| /* |
| * Apple Onboard Audio feature call GPIO control |
| * |
| * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> |
| * |
| * GPL v2, can be found in COPYING. |
| * |
| * This file contains the GPIO control routines for |
| * direct (through feature calls) access to the GPIO |
| * registers. |
| */ |
| |
| #include <asm/pmac_feature.h> |
| #include <linux/interrupt.h> |
| #include "../aoa.h" |
| |
| /* TODO: these are 20 global variables |
| * that aren't used on most machines... |
| * Move them into a dynamically allocated |
| * structure and use that. |
| */ |
| |
| /* these are the GPIO numbers (register addresses as offsets into |
| * the GPIO space) */ |
| static int headphone_mute_gpio; |
| static int amp_mute_gpio; |
| static int lineout_mute_gpio; |
| static int hw_reset_gpio; |
| static int lineout_detect_gpio; |
| static int headphone_detect_gpio; |
| static int linein_detect_gpio; |
| |
| /* see the SWITCH_GPIO macro */ |
| static int headphone_mute_gpio_activestate; |
| static int amp_mute_gpio_activestate; |
| static int lineout_mute_gpio_activestate; |
| static int hw_reset_gpio_activestate; |
| static int lineout_detect_gpio_activestate; |
| static int headphone_detect_gpio_activestate; |
| static int linein_detect_gpio_activestate; |
| |
| /* node pointers that we save when getting the GPIO number |
| * to get the interrupt later */ |
| static struct device_node *lineout_detect_node; |
| static struct device_node *linein_detect_node; |
| static struct device_node *headphone_detect_node; |
| |
| static int lineout_detect_irq; |
| static int linein_detect_irq; |
| static int headphone_detect_irq; |
| |
| static struct device_node *get_gpio(char *name, |
| char *altname, |
| int *gpioptr, |
| int *gpioactiveptr) |
| { |
| struct device_node *np, *gpio; |
| u32 *reg; |
| char *audio_gpio; |
| |
| *gpioptr = -1; |
| |
| /* check if we can get it the easy way ... */ |
| np = of_find_node_by_name(NULL, name); |
| if (!np) { |
| /* some machines have only gpioX/extint-gpioX nodes, |
| * and an audio-gpio property saying what it is ... |
| * So what we have to do is enumerate all children |
| * of the gpio node and check them all. */ |
| gpio = of_find_node_by_name(NULL, "gpio"); |
| if (!gpio) |
| return NULL; |
| while ((np = of_get_next_child(gpio, np))) { |
| audio_gpio = get_property(np, "audio-gpio", NULL); |
| if (!audio_gpio) |
| continue; |
| if (strcmp(audio_gpio, name) == 0) |
| break; |
| if (altname && (strcmp(audio_gpio, altname) == 0)) |
| break; |
| } |
| /* still not found, assume not there */ |
| if (!np) |
| return NULL; |
| } |
| |
| reg = (u32 *)get_property(np, "reg", NULL); |
| if (!reg) |
| return NULL; |
| |
| *gpioptr = *reg; |
| |
| /* this is a hack, usually the GPIOs 'reg' property |
| * should have the offset based from the GPIO space |
| * which is at 0x50, but apparently not always... */ |
| if (*gpioptr < 0x50) |
| *gpioptr += 0x50; |
| |
| reg = (u32 *)get_property(np, "audio-gpio-active-state", NULL); |
| if (!reg) |
| /* Apple seems to default to 1, but |
| * that doesn't seem right at least on most |
| * machines. So until proven that the opposite |
| * is necessary, we default to 0 |
| * (which, incidentally, snd-powermac also does...) */ |
| *gpioactiveptr = 0; |
| else |
| *gpioactiveptr = *reg; |
| |
| return np; |
| } |
| |
| static void get_irq(struct device_node * np, int *irqptr) |
| { |
| *irqptr = irq_of_parse_and_map(np, 0); |
| } |
| |
| /* 0x4 is outenable, 0x1 is out, thus 4 or 5 */ |
| #define SWITCH_GPIO(name, v, on) \ |
| (((v)&~1) | ((on)? \ |
| (name##_gpio_activestate==0?4:5): \ |
| (name##_gpio_activestate==0?5:4))) |
| |
| #define FTR_GPIO(name, bit) \ |
| static void ftr_gpio_set_##name(struct gpio_runtime *rt, int on)\ |
| { \ |
| int v; \ |
| \ |
