arch/um/kernel/trap.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
  */

 #include <linux/mm.h>
 #include <linux/sched/signal.h>
 #include <linux/hardirq.h>
 #include <linux/module.h>
 #include <linux/uaccess.h>
 #include <linux/sched/debug.h>
 #include <asm/current.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <arch.h>
 #include <as-layout.h>
 #include <kern_util.h>
 #include <os.h>
 #include <skas.h>

 /*
  * Note this is constrained to return 0, -EFAULT, -EACCES, -ENOMEM by
  * segv().
  */
 int handle_page_fault(unsigned long address, unsigned long ip,
 		      int is_write, int is_user, int *code_out)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	pgd_t *pgd;
 	pud_t *pud;
 	pmd_t *pmd;
 	pte_t *pte;
 	int err = -EFAULT;
 	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;

 	*code_out = SEGV_MAPERR;

 	/*
 	 * If the fault was with pagefaults disabled, don't take the fault, just
 	 * fail.
 	 */
 	if (faulthandler_disabled())
 		goto out_nosemaphore;

 	if (is_user)
 		flags |= FAULT_FLAG_USER;
 retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
 		goto out;
 	else if (vma->vm_start <= address)
 		goto good_area;
 	else if (!(vma->vm_flags & VM_GROWSDOWN))
 		goto out;
 	else if (is_user && !ARCH_IS_STACKGROW(address))
 		goto out;
 	else if (expand_stack(vma, address))
 		goto out;

 good_area:
 	*code_out = SEGV_ACCERR;
 	if (is_write) {
 		if (!(vma->vm_flags & VM_WRITE))
 			goto out;
 		flags |= FAULT_FLAG_WRITE;
 	} else {
 		/* Don't require VM_READ|VM_EXEC for write faults! */
 		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
 			goto out;
 	}

 	do {
 		vm_fault_t fault;

 		fault = handle_mm_fault(vma, address, flags);

 		if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
 			goto out_nosemaphore;

 		if (unlikely(fault & VM_FAULT_ERROR)) {
 			if (fault & VM_FAULT_OOM) {
 				goto out_of_memory;
 			} else if (fault & VM_FAULT_SIGSEGV) {
 				goto out;
 			} else if (fault & VM_FAULT_SIGBUS) {
 				err = -EACCES;
 				goto out;
 			}
 			BUG();
 		}
 		if (flags & FAULT_FLAG_ALLOW_RETRY) {
 			if (fault & VM_FAULT_MAJOR)
 				current->maj_flt++;
 			else
 				current->min_flt++;
 			if (fault & VM_FAULT_RETRY) {
 				flags &= ~FAULT_FLAG_ALLOW_RETRY;
 				flags |= FAULT_FLAG_TRIED;

 				goto retry;
 			}
 		}

 		pgd = pgd_offset(mm, address);
 		pud = pud_offset(pgd, address);
 		pmd = pmd_offset(pud, address);
 		pte = pte_offset_kernel(pmd, address);
 	} while (!pte_present(*pte));
 	err = 0;
 	/*
 	 * The below warning was added in place of
 	 *	pte_mkyoung(); if (is_write) pte_mkdirty();
 	 * If it's triggered, we'd see normally a hang here (a clean pte is
 	 * marked read-only to emulate the dirty bit).
 	 * However, the generic code can mark a PTE writable but clean on a
 	 * concurrent read fault, triggering this harmlessly. So comment it out.
 	 */
 #if 0
 	WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
 #endif
 	flush_tlb_page(vma, address);
 out:
 	up_read(&mm->mmap_sem);
 out_nosemaphore:
 	return err;

 out_of_memory:
 	/*
 	 * We ran out of memory, call the OOM killer, and return the userspace
 	 * (which will retry the fault, or kill us if we got oom-killed).
 	 */
 	up_read(&mm->mmap_sem);
 	if (!is_user)
 		goto out_nosemaphore;
 	pagefault_out_of_memory();
 	return 0;
 }
 EXPORT_SYMBOL(handle_page_fault);

