| // SPDX-License-Identifier: GPL-2.0+ |
| // |
| // Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include "imx25-pinfunc.h" |
| |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| /* |
| * The decompressor and also some bootloaders rely on a |
| * pre-existing /chosen node to be available to insert the |
| * command line and merge other ATAGS info. |
| */ |
| chosen {}; |
| |
| aliases { |
| ethernet0 = &fec; |
| gpio0 = &gpio1; |
| gpio1 = &gpio2; |
| gpio2 = &gpio3; |
| gpio3 = &gpio4; |
| i2c0 = &i2c1; |
| i2c1 = &i2c2; |
| i2c2 = &i2c3; |
| mmc0 = &esdhc1; |
| mmc1 = &esdhc2; |
| pwm0 = &pwm1; |
| pwm1 = &pwm2; |
| pwm2 = &pwm3; |
| pwm3 = &pwm4; |
| serial0 = &uart1; |
| serial1 = &uart2; |
| serial2 = &uart3; |
| serial3 = &uart4; |
| serial4 = &uart5; |
| spi0 = &spi1; |
| spi1 = &spi2; |
| spi2 = &spi3; |
| usb0 = &usbotg; |
| usb1 = &usbhost1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,arm926ej-s"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| }; |
| |
| asic: asic-interrupt-controller@68000000 { |
| compatible = "fsl,imx25-asic", "fsl,avic"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| reg = <0x68000000 0x8000000>; |
| }; |
| |
| clocks { |
| osc { |
| compatible = "fsl,imx-osc", "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <24000000>; |
| }; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&asic>; |
| ranges; |
| |
| bus@43f00000 { /* AIPS1 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x43f00000 0x100000>; |
| ranges; |
| |
| aips1: bridge@43f00000 { |
| compatible = "fsl,imx25-aips"; |
| reg = <0x43f00000 0x4000>; |
| }; |
| |
| i2c1: i2c@43f80000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; |
| reg = <0x43f80000 0x4000>; |
| clocks = <&clks 48>; |
| clock-names = ""; |
| interrupts = <3>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@43f84000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; |
| reg = <0x43f84000 0x4000>; |
| clocks = <&clks 48>; |
| clock-names = ""; |
| interrupts = <10>; |
| status = "disabled"; |
| }; |
| |
| can1: can@43f88000 { |
| compatible = "fsl,imx25-flexcan"; |
| reg = <0x43f88000 0x4000>; |
| interrupts = <43>; |
| clocks = <&clks 75>, <&clks 75>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| can2: can@43f8c000 { |
| compatible = "fsl,imx25-flexcan"; |
| reg = <0x43f8c000 0x4000>; |
| interrupts = <44>; |
| clocks = <&clks 76>, <&clks 76>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@43f90000 { |
| compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| reg = <0x43f90000 0x4000>; |
| interrupts = <45>; |
| clocks = <&clks 120>, <&clks 57>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@43f94000 { |
| compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| reg = <0x43f94000 0x4000>; |
| interrupts = <32>; |
| clocks = <&clks 121>, <&clks 57>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@43f98000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; |
| reg = <0x43f98000 0x4000>; |
| clocks = <&clks 48>; |
| clock-names = ""; |
| interrupts = <4>; |
| status = "disabled"; |
| }; |
| |
| owire@43f9c000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x43f9c000 0x4000>; |
| clocks = <&clks 51>; |
| clock-names = ""; |
| interrupts = <2>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@43fa4000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; |
| reg = <0x43fa4000 0x4000>; |
| clocks = <&clks 78>, <&clks 78>; |
| clock-names = "ipg", "per"; |
| interrupts = <14>; |
