| /* |
| * Copyright 2000, 2001 MontaVista Software Inc. |
| * Author: MontaVista Software, Inc. |
| * stevel@mvista.com or source@mvista.com |
| * |
| * This program is free software; you can distribute it and/or modify it |
| * under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| * |
| * Ethernet driver for the MIPS GT96100 Advanced Communication Controller. |
| * |
| * Revision history |
| * |
| * 11.11.2001 Moved to 2.4.14, ppopov@mvista.com. Modified driver to add |
| * proper gt96100A support. |
| * 12.05.2001 Moved eth port 0 to irq 3 (mapped to GT_SERINT0 on EV96100A) |
| * in order for both ports to work. Also cleaned up boot |
| * option support (mac address string parsing), fleshed out |
| * gt96100_cleanup_module(), and other general code cleanups |
| * <stevel@mvista.com>. |
| */ |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/timer.h> |
| #include <linux/errno.h> |
| #include <linux/in.h> |
| #include <linux/ioport.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/delay.h> |
| #include <linux/ctype.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/irq.h> |
| #include <asm/io.h> |
| |
| #define DESC_BE 1 |
| #define DESC_DATA_BE 1 |
| |
| #define GT96100_DEBUG 2 |
| |
| #include "gt96100eth.h" |
| |
| // prototypes |
| static void* dmaalloc(size_t size, dma_addr_t *dma_handle); |
| static void dmafree(size_t size, void *vaddr); |
| static void gt96100_delay(int msec); |
| static int gt96100_add_hash_entry(struct net_device *dev, |
| unsigned char* addr); |
| static void read_mib_counters(struct gt96100_private *gp); |
| static int read_MII(int phy_addr, u32 reg); |
| static int write_MII(int phy_addr, u32 reg, u16 data); |
| static int gt96100_init_module(void); |
| static void gt96100_cleanup_module(void); |
| static void dump_MII(int dbg_lvl, struct net_device *dev); |
| static void dump_tx_desc(int dbg_lvl, struct net_device *dev, int i); |
| static void dump_rx_desc(int dbg_lvl, struct net_device *dev, int i); |
| static void dump_skb(int dbg_lvl, struct net_device *dev, |
| struct sk_buff *skb); |
| static void update_stats(struct gt96100_private *gp); |
| static void abort(struct net_device *dev, u32 abort_bits); |
| static void hard_stop(struct net_device *dev); |
| static void enable_ether_irq(struct net_device *dev); |
| static void disable_ether_irq(struct net_device *dev); |
| static int gt96100_probe1(struct pci_dev *pci, int port_num); |
| static void reset_tx(struct net_device *dev); |
| static void reset_rx(struct net_device *dev); |
| static int gt96100_check_tx_consistent(struct gt96100_private *gp); |
| static int gt96100_init(struct net_device *dev); |
| static int gt96100_open(struct net_device *dev); |
| static int gt96100_close(struct net_device *dev); |
| static int gt96100_tx(struct sk_buff *skb, struct net_device *dev); |
| static int gt96100_rx(struct net_device *dev, u32 status); |
| static irqreturn_t gt96100_interrupt(int irq, void *dev_id, struct pt_regs *regs); |
| static void gt96100_tx_timeout(struct net_device *dev); |
| static void gt96100_set_rx_mode(struct net_device *dev); |
| static struct net_device_stats* gt96100_get_stats(struct net_device *dev); |
| |
| extern char * __init prom_getcmdline(void); |
| |
| static int max_interrupt_work = 32; |
| |
| #define nibswap(x) ((((x) >> 4) & 0x0f) | (((x) << 4) & 0xf0)) |
| |
| #define RUN_AT(x) (jiffies + (x)) |
| |
| // For reading/writing 32-bit words and half-words from/to DMA memory |
| #ifdef DESC_BE |
| #define cpu_to_dma32 cpu_to_be32 |
| #define dma32_to_cpu be32_to_cpu |
| #define cpu_to_dma16 cpu_to_be16 |
| #define dma16_to_cpu be16_to_cpu |
| #else |
| #define cpu_to_dma32 cpu_to_le32 |
| #define dma32_to_cpu le32_to_cpu |
| #define cpu_to_dma16 cpu_to_le16 |
| #define dma16_to_cpu le16_to_cpu |
| #endif |
| |
| static char mac0[18] = "00.02.03.04.05.06"; |
| static char mac1[18] = "00.01.02.03.04.05"; |
| module_param_string(mac0, mac0, 18, 0); |
| module_param_string(mac1, mac0, 18, 0); |
| MODULE_PARM_DESC(mac0, "MAC address for GT96100 ethernet port 0"); |
| MODULE_PARM_DESC(mac1, "MAC address for GT96100 ethernet port 1"); |
| |
| /* |
| * Info for the GT96100 ethernet controller's ports. |
| */ |
| static struct gt96100_if_t { |
| struct net_device *dev; |
| unsigned int iobase; // IO Base address of this port |
| int irq; // IRQ number of this port |
| char *mac_str; |
| } gt96100_iflist[NUM_INTERFACES] = { |
| { |
| NULL, |
| GT96100_ETH0_BASE, GT96100_ETHER0_IRQ, |
| mac0 |
| }, |
| { |
| NULL, |
| GT96100_ETH1_BASE, GT96100_ETHER1_IRQ, |
| mac1 |
| } |
| }; |
| |
| static inline const char* |
| chip_name(int chip_rev) |
| { |
| switch (chip_rev) { |
| case REV_GT96100: |
| return "GT96100"; |
| case REV_GT96100A_1: |
| case REV_GT96100A: |
| return "GT96100A"; |
| default: |
| return "Unknown GT96100"; |
| } |
| } |
| |
| /* |
| DMA memory allocation, derived from pci_alloc_consistent. |
| */ |
| static void * dmaalloc(size_t size, dma_addr_t *dma_handle) |
| { |
| void *ret; |
| |
| ret = (void *)__get_free_pages(GFP_ATOMIC | GFP_DMA, get_order(size)); |
| |
| if (ret != NULL) { |
| dma_cache_inv((unsigned long)ret, size); |
| if (dma_handle != NULL) |
| *dma_handle = virt_to_phys(ret); |
| |
| /* bump virtual address up to non-cached area */ |
| ret = (void*)KSEG1ADDR(ret); |
| } |
| |
| return ret; |
| } |
| |
| static void dmafree(size_t size, void *vaddr) |
| { |
| vaddr = (void*)KSEG0ADDR(vaddr); |