 static void show_segv_info(struct uml_pt_regs *regs)
 {
 	struct task_struct *tsk = current;
 	struct faultinfo *fi = UPT_FAULTINFO(regs);

 	if (!unhandled_signal(tsk, SIGSEGV))
 		return;

 	if (!printk_ratelimit())
 		return;

 	printk("%s%s[%d]: segfault at %lx ip %px sp %px error %x",
 		task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
 		tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
 		(void *)UPT_IP(regs), (void *)UPT_SP(regs),
 		fi->error_code);

 	print_vma_addr(KERN_CONT " in ", UPT_IP(regs));
 	printk(KERN_CONT "\n");
 }

 static void bad_segv(struct faultinfo fi, unsigned long ip)
 {
 	current->thread.arch.faultinfo = fi;
 	force_sig_fault(SIGSEGV, SEGV_ACCERR, (void __user *) FAULT_ADDRESS(fi));
 }

 void fatal_sigsegv(void)
 {
 	force_sigsegv(SIGSEGV);
 	do_signal(&current->thread.regs);
 	/*
 	 * This is to tell gcc that we're not returning - do_signal
 	 * can, in general, return, but in this case, it's not, since
 	 * we just got a fatal SIGSEGV queued.
 	 */
 	os_dump_core();
 }

 /**
  * segv_handler() - the SIGSEGV handler
  * @sig:	the signal number
  * @unused_si:	the signal info struct; unused in this handler
  * @regs:	the ptrace register information
  *
  * The handler first extracts the faultinfo from the UML ptrace regs struct.
  * If the userfault did not happen in an UML userspace process, bad_segv is called.
  * Otherwise the signal did happen in a cloned userspace process, handle it.
  */
 void segv_handler(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
 {
 	struct faultinfo * fi = UPT_FAULTINFO(regs);

 	if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) {
 		show_segv_info(regs);
 		bad_segv(*fi, UPT_IP(regs));
 		return;
 	}
 	segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
 }

 /*
  * We give a *copy* of the faultinfo in the regs to segv.
  * This must be done, since nesting SEGVs could overwrite
  * the info in the regs. A pointer to the info then would
  * give us bad data!
  */
 unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
 		   struct uml_pt_regs *regs)
 {
 	jmp_buf *catcher;
 	int si_code;
 	int err;
 	int is_write = FAULT_WRITE(fi);
 	unsigned long address = FAULT_ADDRESS(fi);

 	if (!is_user && regs)
 		current->thread.segv_regs = container_of(regs, struct pt_regs, regs);

 	if (!is_user && (address >= start_vm) && (address < end_vm)) {
 		flush_tlb_kernel_vm();
 		goto out;
 	}
 	else if (current->mm == NULL) {
 		show_regs(container_of(regs, struct pt_regs, regs));
 		panic("Segfault with no mm");
 	}
 	else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) {
 		show_regs(container_of(regs, struct pt_regs, regs));
 		panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx",
 		       address, ip);
 	}

 	if (SEGV_IS_FIXABLE(&fi))
 		err = handle_page_fault(address, ip, is_write, is_user,
 					&si_code);
 	else {
 		err = -EFAULT;
 		/*
 		 * A thread accessed NULL, we get a fault, but CR2 is invalid.
 		 * This code is used in __do_copy_from_user() of TT mode.
 		 * XXX tt mode is gone, so maybe this isn't needed any more
 		 */
 		address = 0;
 	}

 	catcher = current->thread.fault_catcher;
 	if (!err)
 		goto out;
 	else if (catcher != NULL) {
 		current->thread.fault_addr = (void *) address;
 		UML_LONGJMP(catcher, 1);
 	}
 	else if (current->thread.fault_addr != NULL)
 		panic("fault_addr set but no fault catcher");
 	else if (!is_user && arch_fixup(ip, regs))
 		goto out;

 	if (!is_user) {
 		show_regs(container_of(regs, struct pt_regs, regs));
 		panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
 		      address, ip);
 	}