| status = "disabled"; |
| }; |
| |
| kpp: kpp@43fa8000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx25-kpp", "fsl,imx21-kpp"; |
| reg = <0x43fa8000 0x4000>; |
| clocks = <&clks 102>; |
| clock-names = ""; |
| interrupts = <24>; |
| status = "disabled"; |
| }; |
| |
| iomuxc: iomuxc@43fac000 { |
| compatible = "fsl,imx25-iomuxc"; |
| reg = <0x43fac000 0x4000>; |
| }; |
| |
| audmux: audmux@43fb0000 { |
| compatible = "fsl,imx25-audmux", "fsl,imx31-audmux"; |
| reg = <0x43fb0000 0x4000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| spba@50000000 { |
| compatible = "fsl,spba-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x50000000 0x40000>; |
| ranges; |
| |
| spi3: spi@50004000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; |
| reg = <0x50004000 0x4000>; |
| interrupts = <0>; |
| clocks = <&clks 80>, <&clks 80>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@50008000 { |
| compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| reg = <0x50008000 0x4000>; |
| interrupts = <5>; |
| clocks = <&clks 123>, <&clks 57>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@5000c000 { |
| compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| reg = <0x5000c000 0x4000>; |
| interrupts = <18>; |
| clocks = <&clks 122>, <&clks 57>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@50010000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; |
| reg = <0x50010000 0x4000>; |
| clocks = <&clks 79>, <&clks 79>; |
| clock-names = "ipg", "per"; |
| interrupts = <13>; |
| status = "disabled"; |
| }; |
| |
| ssi2: ssi@50014000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; |
| reg = <0x50014000 0x4000>; |
| interrupts = <11>; |
| clocks = <&clks 118>; |
| clock-names = "ipg"; |
| dmas = <&sdma 24 1 0>, |
| <&sdma 25 1 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| status = "disabled"; |
| }; |
| |
| esai@50018000 { |
| reg = <0x50018000 0x4000>; |
| interrupts = <7>; |
| }; |
| |
| uart5: serial@5002c000 { |
| compatible = "fsl,imx25-uart", "fsl,imx21-uart"; |
| reg = <0x5002c000 0x4000>; |
| interrupts = <40>; |
| clocks = <&clks 124>, <&clks 57>; |
| clock-names = "ipg", "per"; |
| status = "disabled"; |
| }; |
| |
| tscadc: tscadc@50030000 { |
| compatible = "fsl,imx25-tsadc"; |
| reg = <0x50030000 0xc>; |
| interrupts = <46>; |
| clocks = <&clks 119>; |
| clock-names = "ipg"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| status = "disabled"; |
| ranges; |
| |
| adc: adc@50030800 { |
| compatible = "fsl,imx25-gcq"; |
| reg = <0x50030800 0x60>; |
| interrupt-parent = <&tscadc>; |
| interrupts = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| tsc: tcq@50030400 { |
| compatible = "fsl,imx25-tcq"; |
| reg = <0x50030400 0x60>; |
| interrupt-parent = <&tscadc>; |
| interrupts = <0>; |
| fsl,wires = <4>; |
| status = "disabled"; |
| }; |
| }; |
| |
| ssi1: ssi@50034000 { |
| #sound-dai-cells = <0>; |
| compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; |
| reg = <0x50034000 0x4000>; |
| interrupts = <12>; |
| clocks = <&clks 117>; |
| clock-names = "ipg"; |
| dmas = <&sdma 28 1 0>, |
| <&sdma 29 1 0>; |
| dma-names = "rx", "tx"; |
| fsl,fifo-depth = <15>; |
| status = "disabled"; |
| }; |
| |
| fec: ethernet@50038000 { |
| compatible = "fsl,imx25-fec"; |
| reg = <0x50038000 0x4000>; |
| interrupts = <57>; |
| clocks = <&clks 88>, <&clks 65>; |
| clock-names = "ipg", "ahb"; |
| status = "disabled"; |
| }; |
| }; |
| |
| bus@53f00000 { /* AIPS2 */ |