| free_pages((unsigned long)vaddr, get_order(size)); |
| } |
| |
| static void gt96100_delay(int ms) |
| { |
| if (in_interrupt()) |
| return; |
| else |
| msleep_interruptible(ms); |
| } |
| |
| static int |
| parse_mac_addr(struct net_device *dev, char* macstr) |
| { |
| int i, j; |
| unsigned char result, value; |
| |
| for (i=0; i<6; i++) { |
| result = 0; |
| if (i != 5 && *(macstr+2) != '.') { |
| err(__FILE__ "invalid mac address format: %d %c\n", |
| i, *(macstr+2)); |
| return -EINVAL; |
| } |
| |
| for (j=0; j<2; j++) { |
| if (isxdigit(*macstr) && |
| (value = isdigit(*macstr) ? *macstr-'0' : |
| toupper(*macstr)-'A'+10) < 16) { |
| result = result*16 + value; |
| macstr++; |
| } else { |
| err(__FILE__ "invalid mac address " |
| "character: %c\n", *macstr); |
| return -EINVAL; |
| } |
| } |
| |
| macstr++; // step over '.' |
| dev->dev_addr[i] = result; |
| } |
| |
| return 0; |
| } |
| |
| |
| static int |
| read_MII(int phy_addr, u32 reg) |
| { |
| int timedout = 20; |
| u32 smir = smirOpCode | (phy_addr << smirPhyAdBit) | |
| (reg << smirRegAdBit); |
| |
| // wait for last operation to complete |
| while (GT96100_READ(GT96100_ETH_SMI_REG) & smirBusy) { |
| // snooze for 1 msec and check again |
| gt96100_delay(1); |
| |
| if (--timedout == 0) { |
| printk(KERN_ERR "%s: busy timeout!!\n", __FUNCTION__); |
| return -ENODEV; |
| } |
| } |
| |
| GT96100_WRITE(GT96100_ETH_SMI_REG, smir); |
| |
| timedout = 20; |
| // wait for read to complete |
| while (!((smir = GT96100_READ(GT96100_ETH_SMI_REG)) & smirReadValid)) { |
| // snooze for 1 msec and check again |
| gt96100_delay(1); |
| |
| if (--timedout == 0) { |
| printk(KERN_ERR "%s: timeout!!\n", __FUNCTION__); |
| return -ENODEV; |
| } |
| } |
| |
| return (int)(smir & smirDataMask); |
| } |
| |
| static void |
| dump_tx_desc(int dbg_lvl, struct net_device *dev, int i) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| gt96100_td_t *td = &gp->tx_ring[i]; |
| |
| dbg(dbg_lvl, "Tx descriptor at 0x%08lx:\n", virt_to_phys(td)); |
| dbg(dbg_lvl, |
| " cmdstat=%04x, byte_cnt=%04x, buff_ptr=%04x, next=%04x\n", |
| dma32_to_cpu(td->cmdstat), |
| dma16_to_cpu(td->byte_cnt), |
| dma32_to_cpu(td->buff_ptr), |
| dma32_to_cpu(td->next)); |
| } |
| |
| static void |
| dump_rx_desc(int dbg_lvl, struct net_device *dev, int i) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| gt96100_rd_t *rd = &gp->rx_ring[i]; |
| |
| dbg(dbg_lvl, "Rx descriptor at 0x%08lx:\n", virt_to_phys(rd)); |
| dbg(dbg_lvl, " cmdstat=%04x, buff_sz=%04x, byte_cnt=%04x, " |
| "buff_ptr=%04x, next=%04x\n", |
| dma32_to_cpu(rd->cmdstat), |
| dma16_to_cpu(rd->buff_sz), |
| dma16_to_cpu(rd->byte_cnt), |
| dma32_to_cpu(rd->buff_ptr), |
| dma32_to_cpu(rd->next)); |
| } |
| |
| static int |
| write_MII(int phy_addr, u32 reg, u16 data) |
| { |
| int timedout = 20; |
| u32 smir = (phy_addr << smirPhyAdBit) | |
| (reg << smirRegAdBit) | data; |
| |
| // wait for last operation to complete |
| while (GT96100_READ(GT96100_ETH_SMI_REG) & smirBusy) { |
| // snooze for 1 msec and check again |
| gt96100_delay(1); |
| |
| if (--timedout == 0) { |
| printk(KERN_ERR "%s: busy timeout!!\n", __FUNCTION__); |
| return -1; |
| } |
| } |
| |
| GT96100_WRITE(GT96100_ETH_SMI_REG, smir); |
| return 0; |
| } |
| |
| static void |
| dump_MII(int dbg_lvl, struct net_device *dev) |
| { |
| int i, val; |
| struct gt96100_private *gp = netdev_priv(dev); |
| |
| if (dbg_lvl <= GT96100_DEBUG) { |
| for (i=0; i<7; i++) { |
| if ((val = read_MII(gp->phy_addr, i)) >= 0) |
| printk("MII Reg %d=%x\n", i, val); |
| } |
| for (i=16; i<21; i++) { |
| if ((val = read_MII(gp->phy_addr, i)) >= 0) |
| printk("MII Reg %d=%x\n", i, val); |
| } |
| } |
| } |
| |
| static void |
| dump_hw_addr(int dbg_lvl, struct net_device *dev, const char* pfx, |
| const char* func, unsigned char* addr_str) |
| { |
| int i; |
| char buf[100], octet[5]; |
| |
| if (dbg_lvl <= GT96100_DEBUG) { |
| sprintf(buf, pfx, func); |
| for (i = 0; i < 6; i++) { |
| sprintf(octet, "%2.2x%s", |
| addr_str[i], i<5 ? ":" : "\n"); |
| strcat(buf, octet); |
| } |
| info("%s", buf); |
| } |
| } |
| |
| |
| static void |
| dump_skb(int dbg_lvl, struct net_device *dev, struct sk_buff *skb) |
| { |
| int i; |
| unsigned char* skbdata; |
| |
| if (dbg_lvl <= GT96100_DEBUG) { |
| dbg(dbg_lvl, "%s: skb=%p, skb->data=%p, skb->len=%d\n", |
| __FUNCTION__, skb, skb->data, skb->len); |
| |
| skbdata = (unsigned char*)KSEG1ADDR(skb->data); |
| |
| for (i=0; i<skb->len; i++) { |
| if (!(i % 16)) |
| printk(KERN_DEBUG "\n %3.3x: %2.2x,", |
| i, skbdata[i]); |
| else |
| printk(KERN_DEBUG "%2.2x,", skbdata[i]); |
| } |
| printk(KERN_DEBUG "\n"); |
| } |
| } |
| |
| |
| static int |
| gt96100_add_hash_entry(struct net_device *dev, unsigned char* addr) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| //u16 hashResult, stmp; |
| //unsigned char ctmp, hash_ea[6]; |
| u32 tblEntry1, tblEntry0, *tblEntryAddr; |
| int i; |
| |
| tblEntry1 = hteValid | hteRD; |
| tblEntry1 |= (u32)addr[5] << 3; |
| tblEntry1 |= (u32)addr[4] << 11; |
| tblEntry1 |= (u32)addr[3] << 19; |
| tblEntry1 |= ((u32)addr[2] & 0x1f) << 27; |
| dbg(3, "%s: tblEntry1=%x\n", __FUNCTION__, tblEntry1); |
| tblEntry0 = ((u32)addr[2] >> 5) & 0x07; |
| tblEntry0 |= (u32)addr[1] << 3; |
| tblEntry0 |= (u32)addr[0] << 11; |
| dbg(3, "%s: tblEntry0=%x\n", __FUNCTION__, tblEntry0); |
| |
| #if 0 |
| |
| for (i=0; i<6; i++) { |
| // nibble swap |
| ctmp = nibswap(addr[i]); |
| // invert every nibble |