 	show_segv_info(regs);

 	if (err == -EACCES) {
 		current->thread.arch.faultinfo = fi;
 		force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
 	} else {
 		BUG_ON(err != -EFAULT);
 		current->thread.arch.faultinfo = fi;
 		force_sig_fault(SIGSEGV, si_code, (void __user *) address);
 	}

 out:
 	if (regs)
 		current->thread.segv_regs = NULL;

 	return 0;
 }

 void relay_signal(int sig, struct siginfo *si, struct uml_pt_regs *regs)
 {
 	int code, err;
 	if (!UPT_IS_USER(regs)) {
 		if (sig == SIGBUS)
 			printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
 			       "mount likely just ran out of space\n");
 		panic("Kernel mode signal %d", sig);
 	}

 	arch_examine_signal(sig, regs);

 	/* Is the signal layout for the signal known?
 	 * Signal data must be scrubbed to prevent information leaks.
 	 */
 	code = si->si_code;
 	err = si->si_errno;
 	if ((err == 0) && (siginfo_layout(sig, code) == SIL_FAULT)) {
 		struct faultinfo *fi = UPT_FAULTINFO(regs);
 		current->thread.arch.faultinfo = *fi;
 		force_sig_fault(sig, code, (void __user *)FAULT_ADDRESS(*fi));
 	} else {
 		printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d) with errno %d\n",
 		       sig, code, err);
 		force_sig(sig);
 	}
 }

 void bus_handler(int sig, struct siginfo *si, struct uml_pt_regs *regs)
 {
 	if (current->thread.fault_catcher != NULL)
 		UML_LONGJMP(current->thread.fault_catcher, 1);
 	else
 		relay_signal(sig, si, regs);
 }

 void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
 {
 	do_IRQ(WINCH_IRQ, regs);
 }

 void trap_init(void)
 {
 }
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
	*/

	#include <linux/mm.h>
	#include <linux/sched/signal.h>
	#include <linux/hardirq.h>
	#include <linux/module.h>
	#include <linux/uaccess.h>
	#include <linux/sched/debug.h>
	#include <asm/current.h>
	#include <asm/pgtable.h>
	#include <asm/tlbflush.h>
	#include <arch.h>
	#include <as-layout.h>
	#include <kern_util.h>
	#include <os.h>
	#include <skas.h>

	/*
	* Note this is constrained to return 0, -EFAULT, -EACCES, -ENOMEM by
	* segv().
	*/
	int handle_page_fault(unsigned long address, unsigned long ip,
	int is_write, int is_user, int *code_out)
	{
	struct mm_struct *mm = current->mm;
	struct vm_area_struct *vma;
	pgd_t *pgd;
	pud_t *pud;
	pmd_t *pmd;
	pte_t *pte;
	int err = -EFAULT;
	unsigned int flags = FAULT_FLAG_ALLOW_RETRY \| FAULT_FLAG_KILLABLE;

	*code_out = SEGV_MAPERR;

	/*
	* If the fault was with pagefaults disabled, don't take the fault, just
	* fail.
	*/
	if (faulthandler_disabled())
	goto out_nosemaphore;

	if (is_user)
	flags \|= FAULT_FLAG_USER;
	retry:
	down_read(&mm->mmap_sem);
	vma = find_vma(mm, address);
	if (!vma)
	goto out;
	else if (vma->vm_start <= address)
	goto good_area;
	else if (!(vma->vm_flags & VM_GROWSDOWN))
	goto out;
	else if (is_user && !ARCH_IS_STACKGROW(address))
	goto out;
	else if (expand_stack(vma, address))
	goto out;

	good_area:
	*code_out = SEGV_ACCERR;
	if (is_write) {
	if (!(vma->vm_flags & VM_WRITE))
	goto out;
	flags \|= FAULT_FLAG_WRITE;
	} else {
	/* Don't require VM_READ\|VM_EXEC for write faults! */
	if (!(vma->vm_flags & (VM_READ \| VM_EXEC)))
	goto out;
	}

	do {
	vm_fault_t fault;

	fault = handle_mm_fault(vma, address, flags);

