturn_t sysio_sbus_error_handler(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct sbus_bus *sbus = dev_id; |
| struct sbus_iommu *iommu = sbus->iommu; |
| unsigned long afsr_reg, afar_reg, reg_base; |
| unsigned long afsr, afar, error_bits; |
| int reported; |
| |
| reg_base = iommu->sbus_control_reg - 0x2000UL; |
| afsr_reg = reg_base + SYSIO_SBUS_AFSR; |
| afar_reg = reg_base + SYSIO_SBUS_AFAR; |
| |
| afsr = upa_readq(afsr_reg); |
| afar = upa_readq(afar_reg); |
| |
| /* Clear primary/secondary error status bits. */ |
| error_bits = afsr & |
| (SYSIO_SBAFSR_PLE | SYSIO_SBAFSR_PTO | SYSIO_SBAFSR_PBERR | |
| SYSIO_SBAFSR_SLE | SYSIO_SBAFSR_STO | SYSIO_SBAFSR_SBERR); |
| upa_writeq(error_bits, afsr_reg); |
| |
| /* Log the error. */ |
| printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n", |
| sbus->portid, |
| (((error_bits & SYSIO_SBAFSR_PLE) ? |
| "Late PIO Error" : |
| ((error_bits & SYSIO_SBAFSR_PTO) ? |
| "Time Out" : |
| ((error_bits & SYSIO_SBAFSR_PBERR) ? |
| "Error Ack" : "???")))), |
| (afsr & SYSIO_SBAFSR_RD) ? 1 : 0); |
| printk("SYSIO[%x]: size[%lx] MID[%lx]\n", |
| sbus->portid, |
| (afsr & SYSIO_SBAFSR_SIZE) >> 42UL, |
| (afsr & SYSIO_SBAFSR_MID) >> 37UL); |
| printk("SYSIO[%x]: AFAR[%016lx]\n", sbus->portid, afar); |
| printk("SYSIO[%x]: Secondary SBUS errors [", sbus->portid); |
| reported = 0; |
| if (afsr & SYSIO_SBAFSR_SLE) { |
| reported++; |
| printk("(Late PIO Error)"); |
| } |
| if (afsr & SYSIO_SBAFSR_STO) { |
| reported++; |
| printk("(Time Out)"); |
| } |
| if (afsr & SYSIO_SBAFSR_SBERR) { |
| reported++; |
| printk("(Error Ack)"); |
| } |
| if (!reported) |
| printk("(none)"); |
| printk("]\n"); |
| |
| /* XXX check iommu/strbuf for further error status XXX */ |
| |
| return IRQ_HANDLED; |
| } |
| |
| #define ECC_CONTROL 0x0020UL |
| #define SYSIO_ECNTRL_ECCEN 0x8000000000000000UL /* Enable ECC Checking */ |
| #define SYSIO_ECNTRL_UEEN 0x4000000000000000UL /* Enable UE Interrupts */ |
| #define SYSIO_ECNTRL_CEEN 0x2000000000000000UL /* Enable CE Interrupts */ |
| |
| #define SYSIO_UE_INO 0x34 |
| #define SYSIO_CE_INO 0x35 |
| #define SYSIO_SBUSERR_INO 0x36 |
| |
| static void __init sysio_register_error_handlers(struct sbus_bus *sbus) |
| { |
| struct sbus_iommu *iommu = sbus->iommu; |
| unsigned long reg_base = iommu->sbus_control_reg - 0x2000UL; |
| unsigned int irq; |
| u64 control; |
| |
| irq = sbus_build_irq(sbus, SYSIO_UE_INO); |
| if (request_irq(irq, sysio_ue_handler, |
| IRQF_SHARED, "SYSIO UE", sbus) < 0) { |
| prom_printf("SYSIO[%x]: Cannot register UE interrupt.\n", |
| sbus->portid); |
| prom_halt(); |
| } |
| |
| irq = sbus_build_irq(sbus, SYSIO_CE_INO); |
| if (request_irq(irq, sysio_ce_handler, |
| IRQF_SHARED, "SYSIO CE", sbus) < 0) { |