| hash_ea[i] = ((ctmp&1)<<3) | ((ctmp&8)>>3) | |
| ((ctmp&2)<<1) | ((ctmp&4)>>1); |
| hash_ea[i] |= ((ctmp&0x10)<<3) | ((ctmp&0x80)>>3) | |
| ((ctmp&0x20)<<1) | ((ctmp&0x40)>>1); |
| } |
| |
| dump_hw_addr(3, dev, "%s: nib swap/invt addr=", __FUNCTION__, hash_ea); |
| |
| if (gp->hash_mode == 0) { |
| hashResult = ((u16)hash_ea[0] & 0xfc) << 7; |
| stmp = ((u16)hash_ea[0] & 0x03) | |
| (((u16)hash_ea[1] & 0x7f) << 2); |
| stmp ^= (((u16)hash_ea[1] >> 7) & 0x01) | |
| ((u16)hash_ea[2] << 1); |
| stmp ^= (u16)hash_ea[3] | (((u16)hash_ea[4] & 1) << 8); |
| hashResult |= stmp; |
| } else { |
| return -1; // don't support hash mode 1 |
| } |
| |
| dbg(3, "%s: hashResult=%x\n", __FUNCTION__, hashResult); |
| |
| tblEntryAddr = |
| (u32 *)(&gp->hash_table[((u32)hashResult & 0x7ff) << 3]); |
| |
| dbg(3, "%s: tblEntryAddr=%p\n", tblEntryAddr, __FUNCTION__); |
| |
| for (i=0; i<HASH_HOP_NUMBER; i++) { |
| if ((*tblEntryAddr & hteValid) && |
| !(*tblEntryAddr & hteSkip)) { |
| // This entry is already occupied, go to next entry |
| tblEntryAddr += 2; |
| dbg(3, "%s: skipping to %p\n", __FUNCTION__, |
| tblEntryAddr); |
| } else { |
| memset(tblEntryAddr, 0, 8); |
| tblEntryAddr[1] = cpu_to_dma32(tblEntry1); |
| tblEntryAddr[0] = cpu_to_dma32(tblEntry0); |
| break; |
| } |
| } |
| |
| if (i >= HASH_HOP_NUMBER) { |
| err("%s: expired!\n", __FUNCTION__); |
| return -1; // Couldn't find an unused entry |
| } |
| |
| #else |
| |
| tblEntryAddr = (u32 *)gp->hash_table; |
| for (i=0; i<RX_HASH_TABLE_SIZE/4; i+=2) { |
| tblEntryAddr[i+1] = cpu_to_dma32(tblEntry1); |
| tblEntryAddr[i] = cpu_to_dma32(tblEntry0); |
| } |
| |
| #endif |
| |
| return 0; |
| } |
| |
| |
| static void |
| read_mib_counters(struct gt96100_private *gp) |
| { |
| u32* mib_regs = (u32*)&gp->mib; |
| int i; |
| |
| for (i=0; i<sizeof(mib_counters_t)/sizeof(u32); i++) |
| mib_regs[i] = GT96100ETH_READ(gp, GT96100_ETH_MIB_COUNT_BASE + |
| i*sizeof(u32)); |
| } |
| |
| |
| static void |
| update_stats(struct gt96100_private *gp) |
| { |
| mib_counters_t *mib = &gp->mib; |
| struct net_device_stats *stats = &gp->stats; |
| |
| read_mib_counters(gp); |
| |
| stats->rx_packets = mib->totalFramesReceived; |
| stats->tx_packets = mib->framesSent; |
| stats->rx_bytes = mib->totalByteReceived; |
| stats->tx_bytes = mib->byteSent; |
| stats->rx_errors = mib->totalFramesReceived - mib->framesReceived; |
| //the tx error counters are incremented by the ISR |
| //rx_dropped incremented by gt96100_rx |
| //tx_dropped incremented by gt96100_tx |
| stats->multicast = mib->multicastFramesReceived; |
| // collisions incremented by gt96100_tx_complete |
| stats->rx_length_errors = mib->oversizeFrames + mib->fragments; |
| // The RxError condition means the Rx DMA encountered a |
| // CPU owned descriptor, which, if things are working as |
| // they should, means the Rx ring has overflowed. |
| stats->rx_over_errors = mib->macRxError; |
| stats->rx_crc_errors = mib->cRCError; |
| } |
| |
| static void |
| abort(struct net_device *dev, u32 abort_bits) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| int timedout = 100; // wait up to 100 msec for hard stop to complete |
| |
| dbg(3, "%s\n", __FUNCTION__); |
| |
| // Return if neither Rx or Tx abort bits are set |
| if (!(abort_bits & (sdcmrAR | sdcmrAT))) |
| return; |
| |
| // make sure only the Rx/Tx abort bits are set |
| abort_bits &= (sdcmrAR | sdcmrAT); |
| |
| spin_lock(&gp->lock); |
| |
| // abort any Rx/Tx DMA immediately |
| GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_COMM, abort_bits); |
| |
| dbg(3, "%s: SDMA comm = %x\n", __FUNCTION__, |
| GT96100ETH_READ(gp, GT96100_ETH_SDMA_COMM)); |
| |
| // wait for abort to complete |
| while (GT96100ETH_READ(gp, GT96100_ETH_SDMA_COMM) & abort_bits) { |
| // snooze for 1 msec and check again |
| gt96100_delay(1); |
| |
| if (--timedout == 0) { |
| err("%s: timeout!!\n", __FUNCTION__); |
| break; |
| } |
| } |
| |
| spin_unlock(&gp->lock); |
| } |
| |
| |
| static void |
| hard_stop(struct net_device *dev) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| |
| dbg(3, "%s\n", __FUNCTION__); |
| |
| disable_ether_irq(dev); |
| |
| abort(dev, sdcmrAR | sdcmrAT); |
| |
| // disable port |
| GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG, 0); |
| } |
| |
| |
| static void |
| enable_ether_irq(struct net_device *dev) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| u32 intMask; |
| /* |
| * route ethernet interrupt to GT_SERINT0 for port 0, |
| * GT_INT0 for port 1. |
| */ |
| int intr_mask_reg = (gp->port_num == 0) ? |
| GT96100_SERINT0_MASK : GT96100_INT0_HIGH_MASK; |
| |
| if (gp->chip_rev >= REV_GT96100A_1) { |
| intMask = icrTxBufferLow | icrTxEndLow | |
| icrTxErrorLow | icrRxOVR | icrTxUdr | |
| icrRxBufferQ0 | icrRxErrorQ0 | |
| icrMIIPhySTC | icrEtherIntSum; |
| } |
| else { |
| intMask = icrTxBufferLow | icrTxEndLow | |
| icrTxErrorLow | icrRxOVR | icrTxUdr | |
| icrRxBuffer | icrRxError | |
| icrMIIPhySTC | icrEtherIntSum; |
| } |
| |
| // unmask interrupts |
| GT96100ETH_WRITE(gp, GT96100_ETH_INT_MASK, intMask); |
| |
| intMask = GT96100_READ(intr_mask_reg); |
| intMask |= 1<<gp->port_num; |
| GT96100_WRITE(intr_mask_reg, intMask); |
| } |
| |
| static void |
| disable_ether_irq(struct net_device *dev) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| u32 intMask; |
| int intr_mask_reg = (gp->port_num == 0) ? |
| GT96100_SERINT0_MASK : GT96100_INT0_HIGH_MASK; |
| |
| intMask = GT96100_READ(intr_mask_reg); |