	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
	goto out_nosemaphore;

	if (unlikely(fault & VM_FAULT_ERROR)) {
	if (fault & VM_FAULT_OOM) {
	goto out_of_memory;
	} else if (fault & VM_FAULT_SIGSEGV) {
	goto out;
	} else if (fault & VM_FAULT_SIGBUS) {
	err = -EACCES;
	goto out;
	}
	BUG();
	}
	if (flags & FAULT_FLAG_ALLOW_RETRY) {
	if (fault & VM_FAULT_MAJOR)
	current->maj_flt++;
	else
	current->min_flt++;
	if (fault & VM_FAULT_RETRY) {
	flags &= ~FAULT_FLAG_ALLOW_RETRY;
	flags \|= FAULT_FLAG_TRIED;

	goto retry;
	}
	}

	pgd = pgd_offset(mm, address);
	pud = pud_offset(pgd, address);
	pmd = pmd_offset(pud, address);
	pte = pte_offset_kernel(pmd, address);
	} while (!pte_present(*pte));
	err = 0;
	/*
	* The below warning was added in place of
	* pte_mkyoung(); if (is_write) pte_mkdirty();
	* If it's triggered, we'd see normally a hang here (a clean pte is
	* marked read-only to emulate the dirty bit).
	* However, the generic code can mark a PTE writable but clean on a
	* concurrent read fault, triggering this harmlessly. So comment it out.
	*/
	#if 0
	WARN_ON(!pte_young(pte) \|\| (is_write && !pte_dirty(pte)));
	#endif
	flush_tlb_page(vma, address);
	out:
	up_read(&mm->mmap_sem);
	out_nosemaphore:
	return err;

	out_of_memory:
	/*
	* We ran out of memory, call the OOM killer, and return the userspace
	* (which will retry the fault, or kill us if we got oom-killed).
	*/
	up_read(&mm->mmap_sem);
	if (!is_user)
	goto out_nosemaphore;
	pagefault_out_of_memory();
	return 0;
	}
	EXPORT_SYMBOL(handle_page_fault);

	static void show_segv_info(struct uml_pt_regs *regs)
	{
	struct task_struct *tsk = current;
	struct faultinfo *fi = UPT_FAULTINFO(regs);

	if (!unhandled_signal(tsk, SIGSEGV))
	return;

	if (!printk_ratelimit())
	return;

	printk("%s%s[%d]: segfault at %lx ip %px sp %px error %x",
	task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
	tsk->comm, task_pid_nr(tsk), FAULT_ADDRESS(*fi),
	(void )UPT_IP(regs), (void )UPT_SP(regs),
	fi->error_code);

	print_vma_addr(KERN_CONT " in ", UPT_IP(regs));
	printk(KERN_CONT "\n");
	}

	static void bad_segv(struct faultinfo fi, unsigned long ip)
	{
	current->thread.arch.faultinfo = fi;
	force_sig_fault(SIGSEGV, SEGV_ACCERR, (void __user *) FAULT_ADDRESS(fi));
	}

	void fatal_sigsegv(void)
	{
	force_sigsegv(SIGSEGV);
	do_signal(&current->thread.regs);
	/*
	* This is to tell gcc that we're not returning - do_signal
	* can, in general, return, but in this case, it's not, since
	* we just got a fatal SIGSEGV queued.
	*/
	os_dump_core();
	}

	/**
	* segv_handler() - the SIGSEGV handler
	* @sig: the signal number
	* @unused_si: the signal info struct; unused in this handler
	* @regs: the ptrace register information
	*
	* The handler first extracts the faultinfo from the UML ptrace regs struct.
	* If the userfault did not happen in an UML userspace process, bad_segv is called.
	* Otherwise the signal did happen in a cloned userspace process, handle it.
	*/
	void segv_handler(int sig, struct siginfo unused_si, struct uml_pt_regs regs)
	{
	struct faultinfo * fi = UPT_FAULTINFO(regs);

	if (UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)) {
	show_segv_info(regs);
	bad_segv(*fi, UPT_IP(regs));
	return;
	}
	segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
	}

