| /* |
| * atmel_wm8904 - Atmel ASoC driver for boards with WM8904 codec. |
| * |
| * Copyright (C) 2012 Atmel |
| * |
| * Author: Bo Shen <voice.shen@atmel.com> |
| * |
| * GPLv2 or later |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| |
| #include <sound/soc.h> |
| |
| #include "../codecs/wm8904.h" |
| #include "atmel_ssc_dai.h" |
| |
| static const struct snd_soc_dapm_widget atmel_asoc_wm8904_dapm_widgets[] = { |
| SND_SOC_DAPM_HP("Headphone Jack", NULL), |
| SND_SOC_DAPM_MIC("Mic", NULL), |
| SND_SOC_DAPM_LINE("Line In Jack", NULL), |
| }; |
| |
| static int atmel_asoc_wm8904_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_dai *codec_dai = rtd->codec_dai; |
| int ret; |
| |
| ret = snd_soc_dai_set_pll(codec_dai, WM8904_FLL_MCLK, WM8904_FLL_MCLK, |
| 32768, params_rate(params) * 256); |
| if (ret < 0) { |
| pr_err("%s - failed to set wm8904 codec PLL.", __func__); |
| return ret; |
| } |
| |
| /* |
| * As here wm8904 use FLL output as its system clock |
| * so calling set_sysclk won't care freq parameter |
| * then we pass 0 |
| */ |
| ret = snd_soc_dai_set_sysclk(codec_dai, WM8904_CLK_FLL, |
| 0, SND_SOC_CLOCK_IN); |
| if (ret < 0) { |
| pr_err("%s -failed to set wm8904 SYSCLK\n", __func__); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static struct snd_soc_ops atmel_asoc_wm8904_ops = { |
| .hw_params = atmel_asoc_wm8904_hw_params, |
| }; |
| |
| static struct snd_soc_dai_link atmel_asoc_wm8904_dailink = { |
| .name = "WM8904", |
| .stream_name = "WM8904 PCM", |
| .codec_dai_name = "wm8904-hifi", |
| .dai_fmt = SND_SOC_DAIFMT_I2S |
| | SND_SOC_DAIFMT_NB_NF |
| | SND_SOC_DAIFMT_CBM_CFM, |
| .ops = &atmel_asoc_wm8904_ops, |
| }; |
| |
| static struct snd_soc_card atmel_asoc_wm8904_card = { |
| .name = "atmel_asoc_wm8904", |
| .owner = THIS_MODULE, |
| .dai_link = &atmel_asoc_wm8904_dailink, |
| .num_links = 1, |
| .dapm_widgets = atmel_asoc_wm8904_dapm_widgets, |
| .num_dapm_widgets = ARRAY_SIZE(atmel_asoc_wm8904_dapm_widgets), |
| .fully_routed = true, |
| }; |
| |
| static int atmel_asoc_wm8904_dt_init(struct platform_device *pdev) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| struct device_node *codec_np, *cpu_np; |
| struct snd_soc_card *card = &atmel_asoc_wm8904_card; |
| struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink; |
| int ret; |
| |
| if (!np) { |
| dev_err(&pdev->dev, "only device tree supported\n"); |
| return -EINVAL; |
| } |
| |
| ret = snd_soc_of_parse_card_name(card, "atmel,model"); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to parse card name\n"); |
| return ret; |
| } |
| |
| ret = snd_soc_of_parse_audio_routing(card, "atmel,audio-routing"); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to parse audio routing\n"); |
| return ret; |
| } |
| |
| cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0); |
| if (!cpu_np) { |
| dev_err(&pdev->dev, "failed to get dai and pcm info\n"); |
| ret = -EINVAL; |
| return ret; |
| } |
| dailink->cpu_of_node = cpu_np; |
| dailink->platform_of_node = cpu_np; |
| of_node_put(cpu_np); |
| |
| codec_np = of_parse_phandle(np, "atmel,audio-codec", 0); |
| if (!codec_np) { |
| dev_err(&pdev->dev, "failed to get codec info\n"); |
| ret = -EINVAL; |
| return ret; |
| } |
| dailink->codec_of_node = codec_np; |
| of_node_put(codec_np); |
| |
| return 0; |
| } |
| |
| static int atmel_asoc_wm8904_probe(struct platform_device *pdev) |
| { |
| struct snd_soc_card *card = &atmel_asoc_wm8904_card; |
| struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink; |
| int id, ret; |
| |
| card->dev = &pdev->dev; |
| ret = atmel_asoc_wm8904_dt_init(pdev); |
| if (ret) { |
| dev_err(&pdev->dev, "failed to init dt info\n"); |
| return ret; |
| } |
| |
| id = of_alias_get_id((struct device_node *)dailink->cpu_of_node, "ssc"); |
| ret = atmel_ssc_set_audio(id); |
| if (ret != 0) { |
| dev_err(&pdev->dev, "failed to set SSC %d for audio\n", id); |
| return ret; |
| } |
| |
| ret = snd_soc_register_card(card); |
| if (ret) { |
| dev_err(&pdev->dev, "snd_soc_register_card failed\n"); |
| goto err_set_audio; |
| } |
| |
| return 0; |
| |
| err_set_audio: |
| atmel_ssc_put_audio(id); |
| return ret; |
| } |
| |
| static int atmel_asoc_wm8904_remove(struct platform_device *pdev) |
| { |
| struct snd_soc_card *card = platform_get_drvdata(pdev); |
| struct snd_soc_dai_link *dailink = &atmel_asoc_wm8904_dailink; |
| int id; |
| |
| id = of_alias_get_id((struct device_node *)dailink->cpu_of_node, "ssc"); |
| |
| snd_soc_unregister_card(card); |
| atmel_ssc_put_audio(id); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id atmel_asoc_wm8904_dt_ids[] = { |
| { .compatible = "atmel,asoc-wm8904", }, |
| { } |
| }; |
| #endif |
| |
| static struct platform_driver atmel_asoc_wm8904_driver = { |
| .driver = { |
| .name = "atmel-wm8904-audio", |
| .owner = THIS_MODULE, |
| .of_match_table = of_match_ptr(atmel_asoc_wm8904_dt_ids), |
| }, |
| .probe = atmel_asoc_wm8904_probe, |
| .remove = atmel_asoc_wm8904_remove, |
| }; |
| |
| module_platform_driver(atmel_asoc_wm8904_driver); |
| |
| /* Module information */ |
| MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); |
| MODULE_DESCRIPTION("ALSA SoC machine driver for Atmel EK with WM8904 codec"); |
| MODULE_LICENSE("GPL"); |