| intMask &= ~(1<<gp->port_num); |
| GT96100_WRITE(intr_mask_reg, intMask); |
| |
| GT96100ETH_WRITE(gp, GT96100_ETH_INT_MASK, 0); |
| } |
| |
| |
| /* |
| * Init GT96100 ethernet controller driver |
| */ |
| static int gt96100_init_module(void) |
| { |
| struct pci_dev *pci; |
| int i, retval=0; |
| u32 cpuConfig; |
| |
| /* |
| * Stupid probe because this really isn't a PCI device |
| */ |
| if (!(pci = pci_find_device(PCI_VENDOR_ID_MARVELL, |
| PCI_DEVICE_ID_MARVELL_GT96100, NULL)) && |
| !(pci = pci_find_device(PCI_VENDOR_ID_MARVELL, |
| PCI_DEVICE_ID_MARVELL_GT96100A, NULL))) { |
| printk(KERN_ERR __FILE__ ": GT96100 not found!\n"); |
| return -ENODEV; |
| } |
| |
| cpuConfig = GT96100_READ(GT96100_CPU_INTERF_CONFIG); |
| if (cpuConfig & (1<<12)) { |
| printk(KERN_ERR __FILE__ |
| ": must be in Big Endian mode!\n"); |
| return -ENODEV; |
| } |
| |
| for (i=0; i < NUM_INTERFACES; i++) |
| retval |= gt96100_probe1(pci, i); |
| |
| return retval; |
| } |
| |
| static int __init gt96100_probe1(struct pci_dev *pci, int port_num) |
| { |
| struct gt96100_private *gp = NULL; |
| struct gt96100_if_t *gtif = >96100_iflist[port_num]; |
| int phy_addr, phy_id1, phy_id2; |
| u32 phyAD; |
| int retval; |
| unsigned char chip_rev; |
| struct net_device *dev = NULL; |
| |
| if (gtif->irq < 0) { |
| printk(KERN_ERR "%s: irq unknown - probing not supported\n", |
| __FUNCTION__); |
| return -ENODEV; |
| } |
| |
| pci_read_config_byte(pci, PCI_REVISION_ID, &chip_rev); |
| |
| if (chip_rev >= REV_GT96100A_1) { |
| phyAD = GT96100_READ(GT96100_ETH_PHY_ADDR_REG); |
| phy_addr = (phyAD >> (5*port_num)) & 0x1f; |
| } else { |
| /* |
| * not sure what's this about -- probably a gt bug |
| */ |
| phy_addr = port_num; |
| phyAD = GT96100_READ(GT96100_ETH_PHY_ADDR_REG); |
| phyAD &= ~(0x1f << (port_num*5)); |
| phyAD |= phy_addr << (port_num*5); |
| GT96100_WRITE(GT96100_ETH_PHY_ADDR_REG, phyAD); |
| } |
| |
| // probe for the external PHY |
| if ((phy_id1 = read_MII(phy_addr, 2)) <= 0 || |
| (phy_id2 = read_MII(phy_addr, 3)) <= 0) { |
| printk(KERN_ERR "%s: no PHY found on MII%d\n", __FUNCTION__, port_num); |
| return -ENODEV; |
| } |
| |
| if (!request_region(gtif->iobase, GT96100_ETH_IO_SIZE, "GT96100ETH")) { |
| printk(KERN_ERR "%s: request_region failed\n", __FUNCTION__); |
| return -EBUSY; |
| } |
| |
| dev = alloc_etherdev(sizeof(struct gt96100_private)); |
| if (!dev) |
| goto out; |
| gtif->dev = dev; |
| |
| /* private struct aligned and zeroed by alloc_etherdev */ |
| /* Fill in the 'dev' fields. */ |
| dev->base_addr = gtif->iobase; |
| dev->irq = gtif->irq; |
| |
| if ((retval = parse_mac_addr(dev, gtif->mac_str))) { |
| err("%s: MAC address parse failed\n", __FUNCTION__); |
| retval = -EINVAL; |
| goto out1; |
| } |
| |
| gp = netdev_priv(dev); |
| |
| memset(gp, 0, sizeof(*gp)); // clear it |
| |
| gp->port_num = port_num; |
| gp->io_size = GT96100_ETH_IO_SIZE; |
| gp->port_offset = port_num * GT96100_ETH_IO_SIZE; |
| gp->phy_addr = phy_addr; |
| gp->chip_rev = chip_rev; |
| |
| info("%s found at 0x%x, irq %d\n", |
| chip_name(gp->chip_rev), gtif->iobase, gtif->irq); |
| dump_hw_addr(0, dev, "%s: HW Address ", __FUNCTION__, dev->dev_addr); |
| info("%s chip revision=%d\n", chip_name(gp->chip_rev), gp->chip_rev); |
| info("%s ethernet port %d\n", chip_name(gp->chip_rev), gp->port_num); |
| info("external PHY ID1=0x%04x, ID2=0x%04x\n", phy_id1, phy_id2); |
| |
| // Allocate Rx and Tx descriptor rings |
| if (gp->rx_ring == NULL) { |
| // All descriptors in ring must be 16-byte aligned |
| gp->rx_ring = dmaalloc(sizeof(gt96100_rd_t) * RX_RING_SIZE |
| + sizeof(gt96100_td_t) * TX_RING_SIZE, |
| &gp->rx_ring_dma); |
| if (gp->rx_ring == NULL) { |
| retval = -ENOMEM; |
| goto out1; |
| } |
| |
| gp->tx_ring = (gt96100_td_t *)(gp->rx_ring + RX_RING_SIZE); |
| gp->tx_ring_dma = |
| gp->rx_ring_dma + sizeof(gt96100_rd_t) * RX_RING_SIZE; |
| } |
| |
| // Allocate the Rx Data Buffers |
| if (gp->rx_buff == NULL) { |
| gp->rx_buff = dmaalloc(PKT_BUF_SZ*RX_RING_SIZE, |
| &gp->rx_buff_dma); |
| if (gp->rx_buff == NULL) { |
| retval = -ENOMEM; |
| goto out2; |
| } |
| } |
| |
| dbg(3, "%s: rx_ring=%p, tx_ring=%p\n", __FUNCTION__, |
| gp->rx_ring, gp->tx_ring); |
| |
| // Allocate Rx Hash Table |
| if (gp->hash_table == NULL) { |
| gp->hash_table = (char*)dmaalloc(RX_HASH_TABLE_SIZE, |
| &gp->hash_table_dma); |
| if (gp->hash_table == NULL) { |
| retval = -ENOMEM; |
| goto out3; |
| } |
| } |
| |
| dbg(3, "%s: hash=%p\n", __FUNCTION__, gp->hash_table); |
| |
| spin_lock_init(&gp->lock); |
| |
| dev->open = gt96100_open; |
| dev->hard_start_xmit = gt96100_tx; |
| dev->stop = gt96100_close; |
| dev->get_stats = gt96100_get_stats; |
| //dev->do_ioctl = gt96100_ioctl; |
| dev->set_multicast_list = gt96100_set_rx_mode; |
| dev->tx_timeout = gt96100_tx_timeout; |
| dev->watchdog_timeo = GT96100ETH_TX_TIMEOUT; |
| |
| retval = register_netdev(dev); |
| if (retval) |
| goto out4; |
| return 0; |
| |
| out4: |
| dmafree(RX_HASH_TABLE_SIZE, gp->hash_table_dma); |
| out3: |
| dmafree(PKT_BUF_SZ*RX_RING_SIZE, gp->rx_buff); |
| out2: |
| dmafree(sizeof(gt96100_rd_t) * RX_RING_SIZE |
| + sizeof(gt96100_td_t) * TX_RING_SIZE, |
| gp->rx_ring); |
| out1: |
| free_netdev (dev); |
| out: |
| release_region(gtif->iobase, GT96100_ETH_IO_SIZE); |
| |
| err("%s failed. Returns %d\n", __FUNCTION__, retval); |
| return retval; |
| } |
| |
| |
| static void |