	/*
	* We give a copy of the faultinfo in the regs to segv.
	* This must be done, since nesting SEGVs could overwrite
	* the info in the regs. A pointer to the info then would
	* give us bad data!
	*/
	unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user,
	struct uml_pt_regs *regs)
	{
	jmp_buf *catcher;
	int si_code;
	int err;
	int is_write = FAULT_WRITE(fi);
	unsigned long address = FAULT_ADDRESS(fi);

	if (!is_user && regs)
	current->thread.segv_regs = container_of(regs, struct pt_regs, regs);

	if (!is_user && (address >= start_vm) && (address < end_vm)) {
	flush_tlb_kernel_vm();
	goto out;
	}
	else if (current->mm == NULL) {
	show_regs(container_of(regs, struct pt_regs, regs));
	panic("Segfault with no mm");
	}
	else if (!is_user && address > PAGE_SIZE && address < TASK_SIZE) {
	show_regs(container_of(regs, struct pt_regs, regs));
	panic("Kernel tried to access user memory at addr 0x%lx, ip 0x%lx",
	address, ip);
	}

	if (SEGV_IS_FIXABLE(&fi))
	err = handle_page_fault(address, ip, is_write, is_user,
	&si_code);
	else {
	err = -EFAULT;
	/*
	* A thread accessed NULL, we get a fault, but CR2 is invalid.
	* This code is used in __do_copy_from_user() of TT mode.
	* XXX tt mode is gone, so maybe this isn't needed any more
	*/
	address = 0;
	}

	catcher = current->thread.fault_catcher;
	if (!err)
	goto out;
	else if (catcher != NULL) {
	current->thread.fault_addr = (void *) address;
	UML_LONGJMP(catcher, 1);
	}
	else if (current->thread.fault_addr != NULL)
	panic("fault_addr set but no fault catcher");
	else if (!is_user && arch_fixup(ip, regs))
	goto out;

	if (!is_user) {
	show_regs(container_of(regs, struct pt_regs, regs));
	panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
	address, ip);
	}

	show_segv_info(regs);

	if (err == -EACCES) {
	current->thread.arch.faultinfo = fi;
	force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
	} else {
	BUG_ON(err != -EFAULT);
	current->thread.arch.faultinfo = fi;
	force_sig_fault(SIGSEGV, si_code, (void __user *) address);
	}

	out:
	if (regs)
	current->thread.segv_regs = NULL;

	return 0;
	}

	void relay_signal(int sig, struct siginfo si, struct uml_pt_regs regs)
	{
	int code, err;
	if (!UPT_IS_USER(regs)) {
	if (sig == SIGBUS)
	printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
	"mount likely just ran out of space\n");
	panic("Kernel mode signal %d", sig);
	}

	arch_examine_signal(sig, regs);

	/* Is the signal layout for the signal known?
	* Signal data must be scrubbed to prevent information leaks.
	*/
	code = si->si_code;
	err = si->si_errno;
	if ((err == 0) && (siginfo_layout(sig, code) == SIL_FAULT)) {
	struct faultinfo *fi = UPT_FAULTINFO(regs);
	current->thread.arch.faultinfo = *fi;
	force_sig_fault(sig, code, (void __user )FAULT_ADDRESS(fi));
	} else {
	printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d) with errno %d\n",
	sig, code, err);
	force_sig(sig);
	}
	}

	void bus_handler(int sig, struct siginfo si, struct uml_pt_regs regs)
	{
	if (current->thread.fault_catcher != NULL)
	UML_LONGJMP(current->thread.fault_catcher, 1);
	else
	relay_signal(sig, si, regs);
	}

	void winch(int sig, struct siginfo unused_si, struct uml_pt_regs regs)
	{
	do_IRQ(WINCH_IRQ, regs);
	}

	void trap_init(void)
	{
	}