| if (unlikely(!rt)) return; \ |
| \ |
| if (name##_mute_gpio < 0) \ |
| return; \ |
| \ |
| v = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, \ |
| name##_mute_gpio, \ |
| 0); \ |
| \ |
| /* muted = !on... */ \ |
| v = SWITCH_GPIO(name##_mute, v, !on); \ |
| \ |
| pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, \ |
| name##_mute_gpio, v); \ |
| \ |
| rt->implementation_private &= ~(1<<bit); \ |
| rt->implementation_private |= (!!on << bit); \ |
| } \ |
| static int ftr_gpio_get_##name(struct gpio_runtime *rt) \ |
| { \ |
| if (unlikely(!rt)) return 0; \ |
| return (rt->implementation_private>>bit)&1; \ |
| } |
| |
| FTR_GPIO(headphone, 0); |
| FTR_GPIO(amp, 1); |
| FTR_GPIO(lineout, 2); |
| |
| static void ftr_gpio_set_hw_reset(struct gpio_runtime *rt, int on) |
| { |
| int v; |
| |
| if (unlikely(!rt)) return; |
| if (hw_reset_gpio < 0) |
| return; |
| |
| v = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, |
| hw_reset_gpio, 0); |
| v = SWITCH_GPIO(hw_reset, v, on); |
| pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, |
| hw_reset_gpio, v); |
| } |
| |
| static void ftr_gpio_all_amps_off(struct gpio_runtime *rt) |
| { |
| int saved; |
| |
| if (unlikely(!rt)) return; |
| saved = rt->implementation_private; |
| ftr_gpio_set_headphone(rt, 0); |
| ftr_gpio_set_amp(rt, 0); |
| ftr_gpio_set_lineout(rt, 0); |
| rt->implementation_private = saved; |
| } |
| |
| static void ftr_gpio_all_amps_restore(struct gpio_runtime *rt) |
| { |
| int s; |
| |
| if (unlikely(!rt)) return; |
| s = rt->implementation_private; |
| ftr_gpio_set_headphone(rt, (s>>0)&1); |
| ftr_gpio_set_amp(rt, (s>>1)&1); |
| ftr_gpio_set_lineout(rt, (s>>2)&1); |
| } |
| |
| static void ftr_handle_notify(void *data) |
| { |
| struct gpio_notification *notif = data; |
| |
| mutex_lock(¬if->mutex); |
| if (notif->notify) |
| notif->notify(notif->data); |
| mutex_unlock(¬if->mutex); |
| } |
| |
| static void gpio_enable_dual_edge(int gpio) |
| { |
| int v; |
| |
| if (gpio == -1) |
| return; |
| v = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio, 0); |
| v |= 0x80; /* enable dual edge */ |
| pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, gpio, v); |
| } |
| |
| static void ftr_gpio_init(struct gpio_runtime *rt) |
| { |
| get_gpio("headphone-mute", NULL, |
| &headphone_mute_gpio, |
| &headphone_mute_gpio_activestate); |
| get_gpio("amp-mute", NULL, |
| &_mute_gpio, |
| &_mute_gpio_activestate); |
| get_gpio("lineout-mute", NULL, |
| &lineout_mute_gpio, |
| &lineout_mute_gpio_activestate); |
| get_gpio("hw-reset", "audio-hw-reset", |
| &hw_reset_gpio, |
| &hw_reset_gpio_activestate); |
| |
| headphone_detect_node = get_gpio("headphone-detect", NULL, |
| &headphone_detect_gpio, |
| &headphone_detect_gpio_activestate); |
| /* go Apple, and thanks for giving these different names |
| * across the board... */ |
| lineout_detect_node = get_gpio("lineout-detect", "line-output-detect", |
| &lineout_detect_gpio, |
| &lineout_detect_gpio_activestate); |
| linein_detect_node = get_gpio("linein-detect", "line-input-detect", |
| &linein_detect_gpio, |
| &linein_detect_gpio_activestate); |
| |
| gpio_enable_dual_edge(headphone_detect_gpio); |
| gpio_enable_dual_edge(lineout_detect_gpio); |
| gpio_enable_dual_edge(linein_detect_gpio); |
| |
| get_irq(headphone_detect_node, &headphone_detect_irq); |
| get_irq(lineout_detect_node, &lineout_detect_irq); |
| get_irq(linein_detect_node, &linein_detect_irq); |
| |
| ftr_gpio_all_amps_off(rt); |
| rt->implementation_private = 0; |
| INIT_WORK(&rt->headphone_notify.work, ftr_handle_notify, |
| &rt->headphone_notify); |
| INIT_WORK(&rt->line_in_notify.work, ftr_handle_notify, |
| &rt->line_in_notify); |
| INIT_WORK(&rt->line_out_notify.work, ftr_handle_notify, |
| &rt->line_out_notify); |