| reset_tx(struct net_device *dev) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| int i; |
| |
| abort(dev, sdcmrAT); |
| |
| for (i=0; i<TX_RING_SIZE; i++) { |
| if (gp->tx_skbuff[i]) { |
| if (in_interrupt()) |
| dev_kfree_skb_irq(gp->tx_skbuff[i]); |
| else |
| dev_kfree_skb(gp->tx_skbuff[i]); |
| gp->tx_skbuff[i] = NULL; |
| } |
| |
| gp->tx_ring[i].cmdstat = 0; // CPU owns |
| gp->tx_ring[i].byte_cnt = 0; |
| gp->tx_ring[i].buff_ptr = 0; |
| gp->tx_ring[i].next = |
| cpu_to_dma32(gp->tx_ring_dma + |
| sizeof(gt96100_td_t) * (i+1)); |
| dump_tx_desc(4, dev, i); |
| } |
| /* Wrap the ring. */ |
| gp->tx_ring[i-1].next = cpu_to_dma32(gp->tx_ring_dma); |
| |
| // setup only the lowest priority TxCDP reg |
| GT96100ETH_WRITE(gp, GT96100_ETH_CURR_TX_DESC_PTR0, gp->tx_ring_dma); |
| GT96100ETH_WRITE(gp, GT96100_ETH_CURR_TX_DESC_PTR1, 0); |
| |
| // init Tx indeces and pkt counter |
| gp->tx_next_in = gp->tx_next_out = 0; |
| gp->tx_count = 0; |
| |
| } |
| |
| static void |
| reset_rx(struct net_device *dev) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| int i; |
| |
| abort(dev, sdcmrAR); |
| |
| for (i=0; i<RX_RING_SIZE; i++) { |
| gp->rx_ring[i].next = |
| cpu_to_dma32(gp->rx_ring_dma + |
| sizeof(gt96100_rd_t) * (i+1)); |
| gp->rx_ring[i].buff_ptr = |
| cpu_to_dma32(gp->rx_buff_dma + i*PKT_BUF_SZ); |
| gp->rx_ring[i].buff_sz = cpu_to_dma16(PKT_BUF_SZ); |
| // Give ownership to device, set first and last, enable intr |
| gp->rx_ring[i].cmdstat = |
| cpu_to_dma32((u32)(rxFirst | rxLast | rxOwn | rxEI)); |
| dump_rx_desc(4, dev, i); |
| } |
| /* Wrap the ring. */ |
| gp->rx_ring[i-1].next = cpu_to_dma32(gp->rx_ring_dma); |
| |
| // Setup only the lowest priority RxFDP and RxCDP regs |
| for (i=0; i<4; i++) { |
| if (i == 0) { |
| GT96100ETH_WRITE(gp, GT96100_ETH_1ST_RX_DESC_PTR0, |
| gp->rx_ring_dma); |
| GT96100ETH_WRITE(gp, GT96100_ETH_CURR_RX_DESC_PTR0, |
| gp->rx_ring_dma); |
| } else { |
| GT96100ETH_WRITE(gp, |
| GT96100_ETH_1ST_RX_DESC_PTR0 + i*4, |
| 0); |
| GT96100ETH_WRITE(gp, |
| GT96100_ETH_CURR_RX_DESC_PTR0 + i*4, |
| 0); |
| } |
| } |
| |
| // init Rx NextOut index |
| gp->rx_next_out = 0; |
| } |
| |
| |
| // Returns 1 if the Tx counter and indeces don't gel |
| static int |
| gt96100_check_tx_consistent(struct gt96100_private *gp) |
| { |
| int diff = gp->tx_next_in - gp->tx_next_out; |
| |
| diff = diff<0 ? TX_RING_SIZE + diff : diff; |
| diff = gp->tx_count == TX_RING_SIZE ? diff + TX_RING_SIZE : diff; |
| |
| return (diff != gp->tx_count); |
| } |
| |
| static int |
| gt96100_init(struct net_device *dev) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| u32 tmp; |
| u16 mii_reg; |
| |
| dbg(3, "%s: dev=%p\n", __FUNCTION__, dev); |
| dbg(3, "%s: scs10_lo=%4x, scs10_hi=%4x\n", __FUNCTION__, |
| GT96100_READ(0x8), GT96100_READ(0x10)); |
| dbg(3, "%s: scs32_lo=%4x, scs32_hi=%4x\n", __FUNCTION__, |
| GT96100_READ(0x18), GT96100_READ(0x20)); |
| |
| // Stop and disable Port |
| hard_stop(dev); |
| |
| // Setup CIU Arbiter |
| tmp = GT96100_READ(GT96100_CIU_ARBITER_CONFIG); |
| tmp |= (0x0c << (gp->port_num*2)); // set Ether DMA req priority to hi |
| #ifndef DESC_BE |
| tmp &= ~(1<<31); // set desc endianess to little |
| #else |
| tmp |= (1<<31); |
| #endif |
| GT96100_WRITE(GT96100_CIU_ARBITER_CONFIG, tmp); |
| dbg(3, "%s: CIU Config=%x/%x\n", __FUNCTION__, |
| tmp, GT96100_READ(GT96100_CIU_ARBITER_CONFIG)); |
| |
| // Set routing. |
| tmp = GT96100_READ(GT96100_ROUTE_MAIN) & (0x3f << 18); |
| tmp |= (0x07 << (18 + gp->port_num*3)); |
| GT96100_WRITE(GT96100_ROUTE_MAIN, tmp); |
| |
| /* set MII as peripheral func */ |
| tmp = GT96100_READ(GT96100_GPP_CONFIG2); |
| tmp |= 0x7fff << (gp->port_num*16); |
| GT96100_WRITE(GT96100_GPP_CONFIG2, tmp); |
| |
| /* Set up MII port pin directions */ |
| tmp = GT96100_READ(GT96100_GPP_IO2); |
| tmp |= 0x003d << (gp->port_num*16); |
| GT96100_WRITE(GT96100_GPP_IO2, tmp); |
| |
| // Set-up hash table |
| memset(gp->hash_table, 0, RX_HASH_TABLE_SIZE); // clear it |
| gp->hash_mode = 0; |
| // Add a single entry to hash table - our ethernet address |
| gt96100_add_hash_entry(dev, dev->dev_addr); |
| // Set-up DMA ptr to hash table |
| GT96100ETH_WRITE(gp, GT96100_ETH_HASH_TBL_PTR, gp->hash_table_dma); |
| dbg(3, "%s: Hash Tbl Ptr=%x\n", __FUNCTION__, |
| GT96100ETH_READ(gp, GT96100_ETH_HASH_TBL_PTR)); |
| |
| // Setup Tx |
| reset_tx(dev); |
| |
| dbg(3, "%s: Curr Tx Desc Ptr0=%x\n", __FUNCTION__, |
| GT96100ETH_READ(gp, GT96100_ETH_CURR_TX_DESC_PTR0)); |
| |
| // Setup Rx |
| reset_rx(dev); |
| |
| dbg(3, "%s: 1st/Curr Rx Desc Ptr0=%x/%x\n", __FUNCTION__, |
| GT96100ETH_READ(gp, GT96100_ETH_1ST_RX_DESC_PTR0), |
| GT96100ETH_READ(gp, GT96100_ETH_CURR_RX_DESC_PTR0)); |
| |
| // eth port config register |
| GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG_EXT, |
| pcxrFCTL | pcxrFCTLen | pcxrFLP | pcxrDPLXen); |
| |
| mii_reg = read_MII(gp->phy_addr, 0x11); /* int enable register */ |
| mii_reg |= 2; /* enable mii interrupt */ |
| write_MII(gp->phy_addr, 0x11, mii_reg); |
| |
| dbg(3, "%s: PhyAD=%x\n", __FUNCTION__, |
| GT96100_READ(GT96100_ETH_PHY_ADDR_REG)); |
| |
| // setup DMA |
| |
| // We want the Rx/Tx DMA to write/read data to/from memory in |
| // Big Endian mode. Also set DMA Burst Size to 8 64Bit words. |
| #ifdef DESC_DATA_BE |
| GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_CONFIG, |
| (0xf<<sdcrRCBit) | sdcrRIFB | (3<<sdcrBSZBit)); |
| #else |
| GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_CONFIG, |