| compatible = "fsl,aips-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x53f00000 0x100000>; |
| ranges; |
| |
| aips2: bridge@53f00000 { |
| compatible = "fsl,imx25-aips"; |
| reg = <0x53f00000 0x4000>; |
| }; |
| |
| clks: ccm@53f80000 { |
| compatible = "fsl,imx25-ccm"; |
| reg = <0x53f80000 0x4000>; |
| interrupts = <31>; |
| #clock-cells = <1>; |
| }; |
| |
| gpt4: timer@53f84000 { |
| compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; |
| reg = <0x53f84000 0x4000>; |
| clocks = <&clks 95>, <&clks 47>; |
| clock-names = "ipg", "per"; |
| interrupts = <1>; |
| }; |
| |
| gpt3: timer@53f88000 { |
| compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; |
| reg = <0x53f88000 0x4000>; |
| clocks = <&clks 94>, <&clks 47>; |
| clock-names = "ipg", "per"; |
| interrupts = <29>; |
| }; |
| |
| gpt2: timer@53f8c000 { |
| compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; |
| reg = <0x53f8c000 0x4000>; |
| clocks = <&clks 93>, <&clks 47>; |
| clock-names = "ipg", "per"; |
| interrupts = <53>; |
| }; |
| |
| gpt1: timer@53f90000 { |
| compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; |
| reg = <0x53f90000 0x4000>; |
| clocks = <&clks 92>, <&clks 47>; |
| clock-names = "ipg", "per"; |
| interrupts = <54>; |
| }; |
| |
| epit1: timer@53f94000 { |
| compatible = "fsl,imx25-epit"; |
| reg = <0x53f94000 0x4000>; |
| clocks = <&clks 83>, <&clks 43>; |
| clock-names = "ipg", "per"; |
| interrupts = <28>; |
| }; |
| |
| epit2: timer@53f98000 { |
| compatible = "fsl,imx25-epit"; |
| reg = <0x53f98000 0x4000>; |
| clocks = <&clks 84>, <&clks 43>; |
| clock-names = "ipg", "per"; |
| interrupts = <27>; |
| }; |
| |
| gpio4: gpio@53f9c000 { |
| compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; |
| reg = <0x53f9c000 0x4000>; |
| interrupts = <23>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pwm2: pwm@53fa0000 { |
| compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x53fa0000 0x4000>; |
| clocks = <&clks 106>, <&clks 52>; |
| clock-names = "ipg", "per"; |
| interrupts = <36>; |
| }; |
| |
| gpio3: gpio@53fa4000 { |
| compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; |
| reg = <0x53fa4000 0x4000>; |
| interrupts = <16>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| pwm3: pwm@53fa8000 { |
| compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x53fa8000 0x4000>; |
| clocks = <&clks 107>, <&clks 52>; |
| clock-names = "ipg", "per"; |
| interrupts = <41>; |
| }; |
| |
| scc: crypto@53fac000 { |
| compatible = "fsl,imx25-scc"; |
| reg = <0x53fac000 0x4000>; |
| clocks = <&clks 111>; |
| clock-names = "ipg"; |
| interrupts = <49>, <50>; |
| interrupt-names = "scm", "smn"; |
| }; |
| |
| rngb: rngb@53fb0000 { |
| compatible = "fsl,imx25-rngb"; |
| reg = <0x53fb0000 0x4000>; |
| clocks = <&clks 109>; |
| interrupts = <22>; |
| }; |
| |
| esdhc1: mmc@53fb4000 { |
| compatible = "fsl,imx25-esdhc"; |
| reg = <0x53fb4000 0x4000>; |
| interrupts = <9>; |
| clocks = <&clks 86>, <&clks 63>, <&clks 45>; |
| clock-names = "ipg", "ahb", "per"; |
| status = "disabled"; |
| }; |
| |
| esdhc2: mmc@53fb8000 { |
| compatible = "fsl,imx25-esdhc"; |
| reg = <0x53fb8000 0x4000>; |
| interrupts = <8>; |
| clocks = <&clks 87>, <&clks 64>, <&clks 46>; |
| clock-names = "ipg", "ahb", "per"; |
| status = "disabled"; |
| }; |
| |
| lcdc: lcdc@53fbc000 { |
| compatible = "fsl,imx25-fb", "fsl,imx21-fb"; |
| reg = <0x53fbc000 0x4000>; |
| interrupts = <39>; |
| clocks = <&clks 103>, <&clks 66>, <&clks 49>; |
| clock-names = "ipg", "ahb", "per"; |