| mutex_init(&rt->headphone_notify.mutex); |
| mutex_init(&rt->line_in_notify.mutex); |
| mutex_init(&rt->line_out_notify.mutex); |
| } |
| |
| static void ftr_gpio_exit(struct gpio_runtime *rt) |
| { |
| ftr_gpio_all_amps_off(rt); |
| rt->implementation_private = 0; |
| if (rt->headphone_notify.notify) |
| free_irq(headphone_detect_irq, &rt->headphone_notify); |
| if (rt->line_in_notify.gpio_private) |
| free_irq(linein_detect_irq, &rt->line_in_notify); |
| if (rt->line_out_notify.gpio_private) |
| free_irq(lineout_detect_irq, &rt->line_out_notify); |
| cancel_delayed_work(&rt->headphone_notify.work); |
| cancel_delayed_work(&rt->line_in_notify.work); |
| cancel_delayed_work(&rt->line_out_notify.work); |
| flush_scheduled_work(); |
| mutex_destroy(&rt->headphone_notify.mutex); |
| mutex_destroy(&rt->line_in_notify.mutex); |
| mutex_destroy(&rt->line_out_notify.mutex); |
| } |
| |
| static irqreturn_t ftr_handle_notify_irq(int xx, |
| void *data, |
| struct pt_regs *regs) |
| { |
| struct gpio_notification *notif = data; |
| |
| schedule_work(¬if->work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ftr_set_notify(struct gpio_runtime *rt, |
| enum notify_type type, |
| notify_func_t notify, |
| void *data) |
| { |
| struct gpio_notification *notif; |
| notify_func_t old; |
| int irq; |
| char *name; |
| int err = -EBUSY; |
| |
| switch (type) { |
| case AOA_NOTIFY_HEADPHONE: |
| notif = &rt->headphone_notify; |
| name = "headphone-detect"; |
| irq = headphone_detect_irq; |
| break; |
| case AOA_NOTIFY_LINE_IN: |
| notif = &rt->line_in_notify; |
| name = "linein-detect"; |
| irq = linein_detect_irq; |
| break; |
| case AOA_NOTIFY_LINE_OUT: |
| notif = &rt->line_out_notify; |
| name = "lineout-detect"; |
| irq = lineout_detect_irq; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (irq == -1) |
| return -ENODEV; |
| |
| mutex_lock(¬if->mutex); |
| |
| old = notif->notify; |
| |
| if (!old && !notify) { |
| err = 0; |
| goto out_unlock; |
| } |
| |
| if (old && notify) { |
| if (old == notify && notif->data == data) |
| err = 0; |
| goto out_unlock; |
| } |
| |
| if (old && !notify) |
| free_irq(irq, notif); |
| |
| if (!old && notify) { |
| err = request_irq(irq, ftr_handle_notify_irq, 0, name, notif); |
| if (err) |
| goto out_unlock; |
| } |
| |
| notif->notify = notify; |
| notif->data = data; |
| |
| err = 0; |
| out_unlock: |
| mutex_unlock(¬if->mutex); |
| return err; |
| } |
| |
| static int ftr_get_detect(struct gpio_runtime *rt, |
| enum notify_type type) |
| { |
| int gpio, ret, active; |
| |
| switch (type) { |
| case AOA_NOTIFY_HEADPHONE: |
| gpio = headphone_detect_gpio; |
| active = headphone_detect_gpio_activestate; |
| break; |
| case AOA_NOTIFY_LINE_IN: |
| gpio = linein_detect_gpio; |
| active = linein_detect_gpio_activestate; |
| break; |
| case AOA_NOTIFY_LINE_OUT: |
| gpio = lineout_detect_gpio; |
| active = lineout_detect_gpio_activestate; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (gpio == -1) |
| return -ENODEV; |
| |
| ret = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, gpio, 0); |
| if (ret < 0) |
| return ret; |
| return ((ret >> 1) & 1) == active; |
| } |
| |
| static struct gpio_methods methods = { |
| .init = ftr_gpio_init, |
| .exit = ftr_gpio_exit, |
| .all_amps_off = ftr_gpio_all_amps_off, |
| .all_amps_restore = ftr_gpio_all_amps_restore, |
| .set_headphone = ftr_gpio_set_headphone, |
| .set_speakers = ftr_gpio_set_amp, |
| .set_lineout = ftr_gpio_set_lineout, |
| .set_hw_reset = ftr_gpio_set_hw_reset, |
| .get_headphone = ftr_gpio_get_headphone, |
| .get_speakers = ftr_gpio_get_amp, |
| .get_lineout = ftr_gpio_get_lineout, |
| .set_notify = ftr_set_notify, |
| .get_detect = ftr_get_detect, |
| }; |
| |
| struct gpio_methods *ftr_gpio_methods = &methods; |
| EXPORT_SYMBOL_GPL(ftr_gpio_methods); |