| sdcrBLMR | sdcrBLMT | |
| (0xf<<sdcrRCBit) | sdcrRIFB | (3<<sdcrBSZBit)); |
| #endif |
| dbg(3, "%s: SDMA Config=%x\n", __FUNCTION__, |
| GT96100ETH_READ(gp, GT96100_ETH_SDMA_CONFIG)); |
| |
| // start Rx DMA |
| GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_COMM, sdcmrERD); |
| dbg(3, "%s: SDMA Comm=%x\n", __FUNCTION__, |
| GT96100ETH_READ(gp, GT96100_ETH_SDMA_COMM)); |
| |
| // enable this port (set hash size to 1/2K) |
| GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG, pcrEN | pcrHS); |
| dbg(3, "%s: Port Config=%x\n", __FUNCTION__, |
| GT96100ETH_READ(gp, GT96100_ETH_PORT_CONFIG)); |
| |
| /* |
| * Disable all Type-of-Service queueing. All Rx packets will be |
| * treated normally and will be sent to the lowest priority |
| * queue. |
| * |
| * Disable flow-control for now. FIXME: support flow control? |
| */ |
| |
| // clear all the MIB ctr regs |
| GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG_EXT, |
| pcxrFCTL | pcxrFCTLen | pcxrFLP | |
| pcxrPRIOrxOverride); |
| read_mib_counters(gp); |
| GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG_EXT, |
| pcxrFCTL | pcxrFCTLen | pcxrFLP | |
| pcxrPRIOrxOverride | pcxrMIBclrMode); |
| |
| dbg(3, "%s: Port Config Ext=%x\n", __FUNCTION__, |
| GT96100ETH_READ(gp, GT96100_ETH_PORT_CONFIG_EXT)); |
| |
| netif_start_queue(dev); |
| |
| dump_MII(4, dev); |
| |
| // enable interrupts |
| enable_ether_irq(dev); |
| |
| // we should now be receiving frames |
| return 0; |
| } |
| |
| |
| static int |
| gt96100_open(struct net_device *dev) |
| { |
| int retval; |
| |
| dbg(2, "%s: dev=%p\n", __FUNCTION__, dev); |
| |
| // Initialize and startup the GT-96100 ethernet port |
| if ((retval = gt96100_init(dev))) { |
| err("error in gt96100_init\n"); |
| free_irq(dev->irq, dev); |
| return retval; |
| } |
| |
| if ((retval = request_irq(dev->irq, >96100_interrupt, |
| IRQF_SHARED, dev->name, dev))) { |
| err("unable to get IRQ %d\n", dev->irq); |
| return retval; |
| } |
| |
| dbg(2, "%s: Initialization done.\n", __FUNCTION__); |
| |
| return 0; |
| } |
| |
| static int |
| gt96100_close(struct net_device *dev) |
| { |
| dbg(3, "%s: dev=%p\n", __FUNCTION__, dev); |
| |
| // stop the device |
| if (netif_device_present(dev)) { |
| netif_stop_queue(dev); |
| hard_stop(dev); |
| } |
| |
| free_irq(dev->irq, dev); |
| |
| return 0; |
| } |
| |
| |
| static int |
| gt96100_tx(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| unsigned long flags; |
| int nextIn; |
| |
| spin_lock_irqsave(&gp->lock, flags); |
| |
| nextIn = gp->tx_next_in; |
| |
| dbg(3, "%s: nextIn=%d\n", __FUNCTION__, nextIn); |
| |
| if (gp->tx_count >= TX_RING_SIZE) { |
| warn("Tx Ring full, pkt dropped.\n"); |
| gp->stats.tx_dropped++; |
| spin_unlock_irqrestore(&gp->lock, flags); |
| return 1; |
| } |
| |
| if (!(gp->last_psr & psrLink)) { |
| err("%s: Link down, pkt dropped.\n", __FUNCTION__); |
| gp->stats.tx_dropped++; |
| spin_unlock_irqrestore(&gp->lock, flags); |
| return 1; |
| } |
| |
| if (dma32_to_cpu(gp->tx_ring[nextIn].cmdstat) & txOwn) { |
| err("%s: device owns descriptor, pkt dropped.\n", __FUNCTION__); |
| gp->stats.tx_dropped++; |
| // stop the queue, so Tx timeout can fix it |
| netif_stop_queue(dev); |
| spin_unlock_irqrestore(&gp->lock, flags); |
| return 1; |
| } |
| |
| // Prepare the Descriptor at tx_next_in |
| gp->tx_skbuff[nextIn] = skb; |
| gp->tx_ring[nextIn].byte_cnt = cpu_to_dma16(skb->len); |
| gp->tx_ring[nextIn].buff_ptr = cpu_to_dma32(virt_to_phys(skb->data)); |
| // make sure packet gets written back to memory |
| dma_cache_wback_inv((unsigned long)(skb->data), skb->len); |
| // Give ownership to device, set first and last desc, enable interrupt |
| // Setting of ownership bit must be *last*! |
| gp->tx_ring[nextIn].cmdstat = |
| cpu_to_dma32((u32)(txOwn | txGenCRC | txEI | |
| txPad | txFirst | txLast)); |
| |
| dump_tx_desc(4, dev, nextIn); |
| dump_skb(4, dev, skb); |
| |
| // increment tx_next_in with wrap |
| gp->tx_next_in = (nextIn + 1) % TX_RING_SIZE; |
| // If DMA is stopped, restart |
| if (!(GT96100ETH_READ(gp, GT96100_ETH_PORT_STATUS) & psrTxLow)) |
| GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_COMM, |
| sdcmrERD | sdcmrTXDL); |
| |
| // increment count and stop queue if full |
| if (++gp->tx_count == TX_RING_SIZE) { |
| gp->tx_full = 1; |
| netif_stop_queue(dev); |
| dbg(2, "Tx Ring now full, queue stopped.\n"); |
| } |
| |
| dev->trans_start = jiffies; |
| spin_unlock_irqrestore(&gp->lock, flags); |
| |
| return 0; |
| } |
| |
| |
| static int |
| gt96100_rx(struct net_device *dev, u32 status) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| struct sk_buff *skb; |
| int pkt_len, nextOut, cdp; |
| gt96100_rd_t *rd; |
| u32 cmdstat; |
| |
| dbg(3, "%s: dev=%p, status=%x\n", __FUNCTION__, dev, status); |
| |
| cdp = (GT96100ETH_READ(gp, GT96100_ETH_1ST_RX_DESC_PTR0) |
| - gp->rx_ring_dma) / sizeof(gt96100_rd_t); |
| |
| // Continue until we reach 1st descriptor pointer |
| for (nextOut = gp->rx_next_out; nextOut != cdp; |
| nextOut = (nextOut + 1) % RX_RING_SIZE) { |
| |
| if (--gp->intr_work_done == 0) |
| break; |
| |
| rd = &gp->rx_ring[nextOut]; |
| cmdstat = dma32_to_cpu(rd->cmdstat); |
| |
| dbg(4, "%s: Rx desc cmdstat=%x, nextOut=%d\n", __FUNCTION__, |
| cmdstat, nextOut); |
| |
| if (cmdstat & (u32)rxOwn) { |
| //err("%s: device owns descriptor!\n", __FUNCTION__); |
| // DMA is not finished updating descriptor??? |
| // Leave and come back later to pick-up where |
