Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/input/fsl,mpr121-touchkey.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Freescale MPR121 capacitive touch sensor controller

maintainers:
  - Dmitry Torokhov <dmitry.torokhov@gmail.com>

description: |
  The MPR121 supports up to 12 completely independent electrodes/capacitance
  sensing inputs in which 8 are multifunctional for LED driving and GPIO.
  https://www.nxp.com/docs/en/data-sheet/MPR121.pdf

allOf:
  - $ref: input.yaml#

anyOf:
  - required: [ interrupts ]
  - required: [ poll-interval ]

properties:
  compatible:
    const: fsl,mpr121-touchkey

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  vdd-supply:
    maxItems: 1

  linux,keycodes:
    minItems: 1
    maxItems: 12

  wakeup-source:
    description: Use any event on keypad as wakeup event.
    type: boolean

required:
  - compatible
  - reg
  - vdd-supply
  - linux,keycodes

unevaluatedProperties: false

examples:
  - |
    // Example with interrupts
    #include "dt-bindings/input/input.h"
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        mpr121@5a {
            compatible = "fsl,mpr121-touchkey";
            reg = <0x5a>;
            interrupt-parent = <&gpio1>;
            interrupts = <28 2>;
            autorepeat;
            vdd-supply = <&ldo4_reg>;
            linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
                             <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>,
                             <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
        };
    };

  - |
    // Example with polling
    #include "dt-bindings/input/input.h"
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        mpr121@5a {
            compatible = "fsl,mpr121-touchkey";
            reg = <0x5a>;
            poll-interval = <20>;
            autorepeat;
            vdd-supply = <&ldo4_reg>;
            linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
                             <KEY_4>, <KEY_5>, <KEY_6>, <KEY_7>,
                             <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
        };
    };