| prom_printf("SYSIO[%x]: Cannot register CE interrupt.\n", |
| sbus->portid); |
| prom_halt(); |
| } |
| |
| irq = sbus_build_irq(sbus, SYSIO_SBUSERR_INO); |
| if (request_irq(irq, sysio_sbus_error_handler, |
| IRQF_SHARED, "SYSIO SBUS Error", sbus) < 0) { |
| prom_printf("SYSIO[%x]: Cannot register SBUS Error interrupt.\n", |
| sbus->portid); |
| prom_halt(); |
| } |
| |
| /* Now turn the error interrupts on and also enable ECC checking. */ |
| upa_writeq((SYSIO_ECNTRL_ECCEN | |
| SYSIO_ECNTRL_UEEN | |
| SYSIO_ECNTRL_CEEN), |
| reg_base + ECC_CONTROL); |
| |
| control = upa_readq(iommu->sbus_control_reg); |
| control |= 0x100UL; /* SBUS Error Interrupt Enable */ |
| upa_writeq(control, iommu->sbus_control_reg); |
| } |
| |
| /* Boot time initialization. */ |
| static void __init sbus_iommu_init(int __node, struct sbus_bus *sbus) |
| { |
| struct linux_prom64_registers *pr; |
| struct device_node *dp; |
| struct sbus_iommu *iommu; |
| unsigned long regs, tsb_base; |
| u64 control; |
| int i; |
| |
| dp = of_find_node_by_phandle(__node); |
| |
| sbus->portid = of_getintprop_default(dp, "upa-portid", -1); |
| |
| pr = of_get_property(dp, "reg", NULL); |
| if (!pr) { |
| prom_printf("sbus_iommu_init: Cannot map SYSIO control registers.\n"); |
| prom_halt(); |
| } |
| regs = pr->phys_addr; |
| |
| iommu = kmalloc(sizeof(*iommu) + SMP_CACHE_BYTES, GFP_ATOMIC); |
| if (iommu == NULL) { |
| prom_printf("sbus_iommu_init: Fatal error, kmalloc(iommu) failed\n"); |
| prom_halt(); |
| } |
| |
| /* Align on E$ line boundary. */ |
| iommu = (struct sbus_iommu *) |
| (((unsigned long)iommu + (SMP_CACHE_BYTES - 1UL)) & |
| ~(SMP_CACHE_BYTES - 1UL)); |
| |
| memset(iommu, 0, sizeof(*iommu)); |
| |
| /* We start with no consistent mappings. */ |
| iommu->lowest_consistent_map = CLUSTER_NPAGES; |
| |
| for (i = 0; i < NCLUSTERS; i++) { |
| iommu->alloc_info[i].flush = 0; |
| iommu->alloc_info[i].next = 0; |
| } |
| |
| /* Setup spinlock. */ |
| spin_lock_init(&iommu->lock); |
| |
| /* Init register offsets. */ |
| iommu->iommu_regs = regs + SYSIO_IOMMUREG_BASE; |
| iommu->strbuf_regs = regs + SYSIO_STRBUFREG_BASE; |
| |
| /* The SYSIO SBUS control register is used for dummy reads |
| * in order to ensure write completion. |
| */ |
| iommu->sbus_control_reg = regs + 0x2000UL; |
| |
| /* Link into SYSIO software state. */ |
| sbus->iommu = iommu; |
| |
| printk("SYSIO: UPA portID %x, at %016lx\n", |
| sbus->portid, regs); |
| |
| /* Setup for TSB_SIZE=7, TBW_SIZE=0, MMU_DE=1, MMU_EN=1 */ |
| control = upa_readq(iommu->iommu_regs + IOMMU_CONTROL); |
| control = ((7UL << 16UL) | |
| (0UL << 2UL) | |
| (1UL << 1UL) | |
| (1UL << 0UL)); |
| |
| /* Using the above configuration we need 1MB iommu page |