| // we left off. |
| break; |
| } |
| |
| // Drop this received pkt if there were any errors |
| if (((cmdstat & (u32)(rxErrorSummary)) && |
| (cmdstat & (u32)(rxFirst))) || (status & icrRxError)) { |
| // update the detailed rx error counters that |
| // are not covered by the MIB counters. |
| if (cmdstat & (u32)rxOverrun) |
| gp->stats.rx_fifo_errors++; |
| cmdstat |= (u32)rxOwn; |
| rd->cmdstat = cpu_to_dma32(cmdstat); |
| continue; |
| } |
| |
| /* |
| * Must be first and last (ie only) descriptor of packet. We |
| * ignore (drop) any packets that do not fit in one descriptor. |
| * Every descriptor's receive buffer is large enough to hold |
| * the maximum 802.3 frame size, so a multi-descriptor packet |
| * indicates an error. Most if not all corrupted packets will |
| * have already been dropped by the above check for the |
| * rxErrorSummary status bit. |
| */ |
| if (!(cmdstat & (u32)rxFirst) || !(cmdstat & (u32)rxLast)) { |
| if (cmdstat & (u32)rxFirst) { |
| /* |
| * This is the first descriptor of a |
| * multi-descriptor packet. It isn't corrupted |
| * because the above check for rxErrorSummary |
| * would have dropped it already, so what's |
| * the deal with this packet? Good question, |
| * let's dump it out. |
| */ |
| err("%s: desc not first and last!\n", __FUNCTION__); |
| dump_rx_desc(0, dev, nextOut); |
| } |
| cmdstat |= (u32)rxOwn; |
| rd->cmdstat = cpu_to_dma32(cmdstat); |
| // continue to drop every descriptor of this packet |
| continue; |
| } |
| |
| pkt_len = dma16_to_cpu(rd->byte_cnt); |
| |
| /* Create new skb. */ |
| skb = dev_alloc_skb(pkt_len+2); |
| if (skb == NULL) { |
| err("%s: Memory squeeze, dropping packet.\n", __FUNCTION__); |
| gp->stats.rx_dropped++; |
| cmdstat |= (u32)rxOwn; |
| rd->cmdstat = cpu_to_dma32(cmdstat); |
| continue; |
| } |
| skb->dev = dev; |
| skb_reserve(skb, 2); /* 16 byte IP header align */ |
| memcpy(skb_put(skb, pkt_len), |
| &gp->rx_buff[nextOut*PKT_BUF_SZ], pkt_len); |
| skb->protocol = eth_type_trans(skb, dev); |
| dump_skb(4, dev, skb); |
| |
| netif_rx(skb); /* pass the packet to upper layers */ |
| dev->last_rx = jiffies; |
| |
| // now we can release ownership of this desc back to device |
| cmdstat |= (u32)rxOwn; |
| rd->cmdstat = cpu_to_dma32(cmdstat); |
| } |
| |
| if (nextOut == gp->rx_next_out) |
| dbg(3, "%s: RxCDP did not increment?\n", __FUNCTION__); |
| |
| gp->rx_next_out = nextOut; |
| return 0; |
| } |
| |
| |
| static void |
| gt96100_tx_complete(struct net_device *dev, u32 status) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| int nextOut, cdp; |
| gt96100_td_t *td; |
| u32 cmdstat; |
| |
| cdp = (GT96100ETH_READ(gp, GT96100_ETH_CURR_TX_DESC_PTR0) |
| - gp->tx_ring_dma) / sizeof(gt96100_td_t); |
| |
| // Continue until we reach the current descriptor pointer |
| for (nextOut = gp->tx_next_out; nextOut != cdp; |
| nextOut = (nextOut + 1) % TX_RING_SIZE) { |
| |
| if (--gp->intr_work_done == 0) |
| break; |
| |
| td = &gp->tx_ring[nextOut]; |
| cmdstat = dma32_to_cpu(td->cmdstat); |
| |
| dbg(3, "%s: Tx desc cmdstat=%x, nextOut=%d\n", __FUNCTION__, |
| cmdstat, nextOut); |
| |
| if (cmdstat & (u32)txOwn) { |
| /* |
| * DMA is not finished writing descriptor??? |
| * Leave and come back later to pick-up where |
| * we left off. |
| */ |
| break; |
| } |
| |
| // increment Tx error stats |
| if (cmdstat & (u32)txErrorSummary) { |
| dbg(2, "%s: Tx error, cmdstat = %x\n", __FUNCTION__, |
| cmdstat); |
| gp->stats.tx_errors++; |
| if (cmdstat & (u32)txReTxLimit) |
| gp->stats.tx_aborted_errors++; |
| if (cmdstat & (u32)txUnderrun) |
| gp->stats.tx_fifo_errors++; |
| if (cmdstat & (u32)txLateCollision) |
| gp->stats.tx_window_errors++; |
| } |
| |
| if (cmdstat & (u32)txCollision) |
| gp->stats.collisions += |
| (u32)((cmdstat & txReTxCntMask) >> |
| txReTxCntBit); |
| |
| // Wake the queue if the ring was full |
| if (gp->tx_full) { |
| gp->tx_full = 0; |
| if (gp->last_psr & psrLink) { |
| netif_wake_queue(dev); |
| dbg(2, "%s: Tx Ring was full, queue waked\n", |
| __FUNCTION__); |
| } |
| } |
| |
| // decrement tx ring buffer count |
| if (gp->tx_count) gp->tx_count--; |
| |
| // free the skb |
| if (gp->tx_skbuff[nextOut]) { |
| dbg(3, "%s: good Tx, skb=%p\n", __FUNCTION__, |
| gp->tx_skbuff[nextOut]); |
| dev_kfree_skb_irq(gp->tx_skbuff[nextOut]); |
| gp->tx_skbuff[nextOut] = NULL; |
| } else { |
| err("%s: no skb!\n", __FUNCTION__); |
| } |
| } |
| |
| gp->tx_next_out = nextOut; |
| |
| if (gt96100_check_tx_consistent(gp)) { |
| err("%s: Tx queue inconsistent!\n", __FUNCTION__); |
| } |
| |
| if ((status & icrTxEndLow) && gp->tx_count != 0) { |
| // we must restart the DMA |
| dbg(3, "%s: Restarting Tx DMA\n", __FUNCTION__); |
| GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_COMM, |
| sdcmrERD | sdcmrTXDL); |
| } |
| } |
| |
| |
| static irqreturn_t |
| gt96100_interrupt(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| struct net_device *dev = (struct net_device *)dev_id; |
| struct gt96100_private *gp = netdev_priv(dev); |
| u32 status; |
| int handled = 0; |
| |
| if (dev == NULL) { |
| err("%s: null dev ptr\n", __FUNCTION__); |
| return IRQ_NONE; |
| } |
| |
| dbg(3, "%s: entry, icr=%x\n", __FUNCTION__, |
| GT96100ETH_READ(gp, GT96100_ETH_INT_CAUSE)); |
| |
| spin_lock(&gp->lock); |
| |
| gp->intr_work_done = max_interrupt_work; |
| |
| while (gp->intr_work_done > 0) { |
| |
| status = GT96100ETH_READ(gp, GT96100_ETH_INT_CAUSE); |
| // ACK interrupts |