| status = "disabled"; |
| }; |
| |
| slcdc@53fc0000 { |
| reg = <0x53fc0000 0x4000>; |
| interrupts = <38>; |
| status = "disabled"; |
| }; |
| |
| pwm4: pwm@53fc8000 { |
| compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x53fc8000 0x4000>; |
| clocks = <&clks 108>, <&clks 52>; |
| clock-names = "ipg", "per"; |
| interrupts = <42>; |
| }; |
| |
| gpio1: gpio@53fcc000 { |
| compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; |
| reg = <0x53fcc000 0x4000>; |
| interrupts = <52>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| gpio2: gpio@53fd0000 { |
| compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; |
| reg = <0x53fd0000 0x4000>; |
| interrupts = <51>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| |
| sdma: sdma@53fd4000 { |
| compatible = "fsl,imx25-sdma"; |
| reg = <0x53fd4000 0x4000>; |
| clocks = <&clks 112>, <&clks 68>; |
| clock-names = "ipg", "ahb"; |
| #dma-cells = <3>; |
| interrupts = <34>; |
| fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin"; |
| }; |
| |
| wdog@53fdc000 { |
| compatible = "fsl,imx25-wdt", "fsl,imx21-wdt"; |
| reg = <0x53fdc000 0x4000>; |
| clocks = <&clks 126>; |
| clock-names = ""; |
| interrupts = <55>; |
| }; |
| |
| pwm1: pwm@53fe0000 { |
| compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; |
| #pwm-cells = <3>; |
| reg = <0x53fe0000 0x4000>; |
| clocks = <&clks 105>, <&clks 52>; |
| clock-names = "ipg", "per"; |
| interrupts = <26>; |
| }; |
| |
| iim: efuse@53ff0000 { |
| compatible = "fsl,imx25-iim", "fsl,imx27-iim"; |
| reg = <0x53ff0000 0x4000>; |
| interrupts = <19>; |
| clocks = <&clks 99>; |
| }; |
| |
| usbotg: usb@53ff4000 { |
| compatible = "fsl,imx25-usb", "fsl,imx27-usb"; |
| reg = <0x53ff4000 0x0200>; |
| interrupts = <37>; |
| clocks = <&clks 9>, <&clks 70>, <&clks 8>; |
| clock-names = "ipg", "ahb", "per"; |
| fsl,usbmisc = <&usbmisc 0>; |
| fsl,usbphy = <&usbphy0>; |
| phy_type = "utmi"; |
| dr_mode = "otg"; |
| status = "disabled"; |
| }; |
| |
| usbhost1: usb@53ff4400 { |
| compatible = "fsl,imx25-usb", "fsl,imx27-usb"; |
| reg = <0x53ff4400 0x0200>; |
| interrupts = <35>; |
| clocks = <&clks 9>, <&clks 70>, <&clks 8>; |
| clock-names = "ipg", "ahb", "per"; |
| fsl,usbmisc = <&usbmisc 1>; |
| fsl,usbphy = <&usbphy1>; |
| maximum-speed = "full-speed"; |
| phy_type = "serial"; |
| dr_mode = "host"; |
| status = "disabled"; |
| }; |
| |
| usbmisc: usbmisc@53ff4600 { |
| #index-cells = <1>; |
| compatible = "fsl,imx25-usbmisc"; |
| reg = <0x53ff4600 0x00f>; |
| }; |
| |
| dryice@53ffc000 { |
| compatible = "fsl,imx25-dryice", "fsl,imx25-rtc"; |
| reg = <0x53ffc000 0x4000>; |
| clocks = <&clks 81>; |
| clock-names = "ipg"; |
| interrupts = <25 56>; |
| }; |
| }; |
| |
| iram: sram@78000000 { |
| compatible = "mmio-sram"; |
| reg = <0x78000000 0x20000>; |
| }; |
| |
| emi@80000000 { |
| compatible = "fsl,emi-bus", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x80000000 0x3b002000>; |
| ranges; |
| |
| nfc: nand@bb000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| compatible = "fsl,imx25-nand"; |
| reg = <0xbb000000 0x2000>; |
| clocks = <&clks 50>; |
| clock-names = ""; |
| interrupts = <33>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| usbphy { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| usbphy0: usb-phy@0 { |
| reg = <0>; |
| compatible = "usb-nop-xceiv"; |
| #phy-cells = <0>; |
| }; |
| |
| usbphy1: usb-phy@1 { |
| reg = <1>; |
| compatible = "usb-nop-xceiv"; |
| #phy-cells = <0>; |
| }; |
| }; |
| }; |