| * table (128K ioptes * 8 bytes per iopte). This is |
| * page order 7 on UltraSparc. |
| */ |
| tsb_base = __get_free_pages(GFP_ATOMIC, get_order(IO_TSB_SIZE)); |
| if (tsb_base == 0UL) { |
| prom_printf("sbus_iommu_init: Fatal error, cannot alloc TSB table.\n"); |
| prom_halt(); |
| } |
| |
| iommu->page_table = (iopte_t *) tsb_base; |
| memset(iommu->page_table, 0, IO_TSB_SIZE); |
| |
| upa_writeq(control, iommu->iommu_regs + IOMMU_CONTROL); |
| |
| /* Clean out any cruft in the IOMMU using |
| * diagnostic accesses. |
| */ |
| for (i = 0; i < 16; i++) { |
| unsigned long dram = iommu->iommu_regs + IOMMU_DRAMDIAG; |
| unsigned long tag = iommu->iommu_regs + IOMMU_TAGDIAG; |
| |
| dram += (unsigned long)i * 8UL; |
| tag += (unsigned long)i * 8UL; |
| upa_writeq(0, dram); |
| upa_writeq(0, tag); |
| } |
| upa_readq(iommu->sbus_control_reg); |
| |
| /* Give the TSB to SYSIO. */ |
| upa_writeq(__pa(tsb_base), iommu->iommu_regs + IOMMU_TSBBASE); |
| |
| /* Setup streaming buffer, DE=1 SB_EN=1 */ |
| control = (1UL << 1UL) | (1UL << 0UL); |
| upa_writeq(control, iommu->strbuf_regs + STRBUF_CONTROL); |
| |
| /* Clear out the tags using diagnostics. */ |
| for (i = 0; i < 16; i++) { |
| unsigned long ptag, ltag; |
| |
| ptag = iommu->strbuf_regs + STRBUF_PTAGDIAG; |
| ltag = iommu->strbuf_regs + STRBUF_LTAGDIAG; |
| ptag += (unsigned long)i * 8UL; |
| ltag += (unsigned long)i * 8UL; |
| |
| upa_writeq(0UL, ptag); |
| upa_writeq(0UL, ltag); |
| } |
| |
| /* Enable DVMA arbitration for all devices/slots. */ |
| control = upa_readq(iommu->sbus_control_reg); |
| control |= 0x3fUL; |
| upa_writeq(control, iommu->sbus_control_reg); |
| |
| /* Now some Xfire specific grot... */ |
| if (this_is_starfire) |
| starfire_hookup(sbus->portid); |
| |
| sysio_register_error_handlers(sbus); |
| } |
| |
| void sbus_fill_device_irq(struct sbus_dev *sdev) |
| { |
| struct device_node *dp = of_find_node_by_phandle(sdev->prom_node); |
| struct linux_prom_irqs *irqs; |
| |
| irqs = of_get_property(dp, "interrupts", NULL); |
| if (!irqs) { |
| sdev->irqs[0] = 0; |
| sdev->num_irqs = 0; |
| } else { |
| unsigned int pri = irqs[0].pri; |
| |
| sdev->num_irqs = 1; |
| if (pri < 0x20) |
| pri += sdev->slot * 8; |
| |
| sdev->irqs[0] = sbus_build_irq(sdev->bus, pri); |
| } |
| } |
| |
| void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus) |
| { |
| } |
| |
| void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp) |
| { |
| sbus_iommu_init(dp->node, sbus); |
| } |
| |
| void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp) |
| { |
| } |
| |
| int __init sbus_arch_preinit(void) |
| { |
| return 0; |
| } |
| |
| void __init sbus_arch_postinit(void) |
| { |
| extern void firetruck_init(void); |
| |
| firetruck_init(); |
| } |