| GT96100ETH_WRITE(gp, GT96100_ETH_INT_CAUSE, ~status); |
| |
| if ((status & icrEtherIntSum) == 0 && |
| !(status & (icrTxBufferLow|icrTxBufferHigh|icrRxBuffer))) |
| break; |
| |
| handled = 1; |
| |
| if (status & icrMIIPhySTC) { |
| u32 psr = GT96100ETH_READ(gp, GT96100_ETH_PORT_STATUS); |
| if (gp->last_psr != psr) { |
| dbg(0, "port status:\n"); |
| dbg(0, " %s MBit/s, %s-duplex, " |
| "flow-control %s, link is %s,\n", |
| psr & psrSpeed ? "100":"10", |
| psr & psrDuplex ? "full":"half", |
| psr & psrFctl ? "disabled":"enabled", |
| psr & psrLink ? "up":"down"); |
| dbg(0, " TxLowQ is %s, TxHighQ is %s, " |
| "Transmitter is %s\n", |
| psr & psrTxLow ? "running":"stopped", |
| psr & psrTxHigh ? "running":"stopped", |
| psr & psrTxInProg ? "on":"off"); |
| |
| if ((psr & psrLink) && !gp->tx_full && |
| netif_queue_stopped(dev)) { |
| dbg(0, "%s: Link up, waking queue.\n", |
| __FUNCTION__); |
| netif_wake_queue(dev); |
| } else if (!(psr & psrLink) && |
| !netif_queue_stopped(dev)) { |
| dbg(0, "%s: Link down, stopping queue.\n", |
| __FUNCTION__); |
| netif_stop_queue(dev); |
| } |
| |
| gp->last_psr = psr; |
| } |
| |
| if (--gp->intr_work_done == 0) |
| break; |
| } |
| |
| if (status & (icrTxBufferLow | icrTxEndLow)) |
| gt96100_tx_complete(dev, status); |
| |
| if (status & (icrRxBuffer | icrRxError)) { |
| gt96100_rx(dev, status); |
| } |
| |
| // Now check TX errors (RX errors were handled in gt96100_rx) |
| if (status & icrTxErrorLow) { |
| err("%s: Tx resource error\n", __FUNCTION__); |
| if (--gp->intr_work_done == 0) |
| break; |
| } |
| |
| if (status & icrTxUdr) { |
| err("%s: Tx underrun error\n", __FUNCTION__); |
| if (--gp->intr_work_done == 0) |
| break; |
| } |
| } |
| |
| if (gp->intr_work_done == 0) { |
| // ACK any remaining pending interrupts |
| GT96100ETH_WRITE(gp, GT96100_ETH_INT_CAUSE, 0); |
| dbg(3, "%s: hit max work\n", __FUNCTION__); |
| } |
| |
| dbg(3, "%s: exit, icr=%x\n", __FUNCTION__, |
| GT96100ETH_READ(gp, GT96100_ETH_INT_CAUSE)); |
| |
| spin_unlock(&gp->lock); |
| return IRQ_RETVAL(handled); |
| } |
| |
| |
| static void |
| gt96100_tx_timeout(struct net_device *dev) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&gp->lock, flags); |
| |
| if (!(gp->last_psr & psrLink)) { |
| err("tx_timeout: link down.\n"); |
| spin_unlock_irqrestore(&gp->lock, flags); |
| } else { |
| if (gt96100_check_tx_consistent(gp)) |
| err("tx_timeout: Tx ring error.\n"); |
| |
| disable_ether_irq(dev); |
| spin_unlock_irqrestore(&gp->lock, flags); |
| reset_tx(dev); |
| enable_ether_irq(dev); |
| |
| netif_wake_queue(dev); |
| } |
| } |
| |
| |
| static void |
| gt96100_set_rx_mode(struct net_device *dev) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| unsigned long flags; |
| //struct dev_mc_list *mcptr; |
| |
| dbg(3, "%s: dev=%p, flags=%x\n", __FUNCTION__, dev, dev->flags); |
| |
| // stop the Receiver DMA |
| abort(dev, sdcmrAR); |
| |
| spin_lock_irqsave(&gp->lock, flags); |
| |
| if (dev->flags & IFF_PROMISC) { |
| GT96100ETH_WRITE(gp, GT96100_ETH_PORT_CONFIG, |
| pcrEN | pcrHS | pcrPM); |
| } |
| |
| #if 0 |
| /* |
| FIXME: currently multicast doesn't work - need to get hash table |
| working first. |
| */ |
| if (dev->mc_count) { |
| // clear hash table |
| memset(gp->hash_table, 0, RX_HASH_TABLE_SIZE); |
| // Add our ethernet address |
| gt96100_add_hash_entry(dev, dev->dev_addr); |
| |
| for (mcptr = dev->mc_list; mcptr; mcptr = mcptr->next) { |
| dump_hw_addr(2, dev, "%s: addr=", __FUNCTION__, |
| mcptr->dmi_addr); |
| gt96100_add_hash_entry(dev, mcptr->dmi_addr); |
| } |
| } |
| #endif |
| |
| // restart Rx DMA |
| GT96100ETH_WRITE(gp, GT96100_ETH_SDMA_COMM, sdcmrERD); |
| |
| spin_unlock_irqrestore(&gp->lock, flags); |
| } |
| |
| static struct net_device_stats * |
| gt96100_get_stats(struct net_device *dev) |
| { |
| struct gt96100_private *gp = netdev_priv(dev); |
| unsigned long flags; |
| |
| dbg(3, "%s: dev=%p\n", __FUNCTION__, dev); |
| |
| if (netif_device_present(dev)) { |
| spin_lock_irqsave (&gp->lock, flags); |
| update_stats(gp); |
| spin_unlock_irqrestore (&gp->lock, flags); |
| } |
| |
| return &gp->stats; |
| } |
| |
| static void gt96100_cleanup_module(void) |
| { |
| int i; |
| for (i=0; i<NUM_INTERFACES; i++) { |
| struct gt96100_if_t *gtif = >96100_iflist[i]; |
| if (gtif->dev != NULL) { |
| struct gt96100_private *gp = (struct gt96100_private *) |
| netdev_priv(gtif->dev); |
| unregister_netdev(gtif->dev); |
| dmafree(RX_HASH_TABLE_SIZE, gp->hash_table_dma); |
| dmafree(PKT_BUF_SZ*RX_RING_SIZE, gp->rx_buff); |
| dmafree(sizeof(gt96100_rd_t) * RX_RING_SIZE |
| + sizeof(gt96100_td_t) * TX_RING_SIZE, |
| gp->rx_ring); |
| free_netdev(gtif->dev); |
| release_region(gtif->iobase, gp->io_size); |
| } |
| } |
| } |
| |
| static int __init gt96100_setup(char *options) |
| { |
| char *this_opt; |
| |
| if (!options || !*options) |
| return 0; |
| |
| while ((this_opt = strsep (&options, ",")) != NULL) { |
| if (!*this_opt) |
| continue; |
| if (!strncmp(this_opt, "mac0:", 5)) { |
| memcpy(mac0, this_opt+5, 17); |
| mac0[17]= '\0'; |
| } else if (!strncmp(this_opt, "mac1:", 5)) { |
| memcpy(mac1, this_opt+5, 17); |
| mac1[17]= '\0'; |
| } |
| } |
| |
| return 1; |
| } |
| |
| __setup("gt96100eth=", gt96100_setup); |
| |
| module_init(gt96100_init_module); |
| module_exit(gt96100_cleanup_module); |
| |
| MODULE_AUTHOR("Steve Longerbeam <stevel@mvista.com>"); |
| MODULE_DESCRIPTION("GT96100 Ethernet driver"); |